bugobliterator
|
e26f429557
|
waf: setup to use new canard dsdl generator
|
2021-10-14 20:13:06 +11:00 |
bugobliterator
|
d1d3dee7f1
|
modules: add pyuavcan
|
2021-10-14 20:13:06 +11:00 |
tajisoft
|
f076bb3ad1
|
AP_Scripting: update ahrs-source-gps-optflow.lua
|
2021-10-14 10:36:29 +11:00 |
Pierre Kancir
|
12e1f67326
|
AP_Compass: only update last_update_ms on raw_field update if on calibration
|
2021-10-13 19:45:03 +11:00 |
Josh Henderson
|
f67a4ec025
|
Tools: High_Latency2 Test Fix Location Distance Test
|
2021-10-13 19:40:45 +11:00 |
Josh Henderson
|
941cd6ebc2
|
Tools: arduplane.py add HIGH_LATENCY2 tests and Check Air_Temperature
|
2021-10-13 19:40:45 +11:00 |
Josh Henderson
|
8af299f978
|
Plane: HIGH_Latency2 check get_temperature return and return INT8_MIN
|
2021-10-13 19:40:45 +11:00 |
Peter Barker
|
893354ccfe
|
RC_Channel: correct spelling error in parameter description
|
2021-10-13 19:36:20 +11:00 |
Andrew Tridgell
|
faba02a3f5
|
Plane: apply the takeoff throttle slew limit to quadplanes
this applies the limit when we are in a fwd transition, both in AUTO
modes and stabilized modes
|
2021-10-13 18:53:45 +11:00 |
李孟晓
|
e5efc52324
|
AP_BattMonitor: Add support for BatteryInfoAux message
|
2021-10-13 18:44:05 +11:00 |
李孟晓
|
36ceb76cae
|
AP_UAVCAN: Add battery ID field
|
2021-10-13 18:44:05 +11:00 |
李孟晓
|
54b68ffae3
|
GCS_MAVLink: Provide the time remaining
|
2021-10-13 18:44:05 +11:00 |
李孟晓
|
bf1a17825c
|
AP_BattMonitor: Provide the time remaining
|
2021-10-13 18:44:05 +11:00 |
Peter Barker
|
5125874681
|
autotest: add some tests for running multiple GPSs
|
2021-10-13 18:02:16 +11:00 |
Peter Barker
|
265616b582
|
autotest: tidy use of dump_message_verbose
|
2021-10-13 18:02:16 +11:00 |
Peter Barker
|
7446a28c45
|
autotest: augment simulated GPS tests
|
2021-10-13 18:02:16 +11:00 |
Andrew Tridgell
|
d1c7ed1c82
|
HAL_ChibiOS: make it clear how to enable parameter backup on CubeBlack
uses 16k more ram, but allows auto-restore of corrupted params
|
2021-10-12 22:08:13 -04:00 |
Andrew Tridgell
|
24f40d9049
|
AP_Mission: allow for more jump commands on high memory boards
and allow override of maximum in custom hwdef.dat
|
2021-10-13 12:49:12 +11:00 |
Josh Henderson
|
3642b14a0b
|
ArduCopter: Guided pos_control_run add yaw_rate timeout
|
2021-10-13 09:46:24 +11:00 |
Tom Pittenger
|
e9ce1886c8
|
GCS_MAVLink: unify DO_SET_CAM_TRIG_DIST for missions and cmd_long
|
2021-10-12 15:04:00 -07:00 |
Pierre Kancir
|
73ff525a30
|
Copter: fix takeoff end report on EXTEND_STATE
regression from https://github.com/ArduPilot/ardupilot/pull/18700.
thanks to @arduouspilot on discuss to notice this, see https://discuss.ardupilot.org/t/extended-sys-state-never-changes-once-guided-takeoff-is-started/76996/3
|
2021-10-12 16:59:39 -04:00 |
Peter Barker
|
f5d5387358
|
AP_HAL_SITL: remove unused ext_fifo_fd member variable
|
2021-10-12 20:07:19 +11:00 |
Peter Barker
|
87df943f99
|
autotest: add option to use simulated FRAM for storage
|
2021-10-12 20:01:49 +11:00 |
Peter Barker
|
00c6308b25
|
autotest: add test for FRAMStorage
|
2021-10-12 20:01:49 +11:00 |
Peter Barker
|
376e7d2a21
|
Tools: add simulated RAMTRON device
|
2021-10-12 20:01:49 +11:00 |
Peter Barker
|
e9165fdeab
|
SITL: add simulated RAMTRON device
|
2021-10-12 20:01:49 +11:00 |
Peter Barker
|
67226433e3
|
AP_HAL_SITL: add simulated RAMTRON device
|
2021-10-12 20:01:49 +11:00 |
Peter Barker
|
437e0e6459
|
SITL: add simulated SPI devices
|
2021-10-12 20:01:49 +11:00 |
Peter Barker
|
58a7f022fd
|
AP_HAL_SITL: add simulated SPI devices
|
2021-10-12 20:01:49 +11:00 |
Randy Mackay
|
c524b6e5b5
|
Copter: 4.0.8 release notes
TradHeli release only
|
2021-10-12 14:28:20 +09:00 |
Andrew Tridgell
|
1559f7aa2d
|
AP_Logger: added stack logging
|
2021-10-12 16:04:06 +11:00 |
Andrew Tridgell
|
8157c24977
|
AP_HAL: added stack logging
|
2021-10-12 16:04:06 +11:00 |
Andrew Tridgell
|
84bbc707fc
|
AP_HAL_ChibiOS: added stack logging
|
2021-10-12 16:04:06 +11:00 |
Andrew Tridgell
|
8e729841e8
|
Tools: added modalai_fc-v1 bootloader
|
2021-10-12 15:47:51 +11:00 |
Andrew Tridgell
|
4b4eaabe55
|
Tools: setup for building modalai_fc-v1
|
2021-10-12 15:47:51 +11:00 |
auturgy
|
7c3c3a0a41
|
HAL_Chibios: support modalai_fc-v1 flight controller
Based on M0018 version. Thanks to ModalAI for assistance
|
2021-10-12 15:47:51 +11:00 |
Andrew Tridgell
|
28c34bdce4
|
Tools: recognise more USB devices for uploader
|
2021-10-12 15:47:51 +11:00 |
Andrew Tridgell
|
00491275e0
|
waf: added image_maxsize to apj files
this allows the px4_uploader.py script to load apj files
|
2021-10-12 15:47:51 +11:00 |
Andrew Tridgell
|
d8c0d82857
|
AP_RCProtocol: allow DSM bind using uart RX pin directly
|
2021-10-12 15:47:51 +11:00 |
Andrew Tridgell
|
6fa9768eab
|
HAL_ChibiOS: support GPIO get_mode and set_mode
|
2021-10-12 15:47:51 +11:00 |
Andrew Tridgell
|
029743e27a
|
AP_HAL: added support for saving and restoring GPIO settings
this allows for using any pin (eg. UART TX, RX, RTS, CTS) as a GPIO,
and restoring the old mode. Initial use is for spektrum bind on RX pin
|
2021-10-12 15:47:51 +11:00 |
Andrew Tridgell
|
25324ae0e2
|
HAL_ChibiOS: support SDMMC2 for sdcard
|
2021-10-12 15:47:51 +11:00 |
Andrew Tridgell
|
281b8eb234
|
AP_BattMonitor: support LTC2946 I2C battery monitoring
|
2021-10-12 15:47:51 +11:00 |
Andrew Tridgell
|
2903e10fc0
|
AP_BattMonitor: added INA231 backend
only enabled via hwdef.dat for now
|
2021-10-12 15:47:51 +11:00 |
Andrew Tridgell
|
8d9c9d9130
|
AP_BoardConfig: allow override of BRD_SAFETYENABLE default
|
2021-10-12 15:47:51 +11:00 |
Andrew Tridgell
|
130f26c49a
|
Tools: added --no-extf option to uploader.py
needed for PX4 bootloader
|
2021-10-12 15:47:51 +11:00 |
Andrew Tridgell
|
e0d23c6495
|
AP_Bootloader: sync with PX4 board types
|
2021-10-12 15:47:51 +11:00 |
Peter Barker
|
5b8a3c3ff9
|
SITL: use enumeration in place of O_RDWR for I2C register defs
|
2021-10-12 14:44:31 +11:00 |
Iampete1
|
e99a5c6ef4
|
Plane: Quadplane: reinstate THR PWM param discriptions for stable users
|
2021-10-11 22:19:17 -04:00 |
Iampete1
|
67abf23077
|
Tool: autotest: defaults: remove MOT_PWM_MIN and _MAX
|
2021-10-11 22:19:17 -04:00 |