Randy Mackay
f00bf77af7
AP_MotorsMulticopter: minor formatting fix
2020-01-30 08:33:00 +09:00
ashvath
d97fdcac31
Copter: function for mot_pwm checks
2020-01-30 08:29:56 +09:00
Rishabh
38533b2f09
AP_Motors: Added DJI_X motor setup for hexacopter and octacopter
2020-01-29 16:57:23 +09:00
Peter Hall
d08b395224
AP_Motors: only ouput throttle to mask if armed
2020-01-21 10:11:16 +11:00
Andrew Tridgell
134d8b941b
AP_Motors: added betaflight-x-reversed frame type
2020-01-16 19:13:13 +11:00
Peter Hall
af08379d1b
AP_Motors: MatrixTS remove output_to_motors
2020-01-07 10:40:22 +11:00
Peter Hall
615695c1bc
AP_Motors: MatrixTS: defualt to normal Matrix setup
2020-01-07 10:40:22 +11:00
Peter Hall
4aa0dfa2aa
AP_Motors: output_motor_mask update
2020-01-07 10:40:22 +11:00
Mark Whitehorn
68dcab3edb
AP_Motors: add copter tailsitter differential torque frames
2019-12-18 08:33:29 +11:00
bnsgeyer
2a8e2d19fa
AP_Motors: Tradheli-incorporate DDFP for counter clockwise rotating rotors
2019-12-16 10:48:09 +09:00
bnsgeyer
e193c45946
AP_Motors: tradheli-update parameter display names
2019-12-10 12:21:56 +09:00
Gone4Dirt
98a4335af4
AP_Motors: Added support for autorotation
2019-11-29 08:06:10 +08:00
Peter Barker
ef6a34a9f0
AP_Motors: use enum-class for SRV_CHANNEL_LIMIT_TRIM and friends
2019-11-26 10:17:17 +11:00
bnsgeyer
05a30c756a
AP_Motors: tradheli- fix metadata
2019-11-20 12:17:36 +08:00
bnsgeyer
417570df70
AP_Motors: tradheli - TAIL_SPEED metadata correction
2019-11-18 08:21:40 +08:00
Leonard Hall
5979c750f9
AP_Motors: yaw headroom fix
2019-10-31 16:12:11 +09:00
Leonard Hall
a8913d0df5
AP_Motors: Add full yaw range calculation back
2019-10-31 11:04:40 +08:00
Leonard Hall
f840f96276
AP_Motors: Freeze motor lost index on enabling thrust boost
2019-10-31 10:49:45 +08:00
Andrew Tridgell
ecd9e45568
AP_Motors: switched tricopter to use rc_write_angle()
...
simplies tricopter handling
2019-10-30 16:01:15 +08:00
Andrew Tridgell
37566d079f
AP_Motors: support direct rate outputs for multicopters
2019-10-25 17:11:56 +11:00
Bill Geyer
63d9b47530
AP_Motors: make init_targets_on_arming global
2019-10-16 08:17:09 +09:00
Michael du Breuil
a80ff80061
AP_Motors: Fix safe disarm
2019-10-16 08:46:49 +11:00
Leonard Hall
6e8413f122
AP_Motors: Use safety timer to enable pwm before spool up
2019-10-16 08:46:49 +11:00
Leonard Hall
d4b922336b
Copter: add voltage compensation to _throttle_thrust_max
2019-10-15 10:45:36 +09:00
Leonard Hall
4a1a5e81ea
AP_Motors: Add variable to record the final thrust value
...
Add Throttle_Out for other frames
2019-10-10 20:26:02 +09:00
murata
371f11b7f4
AP_Motors: Change to description(NFC)
2019-10-08 08:26:17 +09:00
Andrew Tridgell
39182e70e4
AP_Motors: enable docs for hover thr learning in plane
2019-10-04 14:01:08 +10:00
IamPete1
3b9a35da27
AP_Motors: add reversed tricopter option
2019-10-01 09:39:08 +10:00
Willian Galvani
dd97eedde3
APMotors_6DOF: Implement motor_is_enabled(), get_motor_angular_factors() and set_reversed();
2019-09-26 09:39:50 -07:00
Willian Galvani
d56c490b18
AP_Motors_6DOF: Add missing 'break'
2019-09-25 20:17:41 -07:00
bnsgeyer
d4fec221c3
AP_Motor: tradheli align swash params btwn frames and fix metadata
2019-09-25 14:59:02 +09:00
Willian Galvani
5a9e5e937a
APMotors6DOF: add roll factor for motors 4 and 5 for SIMPLEROV_4 and SIMPLEROV_5
2019-09-23 10:41:57 -07:00
Willian Galvani
948a5bf9c3
APMotors6DOF: add case for SIMPLEROV_3
2019-09-23 10:41:57 -07:00
bnsgeyer
e91402aeb6
AP_Motors: tradheli-make all RSC params part of library
...
AP_Motors: Tradheli-fix RSC mode change while armed
AP_Motors: tradheli - improve RSC param metadata
AP_Motors: tradheli-put all throttle param settings in percent
2019-09-13 08:53:54 +09:00
Bill Geyer
fbf2b62300
AP_Motors: Tradheli - Make H3-120 swashplate the default
2019-08-06 08:24:59 +09:00
Bill Geyer
7ecc368d4f
AP_Motors: tradheli - remove white space in param values
2019-08-06 08:24:59 +09:00
Leonard Hall
036b47ec56
AP_Motors: Add seperate roll and pitch limits
2019-08-03 12:06:32 +09:00
Andrew Tridgell
2b3ced752b
AP_Motors: fixed typo in MotorsMatrixTS update for FF
2019-07-25 17:38:15 +09:00
Leonard Hall
0bb9db5139
AP_Motors: add feedforward input to mixers
2019-07-25 17:38:15 +09:00
Randy Mackay
10da6d553c
Copter: improve OctaV roll factors
2019-07-18 11:19:28 +09:00
Michael du Breuil
e3f1ef0c5e
AP_Motors: Refactor battery current interface
2019-07-14 00:28:00 -07:00
Leonard Hall
77f8ec9f43
AP_Motors: formatting fixes
2019-07-12 09:29:40 +09:00
Andrew Tridgell
8a49c84d57
AP_Motors: fixed col max and min for dual heli
...
fixes H_SV_MAN behaviour
2019-07-06 08:57:18 +10:00
Michael du Breuil
f6b8bf49a1
AP_Motors: Simplify the example includes
2019-06-18 10:02:05 +10:00
1iggy2
7323a5da9d
AP_Motors: Added Octo I frame
2019-06-04 09:49:44 +09:00
ChristopherOlson
fc84995fb9
AP_Motors:Heli - remove H_LAND_COL_MIN and replace with H_COL_MID
2019-06-04 09:48:03 +09:00
ChristopherOlson
b6bfc8947f
AP_Motors:Heli Governor - change rotor_rpm argument to a float
2019-06-03 07:53:01 +09:00
bnsgeyer
f1a32d7872
AP_Motors: Tradheli- modified thrcrv and gov parameter group names
2019-06-03 07:53:01 +09:00
ChristopherOlson
b1046c7b80
AP_Motors:Heli_RSC Governor - add method of droop compensation
...
- improve handling of outliers from speed sensor
- change governor_tc variable to governor_thrcurve
- remove equals zero from variable declarations
2019-06-03 07:53:01 +09:00
bnsgeyer
4120e29614
AP_Motors: Tradheli-complete conversion of throttle curve params to percent
...
add conversion for throttle curve params for upgrade
2019-06-03 07:53:01 +09:00
bnsgeyer
3629541a20
AP_Motors: Tradheli - implement enable params for throttle curve and governor
2019-06-03 07:53:01 +09:00
bnsgeyer
51d4029f03
AP_Motors: Tradheli - maintain consistent variable types as used in calcs
...
add override to declaration of new functions
2019-06-03 07:53:01 +09:00
ChristopherOlson
cca58e393a
AP_Motors:Heli_RSC - add support for rotor speed governor with droop speed control
2019-06-03 07:53:01 +09:00
Peter Barker
1e606cdc5b
AP_Motors: make desired spool state and spool state enum-classes
...
This will help avoid getting the enumerations mixed up
2019-04-14 12:18:03 +09:00
Randy Mackay
54fe1dad82
AP_Motors: add missing break to Hexa-H
2019-04-13 10:36:36 +09:00
murata
df85409a4c
AP_Motors: Integrate processing result setting true
2019-04-13 10:29:49 +09:00
Randy Mackay
a2373ebca2
AP_Motors: add support for Hexa-H frame
...
same as X frame except that middle motors are closer to center
2019-04-12 09:32:12 +09:00
Randy Mackay
928d7c7e71
AP_MotorsHeli: add range checking to ext_gyro_gain
2019-04-08 15:24:00 +09:00
bnsgeyer
01bd99907b
AP_Motors:Tradheli-swash library parameter scope improvement
2019-03-20 10:40:20 +10:00
bnsgeyer
79b069afc3
AP_Motors:tradheli-swash library general clean up
2019-03-20 10:40:20 +10:00
bnsgeyer
8c46fe1c61
AP_Motors: tradheli-fix parameters for generic swashplate and other minor fixes
2019-03-20 10:40:20 +10:00
bnsgeyer
9f547cc328
AP_Motors: Tradheli - support for linear servo output for swashplates
2019-03-20 10:40:20 +10:00
ChristopherOlson
b8d53b7a57
AP_Motors:TradHeli - add new swashplate descriptions to params for Heli Single and Heli Dual
2019-03-20 10:40:20 +10:00
bnsgeyer
d7e6298366
AP_Motors: Tradheli - add swashplate library
2019-03-20 10:40:20 +10:00
Mark Whitehorn
5cdfccad14
AP_Motors: specialize MotorsMatrixTS motor controls
2019-03-19 10:13:59 +11:00
IamPete1
d075965fce
AP_Motors: tailsiter remove push of plane ouputs
2019-03-06 14:46:39 +11:00
Mark Whitehorn
58a128f430
AP_Motors: add support for copter tailsitters
...
add MotorsMatrixTS tailsitter class
add X quadcopter tailsitter frame
add support for trimotor tailsitter
2019-03-06 07:53:46 +09:00
Tom Pittenger
3bbd80a5de
AP_Mount: unify singleton naming to _singleton and get_singleton()
2019-02-10 19:09:58 -07:00
Andrew Tridgell
cf8b059531
AP_Motors: added 3 more motor orders for X quads
...
- betaflight X
- DJI X
- clockwise X
2019-02-06 11:17:35 +11:00
Mark Whitehorn
35928a8d05
AP_Motors: fix regression for tiltrotors
2019-01-29 08:10:27 +09:00
Randy Mackay
1fa335a77b
AP_Motors: actuator_spin_up renamed to include _to_ground_idle
2019-01-21 20:55:07 +09:00
Randy Mackay
e2bd502b83
AP_Motors: minor format fixes
2019-01-21 20:13:43 +09:00
Matt
3d3f06cacb
AP_Motors: Add actuator output slew time to multicopters
...
Adds slew time limiting for throttling up and throttling down to multicopters. New parameters MOT_SLEW_UP_TIME and MOT_SLEW_DN_TIME added. 0 = disabled, no slew limiting. Valid values are 0 to 0.5 seconds. Also reworked functions related to linearization and PWM conversion to make more flexible throughout the code.
2019-01-21 20:07:58 +09:00
Peter Barker
b47733142f
GLOBAL: rename DataFlash_Class to AP_Logger
2019-01-18 18:08:20 +11:00
bnsgeyer
10572c2f9b
AP_Motors: remove unused defines from multicopter
2019-01-15 11:41:44 +09:00
bnsgeyer
28f4c68f2f
AP_MotorsHeli: add spool logic support
...
Also moved heli init_target_on_arming flag in from vehicle code
2019-01-15 11:41:44 +09:00
bnsgeyer
ac87b3e1e5
AP_Motors: spool state moved from multi to parent
...
Also rename SPIN_WHEN_ARMED to GROUND_IDLE
2019-01-15 11:41:44 +09:00
IamPete1
28884f60d5
AP_Motors: tricopter apply diffential thrust in forward flight
2019-01-15 10:19:19 +11:00
IamPete1
c26948ef59
AP_Motors: multicopter apply diffential thrust in forward flight
2019-01-15 10:19:19 +11:00
IamPete1
c82f158b56
AP_Motors: add get roll factor
2019-01-15 10:19:19 +11:00
expntly
790f609373
AP_Motors: document Hover_learn as copter only
2019-01-03 09:50:22 +09:00
Randy Mackay
a5699c7d5a
AP_Motors: boost-scale param desc update
2018-12-27 10:08:14 +09:00
Randy Mackay
db9ce0064b
AP_Motors: esc calibration outputs to throttleRight and throttleLeft
2018-12-21 11:19:18 +09:00
Randy Mackay
d4f838495d
AP_Motors: minor format fix to tailsitter
2018-12-21 11:19:18 +09:00
Randy Mackay
f89c18740d
AP_Motors: fix tailsitter tilt servo outputs
2018-12-21 11:19:18 +09:00
Randy Mackay
0d8e02d113
AP_Motors: Tailsitter output using SRV_Channels instead of rc_write
2018-12-21 11:19:18 +09:00
Randy Mackay
11c29b6af9
AP_Motors: Tailsitter minor typo and format fixes
2018-12-21 11:19:18 +09:00
Randy Mackay
84bcfce96b
AP_Motors: remove virtual from Tailsitter output_test_seq
2018-12-21 11:19:18 +09:00
IamPete1
4a7b2e8f8f
AP_MotorsTailsitter: add mixer and update to use standard AP_motors functions
2018-12-21 11:19:18 +09:00
bnsgeyer
1b90ef34cc
AP_Motors: Dualheli- fix bug for scaling second swashplate
2018-12-18 09:10:22 +09:00
Andrew Tridgell
d907c5757d
AP_Motors: added PlusRev motors type
...
this is a plus frame with reversed motor direction, needed for quad in
Morse simulator
2018-12-04 09:44:50 +11:00
Andrew Tridgell
f71013928a
AP_Motors: force PWM range for DShot to 1000 to 2000
2018-11-16 08:33:35 +11:00
Peter Barker
f2070da335
AP_Motors: add override keyword where required
2018-11-08 11:30:12 +11:00
Leonard Hall
2f87d8808f
AP_Motors: handle boost in spool up and down the same way
2018-10-16 00:44:50 +09:00
Randy Mackay
853a56dc9b
AP_MotorsMatrix: formatting fixes
2018-10-16 00:44:50 +09:00
Leonard Hall
4774cb8daf
AP_Motors: improved motor loss redundancy
...
This detects a failed motor on copters with at least 6 motors
and recalculates the mixer to compensate
2018-10-16 00:44:50 +09:00
bnsgeyer
833bc4e77d
AP_Motors: Tradheli - fixes slew speed of swashplate during collective servo test
2018-09-24 19:55:11 +01:00
Peter Barker
71c9c91c2d
AP_Motors: fix example
2018-09-19 22:40:20 -07:00
Randy Mackay
a5c59ce36e
AP_Motors: include boost_throttle in get_motor_mask
2018-08-27 10:35:02 +09:00
Randy Mackay
f85e84cc89
AP_Motors: add override keyword to get_motor_mask
2018-08-27 10:35:02 +09:00
Randy Mackay
f536c53fa6
AP_MotorsMatrix: minor format fix
2018-08-21 13:34:07 +09:00
Peter Barker
937d8dac97
AP_Motors: remove unneeded initialisations
2018-07-23 16:30:40 +09:00
Michael du Breuil
a5b8279ea4
AP_Motors: Remove unused ADC include
2018-07-17 09:29:50 +10:00
bnsgeyer
0f75866042
AP_Motors: Tradheli-corrected get_motor_mask method
2018-07-16 12:41:16 +10:00
bnsgeyer
dec8c5de77
AP_Motors: convert heli code to use SRV_Channels
...
this converts the heli code to use the SRV_Channels output
functions. It does not change behaviour, but removes the last vehicle
type that did its own servo output calculations. This change also
fixed servo initialization conflicts.
Note that this also allows helis to be setup with more than one
channel for a particular output (eg. two separate channels for tail
servo if they are wanted). This isn't likely to be used much, but does
make heli consistent with other vehicle types
2018-07-16 12:41:16 +10:00
Jacob Walser
24e21b57ca
AP_Motors: add output_test_num api for motor testing
2018-07-02 11:31:58 -04:00
Jacob Walser
abcb845af5
AP_Motors: refactor output_test -> output_test_seq
2018-07-02 11:31:58 -04:00
Jacob Walser
9ce9f95692
AP_Motors: make output_test signatures consistent and ensure override
...
specifier on derived classes
2018-07-02 11:31:58 -04:00
ChristopherOlson
1709c258bf
AP_Motors:TradHeli - fix metadata for H_COL_CTRL_DIR
2018-06-28 09:02:48 +09:00
Andrew Tridgell
4e414c02f5
AP_Motors: use scaled actuators for single and coax frames
...
this allows for multiple servos with the same motor function
2018-05-21 13:04:13 +10:00
Andrew Tridgell
216bab4de4
AP_Motors: fixed default motor functions for single and coax copter
...
should be enabling motors 5 and 6 to match docs and SITL
2018-05-21 13:04:13 +10:00
bnsgeyer
b20ebc6540
AP_Motors: Tradheli- removes unnecessary code from swash servo trim bug fix
2018-05-16 09:22:44 +10:00
Jacob Walser
e5bd6e289e
AP_Motors: Add current limiting to 6DOF motors for Sub
2018-04-29 17:16:34 -04:00
bnsgeyer
c8488e3333
AP_Motors: Tradheli - swashplate servo trim fix for heli single and dual frames
2018-04-24 10:30:26 +10:00
ChristopherOlson
9aa685a6d8
AP_Motors:TradHeli - single rotor only - add support for H3-140 swashplates.
...
Also changes the old definition to H3 for swashplates with fixed control radius and adjustable servo position.
2018-04-18 14:24:59 +09:00
ChristopherOlson
f073c58f68
AP_Motors:TradHeli - add support for reverse collective swashplates
2018-04-18 14:24:59 +09:00
Andrew Tridgell
819de4acd5
AP_Motors: don't scale oneshot125 in AP_Motors
...
handle it in the HAL backends, to allow for correct resolution
2018-04-07 09:10:29 +10:00
Andrew Tridgell
80a1688361
AP_Motors: make a singleton
...
this is used by AP_ESCSerial
2018-04-07 09:10:29 +10:00
Andrew Tridgell
bd9df6d0ec
AP_Motors: added DShot to parameter docs
2018-04-07 09:10:29 +10:00
Andrew Tridgell
e55d3a0834
AP_Motors: fix mask passed to rc_set_freq
...
the full motor mask must be supplied to work correctly for oneshot and
dshot
2018-04-07 09:10:29 +10:00
Andrew Tridgell
2c84d77306
AP_Motors: setup for DShot output modes
2018-04-07 09:10:29 +10:00
Michael du Breuil
050b8ebb32
AP_Motors: Allow specifying which battery is used for compensation
2018-03-27 22:12:21 +01:00
Michael du Breuil
98e327640d
AP_Motors: Use battery singleton
2018-03-27 22:12:21 +01:00
bnsgeyer
690e8fd3f4
AP_Motors: TradHeli - Changed RSC mode 3 to a spline fit throttle curve
2018-03-27 09:07:03 +11:00
ChristopherOlson
96793a3ae7
AP_Motors:TradHeli - DDVP Ramp/Runup
...
Change to ramp and runup DDVP tail rotor to prevent torque pitching the frame and provide runup in sync with main
rotor like a mechanically driven tail.
Fix some comments and remove indents found in whitespace in AP_MotorsHeli.cpp and AP_MotorsHeli.h
2018-03-14 09:18:07 +09:00
night-ghost
3165d72647
AP_Motors: reduce unnecessary multiple call of get_compensation_gain()
2018-01-24 19:26:15 +09:00
bnsgeyer
7a9e424977
AP_Motors: added comments to indicate parameter indices previously used by RSC_PWM_MIN, RSC_PWM_MAX, and RSC_PWM_REV
2018-01-23 14:12:27 +09:00
Andrew Tridgell
2c73b374f5
AP_Motors: protect against writes to NULL servo_aux
...
if user changes parameter while setting up it could crash
2018-01-21 21:12:13 +11:00
Andrew Tridgell
bdb9f062ae
AP_Motors: removed unused pwm parameters for heli
2018-01-21 21:12:13 +11:00
bnsgeyer
ac2e933358
AP_Motors: Tradheli - Fixed Directdrive Variable Pitch Feature
2018-01-21 21:12:13 +11:00
Leonard Hall
0a10deb3f7
AP_Motors: Fix gain scaling on Throttle Average Max and reduce additional gain on low throttle for Single and Coax.
2018-01-16 11:50:30 +09:00
Leonard Hall
eb6ab53f6c
AP_Motors: fix optimum thrust calcs
2018-01-13 10:06:11 +09:00
Hiroshi Takey (hiro2233)
aa6f66f29b
AP_Motors: Updated Motor example.
2018-01-09 08:12:01 +09:00
bnsgeyer
63bafa2c7f
AP_Motors: Tradheli- fixes servo_test function for Dual Heli frame
2017-11-08 11:07:08 +09:00
Andrew Tridgell
6358081b18
AP_Motors: apply tailsitter min spin to both motors
2017-11-04 11:41:40 +11:00
Andrew Tridgell
878d2e2563
AP_Motors: fixed tailsitter use of SPIN_MIN
2017-11-04 09:29:08 +11:00
bnsgeyer
37ea64513d
AP_Motors: TradHeli - fixed servo test function
2017-11-01 14:01:48 +09:00
Andrew Tridgell
e340fac2e0
AP_Motors: avoid float exception for small expo
...
very small values of the thrust expo cause a floating point
exception. As zero is a documented value meaning linear we need to
handle this.
2017-10-25 21:15:58 +11:00
Andrew Tridgell
45d6f3bf75
AP_Motors: fixed motor channel handling
2017-10-25 11:39:11 +11:00
Andrew Tridgell
fc237ee9a0
AP_Motors: merge fixed from rebase
2017-10-22 15:52:50 +11:00
Andrew Tridgell
efea83e424
AP_Motors: fixed MotorsMatrix set_update_rate()
2017-10-22 15:52:50 +11:00
Andrew Tridgell
1e62b5d5c7
AP_Motors: many to one mapping of motors
...
this allows multiple outputs for one motor number
2017-10-22 15:52:50 +11:00
Andrew Tridgell
03e1f6967f
AP_Motors: removed enable() API
...
all output channels are already enabled by SRC_Channels::enable_aux_servos()
2017-10-22 15:52:50 +11:00
Andrew Tridgell
c8b6be6736
AP_Motors: fixed scaling of servo outputs
...
thanks to bnsgeyer for noicing this in issue #6977
this will break existing dual-heli setups, but there are so few people
flying them so far that I think it is a worthwhile change
2017-10-10 11:02:34 +11:00
ChristopherOlson
7e086e8c4d
AP_Motors: Fix DDFP so tail motor doesn't start without Channel 8 high
2017-10-05 13:41:34 +11:00
Leonard Hall
d28182435e
AP_Motors: allow for negative thrust expo
...
This allows for motors with a thrust curve that decreases with demand.
2017-10-05 13:40:36 +11:00
Andrew Tridgell
e1f8e7bc58
AP_Motors: cope with H vs X frame in HeliQuad
2017-10-03 10:16:41 +11:00
Andrew Tridgell
09c3eeaf0c
AP_Motors: improved heli-quad yaw control
2017-10-03 10:16:41 +11:00
Andrew Tridgell
a7713da703
AP_Motors: reserve collective range for attitude control
2017-10-03 10:16:41 +11:00
Andrew Tridgell
f07aac396c
AP_Motors: support inverted flight for helicopters
2017-10-03 10:16:41 +11:00
Andrew Tridgell
55d5fe843e
AP_Motors: added Heli_Quad backend
...
supporting collective pitch quadcopters
2017-10-03 10:16:41 +11:00
Peter Barker
35d8f11e46
AP_Motors: eliminate GCS_MAVLINK::send_statustext_all
2017-07-11 23:53:53 +01:00
Jacob Walser
20889ff8a9
APMotors6DOF: Add motor reverse parameters for motors 9-12
...
Fix overruns found in coverity 145496-99
2017-07-11 09:34:40 +09:00
Andrew Tridgell
abd0831239
AP_Motors: changed BRUSHED16kHz to BRUSHED
2017-06-17 17:37:45 +10:00
Leonard Hall
9e86732edc
AP_Motors: accept external battery resistance estimate
2017-06-06 14:57:04 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
1b062d9d29
AP_Motors: Improve the PWM parameters descriptions
2017-06-06 11:06:26 +10:00
Jonathan Challinger
2e07f8824e
AP_Motors: reserve parameter index 38
2017-06-06 08:45:37 +09:00
murata
66fc49889b
AP_Motors: add dodeca-hexa
2017-05-27 14:21:13 +09:00
Randy Mackay
d00725b2ed
AP_Motors: rc_write handles motors 9 to 12
2017-05-27 14:21:13 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
9d9ebc91cd
AP_Motors: Use SI units conventions in parameter units
...
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
murata
46cba2c970
libraries: Delete the setting value for specific editor.
2017-05-11 13:18:41 -07:00
murata
10c446f69d
AP_Motors: Fit the indent column to the coding style.
2017-05-11 13:18:41 -07:00
Sriram Sami
379005ebc7
AP_Motors: Fix comment on expected variable range
...
the move_actuators function in AP_MotorsHeli_Dual previously
indicated incorrect ranges for its input variables.
2017-05-09 17:41:26 +09:00
Andrew Tridgell
46d9a1dcb5
AP_Motors: fixed tricopter tail servo in fwd flight
...
in quadplane forward flight the with tilt-tricopter tail servo needs to
be at its trim position. Thanks to Marco for noticing this.
2017-05-09 08:59:00 +09:00
Andrew Tridgell
bdc4320fe8
AP_Motors: added MOT_BOOST_SCALE
...
this is to support boost motors for copters, such as having a petrol
motor for extra lift on a multicopter
The scaling factor allows the user to control how much of the lift is
generated from the booster and how much from the main multicopter
motors
2017-05-08 11:02:55 +10:00
Andrew Tridgell
1f847132d7
AP_Motors: setup limits flags for tailsitters
2017-05-07 09:10:44 +10:00
Andrew Tridgell
2c4975ba31
AP_Motors: removed cork/push from AP_Motors
...
should be done by vehicle code if needed, so that AUX servos are sent
at the same time
2017-05-01 14:32:18 +10:00
Andrew Tridgell
6f54eef857
AP_Motors: force roll motors to 0 in tailsitter when disarmed
2017-04-14 13:01:48 +10:00
Andrew Tridgell
f571b34fd7
AP_Motors: setup RC speed for tailsitters
2017-04-11 17:34:40 +10:00
Andrew Tridgell
328541769d
AP_Motors: allow control surfaces to move disarmed
...
allow tailsitter control surfaces to move in Q modes when shutdown
2017-04-11 17:34:40 +10:00
Sriram Sami
8bb052d019
AP_Motors: update descriptions for new parameters
2017-04-01 05:25:59 +11:00
Sriram Sami
1793bac8d4
AP_Motors: add parameters for HELI_DUAL
...
- add COL2_MIN/MID/MAX parameters that control limits of rear swashplate
- output collective_mid correctly for rear swashplate when servo is in manual mode
2017-04-01 05:25:59 +11:00
Andrew Tridgell
1ad5e1db4e
AP_Motors: integrate AP_MotorsHeli_Dual
...
fixed issues with combining with Heli_Single
2017-03-25 16:22:10 +11:00
Fredrik Hedberg
998231ab0d
AP_Motors: added AP_MotorsHeli_Dual
...
for tandem and transverse helis
2017-03-25 16:22:10 +11:00
Jacob Walser
507b461388
AP_Motors: Initialize throttle range directly
...
This was causing SITL to hang at boot when motors object is statically allocated.
2017-02-28 22:34:35 -08:00
Lucas De Marchi
ade1876318
AP_Motors: tie esc scaling with set_throttle_range()
...
We need to update the esc scaling from inside the Motors library, that
has access to the MOT_PWM_[MIN|MAX] values. Otherwise even though the
AP_Motors library honors the value for calculations, the RCOutput
drivers that need the scaling to set the real HW scaling will not work.
Right now it scales the value using the throttle_channel's min/max, even
though AP_Motors may be passing values in other range.
2017-02-26 13:38:24 +11:00
Jacob Walser
cde1452da3
AP_Motors: Use fabsf instead of fabs
2017-02-22 11:25:18 -08:00
Rustom Jehangir
237ba87ca4
AP_Motors: New AP_Motors6DOF used by Sub
2017-02-21 11:26:14 +11:00
Andrew Tridgell
83d055eceb
AP_Motors: support twin-motor tailsitters
...
use differential thrust for roll
2017-02-18 17:26:43 +11:00
Andrew Tridgell
ac2a9c4b4a
AP_Motors: allow Copter to fly the tailsitter motors class
2017-02-18 17:26:43 +11:00
Andrew Tridgell
1a74b7fc0c
AP_Motors: started on tailsitter support
2017-02-18 17:26:43 +11:00
Andrew Tridgell
108cbe1dab
AP_Motors: mark tricopter yaw as tricopter only
2017-02-14 19:50:01 +11:00
Andrew Tridgell
2187417d74
AP_Motors: added MOT_SPOOL_TIME
...
this allows for quadplanes to have faster spoolup, which can help with
transitions
2017-02-14 09:23:17 +09:00
Randy Mackay
8b5aae37e0
AP_Motors: remove Hexa-H, change Octa-H factors
...
Octa-H is like an Quad-X but with each side having two additional motors placed between the front an back motors.
Octa-H is quite different from Quad-H.
2017-02-10 10:42:14 +09:00
Randy Mackay
872e0567be
AP_Motors: add H frame support for hexa and octa
2017-02-09 12:37:14 +09:00
Randy Mackay
a14265359f
Copter: reduce default MOT_THST_HOVER to 0.35
2017-02-07 11:20:25 +09:00
Andrew Tridgell
af44e9fdbd
AP_Motors: added frame type 11 for Y6 to match FireFly6
...
using same motor output mapping as AvA
2017-02-06 16:18:58 +11:00
murata
92eb179acf
AP_Motors: Unify from print or println to printf.
2017-01-27 18:20:22 +11:00
Andrew Tridgell
a6ecb94d24
AP_Motors: MotorsTri does not need its own var_info now
2017-01-20 12:05:09 +11:00
Andrew Tridgell
8e3bf71aa9
AP_Motors: allow single, tri and coax to be part of multicopter class
2017-01-12 17:39:37 +11:00
Andrew Tridgell
8799094278
AP_Motors: use SRV_Channel for tri tail servo
2017-01-12 17:39:37 +11:00
Andrew Tridgell
638f1364be
AP_Motors: adapt to new RC_Channel API
2017-01-12 17:39:37 +11:00
Randy Mackay
bdfb12123f
AP_Motors: fix frame-type enum for Y6B
...
Also remove unused NEW_PLUS
2016-12-31 10:55:23 +09:00
Randy Mackay
037e411e35
AP_Motors: fix example sketch
...
Also minor formatting fix
Thanks to OXINARF for spotting this
2016-12-31 10:55:23 +09:00
Randy Mackay
ffa6d1a5b9
AP_Motors: init fixes for frame_class, type and initialised_ok
...
Thanks to OXINARF for spotting these
2016-12-31 10:55:23 +09:00
Randy Mackay
a276f5dc90
AP_Motors: fix example sketch
2016-12-31 10:55:23 +09:00
Randy Mackay
7be0f437a9
AP_Motors: consolidate matrix multicopters
...
AP_MOTORS_x_FRAME definitions moved to motor_frame_type enum
init function and now accepts frame-class and type to perform initial motor setup
set_frame_class_and_type allows real-time changing of motor setup
initialised_ok flag and accessor records whether setup was successful
2016-12-31 10:55:23 +09:00
Randy Mackay
41189758b8
AP_Motors: move some functions to protected
...
Also minor formatting fix
2016-12-31 10:55:23 +09:00
priseborough
509709ce9d
AP_Motors: remove unused EKF1 include
2016-12-19 08:07:11 +11:00
Randy Mackay
2da7ea746b
MotorsHeli: minor formatting updates
2016-12-14 13:21:59 +09:00