Commit Graph

5100 Commits

Author SHA1 Message Date
Randy Mackay 010665f915 Copter: fix esc calibration for one-shot
the cork and push need to be done from the vehicle level
2017-05-23 07:57:17 +09:00
Randy Mackay b4d7d4f43f Copter: resolve compiler warnings in autotune GCS messages 2017-05-22 12:34:06 +09:00
Peter Barker d5afd01ef2 Copter: remove duplicate autotune rotation warning 2017-05-18 16:28:00 +09:00
Randy Mackay ca8ae06bba Copter: minor format fix to landing-gear update function 2017-05-18 12:26:19 +09:00
Peter Barker 34eae9d9cb Copter: AutoTune: include axis being tuned in output 2017-05-18 09:36:00 +09:00
Peter Barker 0bc17645fb Copter: AutoTune: add gcs messages detailing wait-for-level state 2017-05-18 09:36:00 +09:00
Peter Barker 586a5df814 Copter: add GCS messaging during autotune 2017-05-18 09:36:00 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas f366095113 Copter: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 60aeade0f4 Copter: Add missing @RebootRequired: True 2017-05-15 21:51:16 +09:00
Randy Mackay 376b9e994f Copter: AC3.5-rc6 release notes 2017-05-15 15:04:28 +09:00
Randy Mackay 91d4b4777b Copter: respond to param list request after motor init 2017-05-15 14:13:43 +09:00
Pierre Kancir 436d0f8c84 ArduCopter: radio fix passthrough range on heli/coax/single 2017-05-13 10:19:20 +09:00
Randy Mackay caa2148e45 Copter: move esc calibration startup check to after servo function initialisation 2017-05-11 11:30:05 +09:00
Randy Mackay 0e7f12049c Copter: fix esc calibration is safety switch has been disabled 2017-05-11 11:30:05 +09:00
Randy Mackay f9c8bb1b01 Copter: ensure esc calibration only occurs on next reboot
It was possible for a board with no safety switch attached to get stuck waiting for the user to press the non-existance switch.  Rebooting now resolves the problem because the ESC_CAL parameter is reset to zero regardless of whether the calibration completes or not.
2017-05-11 11:30:05 +09:00
Randy Mackay a3450a955d Copter: fix LED notify during auto esc calibration 2017-05-11 11:30:05 +09:00
karthik.desai d7976078a5 Copter: fix typo in comments 2017-05-08 10:08:31 +09:00
murata 8fd9c73b78 Copter: Add SuperSimpleMode "2" to Simple Mode setting. 2017-05-08 09:31:23 +09:00
Andrew Tridgell 3b33434695 Copter: removed AP_Airspeed from vehicle code 2017-05-04 22:59:02 -07:00
Luis Vale Gonçalves 04cb1027b8 Copter: minor fix to release notes 2017-05-03 17:10:27 +09:00
Randy Mackay f2131ed2d0 Copter: AC3.5-rc5 release notes 2017-05-03 14:08:45 +09:00
Peter Barker b37e64b23c Copter: stop appending lf to PERF message 2017-05-01 16:21:55 +01:00
Peter Barker 069e0d1973 Copter: move init of DataFlash references into vehicle init
It is possible to start a log before the existing codepath is crossed.
2017-05-01 15:04:34 +01:00
Peter Barker 6ccb7cf3f4 Copter: tidy dataflash Frame reporting 2017-05-01 19:16:47 +10:00
Andrew Tridgell 22791b7272 Copter: use common send_queued_parameters() 2017-05-01 14:36:10 +10:00
Andrew Tridgell 49b18819ce Copter: enable channels in ESC calibration 2017-05-01 14:32:18 +10:00
Andrew Tridgell 2ba6e7af35 Copter: fixed aux servos in RC failsafe
we should always output to channels
2017-05-01 14:32:18 +10:00
Andrew Tridgell 10b89db498 Copter: call BoardConfig.init_safety() at end of startup
this fixes a bug where motors can start on soft reboot
2017-04-30 21:47:04 +10:00
Randy Mackay aab27d8d0e Copter: auto loiter initialisation simplified
The simpler set_wp_destination can be used instead of set_wp_origin_and_destination
2017-04-28 09:10:02 +09:00
Randy Mackay 65e97a9503 Copter: rtl initialises wp controller earlier
We need to initialise wp controller or the build_path could use the wrong speeds and accelerations when calculating the origin (aka stopping point)
2017-04-28 09:10:02 +09:00
Andrew Tridgell 1875d2adab Copter: fixed duplicate include of AP_ADC library 2017-04-27 18:32:26 +10:00
Randy Mackay 81f8ab3933 Copter: guided init uses vertical stopping point 2017-04-27 14:36:23 +09:00
Randy Mackay a342b73604 Copter: guided velocity contoller inits accel and jerk
In practice this has no functional impact because the guided_pos_control_start initialises these values (using AC_WPNav) and it is not currently possible for a user to get to the velocity controller without having first used the guided position controller
2017-04-27 14:35:46 +09:00
Randy Mackay 1a246851fc Copter: enable radio failsafe by default 2017-04-24 17:07:42 +09:00
Peter Barker afbdbcce26 Copter: log GPS detection state to DF on log startup 2017-04-23 21:04:17 +01:00
karthik.desai afc382c342 Copter: moved beacon logging to dataflash 2017-04-22 10:55:08 +09:00
Randy Mackay 8f43b60247 Copter: set EKF origin from first do-set-home command 2017-04-22 10:37:31 +09:00
Randy Mackay 3348ab4fa8 Copter: send upward DISTANCE_SENSOR message to GCS 2017-04-20 18:11:43 +09:00
Randy Mackay 496e8f3cdb Copter: integrate proximity method rename 2017-04-20 18:11:43 +09:00
Andrew Tridgell 1a8669201e Copter: ignore MSG_AOA_SSA 2017-04-19 20:48:42 +10:00
Randy Mackay 713c08672f Copter: integrate AP_VisualOdom 2017-04-19 11:04:40 +09:00
Randy Mackay d5dd7e719a Copter: add AP_VisualOdom to build 2017-04-19 11:04:40 +09:00
Andrew Tridgell ebde6e1ce3 Copter: output any servo channels on motor output
if we have any auxillary servo channels we need to calculate the
output value
2017-04-18 09:34:42 +09:00
Randy Mackay 032bfad79f Copter: move rc input check to esc_calibration_startup_check
No functional change
2017-04-18 09:29:55 +09:00
Randy Mackay fc675a1e4a Copter: do not allow motor test before initialisation completes 2017-04-18 09:29:53 +09:00
Randy Mackay 1bfbf0d43f Copter: enable motors at end of initialisation 2017-04-18 09:29:51 +09:00
Francisco Ferreira bf22919a8c Copter: add support for MANUAL_CONTROL message 2017-04-12 16:16:11 +09:00
Michael du Breuil ea89bd1178 Copter: Send BATTERY_STATUS 2017-04-12 10:21:49 +09:00
murata 597dbb2df4 Copter: Compare bit variables, change set values.
Copter: Change from comment 1 to true.
2017-04-12 09:19:07 +09:00
Tom Pittenger 01de4b1176 Copter: clarify release notes for Intel Aero
update ReleaseNotes to clarify that the copter 3.4.0-rc4 (06-Sep-2016) note "Intel Aero flight controller support" does not mean the Intel Aero RTF.
2017-04-10 16:42:25 -07:00
Randy Mackay 7478ae9eb4 Copter: TUNE parameter description fixes 2017-04-08 15:35:05 +09:00
Randy Mackay 7f93818d31 Copter: 3.5-rc4 release notes 2017-04-08 15:32:01 +09:00
Andrew Tridgell b4d9397821 Copter: re-arrange fast_loop for minimum latency
this makes motor outputs as responsive as possible to gyros
2017-04-03 13:04:11 +09:00
Randy Mackay 5497030ebf Copter: version to 3.6-dev 2017-03-30 08:19:18 +09:00
Jacob Walser 587c50c1a1 Copter: Remove redundant nested #if CLI_ENABLED 2017-03-29 19:20:51 +01:00
Jonathan Challinger 054aab738b Copter: remove const qualifier from do_precision_loiter 2017-03-29 14:06:12 +09:00
Andrew Tridgell 01206f9e59 Copter: add available memory to PM message 2017-03-27 14:35:21 +09:00
Andrew Tridgell 6bb5c16fb8 Copter: allow for HELI_DUAL configurations 2017-03-25 16:22:10 +11:00
Randy Mackay 50523619b9 Copter: 3.5-rc3 release notes 2017-03-25 11:50:40 +09:00
Randy Mackay dfe3922d82 Copter: modify pre-arm check wording
- slight wording change to RC pre-arm check
- shorten Accelerometers to Accels to allow failure message to fit on MP HUD
2017-03-25 10:50:58 +09:00
Randy Mackay bff9189afc Copter: fixup fence pre-arm checks
- require GPS if polygon fence is enabled
- fence pre-arm failure shows failure message
- tell user fence is enabled which is why GPS is required
2017-03-25 10:50:58 +09:00
Lucas De Marchi cc7633f272 ArduCopter: replace board ifdef with feature ifdef 2017-03-24 12:06:19 +11:00
Lucas De Marchi b17acfee12 Add aerofc support
Flight Controller board that comes on Intel Aero RTF Drone.
2017-03-24 12:06:19 +11:00
Jacob Walser 353202e03c Copter: Fix parameter metadata 2017-03-22 16:16:26 -07:00
Randy Mackay 15d96b4b5d Copter: release notes for 3.4.6 2017-03-15 09:40:17 +09:00
Andrew Tridgell 54b852ebfe Copter: fixed var table loading for heli single parms
we were not loading parameters such as the swash angle
2017-03-15 11:31:45 +11:00
Andrew Tridgell dae1567d6c Copter: log home and origin on logging start 2017-03-14 10:51:15 +11:00
Randy Mackay 375f7b15ff Copter: 3.5-rc2 release notes 2017-03-13 12:25:07 +09:00
Randy Mackay 8140353c64 Copter: log event when primary GPS changes 2017-03-13 11:31:51 +11:00
Randy Mackay b30d743812 Copter: AP_Arming calls parent's gps checks
Allows removing some duplicate code
2017-03-13 11:31:51 +11:00
Peter Barker 1d70a337dd Copter: remove unused desired_climb_rate variable 2017-03-09 19:52:58 +11:00
Randy Mackay ca4cbaeb39 Copter: run rate controllers before AHRS/EKF update
This reduces lag between IMU updates and motor outputs by 0.6 milliseconds
2017-03-03 13:14:28 +11:00
Randy Mackay e8c5612587 Copter: fix reference to PosControl param descriptions
No functional change
2017-03-01 14:59:44 +09:00
Randy Mackay 627e3faf41 Copter: fix SYSID_ENFORCE parameter description 2017-02-28 15:06:51 +09:00
Andrew Tridgell 0d1bcd3b94 Copter: added automatic yaw to autotune position control 2017-02-27 19:34:44 +09:00
Andrew Tridgell fa119f8231 Copter: enable poshold in autotune only from LOITER or POSHOLD 2017-02-27 19:34:42 +09:00
Andrew Tridgell 37fca03db3 Copter: implement simple position hold during autotune
this holds position during tuning with low gain
2017-02-27 19:34:36 +09:00
Randy Mackay c100f53ee6 Copter: add upward distance to proximity logging 2017-02-27 15:18:24 +09:00
Randy Mackay 34726208b2 Copter: clarify CHX_OPT avoidance and adsb-avoidance 2017-02-27 15:18:23 +09:00
Randy Mackay 51c00f8144 Copter: use only downward facing rangefinder 2017-02-27 15:18:16 +09:00
Lucas De Marchi a589a84e32 ArduCopter: just call set_throttle_range()
Now set_throttle_range in AP_Motors does the right thing, calling out
the RCOutput method.
2017-02-26 13:38:24 +11:00
Jacob Walser 868be023ee Copter: Refactor fence.get_safe_alt() to fence.get_safe_alt_max() 2017-02-21 11:26:14 +11:00
Andrew Tridgell f1917dddd0 Copter: changes for AC_WPNav 2017-02-18 17:26:43 +11:00
Andrew Tridgell 92fdef5b97 Copter: changed for AP_AHRS_View on AC_AttitudeControl 2017-02-18 17:26:43 +11:00
Andrew Tridgell aad412eaef Copter: support tailsitter frame class 2017-02-18 17:26:43 +11:00
Andrew Tridgell 3cb88d0a23 Copter: added tailsitter frame support 2017-02-18 17:26:43 +11:00
Andrew Tridgell 7efca1881c Copter: fixed a problem with initial parameter fetch
if the GCS connects before the motors have been allocated then it will
get an incorrect parameter count from the MAVLink param protocol. We
need to prevent the PARAM_REQUEST_LIST message from being replied to
until motors are allocated which is done as part of init_ardupilot
2017-02-15 17:16:30 +10:00
Andrew Tridgell 6b6d03eb8d Copter: fixed upgrade of parameters
now that we dynamically allocate many key objects in copter we need to
move the parameter upgrade code to after when the objects are allocated
2017-02-15 15:02:06 +10:00
Andrew Tridgell d8972d5344 Copter: setup frame type parameter flags 2017-02-14 19:50:01 +11:00
Peter Barker 65a182a068 Copter: not in log download upon log erase
erase is a synchronous operation
2017-02-13 11:36:16 +11:00
Peter Barker 029aeeb4fd Copter: support for a GCS singleton 2017-02-13 09:32:01 +11:00
Peter Barker f49f153da0 Copter: rename gcs[] to gcs_chan[]
Wish to use gcs() to return the gcs singleton
2017-02-13 09:32:01 +11:00
Randy Mackay d2cc340587 Copter: 3.4.5 release notes 2017-02-11 15:15:42 +09:00
Clément 3aa17d17eb Copter : set land_complete to false during guided takeoff (same fix as for auto takeoff bug) 2017-02-07 20:19:17 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 4161c34e61 Copter: rename MSG_RADIO_OUT to MSG_SERVO_OUTPUT_RAW to better describe what it is 2017-02-07 11:41:12 +11:00
Peter Barker b7f982d7ce Copter: support for arming and disarming using an auxsw 2017-02-06 16:48:50 +09:00
Andrew Tridgell 00711f5a98 Copter: fixed typo in param generation 2017-02-06 15:36:52 +11:00
Andrew Tridgell 79b23dff0e Copter: fixed parameter path 2017-02-06 15:12:32 +11:00
Michael Day 49e3ce8e75 Copter: Now recognizes DO_FENCE_ENABLE mission command. 2017-02-05 00:10:14 +00:00
Pierre Kancir 1455f8c513 Copter: correct advance failsafe 2017-01-31 11:22:54 +09:00