Commit Graph

24501 Commits

Author SHA1 Message Date
Tom Pittenger
d780e66cc4 AP_ADSB: remove deinit() 2020-11-30 16:05:17 +11:00
Tom Pittenger
e94697cb4c AP_ADSB: Allow for multiple backends in the future drivers 2020-11-30 16:05:17 +11:00
Tom Pittenger
20d21fe175 SITL/examples: remove ADSB param that is already default 2020-11-30 16:05:17 +11:00
Peter Barker
88895f9b13 GCS_MAVLink: stop using one backend's signing structure for all backends 2020-11-30 14:11:08 +11:00
Andrew Tridgell
8914bb45f8 AP_DAL: fix for uartI support 2020-11-30 14:09:31 +11:00
Andrew Tridgell
af0ee82ff1 AP_SerialManager: support uartI, allowing a total of 9 uarts
this allows for OTG2 on the MatekH743 board, which makes SLCAN much
easier
2020-11-30 14:09:31 +11:00
Andrew Tridgell
a7a5879c0c AP_HAL_SITL: support uartI, allowing a total of 9 uarts
this allows for OTG2 on the MatekH743 board, which makes SLCAN much
easier
2020-11-30 14:09:31 +11:00
Andrew Tridgell
78711e05b7 AP_HAL_Linux: support uartI, allowing a total of 9 uarts
this allows for OTG2 on the MatekH743 board, which makes SLCAN much
easier
2020-11-30 14:09:31 +11:00
Andrew Tridgell
68fdf033ee AP_HAL: support uartI, allowing a total of 9 uarts
this allows for OTG2 on the MatekH743 board, which makes SLCAN much
easier
2020-11-30 14:09:31 +11:00
Andrew Tridgell
217433ee16 AP_HAL_Empty: support uartI, allowing a total of 9 uarts
this allows for OTG2 on the MatekH743 board, which makes SLCAN much
easier
2020-11-30 14:09:31 +11:00
Andrew Tridgell
4d171ec19a AP_HAL_ChibiOS: support uartI, allowing a total of 9 uarts
this allows for OTG2 on the MatekH743 board, which makes SLCAN much
easier
2020-11-30 14:09:31 +11:00
Peter Barker
52b8b95a72 AP_NavEKF3: rearrange readGPSData to remove some nesting 2020-11-30 11:51:12 +11:00
Phillip Kocmoud
c9182b39d5 hwdef: mRo Control Zero H7 OEM - update and improve uniformity 2020-11-30 08:48:36 +11:00
Phillip Kocmoud
b55920165a hwdef: mRo Pixracer Pro - update and improve uniformity 2020-11-30 08:48:36 +11:00
Peter Barker
72acc8bfc8 AP_InertialSensor: use primary gyro (not accel) for get_delta_angle_dt 2020-11-29 13:21:53 +11:00
Phillip Kocmoud
a379bb8fc5 hwdef: mRo Control Zero F7 update and improve uniformity 2020-11-28 20:28:22 +11:00
Andrew Tridgell
a587195912 HAL_ChibiOS: change f303-MatekGPS to 5Hz by default 2020-11-27 19:41:33 +11:00
Randy Mackay
4cd1c3cfde AP_NavEKF3: param conversion loses config_error
config_error should only be run as part of setup because it may never return
2020-11-27 08:20:07 +09:00
Andrew Tridgell
8c959c4e13 AP_BoardConfig: added an EXPECT_DELAY_MS to config_error
this prevents a config_error called after setup() has complete from
causing a watchdog. That is a bit more friendly
2020-11-26 17:06:13 +09:00
Hwurzburg
7a82898e92 AP_GPS: expand gps rate description 2020-11-26 18:25:29 +11:00
Kawamura
cef0c87c4c AP_Scripting: fix method name for ahrs-source.lua 2020-11-25 21:07:19 +09:00
Hwurzburg
f37d8e5865 RC_Channel: add inflight airspeed cal rc switch 2020-11-25 21:30:15 +11:00
Hwurzburg
615b8add8c AP_Airspeed: add inflight airspeed cal rc switch 2020-11-25 21:30:15 +11:00
Randy Mackay
8c2688605e AP_AHRS: active_EKF_type fallback to DCM checks if GPS configured for use 2020-11-25 21:00:07 +11:00
Randy Mackay
adfc92523b AP_NavEKF3: add configuredToUseGPSForPosXY 2020-11-25 21:00:07 +11:00
Randy Mackay
4087d7b792 AP_NavEKF2: add configuredToUseGPSForPosXY 2020-11-25 21:00:07 +11:00
Andy Piper
a6436851b4 AP_Logger: account for expected delays and boot time delays in block logger. 2020-11-25 18:17:34 +11:00
Peter Barker
fdbffd19c6 AP_NavEKF_Source: remove defaults for baro and compass
This makes all our defaults "NONE", meaning that a user will not see a
prearm failure for any source other than those in the primary set when
using the default configuration.
2020-11-25 15:19:00 +11:00
Peter Barker
8124c3fea8 AP_NavEKF_Source: set compass_required if we require a compass 2020-11-25 15:19:00 +11:00
Tom Pittenger
67405cedb2 AP_HAL_ChibiOS: add AP_BattMonitor support to CubeBlack&Orange-periph 2020-11-25 14:20:53 +11:00
Tom Pittenger
87813b9401 AP_Generator: AP_Periph should not include Generator by default 2020-11-25 14:20:53 +11:00
Tom Pittenger
171a10e117 AP_BattMonitor: Add support for multiple UAVCAN batteries from a single node 2020-11-25 14:20:53 +11:00
Tom Pittenger
48e2b78cab AP_BattMonitor: fix compile for AP_Periph 2020-11-25 14:20:53 +11:00
Tom Pittenger
089f3aa349 AP_HAL: allow hwdef to define HAL_SUPPORT_RCOUT_SERIAL - must be disabled for AP_Periph 2020-11-25 14:20:53 +11:00
Andy Piper
a592d76866 AP_Scripting: fix compile on clang 10 2020-11-25 09:28:06 +11:00
Andrew Tridgell
7eea13f86f AP_NavEKF3: fixed build of standalone replay link test
parameter conversion not needed for replay
2020-11-24 20:46:37 +11:00
Hwurzburg
ae8fe818c8 RC_Channel: move RETRACT_MOUNT option to common for all vehicles 2020-11-24 20:22:02 +11:00
Peter Barker
42d9727f49 AP_Logger: correct documentation on ARSP message 2020-11-24 15:33:37 +11:00
Gone4Dirt
5edae526fd AP_Math: Add conversion Ams to mAh 2020-11-24 12:54:52 +11:00
Peter Barker
c52298352a AP_HAL_SITL: add simulator for IntelligentEnergy 2.4kWh 2020-11-24 12:54:52 +11:00
Peter Barker
f7b2856af0 SITL: add simulator for IntelligentEnergy 2.4kWh
SITL: Added setup note to comment

SITL: IE24: Add Error param and cycle battery pwr
2020-11-24 12:54:52 +11:00
Gone4Dirt
a2d2e85ba1 AP_Logger: Reinstate Watt unit 2020-11-24 12:54:52 +11:00
Gone4Dirt
d25f9d5d3a AP_Vehicle: Move AP_Generator to all vehicles 2020-11-24 12:54:52 +11:00
Gone4Dirt
2dc684622e AP_Arming: Add support for AP_Generator frontend 2020-11-24 12:54:52 +11:00
Gone4Dirt
66285b65ce RC_Channel: Add support for AP_Generator frontend 2020-11-24 12:54:52 +11:00
Gone4Dirt
caf1ad28d5 GCS_Common: AP_Generator_Richenpower is now AP_Generator 2020-11-24 12:54:52 +11:00
Gone4Dirt
836717c0af AP_BattMonitor: Add support for AP_Generator frontend-backend 2020-11-24 12:54:52 +11:00
Gone4Dirt
8cfe4fc9f7 AP_Generator: Split into frontend-backend and add IE fuel cells 2020-11-24 12:54:52 +11:00
Gone4Dirt
6c136862b8 AP_DAL: Add stdio include 2020-11-24 12:54:52 +11:00
Gone4Dirt
9d90d16c2b AP_ADSB: Access snprintf from hal 2020-11-24 12:54:52 +11:00