Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
35,776 Commits 71 Branches 509 Tags 763 MiB
Commit Graph

905 Commits

Author SHA1 Message Date
Igor Anokhin e6d4b2a087 AP_InertialSensor: add LSM9DS1 entry 
Enable LSM9DS1 in case it is selected
 2018-02-06 09:31:26 -08:00
Igor Anokhin be386b2b73 AP_InertialSensor: LSM9DS1 add FIFO support 
Make reading data with FIFO
 2018-02-06 09:31:26 -08:00
Igor Anokhin 44d5112488 AP_InertialSensor: add LSM9DS1 support 
Make LSM9DS1 driver
 2018-02-06 09:31:26 -08:00
LukeMike 502f19cbae VRBRAIN / AP_InertialSensor: added inertial sensors init for VR Brain boards 2018-02-05 08:26:49 +11:00
Randy Mackay 9ea16bec15 AP_InertialSensor: resolve compiler warning in example 2018-01-23 08:32:48 +09:00
Andrew Tridgell 100363ba03 AP_InertialSensor: if no sensors found allow parameter change 2018-01-20 10:36:22 +11:00
Andrew Tridgell 24c424ae5d AP_InertialSensor: support over 1kHz IMUs 
this allows for invensense IMUs to run above 1kHz by adjusting the
downsampling rate
 2018-01-20 10:36:22 +11:00
Andrew Tridgell c0c5f23aa5 AP_InertialSensor: added INS_ENABLE_MASK 
this allows for only a specified subset of IMUs to be probed, so you
can disable IMUs that aren't needed.

The back corresponds to bits in the order the IMUs are normally probed
on the board
 2018-01-20 10:36:22 +11:00
Andrew Tridgell 9416165fe3 AP_InertialSensor: improved invensense debugging on ChibiOS 2018-01-20 10:36:22 +11:00
Andrew Tridgell 8ab35e8aca AP_InertialSensor: fixed MindPX-v2 orientation of IMU2 2018-01-15 11:46:02 +11:00
Andrew Tridgell dcab40459d AP_InertialSensor: support MindPX-v2 2018-01-15 11:46:02 +11:00
Andrew Tridgell febe414766 AP_InertialSensor: disable fast sampling on 2nd IMU on Pixracer 
it also hosts a mag, and gets lots of FIFO resets if we try to run it
at 8kHz
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 3fc095589c AP_InertialSensor: support ChibiOS FMUv4 2018-01-15 11:46:02 +11:00
bugobliterator 1c6beaa7c4 AP_InertialSensor: use new API for DMA safe allocation 2018-01-15 11:46:02 +11:00
Andrew Tridgell 39362a81ae AP_InertialSensor: support ChibiOS 2018-01-15 11:46:02 +11:00
Tom Pittenger 36f06d3576 AP_InertialSensor: remove AP_InertialSensor_UserInteract 
leftover dead code from when CLI was removed
 2018-01-11 08:11:07 +11:00
Pierre Kancir 8c8767e964 AP_InertialSensor: reduce QURT include scope 2017-12-27 15:13:30 +00:00
Andrew Tridgell 99499dece2 AP_InertialSensor: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 39c206ca03 AP_InertialSensor: limit delta-time from INS 
limit delta-time to 2x average time

DEBUG CODE - DO NOT MERGE
 2017-12-12 11:39:38 +11:00
Andrew Tridgell a0af4af5b5 AP_InertialSensor: debugging code for EK2 bug 2017-12-12 11:39:38 +11:00
Randy Mackay 38145f9541 AP_InertialSensor: fix param docs for notch and log settings 2017-12-12 07:59:41 +09:00
Peter Barker 161e2145cb AP_InertialSensor: tighten type of simple_accel_cal result 2017-12-01 17:01:10 +00:00
HeBin c056076e85 AP_InertialSensor: fix code style problem, delete useless codes 2017-11-22 10:20:00 -08:00
HeBin efbb030494 AP_InertialSensor: add Robsense PhenixPro Devkit Board support 2017-11-22 10:10:21 -08:00
Andrew Tridgell eab1d3af4f AP_InertialSensor: don't apply offsets in SITL backend 
the offsets are applied in the rotate and correct methods
 2017-11-01 17:09:21 +11:00
Peter Barker b997f445ff AP_InertialSensor: include sample count in ISBH 2017-10-27 16:33:45 +11:00
Peter Barker 9566abb3a8 AP_InertialSensor: add IMU batch sampling 2017-10-27 16:33:45 +11:00
Peter Barker 5096e2fca9 AP_InertialSensor: use df singleton, factor out log_{gyro,accel}_raw 2017-10-27 16:33:45 +11:00
Alexey Bulatov 069c98b8a9 AP_InertialSensor: Edge: add sensor's rotation YAW_90 2017-10-20 13:03:08 -07:00
Georgii Staroselskii ac6f7511bd AP_InertialSensor: examples: print temperature 2017-10-20 13:03:08 -07:00
Georgii Staroselskii 4f2d8f8df4 AP_InertialSensor: use ICM backend for Edge 2017-10-20 13:03:08 -07:00
Andrew Tridgell 6a6f9681ab AP_InertialSensor: allow for 1,1,1 accel scaling 
this supports simple accel calibration
 2017-10-10 10:57:38 +11:00
Andrew Tridgell f513c1c8dd AP_InertialSensor: support rotated IMUs in SITL 2017-10-10 10:57:38 +11:00
Andrew Tridgell d5cab1140a AP_InertialSensor: added simple_accel_cal() 
this is useful for mass market vehicles where a full 3D accel cal is
too complex.
 2017-10-10 10:57:38 +11:00
Lucas De Marchi b05610870c global: use static method to construct AP_Rally 2017-09-26 03:01:21 +01:00
Lucas De Marchi 69b6d95cb2 global: use static method to construct AP_Board_Config{,_CAN} 2017-09-26 03:01:21 +01:00
Lucas De Marchi 87b30b4552 global: use static method to construct AP_InertialSensor 2017-09-26 03:01:21 +01:00
Lucas De Marchi d566567d87 AP_InertialSensor: add static create method 2017-09-26 03:01:21 +01:00
Lucas De Marchi caa4e3ee89 AP_InertialSensor: remove raspilot 2017-09-12 15:06:19 -07:00
Lucas De Marchi 06fe5ce8ba AP_InertialSensor: implement periodic thread for AuxiliaryBus 2017-09-11 09:52:41 -07:00
Andrew Tridgell 7e1368f7a5 AP_InertialSensor: implement notch filter on gyro 2017-08-29 13:52:29 +10:00
Kevin Lopez Alvarez ca3627c140 AP_InertialSensor: add ppro support 2017-07-24 13:47:06 +10:00
Randy Mackay 51fa8fb0bd AP_InertialSensor: resolve member init order compiler warning 2017-07-07 17:27:23 +09:00
Randy Mackay edc9d4db5b AP_InertialSensor: increase accel filter to 20hz 2017-07-03 09:38:15 +09:00
Peter Barker 6ae86a0b8c AP_InertialSensor: use DataFlash should_log to determine raw logging 2017-06-29 15:26:27 +01:00
Leonard Hall 447b20efa5 AP_InertialSensor: reduce accel filter to 10hz 2017-06-01 14:53:48 +09:00
Andrew Tridgell 62b826953d AP_InertialSensor: use AP_Math rand_float() 2017-05-03 20:12:04 +10:00
Andrew Tridgell bfd8d151c8 AP_InertialSensor: lower slave rate with fast sampling 
On an invensense IMU with fast sampling we need to lower the slave
sample rate for slave sensors such as the built-in AK8963 compass on a
MPU9250.

The slave rate is set as a multiple of the main rate, so it needs to be
much lower for fast sampling. If we leave it high then it greatly
impacts on IMU sample rate.

Without this change a MPU9250 with fast sampling and a compass enabled
will give a gyro rate of around 7200Hz. With this change it gets 7760Hz
 2017-05-02 12:11:08 +10:00
Andrew Tridgell 519a293af9 AP_InertialSensor: fixed instance usage in set_gyro_oversampling() 
thanks Francisco!
 2017-05-02 08:27:11 +10:00
Andrew Tridgell 112b22516a AP_InertialSensor: fixed use of accel2_noise 
thanks Francisco!
 2017-05-02 08:24:50 +10:00
Andrew Tridgell 2876f1467c AP_InertialSensor: converge sensor rate quickly, then slowly 
converge fast for the first 60 seconds, then more slowly to reduce
noise
 2017-05-01 15:13:56 +10:00
Andrew Tridgell db25b6e966 AP_InertialSensor: estimate and log sensor rates for all IMUs 
this adds IMU.GHz and IMU.AHz log fields so we can see the actual
observed sensor rates of each IMU
 2017-05-01 15:06:46 +10:00
Andrew Tridgell 49cc0965c0 AP_InertialSensor: separate handling of FIFO and non-FIFO sensors 
FIFO sensors produce data at a well known rate, but samples come in
bunches, so we can't use the system clock to calculate deltaT.

non-FIFO sensors produce data when we sample them, but that rate is
less regular due to timing jitter.

For FIFO sensors this changes makes us use a learned sample rate,
which allows for different clock speeds on sensor and system board.

For non-FIFO sensors we use the system clock to measure deltaT

the overall effect is a fix for sensors that produce samples at other
than the claimed datasheet rate.
 2017-05-01 15:06:46 +10:00
Andrew Tridgell 74eb7a7243 AP_InertialSensor: make SITL sensor rate match a Pixhawk1 
use 760Hz 2nd gyro and 800 Hz 2nd accel
 2017-05-01 15:06:46 +10:00
Andrew Tridgell 25cd16a275 AP_InertialSensor: fixed LSM303D registered sample rate 
we are running the LSM303D at 1600Hz, and are sampling it at 1kHz. We
need to tell the AP_InertialSensor layer that samples will arrive at 1kHz
 2017-05-01 15:06:46 +10:00
Andrew Tridgell e62fdad12c AP_InertialSensor: added get_last_update_usec() 
this will be used by the inter-EKF scheduling changes
 2017-05-01 14:24:55 +10:00
Andrew Tridgell c952e58edb AP_InertialSensor: fixed invensense driver temp reading 
different parts have quite different zero offsets in temperature
 2017-04-03 10:06:27 +10:00
Lucas De Marchi 2e4e4365d0 AP_InertialSensor: enable fast sampling for aerofc 2017-03-24 12:06:19 +11:00
Lucas De Marchi 87846fe049 AP_InertialSensor: use MPU6500 on aerofc 2017-03-24 12:06:19 +11:00
Andrew Tridgell 875274e761 AP_InertialSensor: added support for ICM-20602 
treat the same as a 20608
 2017-03-02 14:21:36 +11:00
Andrew Tridgell b86513f503 AP_InertialSensor: support AUAV21 board 2017-03-01 17:24:10 +11:00
Lucas De Marchi 2d50eb312c AP_InertialSensor: add support to MPU6500 
Just like and MPU9250 without mag and with different WHOAMI register.
 2017-02-26 13:37:13 +11:00
murata a3f5b4f319 AP_InertialSensor: Change from magic number 0 to definition name. 2017-02-18 14:12:36 +00:00
Lucas De Marchi 9535b45cc9 AP_InertialSensor: examples: fix double to float warnings 
While at it add function prototype.
 2017-02-12 01:22:35 +00:00
Andrew Tridgell 01da36295d AP_InertialSensor: support the L3GD20H gyro 
this is used by the MRo Pixhawk1
 2017-01-31 07:39:36 +11:00
murata 0733d760f6 AP_HAL_VRBRAIN: Unify from print or println to printf. 
AP_InertialSensor: Unify from print or printin to printf.
 2017-01-27 18:20:22 +11:00
murata 2643e7e906 AP_InertialSensor: Unify from print or println to printf. 2017-01-27 18:20:22 +11:00
Julien Beraud 3d9dacb227 AP_InertialSensor: push gyro data for opticalflow 
Do it only if there is an optical flow in the current HAL
 2017-01-23 21:23:16 +11:00
Lucas De Marchi 5472bc4de1 Global: change Device::PeriodicCb signature 
Remove bool return as it's never being used and not supported on PX4.
 2017-01-14 10:03:54 +11:00
mirkix 62fabca19d AP_InertialSensor: Enable I2C bypass for MPU9250 conntected via I2C to access internal AK8963 2017-01-11 21:44:24 -08:00
Randy Mackay 946d30476a AP_InertialSensor: fix whoami for MPU6k 2017-01-05 10:29:51 +09:00
murata d56bad781f AP_InertialSensor: change if statements to switch statement 
No functional change
 2016-12-24 12:23:59 +09:00
murata 398b7b83dd AP_InertialSensor: minor formatting fixes 
No functional change
 2016-12-24 12:23:58 +09:00
Lucas De Marchi 9569ed94a9 AP_InertialSensor: Invensense: use capital letters for define 2016-12-20 09:23:30 +09:00
Andrew Tridgell a30745903a AP_InertialSensor: use ACC2_BIAS 2016-12-19 08:07:15 +11:00
priseborough 60ebe97e10 AP_InertialSensor: remove unused EKF1 include 2016-12-19 08:07:11 +11:00
Andrew Tridgell 65b9b86099 AP_InertialSensor: unify MPU6000 and MPU9250 drivers 
make a single AP_InertialSensor_Invensense driver. This avoids a lot
of duplication and will save time as new varients are added
 2016-12-16 12:31:34 +11:00
Pierre Kancir de05e6ba29 InertialSensor : MPU9250 utilize an explicit type cast to avoid the loss of a fractional part 2016-12-05 12:39:30 -08:00
Pierre Kancir 13c16e187f InertialSensor: MPU6000 utilize an explicit type cast to avoid the loss of a fractional part 2016-12-05 10:59:45 -08:00
Randy Mackay dfd58cc57b AP_InertialSensor: fix build warning for MPU9250 2016-11-30 18:00:14 +09:00
Randy Mackay 699279ed1f AP_InertialSensor: fix build warning for MPU6000 2016-11-30 18:00:13 +09:00
Andrew Tridgell f9845c93b1 AP_InertialSensor: keep transfers nicely setup for DMA on stm32 
this avoids using stack based bounce buffers which may not support DMA
on stm32
 2016-11-27 11:26:10 +11:00
Andrew Tridgell 771cedca3d AP_InertialSensor: reduced number of SPI transfers 
use cached copy of temperature in MPU6000 and MPU9250 to detect FIFO
error when possible
 2016-11-26 19:02:22 +11:00
Andrew Tridgell 27605b0258 AP_InertialSensor: run invensese reg checking at low speed 
config register read/write should be at low bus speed.

also change to check every 20 calls to reduce checking cost
 2016-11-25 20:31:40 +11:00
Andrew Tridgell 0f984290c3 AP_InertialSensor: enable fast sampling by default on some boards 2016-11-25 17:59:54 +11:00
Andrew Tridgell f3a778f980 AP_InertialSensor: fixed freeing of fifo buffer 2016-11-25 17:50:19 +11:00
Andrew Tridgell 6f28c61c8d AP_InertialSensor: changed SIZE to LEN 
thanks to Lucas for suggestion
 2016-11-25 17:50:19 +11:00
hiro2233 cb7f46d653 AP_InertialSensor: fixed handling of user_ctrl register 
with aux bus implementations
 2016-11-25 17:50:18 +11:00
Andrew Tridgell 9b4c588c09 AP_InertialSensor: adapt drivers for SPI-DMA capable systems 
no longer need accumulate() transfers with SPI enabled DMA on stm32
 2016-11-25 17:49:58 +11:00
Andrew Tridgell 28daddaaf2 AP_InertialSensor: don't use accumulate approach on Linux or I2C 2016-11-25 17:49:57 +11:00
Andrew Tridgell d9c8db7024 AP_InertialSensor: implement a new strategy for fast sampling 
this moves to using a 1p filter on the high rate data, followed by
averaging down to 1kHz then a 2p filter to apply configured cutoff
frequency.

It also fixes the FIFO reset to not cause data corruption. We need to
disable all FIFO channels before doing the reset, and wait for the
FIFO to stop in the sensor.

Finally it moves sampling of the MPU6000 and MPU9250 into the main
thread. That significantly improves scheduling performance as we no
longer get long FIFO SPI transfers happening during other tasks. All
transfers happen at the start of the fast loop. That makes timing much
more predictable.

Thanks to Leonard and Paul for help with this design!
 2016-11-25 17:49:57 +11:00
Lucas De Marchi 87c6d5da13 AP_InertialSensor: replace panic() with return 
When blocking forever there's no reason to call panic later since it
will never going to be reached. This reduces binary size in a few bytes
since the message isn't required anymore.
 2016-11-21 18:04:10 -02:00
Andrew Tridgell 6129b1abb6 AP_InertialSensor: wait forever for semaphore on startup 
some boards take a silly amount of time to get semaphore on startup
 2016-11-21 17:57:21 -02:00
Andrew Tridgell 216cf53922 AP_InertialSensor: handle FIFO overflow for MPU6k and 9250 
this prevents temporary corruption of INS data on FIFO overflow
 2016-11-19 12:54:22 +11:00
Andrew Tridgell 18d4286166 AP_InertialSensor: fixed pixfalcon 9250 detection 2016-11-18 14:24:39 +11:00
Andrew Tridgell cb1a5d4c74 AP_InertialSensor: take semaphore for update of accumulators 
this fixes a race in update of delta angle and delta velocity between
backend and frontend
 2016-11-18 06:32:17 +11:00
Andrew Tridgell f3f1f6b0b6 AP_InertialSensor: fixed gyro orientation on l3gd20H on pixhawk 2016-11-16 20:33:56 +11:00
Andrew Tridgell 6af00027ab AP_InertialSensor: removed unused variables 
thanks to Francisco for noticing
 2016-11-16 08:41:06 +11:00
Francisco Ferreira bfbb275577 AP_InertialSensor: on accel cal failure don't save values to zero 
When the accel calibration fails leave the previous values saved but set them to defaults (scale default is ones, not zeros) and notify the GCS
This fixes an arithmetic exception when doing a second accel cal after the first one failed
 2016-11-15 11:42:54 -08:00
Andrew Tridgell 624178f3be AP_InertialSensor: added INS_FAST_SAMPLE parameter 
this allows enable/disable of fast sampling per IMU, making
experimentation easier.

It also fixes the fast sampling to always average over 8 samples, and
fixes the 9250 to use the correct accumulator when not doing fast
sampling
 2016-11-15 21:16:40 +11:00