Iampete1
d7cc2cb296
AP_HAL_ChibiOS: hwdef.py: allow same GPIO pin in multiple alt configs
2021-10-26 10:05:20 +11:00
kniuk
aabb6f7c59
AP_HAL_ChibiOS: add alt config GPIO to Matek F765-Wing
...
Based on new functionality introduced in #18753
2021-10-26 10:05:20 +11:00
Andrew Tridgell
822e657a70
HAL_ChibiOS: increase PROCESS_STACK on several boards
...
use min of 0xA00 for AP_Periph. A larger stack is needed for parameter
fetching
2021-10-20 19:06:35 +11:00
Iampete1
8459439798
AP_HAL_ChibiOS: CubeYellow: set default IMU arming temp margin
2021-10-19 11:16:45 +11:00
Iampete1
8e381b6017
AP_HAL_ChibiOS: CubeSolo: set default IMU arming temp margin
2021-10-19 11:16:45 +11:00
Iampete1
a004de65b3
AP_HAL_ChibiOS: CubePurple: set default IMU arming temp margin
2021-10-19 11:16:45 +11:00
Iampete1
e3289d2aec
AP_HAL_ChibiOS: CubeBlack: set default IMU arming temp margin
2021-10-19 11:16:45 +11:00
Iampete1
5d5a21a4ec
AP_Hal_ChibiOS: CubeOrange: set default min IMU temp margin
2021-10-19 11:16:45 +11:00
QioTek
fd2195d6fe
HAL_ChibiOS: added QioTekZealotH743 support
2021-10-19 08:17:43 +11:00
Andrew Tridgell
7aa968329c
HAL_ChibiOS: added Nucleo-L476 target
2021-10-17 20:30:20 +11:00
Andrew Tridgell
c8664e0b98
HAL_ChibiOS: added STM32L476 support
2021-10-17 20:30:20 +11:00
Andrew Tridgell
655c757c22
HAL_ChibiOS: added Sierra-L431 peripheral
2021-10-17 20:30:20 +11:00
Andrew Tridgell
5a68e21435
HAL_ChibiOS: support STM32L431
2021-10-17 20:30:20 +11:00
Andrew Tridgell
71e7bb0fe3
HAL_ChibiOS: mark af_parse_cubemx.py as executable, py3
2021-10-17 20:30:20 +11:00
Andrew Tridgell
f1ea4f5d01
HAL_ChibiOS: use a 16 bit sysinterval_t on 16 bit timers
...
prevent mixed size subtraction errors
2021-10-17 20:29:42 +11:00
bugobliterator
5fa50c419d
AP_HAL_ChibiOS: account for TXFIFO when doing flow control detection
2021-10-15 19:57:55 +11:00
Andrew Tridgell
d1c7ed1c82
HAL_ChibiOS: make it clear how to enable parameter backup on CubeBlack
...
uses 16k more ram, but allows auto-restore of corrupted params
2021-10-12 22:08:13 -04:00
Andrew Tridgell
84bbc707fc
AP_HAL_ChibiOS: added stack logging
2021-10-12 16:04:06 +11:00
auturgy
7c3c3a0a41
HAL_Chibios: support modalai_fc-v1 flight controller
...
Based on M0018 version. Thanks to ModalAI for assistance
2021-10-12 15:47:51 +11:00
Andrew Tridgell
6fa9768eab
HAL_ChibiOS: support GPIO get_mode and set_mode
2021-10-12 15:47:51 +11:00
Andrew Tridgell
25324ae0e2
HAL_ChibiOS: support SDMMC2 for sdcard
2021-10-12 15:47:51 +11:00
Andrew Tridgell
d962e094e7
HAL_ChibiOS: change RCIN PULLUP to PULLDOWN
...
this makes us more consistent between boards
2021-10-12 11:52:36 +11:00
Andrew Tridgell
47da7f5c9b
HAL_ChibiOS: change RCIN FLOAT to PULLDOWN
...
this lowers the chance of noise on a RCIN pin causing incorrect
protocol detection
2021-10-12 11:52:36 +11:00
Nick Exton
ffa2bba35c
HAL_ChibiOS: add missing return to Dual CDC get_usb_baud()
2021-10-12 10:54:44 +11:00
Andrew Tridgell
e6aae3caf6
HAL_ChibiOS: fix G4 I2c bus speeds
2021-10-12 10:54:07 +11:00
bugobliterator
f298ea406e
HAL_ChibiOS: enable RNG only for H7 based boards off for the rest by default
2021-10-07 19:43:11 +11:00
bugobliterator
fc4d59c5a4
HAL_ChibiOS: setup hw random number generator for stm32 chips
2021-10-07 19:43:11 +11:00
bugobliterator
792e6666a3
HAL_ChibiOS: add random number generator implementation for ChibiOS
2021-10-07 19:43:11 +11:00
Iampete1
9751cb5b24
AP_HAL_ChibiOS: move is_dshot_protocol up to AP_HAL
2021-10-06 18:59:57 +11:00
Iampete1
f7cba024c1
AP_HAL_ChibiOS: AnalogSource: check for valid pin
2021-10-06 18:42:51 +11:00
Andrew Tridgell
33529c98a9
HAL_ChibiOS: check the ROMFS line for IOMCU is added
2021-10-06 06:45:43 +11:00
Andrew Tridgell
52124cf602
HAL_ChibiOS: fixed f1 bootloader build errors
2021-10-06 06:44:36 +11:00
Andrew Tridgell
8deaa1b46b
HAL_ChibiOS: fixed warning for USB
2021-10-06 06:44:36 +11:00
Andrew Tridgell
4daf4ad501
HAL_ChibiOS: lock in no warnings for chibios RTOS build
2021-10-06 06:44:36 +11:00
Andrew Tridgell
4dbff85de7
HAL_ChibiOS: check for common hwdef.dat errors
...
catches missing GPIO type, mismatched timers and UARTs or bad pin types
2021-10-05 15:46:02 +11:00
Iampete1
f0a284c1e7
AP_Hal_ChibiOS: R9Pilot: add OUTPUT to GPIO
2021-10-05 15:46:02 +11:00
Iampete1
0143518954
AP_Hal_ChibiOS: mRoControlZeroF7: add OUTPUT to GPIO
2021-10-05 15:46:02 +11:00
Iampete1
a282a39866
AP_Hal_ChibiOS: F4BY: add OUTPUT to GPIO
2021-10-05 15:46:02 +11:00
Iampete1
6f1f26a72a
AP_Hal_ChibiOS: CubeOrange: add OUTPUT to GPIO
2021-10-05 15:46:02 +11:00
Iampete1
5848510876
AP_HAL_ChibiOS: set flow control disabled if no RTS line
2021-10-05 12:11:47 +11:00
Michel Pastor
a9fed2f9bc
RCOutput: fix full throttle bug
2021-10-05 11:47:04 +11:00
Andrew Tridgell
c15221fd53
HAL_ChibiOS: fixed orientation of ICM42605 on QiotekZealotF427
2021-10-03 14:00:09 +11:00
Andrew Tridgell
6953778b4c
HAL_ChibiOS: use micros16() for blheli pass-thru IRQ
...
saves some IRQ overhead, makes time handling more consistent
2021-10-02 18:26:39 +10:00
Andrew Tridgell
5714ee113f
HAL_ChibiOS: added micros16() method
2021-10-02 18:26:39 +10:00
Andrew Tridgell
2aef3364bc
HAL_ChibiOS: optimisation for AP_HAL::micros() on systems with 32 bit timers
...
most ChibiOS boards have a 32 bit timer. This optimisation reduces the
cost of micros() from 0.3us to 0.06us, which is significant in
interrupt handlers and for accurate timing. It takes advantage of the
timer being 32 bit with 1MHz clock
2021-10-02 18:26:39 +10:00
bugobliterator
dd9f513aa5
AP_HAL_ChibiOS: setup led control via lua script for HerePro
2021-09-30 08:52:27 +10:00
Iampete1
b6de44cc7b
AP_HAL_ChibiOS: CubeOrange: add alt config for telem1 RTS CTS as GPIO
2021-09-29 19:55:21 +10:00
Iampete1
8ae5bc5ad0
AP_HAL_ChibiOS: hwdef: allow GPIO alt config
2021-09-29 19:55:21 +10:00
Iampete1
a96150a528
AP_HAL_ChibiOS: allow enabling GPIO as alt config
2021-09-29 19:55:21 +10:00
Iampete1
dc45a113f9
AP_HAL_ChibiOS:UARTDriver: allow re-defintion of RTS and CTS pins
2021-09-29 19:55:21 +10:00
Andrew Tridgell
e85594e423
HAL_ChibiOS: added KakuteH7 support
2021-09-29 18:11:04 +10:00
Andrew Tridgell
d1d5cd5d9f
HAL_ChibiOS: fix sdcard on SPI bus on H7
...
the spiIgnore() call was hanging on H7. The ChibiOS submodule change
fixes that, but this patch is also needed to ensure we timeout any
spiIgnore calls correctly
2021-09-29 18:11:04 +10:00
Andrew Tridgell
2c2c85c4d8
HAL_ChibiOS: fixed polled SPI
2021-09-29 18:11:04 +10:00
Andrew Tridgell
27e93155f4
HAL_ChibiOS: fixed build on boards with OTG2 and no CAN interfaces
2021-09-29 18:11:04 +10:00
Iampete1
ade01f41d9
AP_HAL_ChibiOS: support digital write via IOMCU
2021-09-28 09:40:25 +10:00
Andrew Tridgell
4aa88d172c
HAL_ChibiOS: adjust Swan-K1 parameters
...
limit down pitch to 15 degrees to prevent overspeed, and limit angular
rates to 100 deg/s
2021-09-27 21:21:53 +10:00
Peter Barker
43469955a9
AP_HAL_ChibiOS: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED
2021-09-26 19:24:09 +10:00
Josh Henderson
27fa2e776d
AP_HAL_ChibiOS: Hitec-Airspeed move from HAL_NO_GCS to HAL_GCS_ENABLED
2021-09-24 21:05:05 +10:00
Andrew Tridgell
6d093e56fb
HAL_ChibiOS: added Nucleo-L496 AP_Periph target
2021-09-24 18:08:00 +10:00
Andrew Tridgell
0212e23cd3
HAL_ChibiOS: added support for STM32L496 MCUs
...
good MCU for AP_Periph
2021-09-24 18:08:00 +10:00
Peter Barker
1bd62362a4
AP_HAL_ChibiOS: move from HAL_NO_GCS to HAL_GCS_ENABLED
2021-09-22 21:37:00 +10:00
Andrew Tridgell
758ce2699e
HAL_ChibiOS: added Hitec-Airspeed hwdef
2021-09-21 13:51:40 +10:00
Andrew Tridgell
7f59366cc0
HAL_ChibiOS: process AIRSPEED lines in hwdef.dat
2021-09-21 13:51:40 +10:00
Iampete1
bf695e4eeb
AP_HAL_ChibiOS: atof to strtof
2021-09-15 17:36:12 +10:00
Hwurzburg
6dfbd9ce31
AP_HAL_ChibiOS: add batt mon defaults to Kakutef4 Mini
2021-09-14 10:14:20 +10:00
Iampete1
53ee7d861d
AP_HAL_ChibiOS: remove safe PWM
2021-09-14 09:23:02 +10:00
Andrew Tridgell
88d77d0acd
HAL_ChibiOS: change f303-PWM timers
...
fixes PWM on channels 3 and 4
2021-09-13 21:29:13 +10:00
Andrew Tridgell
adbaccaa08
HAL_ChibiOS: fixed RTSCTS flow control issue
...
this fixes an issue reported on MatekH743, but also applies to other
boards. When not using DMA if there have been bytes written before the
auto flow control detection was enabled then these must be cleared
from _total_written so the flow control detection can work correctly
2021-09-13 21:28:08 +10:00
mateksys
659286ee4f
ChibiOS: add icm42605 as substitution for icm20602
2021-09-11 17:37:12 +10:00
Iampete1
529a3a9122
AP_HAL_ChibiOS: convert back to full range on IOMCU ONESHOT125 read
2021-09-08 18:01:50 +10:00
Andy Piper
e705f78b5e
AP_HAL_ChibiOS: correct and compact Pixhawk4-bdshot build
2021-09-08 17:09:49 +10:00
Andy Piper
c92c75c9a6
AP_HAL_ChibiOS: bdshot version of CUAVv5
2021-09-08 17:09:49 +10:00
Andy Piper
bb41db8478
AP_HAL_ChibiOS: bdshot version of CUAVv5Nano
2021-09-08 17:09:49 +10:00
Andrew Tridgell
d29057a158
HAL_ChibiOS: added f303-PWM
...
for a PWM output node based on mRo f303 CAN node
2021-09-08 17:06:44 +10:00
Andrew Tridgell
2e4766fe54
HAL_ChibiOS: ensure HI_POWER periph is on
2021-09-07 10:40:44 +10:00
Andrew Tridgell
532396e5e6
REVERT: HAL_ChibiOS: Rename STM32F412 hw definition file
...
This reverts commit 5de6c690d8
.
That commit broke the build for the affected board as the chibios
headers rely on the name of the file matching a ifdef
2021-09-07 10:37:43 +10:00
Andrew Tridgell
b77580f934
HAL_ChibiOS: avoid an issue with DCache init on H743
...
this fixes an issue found by Andy Piper where the H743 bootloader gets
a hard fault in the DCache enable code when SRAM1 is primary memory.
This is the simplest fix I could think of, and avoids the problem by
making DTCM the first segment in the bootloader.
Note that we can't use DTCM as first segment for main firmware since
we went to double precision EKF as the static variables don't fit
2021-09-06 18:23:03 +10:00
Hwurzburg
d0b67baefd
AP_HAL_ChibOS: add pin defs for RSSI to KakuteF7
2021-09-06 10:12:48 +10:00
Hwurzburg
854697f870
AP_HAL_ChibiOS: update default params for SWAN-K1
2021-09-06 08:07:06 +10:00
Andrew Tridgell
8462ce4e2e
HAL_ChibiOS: fixed GPIO lines for QioTekZealotF427
2021-09-03 18:16:43 +10:00
bugobliterator
4ecdf90470
AP_HAL_ChibiOS: add internal flash version of hwdef for H757I_EVAL
2021-09-01 17:10:53 +10:00
Siddharth Purohit
d484477a99
AP_HAL_ChibiOS: move to using PLL2_R_CK for QSPI
2021-09-01 17:10:53 +10:00
Siddharth Purohit
81dc237a19
AP_HAL_ChibiOS: move to using Instruction RAM with External Flash setup
2021-09-01 17:10:53 +10:00
Siddharth Purohit
1eb318c62b
AP_HAL_ChibiOS: increase clock frequency for QSPI
2021-09-01 17:10:53 +10:00
Siddharth Purohit
39bd229279
AP_HAL_ChibiOS: remove dependency on Semaphores in QSPIDevice in BL
2021-09-01 17:10:53 +10:00
Siddharth Purohit
813e93a69c
AP_HAL_ChibiOS: do not reset GPIO for boards with external flash
2021-09-01 17:10:53 +10:00
Siddharth Purohit
4ba2835de1
AP_HAL_ChibiOS: add config for supporting load from external flash
2021-09-01 17:10:53 +10:00
Siddharth Purohit
faedb12493
AP_HAL_ChibiOS: fix hwdef generation for bootloader supporting ext flash
2021-09-01 17:10:53 +10:00
Siddharth Purohit
6e81fcbed1
AP_HAL_ChibiOS: add support for things required to run QSPIDriver
2021-09-01 17:10:53 +10:00
Siddharth Purohit
a039711628
AP_HAL_ChibiOS: prepare H757I_EVAL for external flash programming
2021-09-01 17:10:53 +10:00
Andrew Tridgell
fdfa14c4c0
HAL_ChibiOS: adjust Swan-K1 tuning
2021-09-01 14:04:35 +10:00
Andrew Tridgell
f4ad8f6ef5
HAL_ChibiOS: fix for HAL_PWM_COUNT zero
...
reported by Mallikarjun
2021-09-01 13:05:20 +10:00
Andrew Tridgell
584fb7cd7b
HAL_ChibiOS: use more USB buffers on higher end F7 chips
2021-08-31 10:12:00 +10:00
Andrew Tridgell
39f44147b8
HAL_ChibiOS: reduce the impact of UART DMA contention
...
this changes the heuristics for UART TX DMA allocation to greatly
reduce the chances of DMA contention causing long delays on other
devices
This fixes issues with FETTec driver output and gimbal status messages
as reported by Amilcar and OlliW. The problem is particularly bad when
no GPS is connected to GPS1 on fmuv3 and derived boards (such as
CubeBlack)
key changes:
- remember the contention_counter across begin() calls, as the GPS
calls begin with new baudrates regularly
- added a is_shared() API to Shared_DMA, allowing the UART driver to
avoid TX DMA on shared streams when at low baudrates.
2021-08-31 07:55:27 +10:00
Marek Łukasiewicz
5de6c690d8
HAL_ChibiOS: Rename STM32F412 hw definition file
2021-08-30 10:27:45 +10:00
bugobliterator
fd95c32d88
AP_HAL_ChibiOS: add CubeOrange Periph Heavy build
2021-08-27 09:17:30 -07:00
Andrew Tridgell
858a6b7e87
HAL_ChibiOS: allow FlywooF745 to build again
2021-08-27 07:45:58 +10:00
Marek S. Łukasiewicz
47f2e13024
HAL_ChibiOS: Add hwdef for BirdCANdy
2021-08-26 09:43:39 +10:00
bugobliterator
a32a32ab43
HAL_ChibiOS: change name for USART2_CTS pin in STM32H757xx.py
2021-08-25 10:09:23 +10:00
bugobliterator
21ad3c7ac1
AP_HAL_ChibiOS: add HereID board
2021-08-25 10:09:23 +10:00