0b6e664eac
temporary - forcing WP yaw tracking in Auto.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1876 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-12 02:32:24 +00:00
dd16a000cb
preparing for hexa-x and hexa-+ frames, code updates
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1875 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-12 01:58:46 +00:00
478af67099
preparing for hexa-x and hexa-+ frames
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1874 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-12 01:52:16 +00:00
c8c8d2cde2
fixes a yaw Rate issue.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1873 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-11 05:15:22 +00:00
06d0b9859c
commented out debugger code
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1872 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-10 23:20:22 +00:00
608a089d68
added a limit to throttle_input = 800 for stability insurance
...
found an odd bug in SIMPLE mode that broke LOITER mode. Fixed
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1871 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-10 23:07:24 +00:00
828f0b0443
removed the throttle min max settings for user config.
...
turned off altitude interpolation for now.
removed the "Dampener" setting in config. Using less confusing kD instead.
removed throttle_cruise reset in events.pde for RTL - would cause a crash.
added I term for pitch/roll for when flying greater than 20°
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1868 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-10 20:31:33 +00:00
b1fcea4308
added minimum of 1 meter to alt hold
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1859 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-09 17:48:03 +00:00
50bd55107d
revved Params firmware version
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1858 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-08 19:15:49 +00:00
395e642f3b
fixed typo
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1857 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-08 19:15:27 +00:00
5d63a05de7
added better value for Sonar minimal value for landing
...
removed FBW mode - no longer needed
added set_throttle_cruise_flag to auto set the throttle value for alt hold
added altitude minimum option for waypoints
added support for relative WPs
added support for Yaw tracking per WP in options bitmask
lowered default sonar kD value
increased minimal value to set the throttle cruise value with CH7 switch
updated README.txt
added additional stock test missions available in CLI
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1856 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-08 19:13:31 +00:00
8c44ee2ac6
missing }
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1844 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-04 00:15:45 +00:00
4660bb87e2
updated test mission. It now passes the tests. Be sure to verify things are working well before flying.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1843 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-03 21:11:14 +00:00
e8c40234a6
removed the on-the-ground limitation for setting simple mode bearing.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1841 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-03 05:16:45 +00:00
5d4b8d9913
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1840 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-03 04:44:00 +00:00
5ef54d2de4
found the issue with stability - something to do with APVar.
...
commenting out setup_show(NULL,NULL); in startup_ground() causes some values to misload???
Or maybe it's a delay thing.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1839 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-03 00:47:20 +00:00
6b405c5831
minor change to GPS
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1834 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-02 19:56:35 +00:00
f2a9d38393
Y6 frame, motors changed to All TOP CCW / BOTTOM CW
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1833 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-01 14:45:35 +00:00
72fc8a1f51
Added interactive control for altitude in Loiter (position hold) and Altitude hold (mostly just used for testing).
...
Throttle down = descend, throttle high = ascend.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1831 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-30 05:27:13 +00:00
294d6752fe
Hopefully this fixes the GPS init bug.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1830 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-30 04:24:20 +00:00
63f8491ad3
RC_3 - the throttle channel dead zone upped to 60 to avoid noise issues
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1825 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-28 16:11:08 +00:00
f8a718e645
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1824 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-28 05:18:10 +00:00
2a4cb2095f
GPS is disabled in this version to debug some bad behavior. If it doesn't stabilize well. Let me know.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1823 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-28 04:12:19 +00:00
eee391e6d9
implementing yaw tracking.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1821 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-27 21:26:34 +00:00
eead295208
Better implementation of the GPS sensing.
...
You must now be on the ground and before you cant set the initial angle for Simple mode.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1819 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-27 06:24:53 +00:00
8ca3ab6f62
Revved the firmware version.
...
Updated the motor spin up issue - this is the I've not set my radio up properly issue.
updated 200ms motor spin up issue with the Libraries - for those who have ESC's that don't do sanity checks.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1816 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-26 21:03:20 +00:00
46e8c2e67a
GPS Light fix
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1815 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-26 06:53:27 +00:00
f8b0c61e63
updates - support
...
new test mission - Liftoff, spin, land
updated scripted Yaw control
Public Beta candidate...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1814 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-26 06:35:52 +00:00
250c800187
Yaw fix for Max Y6
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1810 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-24 01:36:52 +00:00
28e363b634
undid accidentical commit of local changes
...
sorry about that!
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1806 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:35:54 +00:00
2754a32000
fixed printf() format error
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1805 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:30:59 +00:00
857ca3f5be
separate out automatic reset of modes and radio
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1804 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:30:51 +00:00
2937acc2a2
added ALWAYS_RESET_SETTINGS
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1803 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:30:45 +00:00
c8fd23ac45
allow configuration of motor arming condition
...
This allows the user to configure their own motor arming condition in
APM_Config.h. For example, the user could set it up for MODE1
transmitters, by using:
#define MOTOR_ARM_CONDITION (g.rc_3.control_in == 0 && g.rc_1.control_in > 2700)
#define MOTOR_DISARM_CONDITION (g.rc_3.control_in == 0 && g.rc_1.control_in < -2700)
You could also set it up to use the "throttle cut" switch on a
transmitter, by mapping that to a spare channel.
The default (throttle minimum and maximum/minimum yaw) is the same as
it was before
This patch also adds reporting of motor arming to the GCS, which can
be useful for testing.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1802 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:30:38 +00:00
828f97f474
tridge: report mode switch changes
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1801 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:30:32 +00:00
216379e286
tridge: my config
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1800 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:30:24 +00:00
ae9ae7f946
adapt send_text() for typesafe PSTR()
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1799 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:26:59 +00:00
bb285a248b
implement mavlink messages
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1793 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-20 12:55:51 +00:00
783656b574
Added Y6 support
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1792 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-19 19:21:43 +00:00
2850ac6c74
mavlink: support MAV_FRAME_GLOBAL_RELATIVE_ALT
...
this allows for relative altitude, but global lat/lon
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1791 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-19 10:23:08 +00:00
d70703aa62
disabled tabs in emacs formatting markers
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1790 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-19 10:20:11 +00:00
f9469507c0
make it possible to enable RC override on non-HIL setups
...
this makes it possible to allow a GCS to override RC input values for
non-HIL setups. This gives a way for a GCS to set an arbitrary switch
value, or set a precise PWM value for any control.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1789 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-19 10:18:21 +00:00
f0458631a3
added send_text_P()
...
this merges the send_text_P() updates from APM
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1788 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-19 10:14:15 +00:00
8ca4986375
mavlink: merged in changes from APM
...
this fixes waypoint upload
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1787 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-19 08:05:06 +00:00
2427931550
added update_events() prototype
...
this fixes a build error on Linux. See the equivalent commit in APM
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1786 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-18 01:50:46 +00:00
51df8d1d9d
HIL: fixed a build error with HIL
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1785 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-18 01:50:39 +00:00
613d414908
mavlink: reduce the number of message buffers to 2
...
this is all we need, and it saves us some SRAM
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1784 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-18 01:50:33 +00:00
c931bde863
added sonar test
...
useful to check calibration of the sonar
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1783 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-18 01:50:27 +00:00
acb0525bf6
removed startup_IMU_ground
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1780 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-17 17:47:04 +00:00
94d34ad117
Fix for reversed pitch in SIMPLE mode.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1779 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-17 05:05:16 +00:00
b66db9f839
fix for Loop timing issue.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1776 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-16 05:43:48 +00:00
c1f785df66
removed debug code
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1775 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-15 05:55:51 +00:00
41c9b1edd7
Update to get SIMPLE mode running.
...
Seems to work!
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1774 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-15 05:54:48 +00:00
bd8c72958d
Added new Simple mode - Better version of FBW that is offset by initial yaw angle and not north.
...
Added new navigation control based on bearing_error so we can leverage Crosstrack correction.
I've done limited testing on this.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1773 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-14 06:04:07 +00:00
e5fe9231f3
alignment with APM 2.0
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1772 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-13 06:25:38 +00:00
1c9635b058
cleaned up unneeded integer in xbee test
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1771 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-11 23:03:56 +00:00
b652f2d571
Update rawgps cli test with indicator LED.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1770 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-11 23:00:40 +00:00
90aa2d6d83
fix for Logging, motors_out buffer overrun, formatting.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1769 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-11 21:37:37 +00:00
f52f27ef67
enable logs default
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1768 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-11 02:49:12 +00:00
844cc5da44
Fixed new Xbee Test bug
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1767 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-10 21:27:22 +00:00
65037481a2
New Xbee Test Implemented
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1766 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-10 19:25:54 +00:00
d279cc49d2
Remove a stale reference to APM_BinComm.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1765 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-10 06:25:02 +00:00
f255e4ed1e
ACM fix old mavlink reference. (use new GCS_mavlink library)
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1764 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-10 01:06:27 +00:00
ecca178dfe
Applied changes for rawgps cli test mode.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1763 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-09 14:48:49 +00:00
8435b3bd25
lots of minor changes, Logs should be working better now.
...
Pos hold is now called "Loiter" - I don't want to have a flight mode called HOLD POS...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1761 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-09 07:00:48 +00:00
49b3f8bbb2
lots of minor changes, Logs should be working better now.
...
Pos hold is now called "Loiter" - I don't want to have a flight mode called HOLD POS...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1759 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-09 06:37:09 +00:00
ded4f8d83f
added C coding style headers to a few more files
...
this helps for people running editors like emacs that can read these
and set the right tab levels
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1758 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-08 12:20:48 +00:00
9e26bc814a
fixed PID setting bug.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1755 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-07 21:22:55 +00:00
dd51d0730a
moved Mag offsets to "test","stabilize"
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1754 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-07 19:06:29 +00:00
1cc6ba3da9
Added break feature on yaw control. Please verify it works properly before flying.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1753 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-07 17:19:38 +00:00
9b79904a5e
Added break feature on yaw control. Please verify it works properly before flying.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1752 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-07 16:59:58 +00:00
6b99e76fcb
bug fixes and updates
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1751 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-07 06:00:27 +00:00
b0e6f40562
bug fixes and updates
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1750 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-07 00:57:06 +00:00
2958ac7787
HIL: we need very fast update of motor controls for HIL
...
When doing HIL with a copter you need to update the controls very
rapidly, much more so than with a plane. This puts the update in the
fast loop
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1749 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-06 09:36:03 +00:00
c07dccd77c
mavlink: fixed store of parameter values to eeprom
...
setting parameters via mavlink only saves them in memory. We need to
use AP_Var::save_all() to save them permanently
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1748 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-06 09:35:57 +00:00
a82434b00a
HIL: fill motor_out[] when disarmed, so HIL sees zero values
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1747 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-06 09:35:50 +00:00
7daf00a618
upped WP to 15 bytes
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1746 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-05 20:50:49 +00:00
ed46609c9a
Just aligning tabs
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1744 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-05 05:15:12 +00:00
0b2d94950f
Added support for WP options
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1743 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-05 05:12:16 +00:00
afa8be2008
Added support for WP options
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1742 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-05 04:56:58 +00:00
3b19ab773d
mavlink: fixed parameter string handling
...
this prevents running past the end of a non-terminated string.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1740 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-03 11:40:19 +00:00
26066291cb
fixed the flight mode channel parameter to match current APM trunk
...
APM trunk now calls this parameter FLT_MODE_CH. This makes the ACM
code compatible.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1739 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-03 11:40:13 +00:00
b7e70bb1e6
added radio override via MAVLink
...
This allows MAVLink commands to override the RC input values. See the
discussion on the mavlink list.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1738 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-03 11:40:06 +00:00
7691133230
mavlink: fixed build with MAVLink and HIL
...
this fixes the build with HIL_MODE_ATTITUDE and MAVLink enabled. Basic
MAVLink operation works.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1737 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-03 11:39:52 +00:00
988149a1c9
Big changes in the way commands are parsed and mission tasks are done. Not tested at all.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1736 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-03 02:32:50 +00:00
957e1a747b
Should be flyable now. Please Use Reset in setup before flying.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1726 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-25 05:33:39 +00:00
5d81f37b37
removing unused file
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1725 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-25 02:51:58 +00:00
7e8dc1a69e
removing old EEPROM.pde file
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1724 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-25 02:51:31 +00:00
925215d70b
removing old EEPROM.pde file
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1723 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-25 02:50:51 +00:00
95dcf341e2
removing old EEPROM.pde file
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1722 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-25 02:50:38 +00:00
2b69769843
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1719 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-24 05:56:59 +00:00
b5aa056cc4
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1715 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-23 05:12:41 +00:00
3121f943c0
in progress updates, don't fly
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1710 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-21 20:58:10 +00:00
fd771175b4
added mavlink
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1708 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-21 06:36:05 +00:00
6fa1a9576e
fixed printf_P bug
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1705 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-21 04:46:26 +00:00
9c446dbd35
continued APvar int
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1703 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-21 04:30:56 +00:00
b28fb0a63a
continued APvar int
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1701 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-20 23:09:28 +00:00
5085656e0d
AP_Var integration continued....
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1699 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-20 19:07:35 +00:00
e8a458f6d1
AP_Var integration continued
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1697 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-20 02:03:01 +00:00
f16a7a6ab3
AP_Var integration continued
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1693 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-19 22:44:52 +00:00
jasonshort
jphelirc
levinemax@gmail.com
tridge60@gmail.com
mich146@hotmail.com
dhcorley@msn.com
DrZiplok