To pass from invalid to valid:
- time hysteresis
- some vertical velocity
- test ratio < 1
- low-passed signed test ratio < 1
To pass from valid to invalid:
- low-passed signed test ratio >= 1
At each new valid range measurement, the time derivative of the distance
to the ground is computed and compared with the estimated velocity.
The average of a normalized innovation squared statistic check is used
to detect a bias in the derivative of distance measurement,
indicating that the distance measurements are kinematically inconsistent
with the filter.
- mavlink in PX4/Firmware (a1530591764f0c694560e4bb6ae41c15d3e35c9b): 0133e5db7f
- mavlink current upstream: 56a5110d38
- Changes: 0133e5db7f...56a5110d38
56a5110d 2022-04-09 Tom Pittenger - Add radius to DO_REPOSITION (#1825)
3b5959bd 2022-04-07 Thomas Debrunner - Option to not reset non-configurable params in preflight storage (#1826)
For many VTOLs/fixed-wing drones a 50m loiter radius is too tight, and
going to 80m is a better and safer default.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
- In this case, no action is configured for datalink lost. Action is configured for RC lost.
- In case of no data link and no rc failsafe is enabled but reporting a "no_datalink" reason but "no_rc_and_no_datalink" seems more explicit.
- previously an invalid decode would continue to be transferred to the FMU (at 50 Hz) and published to the rest of the system as successfully decoded new RC data
- by only publishing new successful decodes we can more effectively discard invalid data in downstream consumers
PX4 supports int32 parameter types by interpreting the 32 bits in
the float field as an int32 field. To signal this behaviour, it should
set the bit which is described as PARAM_ENCODE_BYTEWISE.
PX4 had always handled parameters this way but never actually sent the
capability (which back then was called PARAM_UNION), however, it should
have. This came up recently in the MAVLink devcall when these flags were
discussed. The takeaway was to remove the flags to make it clearer and
to make sure the projects (like PX4) send them out correctly.
mathlib: add second order reference model filter with optional rate feedback (#19246)
Reference models can be used as filters which exhibit a particular, chosen (reference) dynamic behavior. This PR implements a simple second order transfer function which can be used as such a reference model, additionally with rate feedback. The system is parameterized by explicitly set natural frequency and damping ratio. Another nice externality is that the output state and rate are kinematically consistent. Forward-euler and bilinear transform discretizations for the state space integration step are available.
bresch
Matthias Grob
RomanBapst
Junwoo Hwang
alexklimaj
Daniel Agar
PX4 BuildBot
Silvan Fuhrer
Nicolas MARTIN
Ryan Johnston
Jacob Dahl
Ramon Roche
Julian Oes
Thomas Stastny
Igor Misic
Alessandro Simovic
Hovergames