Jason Short
76dd79e7b5
Made RTL hold position until it reaches altitude
2012-01-07 22:27:26 -08:00
Jason Short
ee0551037e
Revved to R7
2012-01-06 10:22:53 -08:00
Jason Short
17873eb09c
Changed default throttle type for failsafe to avoid checking
...
changed timer to 20 seconds.
2012-01-06 10:20:31 -08:00
Jason Short
e116636fe9
Auto_land update
2012-01-05 21:57:34 -08:00
Jason Short
e3c16fc1b1
Added auto_land to RTL
2012-01-05 21:15:12 -08:00
Jason Short
20661e5020
timer set to unsigned
2012-01-04 17:31:20 -08:00
Andrew Tridgell
596a1f43f4
ACM-simple: don't use uninitialised simple trig values
2012-01-05 10:13:36 +11:00
Jason Short
ed1ff0b171
Upped Revision
2012-01-04 09:28:38 -08:00
Jason Short
76cfdca6cc
Cleaned up and documented each global vavriable
...
Added Wind compensation for Stability
Acro mode fixes
2012-01-04 09:28:37 -08:00
Jason Short
b3cea96970
Cosmetic
2011-12-31 10:54:31 -08:00
Jason Short
ea832c0818
upped to r5
2011-12-31 10:05:13 -08:00
Jason Short
1ef7f9fe62
Loiter I reset
2011-12-31 09:45:25 -08:00
Jason Short
0ace8474d7
R4
2011-12-30 23:54:02 -08:00
Jason Short
28984a72e4
no longer calling reset_nav
2011-12-30 23:48:04 -08:00
Jason Short
c7f93f8718
Updated Configs based on field testing.
2011-12-30 23:48:04 -08:00
Jason Short
84d3e3135f
Added Nav_bearing, just like APlane
...
added fix for LOITER in missions so we don't Yaw in circles
2011-12-30 23:48:04 -08:00
Jason Short
3ea49e1415
updated rev
2011-12-29 23:02:41 -08:00
Jason Short
95a70cf32e
lowered to nav_lat and nav_lon int16
...
added a version that didn't have I term added to get a better indication of velocity estimation
2011-12-29 23:02:03 -08:00
Jason Short
6f42442e57
Added 5 sec Takeoff Timer to clear i terms when lifting
...
Moved loiter relocation function to update_nav
moved User hooks to correct place
Added tuning for D term
2011-12-29 23:02:03 -08:00
Randy Mackay
bbe6dea980
OptFlow - initial support for APM2 (there are still problems) including adding ability to set Chip Select pin.
...
Other unrelated changes are:
a) fixed typo in 'esitmate_velocity' to 'estimate_velocity'.
b) moved init_compass from system.pde to sensors.pde which seemed consistent with other sensors.
2011-12-30 12:06:31 +09:00
Andrew Tridgell
955dfe0226
ACM: check compass health before using it
2011-12-28 20:41:53 +11:00
Andrew Tridgell
03a16c6e45
ACM: use new I2C library
2011-12-28 20:41:53 +11:00
Jason Short
234121f3c3
Fix for 11 channels of motors.
2011-12-26 14:39:01 -08:00
Jason Short
0491d4feca
added define for optflow
2011-12-23 18:45:01 -08:00
Jason Short
d9590a44d6
Fixed merge issues
2011-12-23 14:51:40 -08:00
Jason Short
62cb407558
Begin to better integrate OptFlow, added necessary globals for Loiter estimation
2011-12-23 14:42:50 -08:00
Jason Short
239eb53983
change Alpha name
2011-12-18 16:38:07 -08:00
Jason Short
47e4c875e1
Cleanup
...
removed Iterm experiment - no noticeable effect in actual flight
2011-12-16 20:47:23 -08:00
Andrew Tridgell
f6f808357c
removed AperiodicProcess code
...
this code was never being used, and was more complex than it was
worth.
2011-12-17 07:29:09 +11:00
Jason Short
2fc25d963d
renamed super simple, added framework for auto calc of throttle cruise
2011-12-15 20:51:41 -08:00
Jason Short
f48e394511
made the last step of landing stop navigating so we can drop straight down.
2011-12-14 22:08:41 -08:00
Jason Short
8691b10ee9
added failsafe check,
...
enable loiter repositioning
2011-12-14 22:08:41 -08:00
Andrew Tridgell
888d6226b2
fixed two more CONFIG_HARDWARE #ifdef bugs
2011-12-13 17:05:48 +11:00
Jason Short
e4559bbf5c
Added param option for Simple mode reset
2011-12-12 17:47:45 -08:00
Andrew Tridgell
d076fb54b5
fixed barometer detection on APM2
2011-12-12 15:45:36 +11:00
Pat Hickey
a48c65b5b5
ArduCopter: update AP_Baro constructors & initializers
2011-12-11 15:21:10 -08:00
Pat Hickey
6dbd6b4181
ArduCopter: Get barometer data in terms of AP_Baro interface
...
* Major change: Log.pde Log_Write_Control_Tuning has changed significantly
* MS5611 has no concept of RawPres and _offset_press
* Log the get_pressure() instead. (If we don't trust the barometer, what's the point?)
2011-12-11 15:21:10 -08:00
Pat Hickey
b055aa6f81
ArduCopter: instantiate correct AP_Baro object based on CONFIG_BARO
2011-12-11 15:21:09 -08:00
Pat Hickey
de6507a47d
ArduCopter: Rename APM_BMP085 classes to AP_Baro_BMP085 classes.
2011-12-11 15:21:09 -08:00
Randy Mackay
67855b207d
Arducopter, RangeFinder - added SONAR_TYPE parameter and properly support the XL (default), LV and long distance XL (aka XLL) sonar types
2011-12-11 16:40:59 +09:00
Jason Short
4659a9ffce
Adjust Simple mode on the fly.
2011-12-10 23:29:29 -08:00
Jason Short
84b72b627b
Added SIMPLE mode reset outside of bounding box of 10M, will do more testing before enabling.
2011-12-10 10:19:20 -08:00
Jason Short
7cecca74bc
Made Baro_alt int32_t
...
Added home to copter bearing, home to copter distance
Added Land mode
2011-12-10 10:19:20 -08:00
Jason Short
76d60a2111
Added Home Bearing
2011-12-10 10:19:20 -08:00
Jason Short
05409b8c1c
made RateP range a little more sensible
...
removed unused var
2011-12-06 21:03:07 -08:00
Jason Short
a632c49b44
Alt_hold_patch, removed Z dampening from Manual override. Fixed integrator conversion to throttle_cruise
2011-12-04 21:32:33 -08:00
Jason Short
e8a14c8d93
simple patch to improve alt hold based on stability patch
2011-12-04 21:32:33 -08:00
Jason Short
c99da66506
Formatting, swicth Omega to raw IMU rates
2011-12-03 15:29:33 -08:00
Michael Oborne
edf3195384
add 1hz mavlink loop.
2011-12-04 06:32:08 +08:00
Jason Short
ce5ad442fc
Git Test
2011-11-28 10:54:20 -08:00
Jason Short
82adf1df6b
removed need to send increment flag to update commands
...
constrained climb_rate value
2011-11-28 10:33:06 -08:00
Pat Hickey
6ee477bd8d
ArduCopter: rev version number from 2.0.51 to 2.1.0 Alpha
2011-11-25 20:00:19 -08:00
Andrew Tridgell
38c85c44ae
ArduCopter: rename purple to APM2
2011-11-25 20:00:19 -08:00
Andrew Tridgell
3a542b3ef3
USB-MUX: enable USB MUX switching for ArduCopter
2011-11-25 20:00:19 -08:00
Andrew Tridgell
ffba37d599
desktop: first version of register level SITL support
...
this adds register level emulation of the ADS7844 and the RC
input/output hardware on the APM1, allowing for SITL testing without
enabling HIL in the code
2011-11-25 20:00:18 -08:00
Andrew Tridgell
41caa949ca
fixed InertialSensor stub build
2011-11-25 20:00:18 -08:00
Pat Hickey
1d50bb80fd
hil-sensors ArduCopter: fixes to make hil-sensors build work properly
...
* requires new stub libraries for InertialSensor and PeriodicProcess.
2011-11-25 20:00:18 -08:00
Andrew Tridgell
1c20efe4b8
re-organiser sensor declarations
...
this tries to make the #ifdef nesting easier to understand
2011-11-25 20:00:17 -08:00
Andrew Tridgell
c0898ab3b9
purple: timer_scheduler should be in all builds
2011-11-25 20:00:17 -08:00
Pat Hickey
660174e610
purple: switch ArduCopter to new sensor objects
...
this uses the new sensor abstractions for the purple/APM1 hardware
choice
2011-11-25 20:00:16 -08:00
Jason Short
abe4758c3b
no longer using the raw pressure
2011-11-25 11:34:05 -08:00
Jason Short
c5c5884006
v number
2011-11-21 22:13:18 -08:00
Jason Short
89e014c06a
Added alternate alt hold,
...
New ESC Calibration Routine
2011-11-21 22:12:19 -08:00
Jason Short
fbf09dbf2d
Made save WP the default
...
Cosmetic updates
2011-11-20 12:50:12 -08:00
Randy Mackay
f397bae793
ArduCopter Alt Hold - Change to not run get_nav_throttle if manually adjusting altitude with manual_boost - removes possibility of I term running up
...
Tuning - added ability to modify altitude (position, not rate) controller
TradHeli - Fairly large change to how throttle is scaled and collective moves.
2011-11-20 22:30:42 +09:00
Jason Short
185c2a50ce
added some params from Arduplane to make Mavlink upgrade easier
...
made loiter radius smaller in storage
2011-11-20 00:22:53 -08:00
Jason Short
b6adfdb62f
missed ==
2011-11-19 14:42:57 -08:00
Jason Short
579096cd2e
return to prev climb rate calc
2011-11-19 13:58:41 -08:00
Jason Short
a168691eba
Working implementation of Jump Command
2011-11-16 21:28:56 -08:00
Jason Short
5ed931c582
Mission Scripting re-write
2011-11-16 00:22:22 -08:00
Jason Short
3eaef4081c
Added better navigation flag for more accurate dtnav timing
...
Added better support for climb rate in SIM
2011-11-16 00:22:22 -08:00
Jason Short
2ad1294514
scaling width of circle mode to make it more round.
2011-11-13 23:09:42 -08:00
Jason Short
be1007d032
Moved updated alt to GPS so the climb rate is sane
2011-11-13 22:54:57 -08:00
Jason Short
349ab7e0c6
slowed Circle flight
2011-11-13 13:41:23 -08:00
Jason Short
e1315b1ab8
Update and fix for Circle mode
...
HIL updates for altitude
2011-11-12 21:43:21 -08:00
Jason Short
8ad94b9993
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2011-11-09 22:56:52 -08:00
Jason Short
ae1684a37c
crosstrack angle variable
2011-11-09 22:56:38 -08:00
Andrew Tridgell
c056c4f0cb
HIL: allow for fast HIL attitude update in HIL_MODE_ATTITUDE
...
this runs it at the full loop rate
2011-11-10 13:17:06 +11:00
Jason Short
1ab1d8bab4
Fixes for Sim - Missing climb rate calculation
2011-11-08 10:46:52 -08:00
Andrew Tridgell
28634f51b7
ArduCopter: use specific sized data types in a lot of places
...
this will make the Desktop build more consistent with the real AVR
build, and also with a future ARM build
2011-11-08 11:05:36 +11:00
Andrew Tridgell
3176d4ffc5
HIL: enable CTUN log message in ATTITUDE HIL
2011-11-08 07:58:35 +11:00
Jason Short
3a37e7fe60
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2011-11-06 22:46:57 -08:00
Jason Short
a37fadbedb
moved to 200hz update
...
Zccel Z updates from Aurelio in attitude.pde
lowered baro_alt sanity check
moved user hooks to the medium 10hz loop.
2011-11-06 22:46:39 -08:00
unknown
9c59fdfdd6
AltHold - another correction to the manual boost. Hopefully properly transferring building up I terms to g.throttle_cruise
2011-11-06 19:06:13 +08:00
unknown
32057fb3c9
AltHold - made TradHeli code also use manual_boost
2011-11-06 18:25:13 +08:00
unknown
755cb4b201
Altitude hold bug fix - changed g.throttle_cruise to be updated to steal I term from correct controller
2011-11-06 17:47:24 +08:00
Jason Short
c8304114a3
renamed some command variables to align with Arduplane
...
reworked the arming code and moved the DCM gains out.
updated climb_rate to include sonar data.
2011-11-04 21:41:51 -07:00
Jason Short
3f211121fe
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2011-11-01 21:18:56 -07:00
Jason Short
27fc6eea10
Z dampener
...
Integrated Aurelio R. Ramos' Z dampening code.
2011-11-01 21:18:47 -07:00
Andrew Tridgell
acc03753ab
fixed HIL build
2011-11-02 08:14:07 +11:00
Jason Short
c32a707632
cleanup
2011-11-01 09:28:36 -07:00
Jason Short
ab1de277dc
altered the interactive throttle to be more aggressive and proportional.
...
reworked baro reading strategy.
2011-11-01 09:24:51 -07:00
unknown
c253996ea9
TradHeli - added TUNE value 13 to allow adjusting of external gyro gain using channel 6
2011-10-29 20:34:21 +09:00
unknown
ea66c74ff0
TradHeli - added throttle scaling and heli specific angle_boost function that takes into account that heli's main blades can have -ve pitch.
2011-10-29 17:27:43 +09:00
Jason Short
07daf34ccc
Added a slew rate to the alt change rate.
...
Added better reporting of throttle control
upped constraints for alt hold
Additional logging for CTUN lay hold
2011-10-28 21:29:10 -07:00
Jason Short
46590e5f28
Log updates
...
Added motor logging for different frame types. Switched the PM log to some new debugging values and speed up the writing of the value to the logs.
2011-10-27 22:36:25 -07:00
Jason Short
04b5776601
50 rev
...
Work in progress, revved the EEPROM
2011-10-27 12:42:28 -07:00
Jason Short
c8c26d8193
added boost scalar arguments
...
removed accel math from Trig function into Attitude.pde
2011-10-27 12:33:19 -07:00
Jason Short
4be2776b17
Added Andrew's user hooks.
2011-10-15 15:29:33 -07:00
Jason Short
142707711e
Updates to guided mode from Michael O.
...
removed or commented unused static vars
2011-10-15 13:09:04 -07:00