Peter Barker
32659fd3b6
AP_HAL_SITL: correct return values on UARTDriver write call
2023-07-18 11:17:01 +10:00
Peter Barker
f288ba7cd0
AP_HAL_SITL: correct parsing of --rate on SITL commandline
...
it's in the help but not in the code...
2023-07-15 00:13:12 +10:00
Peter Barker
efc7b4b6ee
AP_HAL_SITL: remove race in SITL::UARTDriver::_write
...
txspace could change if another thread is involved
2023-07-13 18:13:42 +10:00
Andy Piper
d36149e1a8
AP_HAL_SITL: remove unused counter
2023-07-13 11:02:40 +10:00
Peter Barker
2c9551a25a
AP_HAL_SITL: act on safety switch being enabled in SITL by zeroing outputs
2023-07-12 17:53:12 +10:00
Andrew Tridgell
6e952bae17
HAL_SITL: allow override of serial devices in SITL periph
2023-07-12 17:06:02 +10:00
Andrew Tridgell
fca6f2cba2
HAL_SITL: fixed crash with command line args to SITL periph
2023-07-12 17:06:02 +10:00
Andrew Tridgell
4f81a40066
AP_HAL_SITL: moved UART port locking up to AP_HAL
2023-07-12 17:06:02 +10:00
rishabsingh3003
4957785fef
AP_HAL_STIL: add simulated nooploop tofsense rangefinder
2023-06-28 17:16:22 +10:00
Andrew Tridgell
3bcceb9420
HAL_SITL: fixed multicast UDP on cygwin
...
this will allow the SITL button on cygwin to work with multicast,
allowing for complex vehicle interactions between machines
2023-06-26 15:49:02 +10:00
muramura
bfa23aa7b0
AP_HAL_SITL: Resolve missing-declarations errors
2023-06-19 20:14:31 +10:00
acxz
ade161f0a8
AP_HAL_SITL: remove std:: scope from uint16_t
2023-05-17 11:15:43 +10:00
Peter Barker
ae7fb93e4c
AP_HAL_SITL: add simulated RPLidarA1
2023-05-16 10:15:23 +10:00
Peter Barker
4ed4c2d554
AP_HAL_SITL: add simulator for RDS02UF rangefinder
2023-05-13 20:05:18 +10:00
Jonathan Challinger
28598e82c0
AP_HAL_SITL: fix sitl_periph_gps build
2023-05-09 11:42:09 +10:00
Jonathan Challinger
4ef070956d
AP_HAL_SITL: ADC resolution configurable by define, default to 16 bit
2023-05-09 11:42:09 +10:00
Andy Piper
c0b008902f
AP_HAL_SITL: rename QSPIDevice to WSPIDevice
2023-04-28 08:31:15 +10:00
Andrew Tridgell
761297a068
AP_HAL_SITL: change to 16 bit timeout in event interface
...
prevent issues on 16 bit timers where we can end up with TIME_INFINITE
2023-04-19 17:26:57 +10:00
Andrew Tridgell
81b1b69cd5
HAL_SITL: fixed receive of CANFD in SITL socketcan
...
we need to use read() and look at the size to work out if each frame
is bxCAN of CANFD
See https://www.kernel.org/doc/Documentation/networking/can.txt
2023-04-10 14:46:54 +10:00
Andrew Tridgell
a960e647b5
HAL_SITL: fixed sitl periph storage
...
this allows persistent parameters for sitl_periph_gps target
2023-04-10 14:46:54 +10:00
Andrew Tridgell
b6ae79c700
HAL_SITL: fixed 64 bit periph build
2023-04-10 14:46:54 +10:00
Andrew Tridgell
baa7301977
HAL_SITL: fixed valgrind error
2023-04-08 07:11:23 +10:00
bugobliterator
b65c74940d
AP_HAL_SITL: setup for DroneCAN driver test build
2023-03-29 17:16:39 +11:00
Peter Barker
d626197c0b
AP_HAL_SITL: add and use a "bool read(c)" method to AP_HAL
...
this is much less likely to not work vs the int16_t equivalent
2023-03-22 17:59:11 +11:00
Samuel Tabor
49fb4f37c5
SITL: Send VCAS in Flightgear packet.
2023-02-20 05:37:21 -08:00
Peter Barker
ffa43c1b71
AP_HAL_SITL: avoid using struct Location
...
clang reports this could be a problem when compiling under some EABIs. Remove it from most places as it is just noise, replace with class where we want to avoid including Location.h
2023-02-04 22:51:54 +11:00
Andrew Tridgell
b43701fffa
HAL_SITL: exit on close of port 0 on cygwin
...
this fixes a long standing problem with SITL not exiting when you
close connection in MissionPlanner
2023-01-24 15:48:04 +11:00
Ian
636f9bffa9
AP_HAL_SITL: Add new SITL driver for Webots 2023a
...
The new SITL driver is based on the existing SITL driver for Gazebo and
does not require a JSON parser and implements set_interface_ports.
2023-01-22 18:19:38 +11:00
Peter Barker
ccf290246c
AP_HAL_SITL: use parameter to enable/disable SITL ESC telem
...
this is the perfect telemetry stream; we don't want to override other telemetry streams
2023-01-18 18:07:23 +11:00
Peter Barker
6c03134169
AP_HAL_SITL: use AP_CSVReader to read from Log serial-async dump
2023-01-17 11:21:48 +11:00
Andrew Tridgell
12c24df476
AP_HAL_SITL: added old_size to heap_realloc
2023-01-16 09:19:16 +11:00
Andrew Tridgell
a2b0bbffdb
HAL_SITL: implement SIM_UART_LOSS
2023-01-15 21:57:15 +11:00
Peter Barker
c728483a7e
AP_HAL_SITL: add option to create uart connection to file
2023-01-04 12:29:49 +11:00
Andy Piper
5ea3415a41
AP_HAL_SITL: allow SITL sketches to run
...
allow sketchname to be set
2022-12-28 18:14:56 +11:00
Andrew Tridgell
21b4a19c6f
HAL_SITL: implement CAN get_statistics()
2022-12-13 16:56:57 +11:00
Andrew Tridgell
1c554ccc24
HAL_SITL: only do the cygwin speedup hack for scripting while armed
...
this stops us chewing lots of CPU while disarmed, and also stops the
logging thread from chewing a lot of CPU
2022-11-10 12:12:03 +11:00
Andrew Tridgell
1488edb1d8
HAL_SITL: fixed sleep time with speedup
...
and removed sleep in threads for cygwin, as granulatity of sleep is
too high, resuling in very poor lua performance
2022-11-07 21:22:43 +11:00
Peter Barker
e7d30aefec
AP_HAL_SITL: include required AP_Vehicle_Type header
2022-11-02 18:35:48 +11:00
Andrew Tridgell
1871c6bef7
HAL_SITL: use motor mask for noise checking for motors
2022-10-16 20:38:19 +11:00
Peter Barker
0d5d9c04f0
AP_HAL_SITL: SITL SerialDevice optionally checks baudrates match
2022-09-28 20:53:34 +10:00
Yuri
20f0fd0589
AP_HAL_SITL: increase short board names to 23 chars
2022-09-21 17:56:42 +10:00
murata
64c60c8149
AP_HAL_SITL: Accurate 10 counts
2022-09-16 08:53:16 +10:00
Peter Barker
fb3a7d0d10
AP_HAL_SITL: do not return from reboot command
...
This structure was set up to mimic the should_exit code originally from the Linux HAL. It runs contrary to the intent of the HAL reboot call, which is not expected to return. This oddity leads us to emit wo acks sequentially, one success, one failure, which is just weird.
2022-09-14 21:23:18 +10:00
Andrew Tridgell
53997a284b
AP_HAL_SITL: fixes from --ubsan autotest
2022-09-06 10:49:50 +10:00
Jeffrey Laut
3133aff352
SITL: fix simulated RC failure while receiving RC overrides
2022-09-02 12:08:34 +10:00
Peter Barker
1c7e2f5094
AP_HAL_SITL: correct bind-value SIM_RC_FAIL handling
...
If SITL is not receiving any sitl rc input (so _sitl_rc_in.recv(...) is allways returns -1 then the bind-values code would never be crossed so the RC input values would remain at their initialisation values rather than honouring the SIM_RC_FAIL setting which says they should go to bind values (notably throttle-to-950)
2022-08-10 17:14:21 +10:00
Henry Wurzburg
e682296b58
AP_HAL_SITL: add TeraRange Neo Rangefinder
2022-08-09 09:01:34 +10:00
bugobliterator
8e81ee0292
AP_HAL_SITL: add support for starting node in maintenance mode
2022-07-27 18:18:03 +10:00
Andrew Tridgell
9b0c8674d6
HAL_SITL: catch ubsan errors into a log file
2022-07-12 11:00:08 +10:00
Andrew Tridgell
f55aadfedf
HAL_SITL: fixed undefined behaviour in GPIO
2022-07-12 11:00:08 +10:00
Andy Piper
061ddf7a3f
AP_HAL_SITL: save a sliding window of frequency bins
2022-06-01 15:49:32 +01:00
Iampete1
031115577a
AP_HAL_SITL: enable 32 servo outs
2022-05-22 12:07:37 +10:00
Clyde McQueen
25fd69b947
AP_HAL_SITL: init ArduSub pwm_output to [1500, ...]
...
Signed-off-by: Clyde McQueen <clyde@mcqueen.net>
2022-05-19 07:53:52 +10:00
Andrew Tridgell
7dc5da1247
HAL_SITL: cleanup SITL airspeed handling
...
fixed handling of EAS2TAS, and fixed ratio per sensor.
Removed the wind delay code (which was never being used). We should
add a generic delay filter if we need this again
2022-05-17 19:34:32 +10:00
Andrew Tridgell
a6cd7ffd20
HAL_SITL: fixed warning
2022-05-06 06:55:16 +10:00
Andy Piper
3199412bff
AP_HAL_SITL: add vector addition function
2022-05-04 17:05:51 +10:00
Andy Piper
63229d7eca
AP_HAL_SITL: correct disable channel maths
...
unilaterally write rcoutput to appease the sitl gods
2022-03-29 10:29:31 +11:00
Andrew Tridgell
f8aa4623ef
HAL_SITL: don't use terrain adjustment
2022-03-28 16:01:21 +11:00
bugobliterator
bd2bf7fedc
AP_HAL_SITL: add support for CANFD in SITL
2022-03-27 06:07:34 -07:00
Andrew Tridgell
535d7f0d85
AP_HAL_SITL: removed terrain home correction
2022-03-10 07:34:20 +11:00
Andrew Tridgell
5eb8b8d72e
HAL_SITL: support mavcan message forwarding
2022-02-12 16:36:05 +11:00
Andrew Tridgell
9fd25907e2
HAL_SITL: fixed mapping of --serial ports in SITL
...
uart paths are still in uartABCD order
2022-01-21 10:07:55 +11:00
Peter Barker
ee341bc4eb
SITL: add compilation option AP_SIM_CRSF_ENABLED
2022-01-15 21:56:33 +11:00
Peter Barker
08b8d3ad34
AP_HAL_SITL: correct compilation when SIM options disabled
...
AP_HAL_SITL: use AP_ASIM_GIMBAL_ENABLED
AP_HAL_SITL: use AP_SIM_ADSB_ENABLED
AP_HAL_SITL: use AP_SIM_RPLIDARA2_ENABLED
AP_HAL_SITL: use AP_SIM_PS_LIGHTWARE_SF45B_ENABLED
AP_HAL_SITL: use AP_SIM_PS_TERRARANGERTOWER_ENABLED
AP_HAL_SITL: use AP_SIM_AIS_ENABLED
AP_HAL_SITL: use AP_SIM_JSON_MASTER_ENABLED
2022-01-15 17:37:24 +11:00
Pierre Kancir
6584fef711
AP_HAL_SITL: catch more signal for correct exit
...
SIGINT is for ctrl-c
SIGHUP and SIGQUIT are use within term. If the term close before SITL, it will trigger one of those and then exit cleanly anyway
2022-01-12 12:31:56 +11:00
Shiv Tyagi
af950e266b
AP_HAL_SITL: add dataflash to spi device table
...
We simulate jedec flash for logging. Hence, we need to add dataflash to device table. Also, we need to remove HAL_LOGGING_SITL_ENABLED since we no longer need it
Co-Authored-By: Divyateja Pasupuleti <divyateja2004@gmail.com>
2021-12-25 09:14:31 +11:00
Andy Piper
fa91e74fde
AP_HAL_SITL: remove redundant harmonics from DSP
2021-12-22 18:13:38 +11:00
Peter Barker
fbe46f400f
AP_HAL_SITL: stop passing home_str to _sitl_setup
...
This is poked into the model now
2021-12-13 09:30:33 +11:00
Peter Barker
2f77fef10e
AP_HAL_SITL: permit float-equal while we do comparison vs INFINITY
2021-12-13 08:38:17 +11:00
Peter Barker
acbe567202
AP_HAL_SITL: consolidate rangefinder range calculations
2021-12-11 20:10:10 +11:00
Peter Barker
6e8c7c6b03
AP_HAL_SITL: remove unused mag-data delay buffer state variables
...
This delay buffer code is now in AP_Compass_SITL
2021-12-07 16:41:11 +11:00
Peter Barker
cce14d8461
AP_HAL_SITL: remove unused _home_str member
2021-12-07 09:36:22 +11:00
Peter Barker
8cc7f51de1
AP_HAL_SITL: tidy set/get of hw RTC
2021-12-06 12:58:43 +11:00
Peter Barker
11cbd68296
AP_HAL_SITL: remove incorrect use of ARRAY_SIZE
...
This was converted to a linked list....
2021-11-24 18:26:17 +11:00
Peter Barker
cdccc67fb8
AP_HAL_SITL: make SITL::ADSB a SITL::SerialDevice
2021-11-23 11:09:29 +11:00
Andrew Tridgell
3b3abdeef0
AP_HAL_SITL: support up to 9 UARTs
2021-11-22 22:48:59 +11:00
Peter Barker
eb6da9512f
AP_HAL_SITL: quieten i2c-device-creation diagnostics
2021-11-12 10:17:28 +11:00
bugobliterator
09096cb355
AP_HAL_SITL: add get_storage_ptr method
2021-11-10 17:21:35 +11:00
Peter Barker
9ebd0cdeed
AP_HAL_SITL: use SITL::SerialDevice in place of pipe for communication
2021-11-06 16:54:07 +11:00
Peter Barker
02dc42275c
AP_HAL_SITL: remove unused/unimplemented methods/vars, tidy namespacing
2021-10-28 09:09:44 +11:00
Andrew Tridgell
8192661042
AP_HAL_SITL: rename uLanding simulation to USD1
2021-10-26 15:31:12 +11:00
Peter Barker
cf9bbb570c
AP_HAL_SITL: correct nullptr check on simulated mavlink rangefinder
...
Obvious copy/paste error
2021-10-22 21:46:01 +11:00
Peter Barker
1ab8a3e3aa
AP_HAL_SITL: make simulated GPS work as a SerialDevice
2021-10-21 12:09:21 +11:00
Peter Barker
99e80549b1
SITL: move sitl_gps.cpp to SIM_GPS.cpp
2021-10-21 12:09:21 +11:00
Stephen Dade
1356beb14d
AP_HAL_SITL: Add instance to ADSB simulation
2021-10-20 20:21:33 +11:00
Peter Barker
21030c4e83
AP_HAL_SITL: remove written-only AP::sitl().update_rate_hz
2021-10-20 19:07:17 +11:00
Peter Barker
8c9ade3f7f
AP_HAL_SITL: move simulated megasquirt to SerialDevice framework
2021-10-17 10:00:08 +11:00
Asa Davis
85fbbe0704
SITL: add simulator for LORD Microstrain serial EAHRS
2021-10-17 08:55:03 +11:00
Peter Barker
f5d5387358
AP_HAL_SITL: remove unused ext_fifo_fd member variable
2021-10-12 20:07:19 +11:00
Peter Barker
67226433e3
AP_HAL_SITL: add simulated RAMTRON device
2021-10-12 20:01:49 +11:00
Peter Barker
58a7f022fd
AP_HAL_SITL: add simulated SPI devices
2021-10-12 20:01:49 +11:00
Peter Barker
d98cda12c6
AP_HAL_SITL: remove HIL_MODE vestiges
2021-10-12 08:57:05 +11:00
Peter Barker
521918d74c
SITL: remove set-but-not-used _framerate member variable
2021-10-08 14:23:18 +11:00
Iampete1
9f04cded3b
AP_HAL_SITL: AnalogSource: return bool for set_pin
2021-10-06 18:42:51 +11:00
Peter Barker
402669f269
AP_HAL_SITL: add and use HAL_SITL &hal_sitl
...
analogous to our normal "extern hal" stuff but removes need for casting
2021-10-05 22:24:38 +11:00
Peter Barker
3292128531
AP_HAL_SITL: allow for selection of Storage backend type at runtime
2021-10-05 10:16:54 +11:00
Andrew Tridgell
9a29f2558c
HAL_SITL: fixed cygwin build
...
cygwin does not handle panic being weak, it gets a link error
2021-10-03 14:00:34 +11:00
Peter Barker
6bd2bc2179
AP_HAL_SITL: remove mtk GPSs
...
These are ancient and of very poor quality.
2021-09-29 17:28:59 +10:00
Josh Henderson
328cf01436
AP_HAL_SITL: make panic() WEAK
2021-09-28 09:11:48 +10:00
Peter Barker
9c24916115
AP_HAL_SITL: move from HAL_NO_GCS to HAL_GCS_ENABLED
2021-09-22 21:37:00 +10:00