Peter Barker
6944ef6af1
autotest: fly each working Helicopter frame
2021-06-09 12:15:42 +10:00
James O'Shannessy
bc38d8a78c
AutoTest: Fix autotest from failing due to state from earlier test
...
Autotest was failing because there was an expectation that the plane would fly relatively north from the takeoff point.
This assumption may not be true. We work around it by using a tin can instead of an exclusion polygon so that we breach no matter the direction we fly.
2021-05-05 10:59:10 +10:00
James O'Shannessy
0e656c1504
AutoTest: Ensure Plane uses home as Fence Return Point if one is not present and no exclusion fence is present
2021-05-05 10:59:10 +10:00
Iampete1
aa72b7da46
Tools: autotest: Plane: add loiter terrain following test
2021-05-02 18:51:27 +10:00
Peter Barker
0ee0228883
autotest: fix flapping fly-home-land-and-disarm
...
One of the tests just happened to be within acceptance radius of
waypoint 8 - so when we set that as a waypoint we never saw it actually
be our waypoint so the set_waypoint failed
2021-04-20 23:04:24 +10:00
Peter Barker
fff4aa8bde
autotest: increase allowed time for climb_before_turn to get home
2021-04-01 19:11:31 +11:00
Peter Barker
30ebe6cde9
autotest: augment test DO_AUX_FUNCTIION test for FAILED AND DENIED
2021-03-31 11:36:09 +11:00
Peter Barker
b55094fef4
autotest: Test triggering Auxillary Functions via mavlink
2021-03-31 11:36:09 +11:00
Peter Barker
462ac255a3
autotest: start MAVProxy only as needed for testing
2021-03-19 09:46:45 +11:00
Stavros Korokithakis
f6fc6d22da
autotest: Fix the climb-before-turn test
2021-03-18 07:37:21 +11:00
Peter Barker
0c7f3d20a4
autotest: fix attitude test
...
autotest: add a get_messages_frame method
Attempts to get a set of messages as close as reasonable in time.
2021-03-16 14:19:44 +11:00
Stavros Korokithakis
29043d62e9
Add FLIGHT_OPTION to climb before RTL
2021-03-16 11:58:47 +11:00
Hwurzburg
d15e01d390
Plane: fix DO_CHANGE_SPEED airspeed to impact only AUTO and GUIDED modes
2021-03-16 10:09:34 +11:00
Peter Barker
eb702b0f82
Tools: add support for ATTITUDE_QUATERNION
2021-03-13 09:44:12 +11:00
Peter Barker
f78d7c3b25
autotest: add option to not check current wp after set_current_wp
...
Sometimes a waypoint is set which we'll never emit as our current
waypoint (e.g. a JUMP)
2021-03-10 09:12:39 +11:00
Peter Barker
4a251bebbd
autotest: fix fly_home_land_and_disarm; wp 7 is never current wp
...
This is never a current waypoint, so we can't wait for it
2021-03-10 09:12:39 +11:00
Peter Barker
bdeadce95b
autotest: improve deadreckoning test
...
autotest: use location_offset rather than coordinates in Deadreckoning test
2021-03-05 21:34:58 +11:00
Peter Barker
425ab1358a
autotest: tidy streamrate handling
...
Stop setting MAVProxy stream rates; these are neither here-nor-there now as MAVProxy will only modify its own connection's streamrates now
Stop doing the set-streamrate dance to work around MAVProxy's
set_streamrate algorithms.
Remove useless and misleading set of streamrate in Plane test; we reset
streamrates on the reboot immediately following this set. Considering
the streamrate was never eset this was a good thing.
2021-03-05 21:34:58 +11:00
James O'Shannessy
bcc0da9c47
AutoTest: Adds additional autotests to capture mode change while breached
...
AutoTest: Adds test for fence breach switching to guided mode when no fence return point is present. In upstream, this results in a vehicle fly-away.
2021-03-05 14:52:46 +11:00
James O'Shannessy
dac5996d93
AutoTest: Fix autotest conflicts after rebase on upstream
2021-03-05 14:52:46 +11:00
James O'Shannessy
fa7be629e5
AutoTest: Make fence tests flake8 compliant
2021-03-05 14:52:46 +11:00
James O'Shannessy
2353b55452
AutoTest: Address race conditions in changes to fence tests
2021-03-05 14:52:46 +11:00
James O'Shannessy
76a2a76b54
AutotTest: Adds autotests for Plane to test RetRally flag added to AC_Fence
2021-03-05 14:52:46 +11:00
James O'Shannessy
8545715837
AutoTest: Add Static Fence Tests for unallowed arming when breaching geofence
2021-03-05 14:52:46 +11:00
James O'Shannessy
6f7ba3b037
AutoTest: Ensure fence is disabled at end of throttle_failsafe_fence test
2021-03-05 14:52:46 +11:00
James O'Shannessy
bbd606b8b5
AutoTest: Corrections to autotests
2021-03-05 14:52:46 +11:00
James O'Shannessy
47e76a1807
AutoTest: Move fence enable/disable to common location
2021-03-05 14:52:46 +11:00
James O'Shannessy
215901be30
Autotest: Correct the logic for fence based autotest functions
...
Adds corrections to enabling fence using aux function.
Correctly test fences statically. Only uploaded fences can be checked using a fence file, so we check those first. Then we add steps to check tin can, max and minm all set the fence as present, as expected.
Plane will support MAV_PROTOCOL_CAPABILITY_MISSION_FENCE, so we assert that it does support it.
To test ceiling and floor, leverage some existing functions for takeoff, change altitude and land. Check for respective breach.
Add a floor breach check to copter.
2021-03-05 14:52:46 +11:00
James O'Shannessy
1a3e168ced
Autotest: Fence is present, but test looking for not present
...
Autotest: Remove ties to mavlink FENCE_ACTION
Autotest: Add ArduPlane autotest to test ceiling and floor
Adds a test to ensure the vehicle reverts to RTL when breaching a ceiling or floor.
Autotest: Progress the test once we reach takeoff complete and fence enable
Autotest: Use RC_OPTION for Aux Switch functionality
Autotest: Enable fence last
2021-03-05 14:52:46 +11:00
Peter Barker
a235246628
autotest: correct units in new AHRS2 test
2021-03-03 18:41:14 +11:00
Peter Barker
b3ee5d5f59
autotest: increase verbosity in AHRS2 test
2021-03-03 16:29:33 +11:00
Peter Barker
317181922c
autotest: ensure we're getting vaguely sane data in AHRS2 message
2021-03-02 20:48:36 +11:00
Peter Barker
cc83562add
autotest: tidy fence handling
2021-03-02 16:54:06 +11:00
Peter Barker
10007e2e42
autotest: load missions natively rather than using MAVProxy
2021-03-02 14:24:36 +11:00
Peter Barker
9120882e9e
autotest: print name of open dataflash log when test exception caught
...
The stack trace is already extremely useful... but mapping back to the
relevant dataflash log is a bit of a pain.
Adding more stuff to this method in the future might be good, too.
2021-02-21 21:35:35 +11:00
Peter Barker
d4aef2dba8
autotest: stop using MAVProxy to change mode
2021-02-20 00:03:24 +11:00
Peter Barker
c13d229877
autotest: use self.set_current_waypoint rather than "wp set" to set current wp
2021-02-19 12:25:40 +11:00
Peter Barker
dcc04ccd09
autotest: stop using MAVProxy to change modes
2021-02-18 17:38:52 +11:00
Peter Barker
628a3843b2
autotest: flake8 compliance for arduplane.py
2021-02-18 10:43:05 +11:00
Peter Barker
a292fe1b8b
autotest: use wait_statustext rather than mavproxy.expect
...
This is important when running under Valgrind as the text can be
significantly delayed. wait_statustext times out in simulation time,
whereas mavproxy.expect has a flat 60s timeout
2021-02-17 18:16:04 +11:00
Peter Barker
c00a82868e
autotest: make DLVR sole airspeed sensor in test
...
The test wasn't actually *using* the DLVR...
2021-02-17 14:23:07 +11:00
Peter Barker
ca49f62b6d
autotest: add test for Plane's RTL_CLIMB_MIN parameter
2021-02-13 19:34:52 +11:00
Peter Barker
d60fa86026
autotest: use set_map_from_rc more
2021-02-13 19:34:52 +11:00
Andrew Tridgell
3add045924
autotest: fixed accel/gyro threshold consistency for tempcal
2021-01-21 13:09:21 +11:00
Andrew Tridgell
fe7d933976
autotest: use delay_sim_time() in tempcal test
2021-01-21 13:09:21 +11:00
Andrew Tridgell
58b9cd2c6e
autotest: added assert_reach_imu_temperature() abstraction
2021-01-21 13:09:21 +11:00
Andrew Tridgell
4c315b57ca
autotest: run gyro/accel cal at non-reference temperature
2021-01-21 13:09:21 +11:00
Andrew Tridgell
2cf7e7945c
autotest: make tempcal debug output clearer
2021-01-21 13:09:21 +11:00
Andrew Tridgell
84dda13b42
autotest: use new learn param setup
2021-01-21 13:09:21 +11:00
Andrew Tridgell
30385fb8cb
autotest: use set_parameters() in IMU temp cal test
2021-01-21 13:09:21 +11:00
Andrew Tridgell
327db46c15
autotest: added automatic testing of IMU Temperature calibration
2021-01-21 13:09:21 +11:00
Andrew Tridgell
c396d15890
Revert "autotest: ensure defaults files don't set already-default-values"
...
This reverts commit 3d431cd4f1
.
It breaks MissionPlanner SITL. We can re-apply once MissionPlanner
copes with external_model.
2021-01-20 08:54:43 +11:00
Peter Barker
3d431cd4f1
autotest: ensure defaults files don't set already-default-values
...
autotest: mark some vehicles as having external physics models
autotest: add default_params_filename to some vehicle info
2021-01-19 10:34:00 +11:00
Peter Barker
6becd90df0
autotest: increase timeout on DO_CHANGE_SPEED test
2021-01-18 19:08:46 +11:00
Peter Barker
5848ff7512
autotest: eliminate race condition in plane fence static test
2021-01-18 16:32:21 +11:00
Peter Barker
6865649b9b
autotest: tidy and correct ekf lane switching test
2021-01-18 15:19:39 +11:00
Peter Barker
48a38f3ee2
autotest: wait for GPS fix before installing position validation handling
2021-01-18 15:11:19 +11:00
Peter Barker
cd8a393ac2
autotest: create own RC thread to handle setting of RC overrides
...
autotest: prevent method-on-undef problem in case of early test failure
autotest: plumb MAVProxy rc input back in for switch test
autotest: close off rc thread in case of timeout
2021-01-15 20:56:30 +11:00
Peter Barker
47aea5f44c
autotest: print stack traces for caught exceptions
2021-01-13 19:46:13 +11:00
Andrew Tridgell
b5476c6e5c
autotest: added ExternalAHRS test
2021-01-05 21:13:12 +11:00
Peter Barker
2b06ae9aa0
autotest: create and use a wait_sensor_state method
2020-12-31 17:42:33 +11:00
Peter Barker
26bbedd777
autotest: remove un-needed parameter wipe after soaring test
2020-12-25 12:18:01 +11:00
Peter Barker
69ef0937f4
autotest: add trivial test just to cover the Airspeed_DLVR code
2020-12-22 23:07:24 +11:00
Pierre Kancir
871b9fc12d
Tools: plane : initial_mode_switch_mode
2020-12-16 17:27:07 +09:00
Andrew Tridgell
5fc68a1ce5
autotest: adjust for new baro SITL param names
2020-12-11 15:21:41 +11:00
Peter Barker
813723d0b7
autotest: add test for needing AHRS to be healthy to arm
2020-12-11 09:55:40 +11:00
Tom Pittenger
58c7f8279d
Tools/autotest: fix CI by updating new ADSB_ENABLE->ADSB_TYPE param name
2020-11-30 16:05:17 +11:00
Peter Barker
18330d16de
autotest: add test for MAVlite
2020-10-27 10:17:53 +11:00
Peter Barker
49fd762f26
autotest: fix and re-enable button test
...
A recent commit to fix the setting-of-pullup-resistors in SITL makes it
possible to re-enable this.
Closes #15259
2020-10-15 08:34:08 +11:00
Samuel Tabor
bd28a62155
autotest: Update soaring test for THERMAL mode.
2020-09-25 16:21:15 +10:00
Samuel Tabor
fe6c4d9290
autotest: Update for THERMAL mode.
2020-09-24 07:30:48 +10:00
Harshit Kumar Sankhla
f0c237d88e
autotest: bug fixes for ekf lane switch test
2020-09-11 10:16:20 +10:00
Samuel Tabor
6de4967a3d
autotest: Fix typos and unclear comments in soaring test.
2020-09-10 22:21:41 +10:00
Samuel Tabor
f6017d60bf
autotest: Update for new soaring behaviour.
2020-09-10 22:21:41 +10:00
Peter Barker
51b54d3740
autotest: avoid leaving message hooks around
...
Can lead to some very weird and confusing output
2020-09-09 17:59:17 +10:00
Peter Barker
9228f47dc9
autotest: create collections-on-context to record selected messages
2020-09-08 14:19:08 +10:00
Peter Barker
f3866e5f39
autotest: disable button test
2020-09-08 12:31:15 +10:00
Peter Barker
522c3e6281
autotest: make LogUpload the last test again
...
ATM any logs produced by EKFLaneswitch won't get uploaded in case of
failure
2020-09-01 18:15:37 +10:00
Harshit Kumar Sankhla
464c90a03c
Tools: add an EKF3 lane switching test to plane
2020-08-27 20:20:51 +10:00
Peter Barker
67b71e2b94
autotest: add test for Plane dead-reckoning support
2020-08-21 18:16:40 +10:00
Samuel Tabor
d57b7cad63
autotest: Update soaring test to use RCX_OPTION.
2020-07-21 09:38:04 +10:00
Samuel Tabor
ed14ab84ce
autotest: Add test for terrain following mission.
2020-07-07 11:46:32 +10:00
Samuel Tabor
c3f039a739
autotest: Add timeout to fly_mission.
2020-07-07 11:46:32 +10:00
Peter Barker
4e216f976f
autotest: assert that Plane doesn't support fence-via-mission-item-protocol
...
Hopefully this starts to fail at some stage!
2020-06-02 19:00:32 +10:00
Peter Barker
b0916231b2
autotest: add tests for log download
2020-05-26 19:32:49 +10:00
Samuel Tabor
913e5a23fe
autotest: Add method to get default params for model.
2020-04-22 10:01:09 +10:00
Peter Barker
e63e5ba130
autotest: correct path to defaults file when customising SITL cmdline
2020-04-19 11:09:16 +10:00
Samuel Tabor
e30f0a9173
autotest: Move soaring test into plane.
2020-04-19 11:09:16 +10:00
Peter Barker
899b98b2f9
Plane: add test for loading/restoring large missions
2020-04-15 16:24:40 +10:00
Peter Barker
10e8f3f3d7
autotest: canonicalise on defaults_filepath rather than defaults_file
...
This naming better represents the fact this isn't just a filename.
2020-04-14 15:09:17 +10:00
Pierre Kancir
07435cc541
Tools: correct path for soaring mission
2020-04-09 09:01:03 +10:00
Pierre Kancir
bcd15bc6e4
Tools: update path for plane test missions files
2020-04-09 09:01:03 +10:00
Samuel Tabor
a4c5e12fac
Tools: Make soaring test a subclass of plane test.
2020-04-08 09:11:54 +10:00
Pierre Kancir
56298aabda
Tools: update arduplane.py wait function parameters
2020-03-27 22:13:52 +11:00
Peter Barker
403950f61f
autotest: add autotests for CPU failsafe
2020-03-20 12:19:21 +11:00
Peter Barker
92d2186b95
autotest: don't use self.mav.motors_disarmed_wait as it blocks forever
2020-03-17 16:31:29 +11:00
Peter Barker
b0aceaea70
autotest: add tests for LTM telemetry output
2020-02-08 10:38:34 +11:00
Peter Barker
71a129d685
autotest: add test for Plane LOITER
2020-02-07 15:02:35 +11:00
Peter Barker
9192cb7b41
autotest: add tests for parameter download
2020-01-15 13:54:23 +11:00
Peter Barker
ba13f0bb29
autotest: add test for Frsky SPort
2020-01-13 16:03:12 +11:00