Ferruccio1984
e935913f95
AP_Motors: Support for Autorotation implementation
...
-enables faster re-spool(user settable timer) after power engagement
-flare&touchdown controllers;
-rangefinder for distance from ground evaluation;
-higher refresh rate for rangefinder;
-attitude targets implementation for "guided" autorotation;
-retrieve zero lift collective position
2023-02-05 17:54:33 -05:00
UbhayAnand1
bb05f40560
AP_Motor: removed redundant statements
2023-01-30 08:18:08 +09:00
UbhayAnand1
5da7ad025b
AP_Motors: Corrected the parameters.
2023-01-30 08:18:08 +09:00
Peter Barker
ad57141a85
AP_Motors: tidy includes of SRV_Channel.h
2023-01-25 22:30:55 +11:00
Andy Piper
c620ba58df
AP_Motors: use _dt instead of loop rate for throttle slew calculation
2023-01-11 18:59:52 +11:00
Andy Piper
ad94c5cab1
AP_Motors: calculate throttle slew rate
...
use derivative filter and apply filtering to slew detector
2023-01-11 18:59:52 +11:00
Bill Geyer
93b0519ad2
AP_MotorsHeli: improve collective to yaw compensation
2022-12-22 07:07:34 -05:00
Leonard Hall
67205f8114
AP_Motors: Support changing update period
2022-12-13 17:10:06 +11:00
Iampete1
d5082e25e8
AP_Motors: output_motor_mask mask to uint16_t
2022-11-29 10:53:59 +11:00
Peter Barker
1b4f200cfd
AP_Motors: remove GCS.h from library header files
2022-11-16 18:29:07 +11:00
bnsgeyer
70c2775949
AP_MotorsHeli: update H_DUAL_MODE description to include coaxial
2022-11-16 14:17:54 +09:00
Peter Barker
3eecf7b71d
AP_Motors: change namespace of MultiCopter and FixedWing params
...
this stops the libraries knowing anything about AP_Vehicle
2022-11-09 19:04:37 +11:00
Iampete1
7cafcf7b90
AP_Motors: Multicopter: add motor pwm param range check
2022-09-19 20:57:51 -04:00
Peter Barker
d21aa2a1ed
AP_Motors: add and use AP_RPM_ENABLED
...
... and backend-specific equivalents
2022-09-20 09:28:27 +10:00
Andrew Tridgell
3d63a968cf
AP_Motors: added a SPIN_MIN check
...
and check SPIN_ARM <= SPIN_MIN
2022-09-14 21:45:20 +01:00
Iampete1
f3dc805978
AP_Motors: Block Spoolup: stop advance from ground idle
2022-09-07 17:03:03 +01:00
Randy Mackay
ff91bbd762
AP_Motors: add spoolup block
2022-09-07 17:03:03 +01:00
Iampete1
e72e5a2751
AP_Motors: add pre-arm check
2022-09-07 17:54:16 +10:00
Henry Wurzburg
8b02f11c23
AP_Motors: refactor to allow frame type symbols to be created for ELF
2022-08-09 10:06:18 +10:00
Iampete1
c1a9f75034
AP_Motors: params always use set method
2022-08-03 13:43:48 +01:00
Andy Piper
f666c71676
AP_Motors: add BF/X cinelifter octaquad configuration
2022-08-03 17:06:38 +10:00
Iampete1
ad8b9f58df
AP_Motors: use set and defualt
2022-07-20 17:59:59 +10:00
Peter Barker
c00d712adc
AP_Motors: remove transitive include dependencies
2022-07-20 17:32:24 +10:00
chobitsfan
a723abf986
AP_Motors: reuse spool_step for code refactoring
2022-07-11 08:39:34 +09:00
murata
0b357faf7e
AP_Motors: Resolve Issue 20894
2022-06-07 10:02:11 +10:00
Andrew Tridgell
b2e43d1dee
AP_Motors: fixed override of MOT_PWM_MIN/MAX in defaults.parm
...
need to check configured() not configured_in_storage()
2022-06-06 13:11:50 +10:00
Andy Piper
3d9639181e
AP_Motors: make sure ESC type is initialized early
2022-05-25 17:06:08 +10:00
Andrew Tridgell
f00a227b33
AP_Motors: more changes for 32 bit servo mask
2022-05-22 12:07:37 +10:00
Iampete1
43832649ec
AP_Motors: convert to 32 bit motor mask
2022-05-22 12:07:37 +10:00
Peter Barker
434f49e6b6
AP_Motors: correct initialised_ok state for HeliDual+Quad
...
initialised_ok was being set to false when frame/class was set as the
method was not overridden and thus Heli's set_frame_and_class was
setting initialised_ok to false. When the init_output method was called
it would be unconditionally reset to true.
2022-05-18 12:25:26 +09:00
Tatsuya Yamaguchi
dbae31fb15
AP_Motors: Add Tricopter only to the description of YAW_SV_ANGLE
2022-05-10 09:35:11 +10:00
Peter Barker
8930b5f6f5
AP_Motors: tidy includes
2022-05-03 09:14:58 +10:00
murata
6d4a923cce
AP_Motors: Change from division to multiplication
2022-03-16 18:41:52 +11:00
Iampete1
bb1dc2e9a1
AP_Motors: update no motor found warning message
2022-03-09 08:46:55 +09:00
Peter Barker
5d35d8a02c
AP_Motors: include cleanups
2022-03-01 11:21:33 +11:00
Bill Geyer
f7b420f131
AP_Motors: move turbine start to update_turbine_start and style cleanup
2022-02-23 14:22:47 +09:00
Ferruccio1984
3a67b17142
AP_Motors: tradheli support for turbine start
2022-02-23 14:22:47 +09:00
Iampete1
8af5f5b2d7
AP_MotorsMulticopter: check interlock state in output_motor_mask
2022-02-10 07:43:40 +09:00
Iampete1
5181003228
AP_Motors: always check armed and interlocked in motor test
2022-02-10 07:43:40 +09:00
Peter Barker
06c61070dc
AP_Motors: add and use AP_MOTORS_FRAME_DEFAULT_ENABLED
2022-02-08 11:06:24 +11:00
Bill Geyer
87fd0480bb
AP_Motors: Tradheli-update coll_land_min default
2022-02-07 06:23:37 -05:00
Peter Barker
bd4aed80dc
AP_Motors: tweak logging structure construction
...
const and avoid assignment rather just do initialisation
allows for static checking of narrowing conversions
2022-01-21 21:34:57 +11:00
Iampete1
86578d5cec
AP_Motors: add local loging of MOTB
2022-01-18 10:18:10 +11:00
Iampete1
8b54665a48
AP_Motors: example: remove SRV_Channels calls
2022-01-13 23:33:34 +11:00
Peter Hall
1fde5b3ef1
AP_Motors: tailsitter: add external min throttle limit
2022-01-11 10:37:38 +11:00
Iampete1
70897b5e38
AP_Motors: allow custom frame string from scripting
2022-01-05 19:51:19 +11:00
Andrew Tridgell
c44b8cf73a
AP_Motors: fixed PWM_TYPE range for quadplanes
...
when motors don't start at SERVO1 we were applying the range to the
wrong output.
This allows users to control the PWM of individual motors precisely
for quadplanes where calibration of motors is difficult
2021-12-29 18:40:41 +11:00
Bill Geyer
afaff18bd0
AP_Motors: modifications based on suggested changes
2021-12-14 22:50:05 -05:00
Bill Geyer
a8d74c6414
AP_Motors: Tradheli- add governor engaged message over GCS
2021-12-14 22:50:05 -05:00
Bill Geyer
2ac157b188
AP_Motors: Tradheli- fix governor spool up bug
2021-12-14 22:50:05 -05:00
MidwestAire
22c2329063
AP_Motors:Heli_RSC - throttle curve _control_output does not need a constrain_float
...
- change lower limit of governor enaged output to 150% of idle speed
- add governor_reset() function
- remove governor defaults from header
- rearrange governor metadata in alphabetical order, assign new eeprom slot for rpm
2021-12-14 22:50:05 -05:00
MidwestAire
77f0fdf112
AP_Motors:clean up whitespace in heli motors class
2021-12-14 22:50:05 -05:00
Bill Geyer
ea90217e09
AP_Motors: fix heli RSC parameter indices
2021-12-14 22:50:05 -05:00
Bill Geyer
05e8285f93
AP_Motors: use RPM singleton to get rpm in RSC
2021-12-14 22:50:05 -05:00
MidwestAire
301238fb8a
AP_Motors:Heli_RSC - update governor to new torque integrating design with autothrottle
2021-12-14 22:50:05 -05:00
MidwestAire
42a131522b
AP_Motors:Heli - new rotor speed control modes for autothrottle governor
2021-12-14 22:50:05 -05:00
Bill Geyer
3b40df133e
AP_Motors: add spool down complete flag
2021-12-05 22:12:13 -05:00
Shiv Tyagi
4483b9d6fe
AP_Motors: add matrix for deca-cwx frame
...
This adds a missing matrix for deca-cwx frame
2021-11-23 15:52:25 +09:00
Hwurzburg
2f4bcfb21c
AP_Motors: change H_COLL_HOVER to H_COL_HOVER for consistency
2021-11-18 14:37:05 -05:00
Peter Barker
55cdbd208d
AP_Motors: move from ENABLE_SCRIPTING to AP_SCRIPTING_ENABLED
2021-11-15 20:27:40 +11:00
Peter Barker
9e8126d07c
AP_Motors: ensure ENABLE_SCRIPTING is always defined
2021-11-15 20:27:40 +11:00
Bill Geyer
d2c37daa66
AP_Motors: change internal variable names and methods for mid collective to be more accurate
2021-11-10 16:45:17 -05:00
Bill Geyer
183b5e9e6d
AP_Motors: update H_SV_MAN parameter to reflect zero thrust collective
2021-11-10 16:45:17 -05:00
Bill Geyer
d02097bf1c
AP_Motors: add protection for new tradheli parameters
2021-11-10 16:45:17 -05:00
Bill Geyer
1a50dce206
AP_Motors: coll setup uses actual blade pitch angle
2021-11-10 16:45:17 -05:00
Iampete1
6c29eb73d2
AP_Motors: Coax: correct array indexnig offset
2021-11-10 11:52:19 +09:00
Iampete1
291ab5b5f2
AP_Motors: Coax: remvoe servo outs from motor mask
2021-11-10 11:52:19 +09:00
Hwurzburg
47028f136e
AP_Motors: change build option name to new standard
2021-11-08 19:13:00 +09:00
Hwurzburg
0b5123b194
AP_Motors: add Y4 Frame type to Quadcopters
2021-11-05 07:39:27 +11:00
Mirko Denecke
8b46ab66bd
AP_Motors: remove throttle roll adjust for single motor tailsitter
2021-11-03 12:32:31 +11:00
Hwurzburg
9349abfe48
AP_Motors: add build options for each frame class
2021-10-27 07:59:52 +09:00
Iampete1
b595beab10
AP_Motors: set ouput scaled with float
2021-10-20 18:29:58 +11:00
Iampete1
d16be50e57
AP_Motors: add PWM min and max param conversion function
2021-10-11 22:19:17 -04:00
Iampete1
14dfac42e7
AP_Motors: remove use of external PWM min and max
2021-10-11 22:19:17 -04:00
Iampete1
bc29735cb2
AP_Motors: make pwm_type protected and add helpers
2021-10-06 18:59:57 +11:00
Iampete1
1371499022
AP_Motors: add note about test to new inverse functions
2021-10-01 22:04:51 +01:00
Iampete1
484a0b989f
AP_Motors: add expo inverse test example
2021-10-01 22:04:51 +01:00
Iampete1
0c1fe0b373
AP_MotorsMulticopter: add inverse thrust_to_actuator and thrust curve functions
2021-10-01 22:04:51 +01:00
Iampete1
1a2ea893b6
AP_MotorsMatrix: correct octo I testing order
2021-09-13 13:39:03 +09:00
Peter Barker
380d962648
AP_Motors: do not use int version to define motors
2021-09-08 18:20:44 +10:00
Peter Barker
dbb43a5746
AP_Motors: remove motor_num from motor definition structures
...
Every structure simply used the defines in sequence, meaning 0, 1, 2, 3
etc. Handily we have a loop counter where we use these structures...
2021-09-08 18:20:44 +10:00
Peter Barker
a152ad70a9
AP_Motors: use structures to save flash when initialising motors (raw motors)
2021-09-08 18:20:44 +10:00
Peter Barker
26385009ca
AP_Motors: use structures to save flash when initialising motors
2021-09-08 18:20:44 +10:00
Peter Barker
5f980929d9
AP_Motors: use add_motors to save flash
2021-08-31 20:23:58 +10:00
Andy Piper
513aa592e4
AP_Motors: add accessors for turtle mode
2021-08-12 19:00:51 +09:00
Andy Piper
30252c1b3f
AP_Motors: remove tri yaw servo from motor mask
2021-08-03 11:16:50 +09:00
Andrew Tridgell
4b9311d87d
AP_Motors: added new MOT_PWM_TYPE=8 for PWM range
...
this allows multirotors to set individual PWM ranges per motor. This
is needed for heliquads flying as multirotors
2021-07-28 17:40:40 +10:00
Iampete1
e75d3b68e6
AP_Motors: move AP_MotorsUGV to new AR_Motors directory
2021-07-20 10:48:01 +09:00
Iampete1
6848cbc241
AP_Motors: add scripting dynamic mixer, allowing varable geometry vehicles
2021-07-20 09:19:28 +10:00
Andrew Tridgell
83158ceadb
AP_Motors: fixup build for ftype conflict
2021-07-10 07:20:41 +10:00
Peter Barker
183cee3f2c
AP_Motors: remove @Values from param metadata where @Bitmask exists
2021-06-23 18:37:34 +10:00
Peter Barker
c28a03728d
AP_Motors: tidy frame description strings
...
Before: AP: Frame: TRI/
After: AP: Frame: TRI
2021-06-21 16:30:37 +10:00
Leonard Hall
ac41bb50ee
AP_Motors: correct expo parameter description and internal limits
2021-06-21 08:41:31 +09:00
Andy Piper
96d0e8cf3f
AP_Motors: add comments to AP_MotorsUGV
2021-06-07 20:16:26 +09:00
Andy Piper
7c213a8bbf
AP_Motors: move AP_MotorsUGV here
...
add singleton and motor_mask to AP_MotorsUGV
2021-06-07 20:16:26 +09:00
Hwurzburg
57ee6ffdfe
AP_Motors: correct H_SV_MAN metadata warning
2021-05-25 10:22:21 +10:00
Peter Hall
42538c7083
AP_Motors: add throttle factor to Matrix
2021-05-25 09:01:06 +09:00
Dr.-Ing. Amilcar do Carmo Lucas
2393097417
AP_Motors: Use the same limits described in the wiki
...
According to Leonard Hall's tuning instructions at:
https://ardupilot.org/copter/docs/tuning-process-instructions.html
Fix a typo
2021-05-18 09:54:23 +10:00
Andy Piper
d70b8425f7
AP_Motors: trigger digital throttle range with digital outputs
2021-05-12 21:02:42 +10:00
Peter Hall
ed7db5b2b6
AP_Motors: tailsitter: slew outputs and output throttle directly
2021-04-27 09:37:32 +10:00
Andrew Tridgell
ea3657e941
AP_Motors: added accessors for ff output to motors
...
needed for tailsitters
2021-04-13 10:28:47 +10:00
Sergey Bokhantsev
ef95bf088c
AP_Motors: Constrain get_throttle_hover value with allowed range
2021-04-01 13:06:02 +09:00
murata
8e8f2b93a7
AP_Motors: Add DECA frame class and type string
2021-03-09 19:59:10 +09:00
murata
9228925bea
AP_Motors: Battery voltage compensation maximum voltage
2021-03-05 08:48:20 +09:00
Randy Mackay
0c9559db6d
AP_Motors: fixup octaquad CW_X motor directions
2021-02-22 11:00:44 +09:00
Iampete1
9ace8ed216
AP_Motors: Matrix 6DoF scripting add get_frame_string
2021-02-09 12:43:54 +09:00
Peter Hall
cc26a520bc
AP_MotorsMatrix: init to virtual and remove duplicate set initalised
2021-02-09 12:43:54 +09:00
Iampete1
5c3725d899
AP_Motors: add 6DoF scripting matrix mixer
2021-02-09 12:43:54 +09:00
Gone4Dirt
6dc100728f
AP_Motors: Fix spelling of autorotation flag
2021-02-08 22:09:49 -05:00
Mark Whitehorn
9bc8a8c912
AP_Motors: make frame*string getters more const
2021-02-09 12:43:53 +11:00
Mark Whitehorn
6b2184a53a
AP_Motors: add frame_class and frame_type strings
...
move frame_class/type string assignments down into subclasses
2021-02-09 12:43:53 +11:00
Patrick José Pereira
bdc14c60fb
AP_Motors: Add missing const in member functions
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-03 18:45:14 +11:00
Iampete1
fca6f7027b
AP_Motors: allow Matrix config from scripting
2021-01-26 11:07:36 +09:00
Peter Hall
d0e1e85b9e
AP_Motors: add get_frame_mav_type
2021-01-26 11:07:36 +09:00
Peter Barker
8f8283e0f0
AP_Motors: rc_map_mask -> motor_mask_to_srv_channel_mask
...
the naming of this function precedes our rc/srv-channel split
2021-01-05 10:19:32 +11:00
bnsgeyer
09b9ad83dc
AP_Motors: tradheli - add support to determine below mid collective
2020-12-21 23:33:48 -05:00
bnsgeyer
6c8a85ee04
AP_Motors: updates to new integrator and make selectable
2020-12-21 23:33:48 -05:00
bnsgeyer
84fb3afbcb
AP_Motors: Tradheli support for integrator management and hover collective learning
2020-12-21 23:33:48 -05:00
Iampete1
69bec46fa8
AP_Motors: Tailsitter: don't apply roll and pitch compsation gain
2020-12-22 11:00:59 +11:00
bnsgeyer
62758ffd99
AP_Motors: Dual-heli-keep intermeshing from using DCP to yaw mixer
2020-12-16 19:52:23 -05:00
PittRBM
3f405590c7
AP_Motors: Dual Heli-add support for intermeshing rotor
2020-12-16 19:52:23 -05:00
bnsgeyer
ebd83b756b
AP_Motors: add DCP trim feature for Dual Heli
2020-12-17 09:01:02 +11:00
Andrew Tridgell
c504e2db04
AP_Motors: added disable_yaw_torque() method
...
this is used for tilt-vectored quadplanes to use only vectoring for
yaw control. This avoids some nasty transition issues
2020-12-16 08:45:11 +11:00
murata
159a6c7ed6
AP_Motors: Support for decacopters
2020-12-08 11:59:10 +11:00
Iampete1
681f45c4e0
AP_MotorsMulticopter: make thrust to actuator public
2020-11-18 19:33:21 +11:00
Iampete1
0c2037438b
AP_Motors: output mask: do not apply copter sin params and epxo
2020-11-10 11:09:56 +11:00
Peter Barker
41ab59dcdb
AP_Motors: eliminate flags structure
...
Saves about 44 bytes
2020-09-22 20:26:24 +10:00
Iampete1
152e2366f0
AP_Motors: Tri: dont check yaw servo on plane
2020-09-22 09:12:14 +10:00
Mark Whitehorn
d3c1838fbe
AP_Motors: remove AP_MotorsMatrixTS
2020-09-08 10:50:31 +10:00
Randy Mackay
8629923783
AP_Motors: minor whitespace fix
2020-08-10 09:33:43 +09:00
Josh Welsh
e77bc1ce9d
AP_Motors: Tradheli servo_test fix
2020-08-10 09:16:44 +09:00
Randy Mackay
2d8c5a7bc4
AP_Motors: remove names from cpp files
2020-07-14 13:27:07 +10:00
Patrick José Pereira
8bb74a12d0
AP_Motors: Remove double underscore header guard
...
The code now uses `#pragma once` and double underscore as a prefix
can result in undefined behaviour.
Ref: https://eel.is/c++draft/lex.name#3.1
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-07-03 14:53:33 +10:00
Gone4Dirt
1b7672a84f
AP_Motors: Correctly adjust heli run up timer in bailout
2020-05-28 18:50:08 -04:00
Gone4Dirt
b2d2bf61da
AP_Motors: Support autorotation windows on external governors
2020-05-20 21:56:09 -04:00
murata
509d376c29
AP_Motors: Change the tab code to whitespace
2020-04-27 09:29:32 +09:00
Peter Hall
2f036c65f3
AP_Motors: MotorsMulticopter fix floating boost output
2020-03-02 18:22:30 +09:00
Rishabh
aec65ed6ff
AP_Motors: Added cwx motor setup for hexa, octa and octaquad
2020-02-19 11:28:25 +09:00
bnsgeyer
d4e5e1bd3d
AP_Motors: tradheli - fix quad heli collective structure
2020-02-14 09:29:50 +09:00
Peter Barker
c4ed6d0e96
AP_Motors: ensure _pwm_min and _pwm_max are not equal
...
AP_Motors: adjust check_mot_pwm_params for clarity
2020-01-30 14:49:16 +09:00
Randy Mackay
bff978570f
AP_MotorsMulticopter: fixup check_mot_pwm_params
...
fix _pwm_max is positive check
returns true if params are valid
constify method
2020-01-30 10:01:54 +09:00
Randy Mackay
f00bf77af7
AP_MotorsMulticopter: minor formatting fix
2020-01-30 08:33:00 +09:00
ashvath
d97fdcac31
Copter: function for mot_pwm checks
2020-01-30 08:29:56 +09:00
Rishabh
38533b2f09
AP_Motors: Added DJI_X motor setup for hexacopter and octacopter
2020-01-29 16:57:23 +09:00
Peter Hall
d08b395224
AP_Motors: only ouput throttle to mask if armed
2020-01-21 10:11:16 +11:00
Andrew Tridgell
134d8b941b
AP_Motors: added betaflight-x-reversed frame type
2020-01-16 19:13:13 +11:00
Peter Hall
af08379d1b
AP_Motors: MatrixTS remove output_to_motors
2020-01-07 10:40:22 +11:00
Peter Hall
615695c1bc
AP_Motors: MatrixTS: defualt to normal Matrix setup
2020-01-07 10:40:22 +11:00
Peter Hall
4aa0dfa2aa
AP_Motors: output_motor_mask update
2020-01-07 10:40:22 +11:00
Mark Whitehorn
68dcab3edb
AP_Motors: add copter tailsitter differential torque frames
2019-12-18 08:33:29 +11:00