Andrew Tridgell
|
17d804f051
|
HAL_ChibiOS: fixed GPIO numbering for KakuteF4
|
2019-02-22 11:34:43 +11:00 |
|
Stephen Dade
|
de37e2e179
|
HAL_ChibiOS: Corrected servo output order for KakuteF4
|
2019-02-22 11:34:43 +11:00 |
|
Andrew Tridgell
|
70a10c6375
|
HAL_ChibiOS: adjust TBS-F7 bootloader setup
|
2019-02-22 10:27:17 +11:00 |
|
Andrew Tridgell
|
5319fbb52b
|
HAL_ChibiOS: enable heater pin on TBS-Colibri-F7
|
2019-02-22 10:27:17 +11:00 |
|
Andrew Tridgell
|
dde97d2b0e
|
HAL_ChibiOS: support FMU heater pins
|
2019-02-22 10:27:17 +11:00 |
|
Andrew Tridgell
|
27a1fec911
|
HAL_ChibiOS: TBS-F7 is active low on sd power
|
2019-02-22 10:27:17 +11:00 |
|
Andrew Tridgell
|
94bace91a4
|
HAL_ChibiOS: bring up sensors rail after boot on TBS F7
this prevents a reset loop on GPIO config
|
2019-02-22 10:27:17 +11:00 |
|
Andrew Tridgell
|
025bd7e0d8
|
HAL_ChibiOS: added support for TBS-Colibri-F7
This is a fmuv5 board varient
|
2019-02-22 10:27:17 +11:00 |
|
Peter Barker
|
8cfedd8b46
|
AP_HAL_ChibiOS: implement 'uint16_t millis16'
|
2019-02-19 11:17:04 +11:00 |
|
Andrew Tridgell
|
54ffeef20e
|
HAL_ChibiOS: fixed pixhawk4 i2c bus numbers
|
2019-02-12 15:20:36 +11:00 |
|
Andrew Tridgell
|
5ab75b5ccb
|
HAL_ChibiOS: updated Pixhawk4 pinout
|
2019-02-12 15:17:27 +11:00 |
|
Tom Pittenger
|
548a579f18
|
AP_HAL_ChibiOS: unify singleton naming to _singleton and get_singleton()
|
2019-02-10 19:09:58 -07:00 |
|
Andrew Tridgell
|
ee97f0dccd
|
HAL_ChibiOS: setup power brick on mini-pix by default
|
2019-02-10 19:51:51 +11:00 |
|
Andrew Tridgell
|
bb76143095
|
HAL_ChibiOS: fixed mini-pix uart order
|
2019-02-04 08:21:58 +11:00 |
|
Siddharth Purohit
|
2792f015b9
|
HAL_ChibiOS: disable SLCAN for minimize feature enabled
|
2019-01-29 13:40:35 +09:00 |
|
Andrew Tridgell
|
ff52ceabba
|
HAL_ChibiOS: fixed default volt and current pins for VRBrain
|
2019-01-24 18:41:38 +11:00 |
|
LukeMike
|
e15d2c0f89
|
HAL_ChibiOS: added ChibiOS configuration of VR Brain 5.4
|
2019-01-24 18:41:38 +11:00 |
|
LukeMike
|
33f7f5b7b6
|
HAL_ChibiOS: added ChibiOS configuration for VR Core 1.0
|
2019-01-24 18:41:38 +11:00 |
|
LukeMike
|
f615ab9a0a
|
HAL_ChibiOS: added ChibiOS configuration for VR Brain 5.1
|
2019-01-24 18:41:38 +11:00 |
|
LukeMike
|
db61e50fe8
|
HAL_ChibiOS: fixed USB_PRODUCT for VR Brain 5.2
|
2019-01-24 18:41:38 +11:00 |
|
Siddharth Purohit
|
e12cb58b21
|
HAL_ChibiOS: run code formatter on CANSerialRouter
|
2019-01-23 15:57:05 +11:00 |
|
Siddharth Purohit
|
e1a9094bf6
|
HAL_ChibiOS: CANSerialRouter allow for changing serial port for the same boot
|
2019-01-23 15:57:05 +11:00 |
|
Siddharth Purohit
|
a6b01901f1
|
HAL_ChibiOS: flush serial bus during switching to and from SLCAN
|
2019-01-23 15:57:05 +11:00 |
|
Siddharth Purohit
|
664c952460
|
HAL_ChibiOS: disable code for CAN for non UAVCAN supported
|
2019-01-23 15:57:05 +11:00 |
|
Siddharth Purohit
|
f6d165d8c1
|
HAL_ChibiOS: CANSerialRouter unlock the port in timer
|
2019-01-23 15:57:05 +11:00 |
|
Siddharth Purohit
|
b5fbdc9888
|
HAL_ChibiOS: invoke serial data event signal for non dma ports as well
|
2019-01-23 15:57:05 +11:00 |
|
Siddharth Purohit
|
32a71cef92
|
ChibiOS: add support for timeout and closing SLCAN
|
2019-01-23 15:57:05 +11:00 |
|
Siddharth Purohit
|
5cefd251f9
|
ChibiOS: add CAN to Serial bus router
|
2019-01-23 15:57:05 +11:00 |
|
Siddharth Purohit
|
8f964b08b0
|
ChibiOS: move CAN driver code into HAL
|
2019-01-23 15:57:05 +11:00 |
|
Andrew Tridgell
|
18e97bd895
|
HAL_ChibiOS: fixed CAN on Pixhawk4 and PH4-mini
the silent pins floating disabled CAN
|
2019-01-23 13:24:13 +11:00 |
|
Andrew Tridgell
|
f98bfb1a35
|
HAL_ChibiOS: enable flash logging on Omnibus and speedybeef4
|
2019-01-23 09:00:42 +11:00 |
|
Andrew Tridgell
|
c9bab2f36e
|
HAL_ChibiOS: enable dataflash logging on AirbotF4
|
2019-01-21 21:57:21 +11:00 |
|
Andrew Tridgell
|
7219ec3482
|
HAL_ChibiOS: enabled df logging on revo and sparky2
|
2019-01-21 21:57:21 +11:00 |
|
Andrew Tridgell
|
2882e5d5e1
|
HAL_ChibiOS: enable dataflash logging on KakuteF4
|
2019-01-21 21:57:21 +11:00 |
|
Andrew Tridgell
|
2765f6e8f0
|
HAL_ChibiOS: setup APJ board IDs in environment
|
2019-01-19 17:19:41 +11:00 |
|
Peter Barker
|
6fc76a32af
|
GLOBAL: use AP::logger() and strip redundant Log_ from methods
|
2019-01-18 18:08:20 +11:00 |
|
Peter Barker
|
b47733142f
|
GLOBAL: rename DataFlash_Class to AP_Logger
|
2019-01-18 18:08:20 +11:00 |
|
Andrew Tridgell
|
b8aa6e5834
|
HAL_ChibiOS: rename VRBrain hwdef folders
nicer names in fw download
|
2019-01-18 11:49:19 +11:00 |
|
LukeMike
|
aa0a2aaba2
|
HAL_ChibiOS: final base configuration of the Brain VR Micro Brain 5.1.
- Bootloader (32k) - Tested
- 3 UART (GPS, Telemetry and AUX - debug enable on Telemetry) - Tested
- MS5611 driver - Tested
- MPU600 driver - Tested
- HMC5883 External - Tested
- SD Card - Tested
- Parameters on Flash (32k reserved) - Tested
- Buzzer (no timer available for tonealarm) - Tested
- External LEDs (Arm and GPS) - Tested
- OnBord LEDs - Tested
- 2 Relay (from 33 to 34) - Tested
- Voltage Battery Monitor - Tested
- 14 PWM available (GPIO mapped from 50 to 63) - Tested
|
2019-01-18 11:49:19 +11:00 |
|
LukeMike
|
9f3b57f7eb
|
HAL_ChibiOS: final base configuration of the Brain VR board 5.2.
- Bootloader (16k) - Tested
- 3 UART (GPS, Telemetry and AUX - debug enable on Telemetry) - Tested
- MS5611 driver - Tested
- MPU600 driver - Tested
- HMC5883 Internal and External - Tested
- SD Card - Tested
- RAMTRON - Tested
- Buzzer (no timer available for tonealarm) - Tested
- External LEDs (Arm and GPS) - Tested
- OnBord LEDs - Tested
- 3 Relay (from 33 to 35) - Tested
- Voltage and Current Battery Monitor - Tested
- 14 PWM available (GPIO mapped from 50 to 63) - Tested
|
2019-01-18 11:49:19 +11:00 |
|
LukeMike
|
2146368e7c
|
HAL_ChibiOS: added ChibiOS support for VR Micro Brain 5.1
|
2019-01-18 11:49:19 +11:00 |
|
LukeMike
|
13d1d281e1
|
HAL_ChibiOS: added ChibiOS support for VR Brain 5.2
|
2019-01-18 11:49:19 +11:00 |
|
Nigel Williams
|
071dca8fe8
|
HAL_ChibIOS: Fix INS default rotation for OmnibusNanoV6
This makes the default orientation match betaflight (i.e. USB
connector top of the board at the front, ESC connector bottom of the
board to the rear).
|
2019-01-18 11:00:43 +11:00 |
|
Andrew Tridgell
|
17d62be9bb
|
HAL_ChibiOS: disable USART6_TX on fmuv5
this prevents it acting as a pullup on SBUS input for Pixhawk4. Thanks
to David Sidrane for the suggestion.
|
2019-01-18 10:24:27 +11:00 |
|
Andrew Tridgell
|
155ccdd6e1
|
HAL_ChibiOS: added extra LEDs for CUAVv5
|
2019-01-17 12:29:44 +11:00 |
|
Michael du Breuil
|
3aee083540
|
AP_HAL_ChibiOS: Fix FMUv2 LED lighting up
|
2019-01-11 17:45:43 +11:00 |
|
murata
|
6bb11b5cc8
|
HAL_ChibiOS: Get the number of characters in strlen
|
2019-01-09 10:12:51 +11:00 |
|
Michael du Breuil
|
e8373e1fdf
|
AP_HAL_ChibiOS: add scripting heap
|
2018-12-31 19:25:23 -07:00 |
|
Andrew Tridgell
|
ed3194d095
|
HAL_ChibiOS: fixed timer reset
|
2018-12-31 08:00:14 +11:00 |
|
Andrew Tridgell
|
960d4c0a80
|
HAL_ChibiOS: allow mount of microSD after boot
when disarmed, try to mount sd card every 3s
|
2018-12-31 08:00:14 +11:00 |
|