Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-06 16:08:28 -04:00
Code Issues Packages Projects Releases Wiki Activity
17,369 Commits 71 Branches 510 Tags 769 MiB
0cd584c293
Commit Graph

8280 Commits

Author SHA1 Message Date
Julien BERAUD
0cd584c293 AP_Compass: fix rotation for bebop AK8963 
Set the correct rotation for bebop
 2015-07-10 16:46:29 +10:00
Julien BERAUD
7dd0b5fae6 AP_Compass: removed _spi_sem and _spi 2015-07-10 16:46:29 +10:00
Julien BERAUD
d407737434 AP_Baro: added MS5607 support 2015-07-10 16:46:29 +10:00
Julien BERAUD
3cf952d1f8 AP_InertialSensor: add fifo support for MPU6000 
And remove the use of data rdy in this case
 2015-07-10 14:24:09 +10:00
Julien BERAUD
8a76ff53bd AP_InertialSensor: add i2c bus driver for MPU6050 2015-07-10 14:24:09 +10:00
Julien BERAUD
1679728730 AP_InertialSensor: Configure SPI as a generic bus for MPU6000 
Add the possibility to implement an i2c bus communication for the
MPU6050 on parrot bebop
 2015-07-10 14:24:09 +10:00
Julien BERAUD
f0bed711cf AP_HAL: added AK8963 I2C defines 2015-07-10 14:23:18 +10:00
Julien BERAUD
e0b59942b0 AP_HAL: changed log directories for bebop 2015-07-10 14:23:18 +10:00
Julien BERAUD
5c414b4ca2 AP_HAL: Fix Compass I2C address for Bebop 2015-07-10 14:23:18 +10:00
Julien BERAUD
8d6123928f AP_HAL: Add i2c bus numbers and addresses 2015-07-10 14:23:18 +10:00
Julien BERAUD
bef8001a09 AP_HAL: added MS5607 baro define 2015-07-10 14:23:17 +10:00
Julien BERAUD
eea7ea8488 AP_HAL: split MPU6000 INS defines for I2C and SPI 2015-07-10 14:23:17 +10:00
Julien BERAUD
7275e33e79 AP_HAL: add the possibility to have more than 1 i2c 
Bebop drone has 3 i2c
 2015-07-10 14:23:17 +10:00
Andrew Tridgell
a6f62c208e AP_HAL: added bebop Linux board type 2015-07-10 10:22:59 +10:00
Julien BERAUD
b32259307d AP_GPS: Add baudrate 230400 for GPS 
Needed by bebop gps by default
 2015-07-10 10:12:52 +10:00
Andrew Tridgell
282efe2d57 AP_Baro: fixed example to run accumulate at 50Hz 2015-07-10 09:59:35 +10:00
Andrew Tridgell
c83d5b1f08 AP_Compass: only build AK8963 driver on Linux 
must match MPU9250 build
 2015-07-09 11:57:27 +10:00
Andrew Tridgell
f4a9f9876f HAL_PX4: make usb_connected() more robust 
thanks to a suggestion from Phillip Kocmoud, this should fix issues
with the XUAV-X2
 2015-07-08 11:19:07 +10:00
Randy Mackay
2f8a7f316f Notify: enable toshibaLED for NAVIO 2015-07-07 20:08:19 +09:00
Staroselskii Georgii
402f46c56f AP_Airspeed: fixed a typo in the ARSPD_DEFAULT_PIN define 
There was a redundant elif for Linux builds.
 2015-07-07 21:02:21 +10:00
Randy Mackay
1d732ddf62 Mount: param desc rename from MAVLink to 3DR Solo 2015-07-07 13:29:24 +09:00
mirkix
1b0f482d37 AP_RangeFinder: Add support for HC-SR04 Range Finder connected to BBB 2015-07-07 08:00:33 +10:00
Randy Mackay
d192b3ccea Compass: set device id for ak8963 and hmc5843 2015-07-06 21:04:46 +09:00
Randy Mackay
ad1f9c4829 DataFlash: add ORGN message 2015-07-06 12:11:49 +09:00
Randy Mackay
03356a8d3a OptFlow: fix parameter descriptions 2015-07-06 11:37:38 +09:00
dgrat
f56f584233 Compass: Improved field rounding in learning 
Signed-off-by: Daniel Frenzel <dgdanielf@gmail.com>
 2015-07-06 11:31:58 +10:00
Daniel Frenzel
c49e44d02c HAL_LInux: RCInput for Navio 
Cleaned the code a bit

Signed-off-by: Daniel Frenzel <dgdanielf@gmail.com>
 2015-07-06 11:19:33 +10:00
kozinalexey
20a04bad77 AP_GPS: request RMC message in NMEA driver 2015-07-06 11:16:12 +10:00
dzollo
5d5d9dc137 AP_GPS: Fix max/min bug on SBP buffering. Log messages whether SBP driver recognizes the msg_type or not. 2015-07-06 10:53:35 +10:00
Lucas De Marchi
efec7723ff AP_InertialSensor: reset the MPU9250 chip on startup 
Now that the initialization of MPU9250 is shared between the
AP_InertialSensor and other drivers using it as a backend, we can reset
the MPU9250 in order to put it in a known state.
 2015-07-06 10:48:07 +10:00
Lucas De Marchi
1deb837e70 AP_Compass: Use common function in MPU9250 for initialization 2015-07-06 10:48:07 +10:00
Lucas De Marchi
eb4e2ac2e5 AP_InertialSensor: factor out MPU9250 initialization 
Now we have the initialization code split in 2 parts:

1) Making sure the MPU9250 chip is alive and working: this is now in a
static function that may be called by other drivers that use MPU9250 as
backend.

2) The configuration of gyro and accel. Once the first part is completed
successfully the AP_InertialSensor_MPU9250 finishes the configuration of
the sensors it uses.

The only change in behavior here is that before we would try 25 time (5x
inside _hardware_init time 5x inside _init_sensor() that calls the first
function) to "boot the chip" and now we are doing "only" 5.
 2015-07-06 10:48:07 +10:00
Lucas De Marchi
953bfbd3fe AP_InertialSensor: provide static methods for spi transactions 
Add static methods to do the SPI transactions and provide the wrapper
methods when we have an instance of the object. This is useful so these
methods can be called from other contexts when the AP_InertialSensor
hasn't been initialized yet.
 2015-07-06 10:48:07 +10:00
Lucas De Marchi
fde43a77b3 AP_HAL_Linux: allow to change spi device state 
Allowing to change the SPI device state allows us to save the
information whether the device was already initialized and avoid 2
separate drivers to initialize it.
 2015-07-06 10:48:06 +10:00
Lucas De Marchi
384d650a23 AP_HAL: allow to have spi device state 2015-07-06 10:48:06 +10:00
Staroselskii Georgii
26c8007c96 AP_Compass: updated backend detect method 
Uses reimplemented AK8963 driver. There's also no need trying to detect this
compass twice. Actually, it might even be bad, because the current code can
allocate an AK8963 object twice.
 2015-07-06 10:48:06 +10:00
Staroselskii Georgii
7a417d1151 AP_Compass: AK8963 rework 
Got rid of extra abstraction layer. There is no need for that now.
 2015-07-06 10:48:06 +10:00
mirkix
f82344358f AP_InertialSensor: Change BBBMINI standard orientation 2015-07-06 10:12:39 +10:00
mirkix
e6363ea95d AP_HAL_Linux: BBBMINI uses /dev/i2c-2 2015-07-06 10:09:21 +10:00
Lucas De Marchi
b211b86204 AP_HAL_Linux: don't manually define number of spi devices 
It's error-prone, let's make the compiler define it for us.
 2015-07-06 10:07:22 +10:00
Lucas De Marchi
82314ee4a3 AP_Common: add helper macro ARRAY_SIZE 2015-07-06 10:07:21 +10:00
Andrew Tridgell
1f58e0080a SITL: fixed some build warnings 2015-07-06 09:21:49 +10:00
Andrew Tridgell
8f41d97548 AP_Math: fixed build error on PX4 
variable set but not used with recent longitude_scale change
 2015-07-06 08:19:57 +10:00
Andrew Tridgell
099392d3ca AP_Math: don't optimise longitude_scale on faster CPUs 
it causes problems with replay
 2015-07-05 17:27:53 +10:00
Andrew Tridgell
88a90495b2 HAL_SITL: allow for more data before GPS pipe flush 2015-07-04 15:14:39 +10:00
Andrew Tridgell
21c895f6f3 AP_GPS: prevent extra NMEA messages causing rapid fix rates 
unexpected messages could cause the GPS driver to report a very high
fix rate, which can confuse the EKF
 2015-07-03 22:08:05 +10:00
Paul Riseborough
4fb7beba4b AP_NAvEKF: Prevent failure due to magnetometer fusion numerical errors 
If a badly conditioned covariance matrix causes negative innovation variances, then the filter will diverge. The previous approach of increasing process noise was not effective in some cases, so a hard reset of the covariance matrix has been adopted to guarantee recovery.
This fixes a numerical error observed using the replay on flight log which had significant periods of compass rejection.
 2015-07-02 18:07:22 +10:00
Randy Mackay
43b1694c76 Compass: add third compass to PRIMARY param description 2015-07-02 14:19:30 +09:00
Peter Barker
844f050cf3 DataFlash: correct zero-byte-file handling in CLI 
-rw-rw-r-- 1 pbarker pbarker   2105344 Jul  1 16:10 1.BIN
-rw-rw-r-- 1 pbarker pbarker         0 Jul  1 19:35 2.BIN
-rw-rw-r-- 1 pbarker pbarker   2494464 Jul  1 16:58 3.BIN
-rw-rw-r-- 1 pbarker pbarker 128503808 Jul  1 20:22 4.BIN
-rw-rw-r-- 1 pbarker pbarker         3 Jul  1 19:46 LASTLOG.TXT

Before fix:

2 logs
Log 3 in logs/3.BIN of size 2494464 2015/7/1 6:58
Log 4 in logs/4.BIN of size 128503808 2015/7/1 10:22

After Fix:

4 logs
Log 1 in logs/1.BIN of size 2105344 2015/7/1 6:10
Log 2 in logs/2.BIN of size 0 2015/7/1 9:35
Log 3 in logs/3.BIN of size 2494464 2015/7/1 6:58
Log 4 in logs/4.BIN of size 128503808 2015/7/1 10:22

If the last file was zero bytes, no files would be shown.
 2015-07-02 08:53:18 +10:00
Andrew Tridgell
5b0394eb05 AP_Compass: start MPU9250 driver at low speed 
this raises the chances of successful init of the MPU9250
 2015-07-02 08:48:06 +10:00