Commit Graph

6240 Commits

Author SHA1 Message Date
rmackay9 75401756f2 ArduCopter: maintain loiter control even below 1m while landing 2012-12-06 12:40:53 +09:00
rmackay9 2dd4694eef ArduCopter: adjusted pid_throttle_accel dt to 0.01 (100hz) 2012-12-06 10:32:12 +09:00
rmackay9 269e02ee93 ArduCopter: bug fix - initialise inertial nav 2012-12-06 10:32:07 +09:00
rmackay9 8d682b9812 ArduCopter: disable INERTIAL_NAV_XY by default 2012-12-06 10:32:02 +09:00
rmackay9 39d524212f ArduCopter: allow accel based throttle controller to be enabled/disabled with the new THR_ACC_ENABLE parameter.
When disabled the original velocity based throttle controller is used.
2012-12-06 10:31:57 +09:00
rmackay9 a5bb54e36e ArduCopter: RTL clean-up and slightly improved landing sensor
Consolidated RTL state to be captured by rtl_state variable.
Combined update_RTL_Nav and verify_RTL functions which performed the same function but one was for missions, the other for the RTL flight mode.
Renamed some RTL parameters and global variables to have RTL at the front.
Landing detector now checks accel-throttle's I term and/or a very low throttle value
2012-12-06 10:31:52 +09:00
rmackay9 6da07ef1d2 ArduCopter: increase CONTROL_SWITCH_COUNTER so that flight mode switch must be changed for at least 1/10th of a second 2012-12-06 10:31:46 +09:00
rmackay9 072ffec493 ArduCopter: allow INERTIAL_NAV to be enabled separately for horizontal and vertical position 2012-12-06 10:31:41 +09:00
rmackay9 aa5e7e63a0 ArduCopter: switch on INS in APM_Config.h (i.e. on by default for users uploading through Arduino IDE) 2012-12-06 10:31:36 +09:00
rmackay9 bdb47c449a ArduCopter: pass linear altitude error to throttle rate controllers.
Previously the requested rate used the square root of the altitude error.

Scale pilot's desired vertical rate and acceleration based on ACCELERATION_MAX_Z and VELOCITY_MAX_Z #defines
2012-12-06 10:31:31 +09:00
rmackay9 d7f76ebd87 ArduCopter: add tuning of throttle rate controller's I term (THROTTLE_KI) 2012-12-06 10:31:25 +09:00
rmackay9 7b4ed2d227 ArduCopter: restored landing detector to landing throttle mode.
Added LAND_SPEED parameter to control the rate of descent for the last 10m of a landing.
Added CH6 tuning for accel based throttle controller.
2012-12-06 10:31:20 +09:00
rmackay9 560bb1d738 ArduCopter: removed unused AUTO_THROTTLE_HOLD #define 2012-12-06 10:31:15 +09:00
rmackay9 7035529953 ArduCopter: remove unused get_desired_climb_rate function 2012-12-06 10:31:09 +09:00
rmackay9 a94826f182 ArduCopter: add set_throttle_mode to better control initialisation of variables 2012-12-06 10:31:04 +09:00
rmackay9 1036b35128 ArduCopter: added back in angle boost and recombined for heli and multicopter 2012-12-06 10:30:55 +09:00
rmackay9 3cbef57c64 ArduCopter: first merge of leonard's accel based altitude controller plus other changes from Randy
Changes include:
New low-level get_throttle_accel function takes target acceleration and compares vs earth-frame Z accelerometer values to produce output to motors.
Higher level throttle controllers modified to call new get_throttle_accel controller
Throttle_rate_stabilized controller added which maintains a desired climb/descent rate
Throttle_land controller added - descends using normal auto throttle controller to 10m then descends at 50cm/s
Multiple throttle modes added including landing mode
Land flight mode no longer needs GPS
Throttle cruise maintenance moved to update_throttle_cruise function
2012-12-06 10:30:49 +09:00
rmackay9 e6686dcab8 ThirdOrderCompFilter: remove last_time_constant_xy and _z static variables to save 8 bytes. 2012-12-06 10:24:58 +09:00
rmackay9 06d1c6b0c1 AP_Buffer: bug fix to allow buffer to completely fill up.
Also removed redundant _tail parameter which saves 1 byte.
2012-12-06 10:18:00 +09:00
rmackay9 8b5f66255e AP_InertialSensor: add comments to give credit for accel calibration method to Rolfe Schmidt 2012-12-05 09:35:55 +09:00
rmackay9 a92b7f3477 AP_InertialSensor: add comments to give credit for accel calibration method to Rolfe Schmidt 2012-12-05 09:20:31 +09:00
Robert Lefebvre a5c4e65cdf ACM: TradHeli
Fix for Rotor Speed Controller to switch on/off with Ch8 as opposed to the old way (throttle).
2012-12-04 15:09:27 -05:00
Robert Lefebvre 8c18a60766 ACM: Small fix to Yaw Look Ahead 2012-12-04 14:50:14 -05:00
Robert Lefebvre 1d589c0b7d ACM: TradHeli
Fixes for Attitude rate controllers.
2012-12-04 14:42:04 -05:00
Robert Lefebvre 5723021be1 ACM: TradHeli
Creating Rate Feed-Forward Parameters
2012-12-04 13:47:38 -05:00
Robert Lefebvre 3e65dd3ded ACM: TradHeli APM_Config.h changes 2012-12-04 13:32:40 -05:00
Robert Lefebvre 315a7e8000 ACM: Yaw Look Ahead Changes 2012-12-04 13:26:41 -05:00
Michael Oborne 47529e9454 firmware build 2012-12-04 08:52:48 +08:00
Andrew Tridgell 898aa0b260 Plane: fixed spelling error 2012-12-04 11:38:29 +11:00
Andrew Tridgell e4949291e5 Plane: preparing for 2.68 release 2012-12-04 11:24:24 +11:00
Andrew Tridgell 33e6edcab2 scripts: added apm2 hil to build_all.sh 2012-12-04 11:13:54 +11:00
Andrew Tridgell 805a340350 Plane: enable attitude and raw logging in HIL modes 2012-12-04 11:13:33 +11:00
Andrew Tridgell 3b18c57691 AP_InertialSensor: removed axis getters for accel/gyro
these were only being used in one place, and in that place were used
incorrectly!
2012-12-04 09:11:55 +11:00
Andrew Tridgell 4484144228 Rover: removed INS print code
its all in parameters now
2012-12-04 09:11:55 +11:00
Andrew Tridgell cbb97f7294 Plane: added apm2 hilsensors target 2012-12-04 09:05:02 +11:00
Andrew Tridgell d2f9a705ea MAVLink: clarify frame of reference for HIL_STATE 2012-12-03 23:31:34 +11:00
Andrew Tridgell 15abc784ec MAVLink: use a smaller maximum payload to reduce memory
this limits the sizes of the MAVLink buffers. It doesn't make a big
difference now, but it will matter when we update to the latest
mavlink code which has some very large packets
2012-12-03 23:28:23 +11:00
Andrew Tridgell 5e77119377 AP_InertialSensor: fixed stub driver to work correctly with sensors HIL 2012-12-03 23:27:21 +11:00
Andrew Tridgell 24e1af1c82 Plane: fixed sensors and attitude HIL
we now use the Stub version of the InertialSensor driver. In sensors
HIL we can now correctly drive the AHRS code.
2012-12-03 23:26:39 +11:00
Andrew Tridgell 53951f995a Plane: fixed GPS course in HIL 2012-12-03 17:38:55 +11:00
Andrew Tridgell 567cb47d35 Plane: fixed SERVO_OUTPUT_RAW for HIL 2012-12-03 17:38:31 +11:00
Robert Lefebvre 9130045298 ACM: Code Cleanup 2012-11-30 17:05:12 -05:00
Andrew Tridgell 1104287aa2 Plane: use enum FlightMode in more places 2012-12-01 08:15:48 +11:00
Andrew Tridgell 1fcffc6de9 autotest: increase speed in fly square test for ArduCopter
should prevent occasional timeouts
2012-12-01 08:08:54 +11:00
Andrew Tridgell f5abc2c25e Plane: switch to an enum for flight modes 2012-12-01 08:08:54 +11:00
rmackay9 8141f0b600 ArduCopter: bug fix - increase mpu6k sample rate to 100hz 2012-11-30 23:49:18 +09:00
Andrew Tridgell b237c0583d AP_InertialSensor: Added INS_MPU6K_FILTER option
this allows the user to select the MPU6000 filtering frequency
2012-11-30 07:15:19 +11:00
Andrew Tridgell cd5ad49417 Rover: switch to IMU driven timing, same as ArduPlane 2012-11-30 07:15:19 +11:00
Andrew Tridgell 4f868e04cc AP_InertialSensor: return the example sample count in Oilpan 2012-11-30 07:15:19 +11:00
Andrew Tridgell c7dd042909 InertialNav: update example for new interface 2012-11-30 07:15:19 +11:00