dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
41,993 Commits 514 Branches 136 Tags 601 MiB
Commit Graph

41993 Commits

Author SHA1 Message Date
Daniel Agar 97c8a60d67 SITL gz make airframes simulator specific 2023-01-07 17:00:35 -05:00
Daniel Agar ae4cb24100 SITL flightgear make airframes simulator specific 2023-01-07 17:00:35 -05:00
Daniel Agar 1abe35c220 SITL jsbsim make airframes simulator specific 2023-01-07 17:00:35 -05:00
Daniel Agar 75125da34c SITL sihsim make airframes simulator specific 2023-01-07 17:00:35 -05:00
Daniel Agar 95a6eba36c SITL jmavsim make airframes simulator specific 
-cleanup and simplify jmavsim SITL launch and debug
 2023-01-07 17:00:35 -05:00
Daniel Agar 760fff7d89 Kconfig: fix missing SERIAL_EXT2 (fmu-v5x/v6x) 2023-01-07 12:10:52 -05:00
Daniel Agar dc5ce9b0ce
boards: NuttX increase default CONFIG_ARCH_INTERRUPTSTACK 512->768 bytes 
- during casual testing on default configs the stack was penetration was reaching ~90% which is a bit too close for comfort
 - increasing by 50% to be conservative
 2023-01-07 12:07:35 -05:00
Daniel Agar 7f7dfea998
drivers/imu/analog_devices: experimental support for new ADIS16507 IMU (untested) 2023-01-07 10:56:30 -05:00
Daniel Agar f520d4b3be
Update submodule mavlink to latest Sat Jan 7 12:38:21 UTC 2023 
- mavlink in PX4/Firmware (8bc88ed526044a864427a4b65135c3baffabb2ef): 0c7792edfe
    - mavlink current upstream: 74dee05f0c
    - Changes: 0c7792edfe...74dee05f0c

74dee05f 2023-01-04 Beat Küng - component_metadata: add translation schema (#1934)
0267c4cf 2023-01-04 Bob Long - common.xml: add fuel_pressure ext. to EFI_STATUS (#1938)
c64818e8 2023-01-04 Mathieu Mirmont - common.xml: fix typos in AIS_TYPE enumerate (#1939)
2306bf79 2023-01-04 Hamish Willee - Update pymavlink (#1940)
0077129b 2022-10-06 Peter Hall - Development: update airspeed message
fbf84c64 2022-10-05 Peter Hall - gitignore: add /.vscode
817c44d8 2022-12-15 Mathieu Mirmont - Add the MAV_TYPE_VTOL_TILTWING aircraft type (#1933)

Co-authored-by: PX4 BuildBot <bot@px4.io>
 2023-01-07 10:55:05 -05:00
Julian Oes 243caac44a mavlink: filter command_acks by target 
When we receive a command_long or command_int message to
answer, it arrives with a source sysid/compid, so this means we can send
the command_ack back on the appropriate MAVLink instances instead of all
of them.

This commit filters outgoing command_ack messages, so they are only sent
on the MAVLink instances where the sysid/compid has been seen in the
past.

This means that a command_ack is likely still sent on multiple links for
a setup with redundant links.

This should also prevent command_acks from being blasted on Iridium links
when it's not required.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-01-07 10:39:08 -05:00
Matthias Grob 19cee04f3a ubuntu.sh: always install "Gazebo" next to "Gazebo classic" on 22.04 2023-01-07 10:37:02 -05:00
Marcin 91e97eded9 setup ubuntu.sh; fix legacy gazebo for ubuntu22.04 2023-01-07 10:37:02 -05:00
murata,katsutoshi d821404e4f
commander: failsafe define enums for actions (#20880) 2023-01-07 10:10:57 -05:00
bresch 49f8bcfc69 ekf2: purge old ekf2 derivation 2023-01-06 18:35:19 -05:00
Peter van der Perk d1b95a21e4 Fixes MR-CANHUBK3 FMU build and adds it to the CI targets 2023-01-06 18:02:45 -05:00
Hamish Willee 1551e2f15c MIS_TKO_LAND_REQ - improve English for value 4 2023-01-06 09:43:16 +01:00
Julian Oes 7e3dcd7be4 sensors: fix overlapping ifdef 
This fixes the case where vehicle_angular_rate is no longer started when
airspeed is not enabled.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-01-05 21:09:14 -05:00
bresch 26122886ae ekf2: drag fusion - improve parameter description 
The user should refer to the online documentation for tuning guidelines
and not the parameter description.
 2023-01-05 12:03:24 -05:00
bresch 06ef39d05e ekf2: MC drag fusion - interpolate between X an Y "b" coefficients 
Use the current sideslip angle to generate a drag coefficient that is a
mixture of X and Y coefficients, creating an elliptic distribution.
 2023-01-05 12:03:24 -05:00
bresch 420f5ef2b7 ekf2: migrate drag fusion derivation to SymForce 2023-01-05 12:03:24 -05:00
bresch 04f76c932e ekf2: decompose drag vector into x-y components 
The drag force is a vector.
drag_x = drag.norm() * vx / v.norm()
 2023-01-05 12:03:24 -05:00
Paul Riseborough 1a9c358858 ekf2: Add unit tests for drag fusion 2023-01-05 12:03:24 -05:00
bresch 0509f612dd ekf2: fix drag data downsampling 
setDragData needs the imu data at full speed to downsample it without
skipping samples.
 2023-01-05 12:03:24 -05:00
Daniel Agar 34c57cc5b5 px4-rc.simulator shellcheck fixes 2023-01-04 17:35:41 -05:00
bresch 14bf04b9a4 SIH: add to px4_fmu-v5_default and auto start GPS sim driver 
- add simulator kconfig dependencies
 - exclude SIH (+deps) where sufficient flash isn't available
 2023-01-04 16:26:15 -05:00
Peter van der Perk fa87375d0c Add hardfault log progmem flash backend 2023-01-04 12:52:01 -05:00
Daniel Agar ca9ae80b10
px4-rc.simulator support launching new Gazebo Garden vs Fortress (#20864) 
- "ign gazebo" command is now "gz sim" as of Gazebo Garden
 2023-01-04 12:39:06 -05:00
JaeyoungLim 21e88f64b4
Add new fixed wing rate control module (fw_rate_control) 
* Fixedwing rate control into a separate module
* Start fw_rate_control for vtol
* Move over airspeed related parameters to fw_rate_control

Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
 2023-01-04 11:14:00 -05:00
Peter van der Perk 4c2c06060d PX4Board kconfig add dependency chain for QURT & POSIX modules 2023-01-04 09:40:17 -05:00
Peter van der Perk ddaa3c24eb Fix MR-CANHUBK3 2023-01-04 05:52:58 -05:00
frederictaillandier 315c075e5c updating the sitl-gazebo-sniffer to allow a vehicle name in the serialized object 2023-01-03 17:00:48 +01:00
bresch 28d664aed5 EKF2: purge outdated matlab scripts 
Those files are no longer maintained and will just confuse new users
 2022-12-30 13:01:58 -05:00
Daniel Agar cc1b043e18 cmake/kconfig.cmake: fix whitespace 2022-12-30 13:01:30 -05:00
dagar 618ce9a865 [AUTO COMMIT] update change indication 2022-12-29 16:37:34 -05:00
Daniel Agar 20a1c73cf0 ekf2: reinit baro height on sensor or calibration change 
- handle reset on delayed time horizon
 2022-12-29 16:37:34 -05:00
Silvan Fuhrer 0e2df5a152 remove drivers/pca9685 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2022-12-29 12:57:41 -05:00
Silvan Fuhrer 348dcf11c8 remove examples/hwtest 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2022-12-29 12:57:11 -05:00
bresch 3e4e5c991c ekf2: add mag unit tests 2022-12-29 12:56:36 -05:00
bresch 657bd6cf72 ekf2: stop mag fusion when inhibited for too long 
Also do not try to run anything if mag is inhibited
 2022-12-29 12:56:36 -05:00
bresch c75a9058a5 EKF2: only fuse zero innovation if yaw var is large 2022-12-29 12:56:36 -05:00
Daniel Agar 40e3503c39 boards: fix all NuttX configs (CONFIG_SMALL NuttX upgrade migration) 2022-12-29 12:50:37 -05:00
Daniel Agar 0fbb6db6d4 boards: update all NuttX defconfig (make all_olddefconfig) 2022-12-29 12:50:37 -05:00
Daniel Agar c2f15f5957 boards: update all px4boards (make all_px4_savedefconfig) 2022-12-29 12:50:37 -05:00
Daniel Agar 0204a55354 Makefile: add all_olddefconfig and all_px4_savedefconfig helpers for updating all boards 2022-12-29 12:50:37 -05:00
Daniel Agar f37eb55e19 platforms/nuttx: FATAL error if NSH enabled and SET disabled 2022-12-29 12:50:37 -05:00
Peter van der Perk 964e9dd8c4 Fix MRO NuttX defconfig 2022-12-28 17:00:58 -05:00
Peter van der Perk f7c183edd3 Update NuttX kernel for K3 changes 2022-12-28 10:21:58 -05:00
Peter van der Perk 5e3165af70 S32K3 Enable dflash progmem 2022-12-28 10:21:58 -05:00
Peter van der Perk 2fde13c07d S32K3 EMAC TJA1103 Support 2022-12-28 10:21:58 -05:00
Peter van der Perk 2f1a165d85 S32K3 Enable IRQ stack 2022-12-28 10:21:58 -05:00