Commit Graph

5120 Commits

Author SHA1 Message Date
bugobliterator 6203e0685e autotest: disable MAG orientation test 2020-09-06 11:21:28 +10:00
Andy Piper 0b9d9fc284 autotest: use StringIO correctly 2020-09-06 09:12:59 +10:00
Pierre Kancir 31338f955b Tools: allow to skip completion installation 2020-09-05 13:31:03 +10:00
Andy Piper 6ebc7622fe autotest: comprehensive dataflash test 2020-09-05 10:20:39 +10:00
Pierre Kancir 11417ac3a7 Tools: build-ci: use python -m pip for easier pip version management 2020-09-04 09:31:23 +10:00
Pierre Kancir 7648413f8c Tools: configure-ci: use python -m pip for easier pip version management 2020-09-04 09:31:23 +10:00
Patrick José Pereira 050334273e Tools: Remove trailing spaces of build_ci
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-09-03 18:14:34 +10:00
Patrick José Pereira 30e2aad6b9 Tools: Add arm-linux-musleabihf toolchain
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-09-03 18:14:34 +10:00
Patrick José Pereira ee4f267743 Tools: Add navigator test in build_ci
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-09-03 18:14:34 +10:00
Peter Barker 2ea41b7997 autotest: spit out actual simulated mag orientations as part of debug 2020-09-03 13:08:07 +10:00
Andrew Tridgell 689902cb69 waf: moved include of ap_config.h into configure step 2020-09-03 09:56:29 +10:00
Andrew Tridgell 24425b4155 waf: allow setup of double precision for some cpp files 2020-09-03 09:56:29 +10:00
Peter Barker 5a8b1639d0 autotest: fix nmea output test 2020-09-02 10:05:26 +10:00
Andrew Tridgell 844d2bf7ff waf: enable MSP when we enable OSD 2020-09-02 05:56:46 +10:00
Andrew Tridgell 6f04b4a5ec waf: added --osd-fonts configure option
allows for --osd without fonts
2020-09-02 05:56:46 +10:00
Andrew Tridgell 7c579c4814 waf: added --osd configure option
to allow boards with no builtin OSD to use MSP OSD
2020-09-02 05:56:46 +10:00
yaapu b658edfa20 Tools: added MSP 2020-09-02 05:56:46 +10:00
Peter Barker 522c3e6281 autotest: make LogUpload the last test again
ATM any logs produced by EKFLaneswitch won't get uploaded in case of
failure
2020-09-01 18:15:37 +10:00
Peter Barker 23ba2002e8 autotest: dump final mag cal report verbosely 2020-09-01 14:11:57 +10:00
Peter Barker 74c47827d9 autotest: drain stdout of SITL binary
The new rate messages were filling up the stdout buffer, causing the
process to block....
2020-08-30 08:38:35 +10:00
Peter Barker e8fa4e1351 autotest: disable autotest for altitude prearm check 2020-08-30 08:38:35 +10:00
Peter Barker 397e134106 autotest: quieten RTL 2020-08-30 08:38:35 +10:00
Peter Barker 065d03dd30 autotest: add a timeout in the button test 2020-08-30 08:38:35 +10:00
Peter Barker c01b26ca62 autotest: fix race condition in EKF type 10
EKF type 10 is always able to give you a position - but the arming
checks require you to have a good GPS position, and that's something
else again.
2020-08-30 08:38:35 +10:00
Peter Barker cafc5b01f4 autotest: fix race condition in Rover RTL test 2020-08-30 08:38:35 +10:00
Peter Barker 43cdceba8f autotest: tweak wait_ready_to_arm 2020-08-30 08:38:35 +10:00
Peter Barker b7641345e1 autotest: set and get parameters directly using mavlink message 2020-08-30 08:38:35 +10:00
Peter Barker ba91cbb270 autotest: correct sub parameter name PSC_VELZ_P, fix test to match 2020-08-30 08:38:35 +10:00
Pierre Kancir 084ec2bb5a Autotest: copter: fix wait_for_alt for descending wait 2020-08-29 14:53:30 +10:00
Pierre Kancir ebd13ac84e Tools: copter: wait_landed_and_disarmed: use wait_for_alt 2020-08-29 14:53:30 +10:00
Pierre Kancir 7fbf11061f Tools: copter: add wait_rtl_complete function 2020-08-29 14:53:30 +10:00
Pierre Kancir 3080899b43 Tools: copter: add wait land and disarm functions 2020-08-29 14:53:30 +10:00
Pierre Kancir 936511a720 Autotest: common: correct some text format 2020-08-29 10:44:19 +10:00
Pierre Kancir 5b72de25e0 Autotest: update wait_distance_to_home
Autotest: copter: allow to pass min_distance for RTL

Autotest: rover: allow to pass min distance for RTL
2020-08-29 10:44:19 +10:00
Peter Barker 119462aeb1 build_binaries.py: Python3 fix
Something in the program output is not ascii
2020-08-28 08:31:46 +10:00
Harshit Kumar Sankhla 464c90a03c Tools: add an EKF3 lane switching test to plane 2020-08-27 20:20:51 +10:00
Pierre Kancir 16b499d0f6 Autotest: allow to select which GPS flags we want to wait for 2020-08-27 09:11:13 +10:00
Peter Barker 80bee19bc9 autotest: correct race condition in button test
A BUTTON_CHANGE may have been emitted after we send the parameter but before it is processed by the autopilot
2020-08-26 13:22:14 +10:00
Peter Barker 3ae83d70b1 autotest: ensure df log is present for rangefinder tests
there may not be a current onboard log present if we've just rebooted
2020-08-26 11:59:11 +10:00
Pierre Kancir 420587fb68 Tools: logger_metadata fix relative dir search 2020-08-25 20:01:27 +10:00
Pierre Kancir a181fcf8a2 Autotest: common: put generated parameter and LogMessage files into buildlogs directory 2020-08-25 20:01:27 +10:00
Peter Barker a523868b33 autotest: fix Beacon test 2020-08-25 17:21:50 +10:00
Andrew Tridgell 155b39bab3 autotest: added loiter-to-alt test mission 2020-08-25 10:39:18 +10:00
Randy Mackay 660579f2f4 Tools: fix copter beacon test params 2020-08-25 09:38:10 +09:00
Andrew Tridgell a1b5953927 Tools: added bootloader for f103-Airspeed 2020-08-25 09:59:15 +10:00
Andrew Tridgell 61f06f089e Tools: added bootloader for f303-MatekGPS 2020-08-25 09:59:15 +10:00
Peter Barker 69d246d63e autotest: add test for priority-based compass reordering 2020-08-25 08:30:04 +10:00
Peter Barker bb697dd4b9 autotest: avoid using mavproxy for testing message intervals 2020-08-24 19:33:37 +10:00
Andrew Tridgell 10eeea31e8 Tools: rebuild IO firmware 2020-08-24 16:32:35 +10:00
Peter Barker a190490b64 autotest: do not rely on MAVProxy for sending banner request 2020-08-24 15:26:57 +10:00
Peter Barker 00bfe04539 autotest: remove duplicate recovery code from set-message-interval test 2020-08-24 14:00:38 +10:00
Peter Barker 03d0eda7f1 autotest: use a passthrough progress function for Telem objects 2020-08-24 13:24:41 +10:00
Andrew Tridgell 245e0230b5 Tools: revert unintented change to f303 GPS bootloader 2020-08-24 07:01:51 +10:00
bugobliterator 4bd0e2f394 AP_CANManager: fix name for RX Queue size define 2020-08-24 06:48:56 +10:00
Peter Barker 67b71e2b94 autotest: add test for Plane dead-reckoning support 2020-08-21 18:16:40 +10:00
Pierre Kancir 8b92af732a Autotest: common: add wait_heartbeat to change_mode to clean up msg and give time to status to update 2020-08-21 13:35:51 +10:00
Pierre Kancir f73e4c0071 Autotest: copter: add test for mandatory alt estimation for Alt_hold 2020-08-21 13:35:51 +10:00
Peter Barker cddb5fb1cc autotest: use message hook when waiting for statustext
Eliminates a race condition when waiting for statustexts.  Getting the
current sim time slurps messages.
2020-08-21 12:26:12 +10:00
Pierre Kancir b7f46462f8 Autotest: common: reduce timeout on ArmFeature test
This is unnessary to wait for 60s for failure, 15s is enough
2020-08-21 09:13:32 +10:00
Peter Barker f14c9db568 autotest: improve debug around heli poshold takeoff test 2020-08-20 10:10:34 +10:00
bugobliterator c02c500ac5 param_metadata: add microseconds under known param type 2020-08-19 17:31:09 +10:00
Siddharth Purohit 4e17f8a23e waf: add CANManager library and use uavcan agnostic names CAN vars 2020-08-19 17:31:09 +10:00
Peter Barker 904981a0c3 waf: build with -Werror=undef 2020-08-19 14:46:39 +10:00
Peter Barker ebc28d817f travis: build mRoX21-777 with -Werror 2020-08-19 08:12:06 +10:00
Peter Barker a5aa963a77 autotest: fixes --tracker and --tracker-location sim_vehicle.py options 2020-08-18 15:26:03 +10:00
Mark Whitehorn a37b5c2c6b autotest: add rudder disarm checks for airmode 2020-08-18 11:42:34 +10:00
Pierre Kancir 0c3e9bbd4b Autotest: fix mavlink_time_boot format: should be int 2020-08-18 08:33:08 +10:00
Pierre Kancir acc4a1db3f Autotest: remove special case for vicon and default vicon for copter to false 2020-08-17 21:17:26 +10:00
Peter Barker c69908e7ea autotest: add proximity sensor readinds as if from depth camera 2020-08-17 11:20:12 +10:00
Peter Barker ea5aa594a3 autotest: add test for AP_Proximity_MAV 2020-08-17 11:20:12 +10:00
Peter Barker 1b481b6e6a Tools: uploader.py squelch warning when not able to find hwdefs 2020-08-15 11:59:40 +10:00
Peter Barker 82dd7ece6c autotest: fix frsky bitop on float issue
Crops up in Python 3.8:

    gpi_lat = self.tf_encode_gps_latitude(gpi.lat)
  File "/home/pbarker/rc/ardupilot/Tools/autotest/common.py", line 6183, in tf_encode_gps_latitude
    value = ((abs(lat)/100)*6) | 0x40000000
TypeError: unsupported operand type(s) for |: 'float' and 'int'
2020-08-15 10:42:47 +10:00
Pierre Kancir 52ae087fb5 Autotest: rover: remove some raw mavproxy cmd for rc 2020-08-15 09:16:24 +10:00
Pierre Kancir 388fef23d9 Autotest: common: remove use of some raw mavproxy cmd for rc 2020-08-15 09:16:24 +10:00
Pierre Kancir 30fa433faa Tools: don't add duplicate param to context 2020-08-14 18:16:47 +10:00
Mark Whitehorn 7d33017c8a Tools: scripts: uploader.py: update --identify option 2020-08-14 11:53:58 +10:00
Pierre Kancir fa4a01e8f9 autotest: copter: don't use raw reboot on fly_battery_failsafe() 2020-08-14 09:42:52 +10:00
Pierre Kancir 3c6d1a359a autotest: copter: catch exception on test_battery_failsafe to reset parameters 2020-08-13 12:09:23 +10:00
Pierre Kancir 5fe81706bb autotest: copter: catch exception on test_gcs_failsafe to reset parameters 2020-08-13 12:09:23 +10:00
Pierre Kancir 9c41462bf6 Tools: copter: correct flip test 2020-08-13 10:37:02 +10:00
Mark Whitehorn d0ff26e782 autotest: expand quadplane AirMode autotest 2020-08-13 08:47:27 +10:00
Mark Whitehorn b9830f657a autotest: add quadplane airmode test 2020-08-13 08:47:27 +10:00
climr 918dfc13f7 Tools: Add Horizon31 PixC4 to board_types.txt 2020-08-10 13:33:32 +10:00
Peter Barker 9cd5fdacfc Tools: autotest: add a test for motor test 2020-08-10 09:18:05 +10:00
Peter Barker f0482935cc autotest: slow down simulation to avoid receiving re-request of item
# avoid a timeout race condition where ArduPilot re-requests a
        # fence point before we receive and respond to the first one.
        # Since ArduPilot has a 1s timeout on re-requesting, This only
        # requires a round-trip delay of 1/speedup seconds to trigger
        # - and that has been seen in practise on Travis

AT-0417.0: Sending item with seq=0
AT-0417.2: Got (MISSION_REQUEST {target_system : 243, target_component : 250, seq : 0, mission_type : 1})
AT-0417.2: Got (MISSION_REQUEST {target_system : 243, target_component : 250, seq : 0, mission_type : 1})
AT-0417.2: Exception caught: Traceback (most recent call last):
  File "/home/travis/build/ArduPilot/ardupilot/Tools/autotest/common.py", line 3950, in run_one_test
    test_function()
  File "/home/travis/build/ArduPilot/ardupilot/Tools/autotest/rover.py", line 4216, in test_poly_fence
    self.test_fence_upload_timeouts()
  File "/home/travis/build/ArduPilot/ardupilot/Tools/autotest/rover.py", line 4057, in test_fence_upload_timeouts
    target_component=target_component)
  File "/home/travis/build/ArduPilot/ardupilot/Tools/autotest/rover.py", line 4010, in test_fence_upload_timeouts_2
    self.expect_request_for_item(item)
  File "/home/travis/build/ArduPilot/ardupilot/Tools/autotest/rover.py", line 3958, in expect_request_for_item
    raise NotAchievedException("Expected request for seq=%u" % item.seq)
NotAchievedException: Expected request for seq=1

The "AT" timestamps there are wallclock time.  Since speedup for Rover
is 8 by default, that could be as much as 1.6 seconds meaning a
re-request from ArduPilot would be legitimate.

I've added some debug, too - we now emit "Sending item with seq=1"
between those two "Got" lines.  That should make the problem clearer -
we've received a re-request rather than a request for the item after the
one we've already sent.
2020-08-09 20:13:27 +10:00
Peter Barker 749b678e14 autotest: add scan-build autotest steps 2020-08-07 16:00:18 +10:00
Peter Barker e51427a2bc autotest: add a test to ensure we get voltage from generator in battery_status message 2020-08-07 14:46:20 +10:00
Peter Barker 77df7c7a39 autotest: autotest the MaxBotixI2CXL i2c rangefinder code 2020-08-07 08:52:00 +10:00
Pierre Kancir aac416deb1 Tools: completion: simplify bash completion for sim_vehicle.py 2020-08-06 20:55:13 +10:00
Pierre Kancir 25c42b0ea9 Tools: completion: autotest subtest completion for ZSH 2020-08-06 20:55:13 +10:00
Pierre Kancir 1fa6138ca1 Tools: Autotest.py: Allow autotest subtests completion 2020-08-06 20:55:13 +10:00
Peter Barker 2a2a78d15d tools: fix a couple of minor issues in decode-ISCR 2020-08-06 14:59:09 +10:00
Pierre Kancir f2e6a79276 Tools: script: add a script to generate Mission Planner full parameters file 2020-08-05 22:32:33 +10:00
Pierre Kancir 4930142b6e Tools: add generator for MP parameter xml 2020-08-05 22:32:33 +10:00
Peter Barker 07abb3ab6a autotest: extend RichenPower test 2020-08-05 16:26:19 +09:00
Rishabh bac3660fca Tools: Push autotune switch test to run after avoidance tests 2020-08-05 15:37:04 +09:00
Rishabh cf04a01389 Tools: Increase timeout for avoidance autotest 2020-08-05 15:37:04 +09:00
Peter Barker b9dc7118d4 autotest: add do_timesync_roundtrip to do a timesync against SITL
On the assumption that ArduPilot processes mavlink packets
synchronously (or at least in order), after we have run a timesync
roundtrip we can reasonably expect any mavlink command we have sent
prior to the roundtrip to have been processed, and we should be able to
see the results in the mavlink stream.
2020-08-05 13:24:15 +10:00
Peter Barker 4640c24872 autotest: correct checking for no-logs string 2020-08-04 15:12:08 +10:00
Peter Barker b2748f19f6 autotest: correct validator for Distance wait-and-maintain 2020-08-04 15:12:08 +10:00