Commit Graph

219 Commits

Author SHA1 Message Date
Samuel Tabor 589382cbb4 Plane: Add THERMAL mode to Parameters.cpp metadata. 2020-09-25 11:34:48 -07:00
Samuel Tabor 10111f92d5 Plane: Rename SOARING_ENABLED to HAL_SOARING_ENABLED and don't compare to ENABLED. 2020-09-24 07:30:48 +10:00
Peter Barker 15372e9213 ArduPlane: replace '@User: User' with '@User: Standard' 2020-09-22 14:56:04 +10:00
Andy Piper c057be8ed1 Plane: conditionally compile ADSB support 2020-09-22 09:33:51 +10:00
Tom Pittenger db10ad2e54 Plane: update USE_REV_THR param description to include landing pattern 2020-09-17 07:31:43 -07:00
Hwurzburg 96f5e2a20a Plane: Update THR_FAILSAFE param metadata 2020-09-04 07:08:03 +10:00
Siddharth Purohit fb180fa431 Plane: move to using CANManager library 2020-08-19 17:31:09 +10:00
Andrew Tridgell 3c705d1c60 Plane: added THR_FAILSAFE=2 option
this allows for RC inputs to be ignored at low throttle, but won't
trigger failsafe. It is meant for users flying BVLOS missions, where
they want GCS failsafe enabled, but don't want RC failsafe, and want
to be sure that RC inputs will be ignored at low RC throttle values

Thanks to suggestion from Pompecukor
2020-08-07 14:01:20 +10:00
Andy Piper b649afe9e5 Plane: make mount/gimbal inclusion configurable per-board 2020-08-04 09:18:14 +10:00
Samuel Tabor 419f7c9998 Plane: Convert SOAR_ENABLE_CH to RCX_OPTION. 2020-07-21 09:38:04 +10:00
Paul Riseborough 97d7d563c4 ArduPlane: Improve parameter description for FWD_BAT_VOLT_MAX/MIN 2020-06-16 10:17:33 +10:00
vierfuffzig 147ebb74f4 Plane Parameters: fix THR_MAX param description
makes clear that thr is constrained in stabilized modes too unless passthrough is set, aligns with THR_MIN description.
2020-06-12 10:23:41 +10:00
Buzz 0f5177b291 Plane: Support a set of offboard MAVLink guided controls with rates
+ 3 rounds of fixes
2020-05-20 15:03:21 +10:00
Andrew Tridgell 8b21f5117a Plane: implement RTL_CLIMB_MIN parameter
this allows for an initial climb on RTL where roll is limited to
LEVEL_ROLL_LIMIT
2020-05-18 13:04:04 +10:00
Paul Riseborough 40cc5a5006 ArduPlane: Improve EKF failsafe in VTOL modes
Replicates Copter behaviour with a three step process if the EKF sustains a loss of navigation as detected by high GPS innovation test ratios:

1) Attempts a yaw reset using the GSF estimate if available
2) Attempts a lane switch
3) Falls back to a non-position mode
2020-05-14 10:40:48 +10:00
Peter Barker 8222b5db62 Plane: AP_Soaring no longer takes AHRS in constructor 2020-05-05 17:35:14 +10:00
Iampete1 3ded030fa8 Plane: compensate forward throttle for battery voltage drop 2020-05-05 09:46:41 +10:00
Michael du Breuil 37be15b3cd Plane: When stick mixing is disabled do not apply stick mixing to quadplane modes 2020-04-04 10:12:22 +11:00
Rishabh 30fd915312 Plane: Update CRASH_DETECT param 2020-02-25 11:02:43 +11:00
Peter Barker 19bc60b690 Plane: correct missing EFI parameter docs 2020-02-18 13:28:03 +11:00
Peter Barker e358677f85 Plane: allow NavEKFs to be compiled out 2020-01-21 11:53:18 +11:00
Peter Barker 9364181772 Plane: EKF objects have moved into AP_AHRS_NavEKF 2020-01-21 11:53:18 +11:00
Andrew Tridgell a90c16e60e Plane: update for new SRV_Channels parameter conversion call 2020-01-14 14:23:11 +11:00
Henry Wurzburg 040a1b7fbe Plane:fix typo in ARSPD_FBW_MAX param description 2020-01-02 12:00:52 -07:00
Peter Hall 660c9a8a60 Plane: move from FLAP_IN_CHANNEL to RCx_Option 2020-01-01 08:11:01 +11:00
Andy Piper eca398e7a2 Plane: create generic vehicle management and move runcam to it 2019-12-30 13:02:04 +11:00
Peter Barker 33a0e55b32 Plane: correct duplicate button instance 2019-12-10 09:29:52 +09:00
Henry Wurzburg f2d8a42de8 Plane: correct crash_detect param description...no manual mode option bit exists 2019-11-23 17:39:06 -08:00
Andrew Tridgell 2b27cd2ce9 Plane: Add EFI Support 2019-11-17 20:10:54 +11:00
Peter Barker 2a22e7c8c5 Plane: adjust for renaming of RangeFinder files 2019-11-12 07:14:37 +08:00
Andrew Tridgell ff400243e0 Plane: added a new TAKEOFF flight mode
takeoff then circle in direction of takeoff
2019-10-17 12:19:43 +11:00
Henry Wurzburg 3e08e18202 Plane: add QACRO to flight mode list 2019-10-16 13:14:06 +11:00
Peter Barker 7e5a6f1895 Plane: avoid allocate a GCS_MAVLINK per mavlink channel 2019-08-14 18:25:43 +10:00
Michael du Breuil 2d81ad63f5 Plane: Convert ARMING_CHECK 2019-07-30 10:42:16 +10:00
Michael du Breuil c6f884221e Plane: Fix parameter description on values to not use the delimiter character 2019-07-23 09:29:48 +10:00
Michael du Breuil 183640789d Plane: Enable scripting parameters 2019-06-18 00:06:32 -07:00
Andrew Tridgell 08baabed4a Plane: modify FENCE_AUTOENABLE docs 2019-06-11 06:58:47 +10:00
Andrew Tridgell 5076058459 Plane: added FENCE_AUTOENABLE=3 option
this enables the fence when arming. If the vehicle is outside the
fence or it can't be enabled then arming fails
2019-06-11 06:58:47 +10:00
IamPete1 fb4b092917 plane: restore thr_min behaviour and update description 2019-04-23 09:39:45 +10:00
Tom Pittenger ade6281923 Plane: use #if ADVANCED_FAILSAFE == ENABLED just like Rover and Copter 2019-04-03 17:46:50 -07:00
IamPete1 520f5f7894 Plane: add crow flap options paramiter 2019-04-04 09:18:11 +11:00
Tom Pittenger 0270c57530 Plane: massive refactor and creation of Mode class 2019-04-02 16:28:52 +11:00
Peter Barker 903be58436 Plane: add param conversion from MAG_ENABLE to COMPASS_ENABLED 2019-04-02 10:24:49 +11:00
Peter Barker 73707077b5 Plane: move enabled parameter into compass library 2019-04-02 10:24:49 +11:00
Tom Pittenger 7030dbc766 Plane: rename dataflash to logger 2019-03-28 16:40:57 +11:00
Andrew Tridgell 3907466f9d Plane: added TKOFF_TIMEOUT parameter
this allows for a timeout on auto-takeoff. This can be combined with
other takeoff parameters to allow the user to abort a hand-launch
after the motor has started without GCS interaction.

The 4m/s threshold is a bit arbitrary. We could make that a parameter
in the future if it is needed
2019-03-18 14:48:08 +11:00
Andrew Tridgell cd1f21b806 Plane: removed some px4 specific code and docs 2019-02-27 20:32:37 +11:00
Tom Pittenger c422a21f55 Plane: ICE to use ahrs singleton 2019-02-05 15:34:08 +11:00
Nathan E 4d7fc66657 Update parameters.cpp per magicrub comments 2019-01-23 09:24:18 -07:00
Nathan E 448d19ddbb Update ArduPlane/Parameters.cpp 2019-01-23 09:24:18 -07:00