dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
31,143 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

153 Commits

Author SHA1 Message Date
Daniel Agar ace1acca3c Jenkins hardware print power topics 2020-01-07 16:10:46 -05:00
Daniel Agar 7166b867e1
NuttX stackcheck exclude PX4 Matrix and Param 
- instrumenting PX4 Matrix and Param methods is too burdensome
 - partially restore px4_fmu-v5_stackcheck and holybro_durandal-v1_stackcheck to match default configs
 2020-01-06 18:15:55 -05:00
Daniel Agar 44f9de5e37
delete parrot bebop board support 
This target was never fully supported and is heavily dependent on a number of DriverFramework drivers that have no in tree equivalents (bebop bus, flow, rangefinder, etc). Deleting this will make it easier to fully drop DriverFramework shortly.
 2020-01-05 19:46:51 -05:00
Daniel Agar 7241eebd80
cmake merge linux cross compile targets (cross + native) and cleanup 
- consolidate cross and native variants (only a single default is needed)
   - beaglebone_blue_cross + beaglebone_blue_native => beaglebone_blue_default
   - emlid_navio2_cross + emlid_navio2_native => emlid_navio2_default
   - px4_raspberrypi_cross + px4_raspberrypi_native => px4_raspberrypi_default
 - move upload helpers to cmake/upload.cmake
 2020-01-05 14:03:57 -05:00
Daniel Agar cc7a0cd69d beaglebone blue: build librobotcontrol with cmake 2019-12-29 17:32:06 -05:00
Daniel Agar 89e1f478ac PX4Accelerometer and PX4Gyroscope add vibration metrics and always publish status 2019-12-27 20:54:50 -05:00
Daniel Agar 2b792c0225 px4_raspberrypi cleanup configs and add to Jenkins 2019-12-10 11:10:24 -05:00
Daniel Agar 0a59d8a36d Jenkins hardware leave RGB LED defaults 2019-12-07 20:48:10 -05:00
Daniel Agar 5af8286739 Jenkins hardware board cleanup/reset at end of test 2019-12-04 00:43:44 -05:00
Daniel Agar 4a75840b33 Jenkins temporarily disable fmu-v5x (obsolete prototype on test rack) 2019-12-03 17:43:55 -05:00
Daniel Agar 0420a4386d deprecate px4 esc-v1 and drivers/uavcanesc 2019-11-30 14:55:01 -05:00
Daniel Agar 5200cae3a3 deprecate thiemar s2740vc-v1 board support 2019-11-30 14:55:01 -05:00
Daniel Agar 60f9e9410b Jenkins: compile px4_io-v2_default directly and archive 2019-11-29 22:32:43 -05:00
Daniel Agar e1af47f4ca
Jenkins ccache don't reset previous statistics (only print) 2019-11-28 18:37:20 -05:00
Daniel Agar f8c45c4914 Jenkins hardware add modalai_fc-v1 and refactor 2019-11-27 16:24:45 -05:00
Daniel Agar a7fbaefd83 NuttX cmake small debug helper improvements 2019-11-26 15:39:02 -05:00
Daniel Agar dbed772316 Jenkins hardware select quadcopter airframe for holybro_durandal-v1_stackcheck 2019-11-23 17:23:30 -05:00
Daniel Agar 8c38176d77 boards: alphabetize and sync common drivers and modules 2019-11-21 18:56:24 -05:00
Daniel Agar b5e7e4bc17 add holybro_durandal_stackcheck build and run on Jenkins 2019-11-16 11:43:42 +01:00
Daniel Agar caca3e93e7 Jenkins hardware add holybro_durandal-v1 2019-11-16 11:43:42 +01:00
David Sidrane b2f28c977d durandal-v1 Nuttx Based PX4 bootloader 
durandal bootloader:Run at 480 Mhz

durandal-v1:bootloader use VBUS detection

Add Durandal bootloader to build
 2019-11-16 11:43:42 +01:00
David Sidrane 4836fc0719 Added board support for holybro_durandal-v1 
Durandal:Fix PLL settings

durandal-v1:Move I2C123, I2C4 to HSI.

   Not liking using HSI but, F7 has, and in reality there is no
  requerment for accuracy.

durandal-v1:board config set 400kHz on card probe

durandal-v1:Board SDMMC Clock Not greater then 25 mHz

durandal-v1:Fix PLL3 configuration typo and value

CI build config for holybro_durandal-v1

durandal-v1:Kconfig - add knob to ensure ARCH_MATH_H is kept

   Upstream changes added ARCH_HAVE_MATH_H to protect from archs
   without math.h from causing isses for users setting
   CONFIG_ARCH_MATH_H and getting errors. PX4 provides a math.h
   and we need CONFIG_ARCH_MATH_H set. So this Selects
   ARCH_HAVE_MATH_H perserving CONFIG_ARCH_MATH_H a defconfig

Track master LED removal

durandal-v1: bmi055 -> bmi088

bmi088 is what the board uses

durandal-v1:add PX4IO support

durandal-v1 rc.board_sensors: start baro

durandal-v1: remove segway module

durandal:Run at 480 Mhz

durandal-v1: build thermal control module

durandal-v1: enable IMU thermal control by default

durandal-v1:Track upstream adc start moved to rc.board_sensors

durandal-v1:Track upstream mavlink start moved to rc.board_mavlink
 2019-11-16 11:43:42 +01:00
Daniel Agar 7fe257c0c0 Jenkins SITL tests always upload to logs.px4.io 2019-11-07 08:55:51 -05:00
Daniel Agar d263811eef Jenkins move raspi and bebop builds to regular armhf toolchain 2019-11-05 15:56:24 -05:00
Daniel Agar 7f930f875e Jenkins store SITL unit test results 2019-11-04 14:04:40 -05:00
Daniel Agar 64daa96d11
Jenkins hardware move to nested stages 2019-11-03 16:31:43 -05:00
Daniel Agar 7b94c501cd
Jenkins discard artifacts sooner 2019-10-27 12:52:28 -04:00
TSC21 45c320ba8e bump container tags to 2019-10-24 2019-10-24 11:23:24 +01:00
TSC21 5b018ebc83 Jenkins CI: Tests: bump px4-dev-ros-melodic tag to 2019-10-23 2019-10-24 11:23:24 +01:00
TSC21 6fbc8afd50 Jenkins CI: move SITL tests to Melodic container 2019-10-24 11:23:24 +01:00
Daniel Agar f7e62349b3 px4_posix: increase posix stack overhead (mostly for ASan) 
- sync address sanitizer SITL tests
 2019-10-21 16:56:09 -04:00
modaltb 3bbf1cc868 Add support for ModalAI FC1 2019-10-19 12:23:23 -04:00
Martina Rivizzigno 123f769306 enable safe landing test 2019-10-14 10:53:13 -04:00
Martina Rivizzigno 7f4ddde378 enable avoidance test 2019-10-14 10:53:13 -04:00
Nuno Marques 5a8aa04970 CI: bump container tags to 2019-10-04 (#13095) 
* bump container tags to 2019-10-04

* docker_run: update container name and tag

* generate_microRTPS_bridge.py: force FastRTPSGen to version 1.0 if the result of 'fastrtpsgen -version' command is not a number

* CI: temporarly disable avoidance and safe landing tests

* CI: try to revive tiltrotor test
 2019-10-06 01:21:04 -04:00
Daniel Agar 26364d44c9
px4_work_queue: command line status output and shutdown empty queues 
* adds a work_queue systemcmd that will bring a tree view of all active work queues and work items
 * WorkQueues now track attached WorkItems and will shutdown when the last WorkItem is detached
 2019-10-02 12:23:17 -04:00
Daniel Agar 0af942ce12 Jenkins hardware skip sd_bench on px4_fmu-v5_stackcheck 2019-09-29 20:29:34 -04:00
Daniel Agar 5507f14bb2 Jenkins HIL disable rgbled 2019-09-15 17:17:09 -04:00
Daniel Agar 82bcfcb710 boards/px4/fmu-v5x remove alternate configs until default is complete 2019-09-01 18:48:55 -04:00
Daniel Agar 2fa3ee9336
Jenkins hardware add Modal AI v5m/v5x 2019-08-30 00:40:22 -04:00
Daniel Agar 2bb00e1f28
Jenkins snapdragon always pass sanity check for now 2019-08-28 21:49:40 -04:00
Hyon Lim 0262a699c1 UVify Core board support and airframes (Draco, Draco-R, IFO) (#12337) 
* also includes minor changes to make it easy to keep in sync with px4_fmu-v4
 2019-08-23 17:02:25 -04:00
Daniel Agar 3c0f4f9ace
Jenkins hardware snapdragon build with CCACHE_BASEDIR and dump logs 2019-08-22 16:20:39 -04:00
Daniel Agar 331b533b3d
Jenkins hardware linux add CCACHE_BASEDIR for rpi build 2019-08-22 15:46:39 -04:00
Daniel Agar e7e477962c
snapdragon fix sanity test and add to Jenkins hardware 2019-08-22 15:11:32 -04:00
Daniel Agar b45f459ef1
Jenkins add linux (raspberry pi) build and test 2019-08-22 15:09:04 -04:00
Daniel Agar 24764c676e Jenkins hardware run logger and attempt to stop modules 2019-08-17 13:43:10 -04:00
Daniel Agar 67644e29b7 Jenkins hardware print AUX pwm info 2019-08-17 13:43:10 -04:00
Daniel Agar b9fc3ed2ab Jenkins hardware select airframe 4001 on fmu-v4 2019-08-17 13:43:10 -04:00
Daniel Agar 17c46623f9 Jenkins hardware default airframe 4001 -> 13000 (run all controllers) 2019-08-17 11:03:26 -04:00