Commit Graph

61 Commits

Author SHA1 Message Date
SalimTerryLi 1ee98417f8
scumaker pilotpi updates
* replace default mag with qmc5883l
* fix rotation and quiet startup
* fixedwing script & Multi-EKF cfg
* set default params only when initial startup
2021-01-14 09:16:13 -05:00
Daniel Agar 763c3b8fda boards: start enabling multi-EKF by default on F7/H7 2021-01-10 17:56:34 +01:00
Matthias Grob 7545249215 Add flight_mode_manager to all targets with mc_pos_control 2020-12-30 10:25:08 -05:00
SalimTerryLi 6728a3a05a
boards: rename AirPi2 to PilotPi, add arm64 support, add to CI
* rename all
* add arm64 support
* change internal ist8310 onto I2C-1
2020-11-10 11:04:47 -05:00
blazczak 57da61dc17
posix-configs/rpi: Fix mavlink over UART (/dev/ttyAMA0)
UART is the primary interface for telemetry radio: https://docs.emlid.com/navio2/ardupilot/hardware-setup/#uart-radio

Check first if /dev/ttyUSB0 exists (https://docs.emlid.com/navio2/ardupilot/hardware-setup/#usb-radio); if not, fall back to configuring over UART (/dev/ttyAMA0).

Use stricter check for character special file (-c) rather than just file (-f).

'console=serial0,115200' needs to be removed from /cmdline.txt as additional configuration step. This should be documented in the Navio2 section of docs.px4.io. Presumably, this is already performed as part of the Raspberry Pi OS prebuilt image Emlid spins.
2020-10-03 10:51:27 -04:00
SalimTerryLi 25eca31e3a
New board Scumaker AirPi HAT for Raspberry Pi B series 2020-10-01 11:22:47 -04:00
Beat Küng 055fa768d8 posix: enable ROMFSROOT
This will copy the ROMFS into the build directory under etc/, and thus
needs a change of the PX4 startup parameters and mixer paths.
2020-09-15 09:30:16 +02:00
SalimTerryLi c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc 2020-09-07 23:09:20 -04:00
SalimTerryLi 49e83b6ae4
load_mon: add linux support 2020-08-11 18:33:44 -04:00
Daniel Agar 34864cc704 github actions build and run emlid navio2 on hardware 2020-06-20 19:03:15 -04:00
Daniel Agar 04113b4d57 commander: changes when USB connected
- skip avionics rail voltage check when USB connected
 - skip forced reboot on USB disconnect if circuit breaker set
 - avionics voltage preflight check don't silently fail if system_power unavailble
     - explicitly set supply check circuit breaker (CBRK_SUPPLY_CHK)
2020-05-06 13:53:54 -04:00
Daniel Agar 7aa7f0ed95 switch remaining boards to new InvenSense IMU drivers 2020-04-07 09:59:12 -04:00
Beat Küng 7626be0485 refactor mpu9250: use driver base class 2020-03-24 09:46:20 -04:00
SalimTerryLi dc8e775d8f
ADC: replace ioctl with uorb message (#14087) 2020-03-20 11:23:32 +01:00
Beat Küng 3b7b2dc871 differential_pressure sensors: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng dbb53044ce refactor ms5611: use driver base class
Also: remove device type auto-detection as it will not work with
together with the new SPI board config (which specifies a specific
device type)
2020-03-17 23:31:17 -04:00
Beat Küng 3e71914fae refactor lsm9ds1+lsm9ds1_mag: use driver base class 2020-03-17 23:31:17 -04:00
Daniel Agar f9794e99f8
move hover_thrust_estimator to new module (mc_hover_thrust_estimator)
* MC_HTE: unitialize with hover_thrust parameter
* MC_HTE: constrain hover thrust setter between 0.1 and 0.9
* MC_HTE: integrate with land detector and velocity controller
* MCHoverThrustEstimator: Always publish an estimate even when not fusing measurements. This is required as the land detector and the position controller need to receive a hover thrust value.

* MC_HTE: use altitude agl threshold to start the estimator
local_position.z is relative to the origin of the EKF while dist_bottom
is above ground

Co-authored-by: bresch <brescianimathieu@gmail.com>
2020-03-11 21:20:54 -04:00
Daniel Agar de4f594937 DriverFramework purge
The bulk of this change was tightly coupled and needed to be deleted in one pass. Some of the smaller changes were things that broke as a result of the initial purge and subsequently fixed by further eradicating unnecessary platform differences. Finally, I deleted any dead code I came across in the related files I touched while going through everything.

 - DriverFramework (src/lib/DriverFramework submodule) completely removed
 - added dspal submodule in qurt platform (was brought in via DriverFramework)
 - all df wrapper drivers removed
 - all boards using df wrapper drivers updated to use in tree equivalents
 - unused empty arch/board.h on posix and qurt removed
 - unused IOCTLs removed (pub block, priv, etc)
 - Integrator delete methods only used from df wrapper drivers
 - commander: sensor calibration use "NuttX version" everywhere for now
 - sensors: update to px4_{open, read, close} instead of DevMgr wrapper (adc open for analog differential pressure)
 - battery_status: update to px4_{open, read, close} instead of DevMgr wrapper (adc open for analog differential pressure)
 - cdev cleanup conflicting typedefs and names with actual OS (pollevent_t, etc)
 - load_mon and top remove from linux boards (unused)
 - delete unused PX4_MAIN_FUNCTION
 - delete unused getreg32 macro
 - delete unused SIOCDEVPRIVATE define
 - named each platform tasks consistently
 - posix list_devices and list_topics removed (list_files now shows all virtual files)
2020-01-13 14:07:03 -05:00
Daniel Agar 298d6d8703 ST LSM9DS1 9DOF IMU driver
- this is a replacement for df_lsm9ds1_wrapper on the Emlid Navio2 once DriverFramework is removed
2020-01-07 21:58:31 -05:00
Daniel Agar d19f18d40b linux boards (ocpoc, bbblue, navio2) replace custom adc drivers with simple px4_arch implementation 2020-01-07 14:04:13 -05:00
Daniel Agar ce1e9762b0 deprecate df_hmc5883_wrapper and replace with in tree hmc5883
- deprecate DriverFramework hmc5883 driver (df_hmc5883_wrapper)
 - update aerotenna ocpoc and snapdragon flight eagle boards to use in tree hmc5883
2020-01-05 15:17:26 -05:00
Daniel Agar 213c6a1923 deprecate df_ms5611_wrapper and df_ms5607_wrapper (replaced with in tree ms5611 driver) 2019-12-31 10:37:29 -05:00
Daniel Agar bc182e94e6
sensors split rc_update into new standalone module 2019-11-24 13:25:11 -05:00
Daniel Agar 84fe64b1c2
create new multicopter rate controller module (mc_rate_control) split out of mc_att_control 2019-11-19 17:03:11 -05:00
Daniel Agar 26364d44c9
px4_work_queue: command line status output and shutdown empty queues
* adds a work_queue systemcmd that will bring a tree view of all active work queues and work items
 * WorkQueues now track attached WorkItems and will shutdown when the last WorkItem is detached
2019-10-02 12:23:17 -04:00
Daniel Agar 3c0f4f9ace
Jenkins hardware snapdragon build with CCACHE_BASEDIR and dump logs 2019-08-22 16:20:39 -04:00
Daniel Agar 331b533b3d
Jenkins hardware linux add CCACHE_BASEDIR for rpi build 2019-08-22 15:46:39 -04:00
Daniel Agar b45f459ef1
Jenkins add linux (raspberry pi) build and test 2019-08-22 15:09:04 -04:00
Daniel Agar f032d0d9fc
SYS_MC_EST_GROUP mark LPE unsupported and update airframes (#11925) 2019-04-29 11:50:36 -04:00
Daniel Agar 739a02022b position_estimator_inav: move to examples (start deprecation) 2019-01-27 22:15:39 +01:00
Beat Küng 719bfd1073 posix-configs: use '.' instead of 'source'
'source' is not POSIX
2018-09-27 23:39:20 +02:00
Daniel Agar 72792cef43
posix-configs shell scripts use /bin/sh to maximize compatibility (#10292)
- fix ocpoc line endings
2018-08-25 11:02:37 -04:00
Beat Küng d90ac975a7 posix shell: required updates for RPi, bepob, ocpoc, eagle & exxcelsior
- RPi works
- the rest is not tested, and requires a bit more
  (such as uploading the bin/ directory)
2018-08-08 21:09:39 +02:00
Daniel Agar 38f5f60a1e pwm_out_sim cleanup
- move to ModuleBase
 - strip down to PWM 8 and 16 modes only
 - remove all dead code
 - implement missing pwm ioctls (current value, rates, etc)
 - default rate 50Hz -> 400Hz
2018-03-04 14:12:15 -05:00
Beat Küng ebd2acfc43 posix-configs: enable ftp for all mavlink instances 2017-09-21 07:33:09 +02:00
Daniel Agar 07619cf723 Make NuttX drivers cross platform (VDev -> CDev) 2017-08-31 09:27:36 +02:00
Beat Küng 8527c8276f drivers: rename rpi_pwm_out to linux_pwm_out 2017-07-13 16:53:28 +02:00
Beat Küng d3f76262da RPI px4_no_shield.config: add documentation for connected HW 2017-07-13 16:53:28 +02:00
Beat Küng 243ae00e4e rpi_pca9685_pwm_out: remove this driver, it's now in rpi_pwm_out 2017-07-13 16:53:28 +02:00
Beat Küng 723f67b39a refactor navio_sysfs_pwm_out: rename to rpi_pwm_out 2017-07-13 16:53:28 +02:00
crossa 0340f96ad0 Rename px4_rpi.config to px4_no_shield.config 2017-07-13 16:53:28 +02:00
crossa 6a9aa60ad7 Add rpi_pca9685_pwm_out command 2017-07-13 16:53:28 +02:00
crossa 78b853431d change gps command 2017-07-13 16:53:28 +02:00
crossa 6ee6165592 PX4 RASPBERRY PI CONFIG 2017-07-13 16:53:28 +02:00
Nicolae Rosia 5467beed93 posix-configs rpi: add default values for Navio2 Power Module
Signed-off-by: Nicolae Rosia <nicolae.rosia@gmail.com>
2017-05-14 17:51:02 +02:00
Nicolae Rosia 32498009a3 navio_adc: add driver for Navio2 ADC
Signed-off-by: Nicolae Rosia <nicolae.rosia@gmail.com>
2017-05-14 17:51:02 +02:00
Beat Küng 061bff14c8 rpi startup configs: set logger buffer size to 200
Avoid dropouts, we have enough RAM there.
2017-04-24 10:12:23 +02:00
Beat Küng df791cef94 RPi: make sure navio_rgbled works and add it to autostart 2017-03-12 00:08:35 +01:00
Beat Küng 828bb983e8 rpi startup scripts: start dataman so that missions can be flown 2017-03-10 09:00:24 +01:00