Commit Graph

3722 Commits

Author SHA1 Message Date
Andrew Tridgell 0d6b847966 AP_Notify: grab initial flags state in init()
this prevents annoying tones on startup of APM:Plane
2013-09-18 10:55:42 +10:00
Andrew Tridgell 284492cfec AP_GPS: fixed an initialisation problem with GPS drivers
before the first full packet arrives we could report uninitialised
values for groundspeed and heading
2013-09-16 21:20:36 +10:00
Andrew Tridgell 4864496ae6 SITL: reduce default GPS delay to 0.4
closer to real uBlox delay
2013-09-16 11:41:51 +10:00
Andrew Tridgell 84ed2141a0 AP_Math: fixed float rounding in location_offset()
this prevents rounding of positions in the rover code
2013-09-16 11:38:55 +10:00
Andrew Tridgell 3e24ff1b07 AP_SteerController: change the scaling of the D term
this should cope better with low speed
2013-09-16 09:42:45 +10:00
Andrew Tridgell e85d275fe5 SITL: added SIM_SERVO_RATE parameter
this allows a slew rate for servos to be specified in degrees/second
2013-09-16 09:16:52 +10:00
Andrew Tridgell 98b4ed1522 AP_SteerController: lower the default STEER2SRV_D 2013-09-16 08:26:29 +10:00
Randy Mackay d16587340d AP_Notify: add PX4's tone_alarm
Sounds added for arming, disarming and low battery events
2013-09-15 17:24:00 +09:00
Andrew Tridgell 9be02fb493 AC_Fence: changed to AP_Vehicle.h 2013-09-13 11:46:32 +10:00
Andrew Tridgell fbe4be94cf APM_Control: changed to AP_Vehicle.h 2013-09-13 11:46:22 +10:00
Andrew Tridgell 15a4582ed7 AP_AHRS: changed to AP_Vehicle.h 2013-09-13 11:46:10 +10:00
Andrew Tridgell 2e742582e4 AP_Airspeed: changed to AP_Vehicle.h
also allow updates to ARSPD_RATIO from user while autocal is running
2013-09-13 11:45:57 +10:00
Andrew Tridgell 23fc6f8aed AP_HAL_AVR: changed to AP_Vehicle.h 2013-09-13 11:45:24 +10:00
Andrew Tridgell c64950e4f5 AP_InertialNav: changed to AP_Vehicle.h 2013-09-13 11:45:10 +10:00
Andrew Tridgell a67413d495 AP_Mount: changed to AP_Vehicle.h 2013-09-13 11:44:54 +10:00
Andrew Tridgell 645eb711cb DataFlash: changed to AP_Vehicle.h 2013-09-13 11:44:42 +10:00
Andrew Tridgell 16d2ad9796 AP_TECS: changed to AP_Vehicle.h 2013-09-13 11:44:31 +10:00
Andrew Tridgell 30ebcd36ac AP_SpdHgtControl: removed AircraftParameters 2013-09-13 11:44:19 +10:00
Andrew Tridgell 79a4bc6ea4 AP_Vehicle: added new header for parameters in multiple libraries
this adds a header where we can put vehicle specific parameters that
will be used in multiple libraries
2013-09-13 11:43:59 +10:00
Andrew Tridgell 5bef6dd539 AP_Motors: fixed example build 2013-09-13 10:53:53 +10:00
Andrew Tridgell cc4fad23d9 AP_Airspeed: updates for Pixhawk 2013-09-13 10:48:57 +10:00
Andrew Tridgell 2990359043 PX4: Implement accurate ratiometric voltage reading on Pixhawk
this uses the monitoring of the 5V rail to compensate for changes in
the 5V reference versus the 3.3V ADC reference. It reduces the noise
on ratiometric sensors by a factor of about 6x.
2013-09-13 10:48:57 +10:00
Randy Mackay 0a047ae1c1 Copter Motors: increased spin-when-armed to 70
Changed choices to be displayed in ground stations
2013-09-12 22:36:04 +09:00
Randy Mackay 62cb5c172b Copter Motors: add slow start feature
Combined armed, frame orientation and slow_start into flags bitmask
Removed ability to set max throttle because it was never used
Re-ordered class variables
2013-09-12 22:27:44 +09:00
Randy Mackay ac98644405 Sprayer: minor change to flags type 2013-09-12 22:24:14 +09:00
Andrew Tridgell bc3249fada SITL: fixed Vcc voltage 2013-09-12 16:34:38 +10:00
Andrew Tridgell 3a3cecf5ff PX4: support getting servorail voltage from ORB 2013-09-12 16:28:06 +10:00
Andrew Tridgell 457ca0b57d AP_ADC_AnalogSource: fixed APM1 build 2013-09-12 13:28:11 +10:00
Andrew Tridgell fb56feb6b2 HAL_PX4: support all analog input pins, with scaling
this allows voltage/current/Vcc sensing on FMUv2
2013-09-12 13:26:00 +10:00
Andrew Tridgell a80d3344f5 AP_HAL_AVR: support voltage_latest() 2013-09-12 13:25:17 +10:00
Andrew Tridgell a587b1140a AP_HAL: added voltage_latest() interface
this will be used for reading the 5V rail
2013-09-12 13:23:04 +10:00
Andrew Tridgell b7e54bd463 AP_Airspeed: reduce speed of autocal
it was responding to noise too rapidly

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2013-09-12 07:48:57 +10:00
Andrew Tridgell 2171f2a80b AP_SteerController: move scaler onto integrator input
this should make integrator scale with speed

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2013-09-12 07:48:57 +10:00
Randy Mackay 5e7a6b3b98 Sprayer: add pump min rate and test
If pump is enabled while copter is disarmed it will spray as if
travelling at 1m/s
2013-09-11 17:04:58 +09:00
Randy Mackay b3c636dfa3 AP_Notify: add radio and battery failsafe
radio and battery failsafe are slow flashing yellow
pre-arm check failure changed to double flashing yellow
2013-09-11 14:36:05 +09:00
Andrew Tridgell 341dca4dfe AP_L1_Control: added set_default_period()
used by the rover code
2013-09-09 19:55:53 +10:00
Andrew Tridgell 7b3a674d66 AP_InertialSensor: added set_default_filter() method 2013-09-09 19:18:52 +10:00
Andrew Tridgell 229841052a AP_Compass_PX4: removed MAGIOCSSAMPLERATE call 2013-09-09 18:04:41 +10:00
Andrew Tridgell c044385fff AP_AHRS: added groundspeed() method
this gives ground speed in m/s from GPS
2013-09-09 18:04:41 +10:00
Andrew Tridgell 0918393fed APM_Control: fixed some documentation typos 2013-09-09 18:04:40 +10:00
Andrew Tridgell 7413c15959 APM_Control: added a ground vehicle steering controller
this will be used both for the rover code, and for ground steering of
a plane on takeoff
2013-09-09 18:04:40 +10:00
Andrew Tridgell f5d20b4085 SITL: reduce the minimum accel and gyro noise
on APM2 and PX4 we do a lot of smoothing of accels and gyros, so a 2
bit error isn't a good representation of the min noise
2013-09-09 18:04:40 +10:00
Andrew Tridgell 396c4f30d2 AP_InertialSensor_PX4: don't set QUEUEDEPTH
the default of 2 samples is fine
2013-09-09 18:04:40 +10:00
Andrew Tridgell db14a85fc5 AP_Compass: added more debugging to AP_Compass_PX4 driver
this helps debug compass initialisation issues
2013-09-09 18:04:40 +10:00
Andrew Tridgell 8b80beadc4 PX4: make FMUv2 identify itself differently
so we can tell which is which in logs
2013-09-09 18:04:40 +10:00
Andrew Tridgell 7328369b91 GCS_MAVLink: added FENCE_ACTION_GUIDED_THR_PASS 2013-09-08 07:29:30 +10:00
Andrew Tridgell ff0f6bcd42 AP_InertialSensor: fixed example build 2013-09-07 21:03:59 +10:00
Andrew Tridgell b8b72819c1 AP_Compass: ignore COMPASS_ORIENT for internal compass
this means if COMPASS_ORIENT is not 0 and the external compass fails
to start on boot we don't end up with a bad compass orientation
2013-09-07 16:49:51 +10:00
Andrew Tridgell 5484b97419 AP_GPS: reset _fix_count to 0 on nav settings update
this makes it run every 20s exactly
2013-09-04 13:18:00 +10:00
Andrew Tridgell 879d44f930 AP_GPS: use the mask bits to only set dynamic model
this ensures we don't try to change any other CFG_NAV5 settings
2013-09-04 13:17:20 +10:00