Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
57,653 Commits 70 Branches 507 Tags 670 MiB
Commit Graph

575 Commits

Author SHA1 Message Date
Andrew Tridgell 4f6da39bb7 AP_CANManager: support Benewake CAN 2021-11-30 09:49:20 +11:00
Andrew Tridgell 3f85eab272 AP_RangeFinder: added Benewake CAN Lidars 
includes support for setting CAN ID and min SNR
 2021-11-30 09:49:20 +11:00
Peter Barker f6aeb01994 AP_RangeFinder: signal quality reporting 2021-11-23 18:20:58 +11:00
Wynn, Jesse Stewart a7321cbae1 AP_RangeFinder_LightWareSerial: check dist for lost signal flags 
consider messages valid only if they are non-negative AND if the value is not a known lost-signal reading
 2021-11-18 12:06:57 +11:00
TunaLobster ba9381f40c AP_RangeFinder: fix ADC scaling on IOMCU 2021-11-16 14:12:43 +11:00
Shiv Tyagi 516eafa45b AP_Rangefinder: fail RF prearm checks for NoData/NotConnected statuses 
Earlier we only failed RF checks if we could not detect an RF instance but we should also fail it if the RF is not connected or we receive no data.
 2021-11-13 09:47:39 +09:00
divyateja04 001f6a29ee AP_RangeFinder: removed empty constructors 2021-10-31 09:49:25 +11:00
Andrew Tridgell 4f2bec72b6 AP_RangeFinder: rename uLanding to USD1_Serial 
this was rebranded by the vendor Ainstein a long time ago
 2021-10-26 15:31:12 +11:00
Andrew Tridgell c1b9585926 AP_RangeFinder: average over 100Hz frames in USD1 CAN driver 
this reduces noise
 2021-10-26 15:31:12 +11:00
Andy Piper a2bb0b01e8 AP_RangeFinder: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI 2021-10-26 11:42:12 +11:00
Sebastian Quilter 0f7c3e3964 AP_RangeFinder: make rangefinder ranges m rather than cm 2021-10-21 21:28:53 +11:00
Randy Mackay 85dbb70df5 AP_RangeFinder_NMEA: add hondex custom message support 2021-10-20 19:46:21 +11:00
Iampete1 f667c098a2 AP_RangeFinder: analog: check for valid pin 2021-10-06 18:42:51 +11:00
Shiv Tyagi 9729377bb3 AP_Rangefinder : make get_temp const 
This makes backend get_temp methods const

Co-Authored-By: Josh Henderson <69225461+hendjoshsr71@users.noreply.github.com>
 2021-10-03 09:21:31 -04:00
Gone4Dirt e0af10886b AP_RangeFinder: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Iampete1 17e8ea0136 AP_RangeFinder_Params: update PIN discription 2021-09-15 17:31:54 +10:00
Iampete1 0d3c00cb96 AP_Rangefinder: MAVLink: accept data only from configured orentation 2021-09-01 17:50:58 +10:00
Pierre Kancir bcfb07b39f AP_Rangefinder: fix override in constructor 2021-08-26 21:48:19 +10:00
bugobliterator e51d358552 AP_RangeFinder: use typename SIM instead of SITL as it conflicts with namespace name 2021-08-05 07:25:31 +10:00
bugobliterator 4312213e18 AP_RangeFinder: change class name from SITL::SITL to SITL::SIM 2021-08-05 07:25:31 +10:00
bugobliterator 98f5eb28db AP_RangeFinder: use separate register_driver method while contructing CAN Driver 2021-07-23 16:01:29 +10:00
Andrew Tridgell a0ef4f76e2 AP_RangeFinder: replaced Pixhawk with more appropriate wording in docs 2021-07-22 07:48:12 +10:00
Siddharth Purohit 0795225475 AP_RangeFinder: Use HAL_CANMANAGER_ENABLED instead of HAL_ENABLE_LIBUAVCAN_DRIVERS 2021-06-24 09:02:42 +10:00
Michael du Breuil b3a1e6a1ce AP_RangeFinder: Rearrange parameters to reduce memory usage 
Saves 4 bytes per instance, and with 10 instances this gives us an extra
40 bytes of RAM
 2021-06-22 10:08:02 +10:00
Pierre Kancir 117ca8a6ef AP_Rangefinder: make backend get_reading() pure virtual 2021-06-09 10:52:00 +09:00
Pierre Kancir 88b5ff8c6f AP_Rangefinder: make get_temp const 2021-06-09 10:52:00 +09:00
Siddharth Purohit 2e41077347 AP_RangeFinder: fix using labs on unsigned value subtraction 2021-05-26 17:40:19 +10:00
Randy Mackay fee30b4447 AP_RangeFinder: add get_temp and implement for NMEA driver 2021-04-20 09:17:48 +10:00
PYBrulin 240bfeb6bd AP_RangeFinder: TeraRangerI2C added case of out of range measurement 2021-04-06 10:44:13 +10:00
PYBrulin afe9573900 AP_RangeFinder: TeraRangerI2C redefining the output distance logic with OutOfRange cases 2021-04-06 10:44:13 +10:00
Randy Mackay 5912052a39 AP_RangeFinder: lightware legacy I2C retry count to 20 
This is consistent with the non-legacy I2C protocol
 2021-03-17 21:23:14 +09:00
murata 09f04e8a5a AP_RangeFinder: Devices are enabled and disabled by type 
AP_RangeFinder: Devices are enabled and disabled by type

AP_RangeFinder: Delete some description of I2C function address.
 2021-02-05 09:44:27 +11:00
Patrick José Pereira efffed0510 AP_RangeFinder: Add missing const in member functions 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2021-02-03 18:45:14 +11:00
Peter Barker 78b49a2c35 AP_RangeFinder: maxbotix: use i2c-address parameter 2021-01-19 11:20:47 +11:00
Peter Barker 496267115c AP_RangeFinder: MAVLink: use larger of min ranges / smaller of max ranges 2021-01-06 15:33:41 +11:00
Peter Barker cba5f142a7 AP_RangeFinder: correct MAVLink backend's out-of-range checks 2021-01-06 15:33:41 +11:00
Peter Barker 223e775a3c AP_RangeFinder_MAVLink: only set sensor type if we accept a reading 2021-01-06 15:33:41 +11:00
Peter Barker 40eb9a8b99 AP_RangeFinder: do not start the mavlink rangefinder as healthy 
Also takes the opportunity to clean things up a little
 2021-01-06 15:33:41 +11:00
Andrew Tridgell 66c05bef76 AP_RangeFinder: added USD1 CAN driver 
also known as uLanding CAN
 2021-01-01 17:29:54 +11:00
murata 282590668d AP_RangeFinder: Make measurement time and call back time static constant 
Co-authored-by: Pierre Kancir <pierre.kancir.emn@gmail.com>
 2020-12-30 18:29:35 +11:00
Tatsuya Yamaguchi 4dc5162d0a AP_RangeFinder: change i2c reading frequency to 50Hz 2020-12-19 08:14:54 -03:00
ashvath 54708d916b AP_RangeFinder: TFminiPlus driver outputs init failure to ground station 2020-12-19 08:14:54 -03:00
Tatsuya Yamaguchi b0ee6393ae AP_RangeFinder: TFminiPlus: set frame rate to 250hz 2020-12-19 08:14:54 -03:00
Peter Barker 1c57eed66c AP_RangeFinder: remove unused voltage_mv_orient method 
This is really backend-specific data and shouldn't be exposed
 2020-12-06 16:49:43 +11:00
Andrew Tridgell 0c05e9a2e7 AP_RangeFinder: fixed handling of instance numbers 
if a backend allocation failed then we could end up with the backend
being assigned to the wrong instance number. Switch to using
_add_backend() everywhere, and pass the instance number to
_add_backend() to ensure that it always uses the correct slot.

Also added comment explaining how num_sensors() works when we have a
sparse set of rangefinders configured
 2020-12-01 10:53:08 +11:00
Brent McLaughlin e241433c89 AP_Rangefinder: change lightware lost signal timer to 20 
The LightWare lost signal timer is set to 20 by the manufacturer.
 2020-12-01 10:34:54 +11:00
murata bbc673c668 AP_RangeFinder: Change rangefinder number 10 to A 2020-11-17 11:46:25 +11:00
Lucas De Marchi 4be9b4171b AP_RangeFinder: TFMiniPlus: respect max configured via param 
Do like other drivers do and cap the maximum reported value with what is
configured in the parameter.
 2020-11-11 19:23:41 +11:00
Lucas De Marchi 0e63a833e9 AP_RangeFinder: TFMiniPlus: fix out-of-range returned a no-data 
Other drivers consider that they received data even if the value is
reported as "out of range" by sensor. On the I2C driver for TFMiniPlus
we considered this case, too. However when the signal strength is very
low (and thus the distance would likely be out of range), we would end up
ignoring the new sample. With enough samples without any value this
would lead the status to turn to "NoData".
 2020-11-11 19:23:41 +11:00
Peter Barker 914316a529 AP_RangeFinder: remove unused variables 2020-10-01 21:13:20 +10:00
Peter Barker dd8361ba33 AP_RangeFinder: remove default case from Rangefinder init switch 
Allows the compiler to help the programmer fill in required code
 2020-09-10 20:52:06 +10:00
yaapu bc21e505e3 AP_RangeFinder: aligned msp message data struct name to gps,baro and mag 2020-09-09 06:35:50 +10:00
Peter Barker 72b49efc78 AP_RangeFinder: create and use new AP_HAL::PWMSource object 2020-09-08 16:10:50 +10:00
Rajat Singhal e9b3c54e6d AP_Rangefinder: Add SITL option in param description 2020-09-02 17:25:43 +10:00
Andrew Tridgell 34430e9d6c AP_RangeFinder: allow separate enable of MSP rangefinder 2020-09-02 05:56:46 +10:00
Andrew Tridgell 84f7589f2d AP_RangeFinder: allow separate enable of MSP rangefinder 2020-09-02 05:56:46 +10:00
Andrew Tridgell 17173871a4 AP_RangeFinder: fixed non-MSP build 2020-09-02 05:56:46 +10:00
yaapu 699ffcbcd2 AP_RangeFinder: added support for MSP based range finders 2020-09-02 05:56:46 +10:00
Siddharth Purohit 6ef85dd7eb AP_RangeFinder: use AP_CANManager library 2020-08-19 17:31:09 +10:00
Iampete1 e18c195df4 AP_RangeFinder: add SITL backend 2020-08-05 18:24:36 +10:00
Andrew Tridgell 8d5c51748f AP_RangeFinder: fixed legacy parsing of 65436 for lightware i2c 
some lidars will probe as legacy protocol and return 65436 as range
 2020-07-30 11:25:05 +10:00
Iampete1 2adbaf1a1d AP_RangeFinder_NMEA: decode each sentence once 2020-07-29 17:40:03 +10:00
Randy Mackay 9c7f382392 AP_RangeFinder: remove unused set_rfnd_bit 2020-07-08 11:42:10 +09:00
Randy Mackay 613d2c2e0a AP_RangeFinder: LightWareSerial gets small comment 2020-07-06 13:57:43 +09:00
murata 98feb06183 AP_RangeFinder: Add GYUS42v2 to the TYPE item 2020-07-05 08:52:03 +10:00
Peter Barker 6ec497229b AP_RangeFinder: add serial support for GY-US42v2 rangefinder 2020-07-04 13:40:10 +10:00
Randy Mackay 429e70fb94 AP_RangeFinder: LightwareSerial uses nullptr for strtof 2020-07-01 13:00:48 +09:00
Randy Mackay 85c4db6896 AP_RangeFinder: LightwareSerial driver loses unnecessary initialisation 2020-07-01 13:00:48 +09:00
Randy Mackay cdbc0c782b AP_RangeFinder: add sf30d binary protocol support 
Co-authored-by: Tatsuya Yamaguchi <susumu-336@hotmail.co.jp>
 2020-07-01 13:00:48 +09:00
Tatsuya Yamaguchi ed14518634 AP_RangeFinder: TYPE param becomes enable flag 2020-06-18 12:30:00 +10:00
Henry Wurzburg f9b02a6814 AP_RangeFinder: HC-SR04: Add glitch filter 2020-06-02 09:58:53 +10:00
Peter Barker fc1ea612b1 AP_RangeFinder: add support for HC-SR04 rangefinder 2020-06-02 09:58:53 +10:00
Andrew Tridgell 2dcf8a3b08 AP_RangeFinder: cope with beyond max range with LightwareI2C 2020-06-02 08:49:38 +09:00
Peter Barker af80c4a29f AP_RangeFinder: remove move-to-error-state for LeddarOne driver 
Just because there's a lot in your input buffer doesn't necessarily mean
the rangefinder is faulty.
 2020-05-26 09:20:32 +10:00
Peter Barker 95f9769041 AP_RangeFinder: use new UARTDriver discard_input method 2020-05-26 09:20:32 +10:00
Henry Wurzburg 23e7e2d193 AP_RangeFinder: rename Benewake types for easier identification 2020-05-21 08:45:30 +09:00
Andrew Tridgell d16f31711e AP_RangeFinder: fixed mixing UAVCAN and non-UAVCAN rangefinders 
UAVCAN rangefinders add themselves to the frontend drivers as the
devices appear. If they turn up before RangeFinder::init() is run then
this prevented init() from scanning for the other rangefinders as
num_instances is non-zero

This also fixes a race condition in updating num_instances in the
UAVCAN backend
 2020-05-12 09:45:15 +10:00
Andrew Tridgell 603e5c4b55 AP_RangeFinder: added get_address() 
allows AP_Periph to supply sensor_id for multiple CAN rangefinders
 2020-05-11 18:36:46 +10:00
Andrew Tridgell ffe9fa22a1 AP_RangeFinder: invalidate param count when changing param tree structure 2020-04-29 07:36:55 +10:00
Andrew Tridgell b102fd6b59 AP_RangeFinder: use GCS_SEND_TEXT() 2020-04-29 07:36:55 +10:00
Peter Barker b7a03ae5ad AP_RangeFinder: rename APMrover2 to Rover 2020-04-14 09:50:34 +09:00
Peter Barker adcfb60850 AP_RangeFinder: comment out no-loner-used PX4 enum entry 2020-02-12 21:18:47 +11:00
Peter Barker 6febbcdc13 AP_RangeFinder: remove incorrect and misleading comment 
Wrong on several counts.  detect calls this method.  The constructor
doesn't initialise the rangefinder.  detect doesn't return boolean.
 2020-02-12 21:18:47 +11:00
Patrick José Pereira a183d00b7e AP_RangeFinder: BLPing: Rework class to work with new firmware version 3.28 
- Uses the continuous message request

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2020-02-11 11:49:11 -05:00
Randy Mackay 7d8952a48a AP_RangeFinder: fix offset param for PWM driver 2020-02-03 19:32:34 +09:00
Randy Mackay 52ca1e016e AP_RangeFinder: minor fix in POS param description 2020-02-01 08:46:03 +09:00
Randy Mackay 9f3154372d AP_RangeFinder: POS param range of 5m and 1cm increment 2020-02-01 08:46:03 +09:00
Michael du Breuil 7bc1f4ff9b AP_RangeFinder: a to close reading is not the minimum distance 2020-01-28 11:32:19 +11:00
Andrew Tridgell 2fa6f534ab AP_RangeFinder: added get_type() API 2020-01-26 09:12:55 +11:00
murata b0af48745e AP_RangeFinder: VL53L1X LONG can be specified 
AP_RangeFinder: VL53L1X LONG can be specified

AP_RangeFinder: Add VL53L1X to device number 16

AP_RangeFinder: Add VL53L1X to device number 16
 2020-01-24 13:46:35 -07:00
Randy Mackay 141099078c AP_RangeFinder: increase leddarvu8 timeout to 0.5sec 2020-01-23 16:24:33 +11:00
Randy Mackay f269004610 AP_RangeFinder: fix detect for LeddarVu8 
Co-Authored-By: Peter Barker <pb-gh@barker.dropbear.id.au>
 2020-01-23 16:24:33 +11:00
Randy Mackay b068f15932 AP_RangeFinder: LeddarVu8 driver 2020-01-23 16:24:33 +11:00
Randy Mackay e5c3a7f7b5 AP_RangeFinder: typo fix for LeddarOne 2020-01-23 16:24:33 +11:00
Randy Mackay 266a908b83 AP_RangeFinder: serial backend get_reading returns false 2020-01-23 16:24:33 +11:00
Randy Mackay 9ac10c3af9 AP_RangeFinder: remove virtual from _get_mav_distance_sensor_type 2020-01-23 16:24:33 +11:00
Andrew Tridgell 7dcb5c60b0 AP_RangeFinder: use take_blocking instead of HAL_SEMAPHORE_BLOCK_FOREVER 
this makes for cleaner and smaller code as the failure case is not
needed
 2020-01-19 20:19:30 +11:00
Randy Mackay bcef478eab AP_RangeFinder: update OFFSET param description to clarify only for analog and pwm 2020-01-18 14:15:20 +09:00
Randy Mackay 2bdb2f67ab AP_RangeFinder: PWM driver adds offset param value 2020-01-18 14:15:20 +09:00
Michael du Breuil d92c4dc892 AP_Rangefinder: Fix bad subgroup pointer for drivers 2020-01-15 12:13:44 +11:00