Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
52,160 Commits 71 Branches 509 Tags 716 MiB
Commit Graph

378 Commits

Author SHA1 Message Date
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers 
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
 2016-10-24 09:42:01 -02:00
Andrew Tridgell 5a9276a5c4 Copter: added SYSID_ENFORCE parameter 
allows enforcement of SYSID_MYGCS
 2016-10-15 17:14:19 +11:00
Leonard Hall 5c47f3f9e5 Copter: add acro throttle and yaw expo and smoother manual pilot throttle 2016-10-15 11:27:53 +09:00
Randy Mackay 0aab175051 Copter: move proximity to g2 2016-10-14 14:02:29 +09:00
Randy Mackay fcc2a1b378 Copter: integrate AP_Proximity into main vehicle 2016-10-13 20:21:07 +09:00
Andrew Tridgell d0dd10aeea Copter: added DEV_OPTIONS parameter 
this is for little used options to allow standard firmware builds to
enable those options for development purposes

First option is for MAVLink based ADSB avoidance
 2016-09-12 16:24:34 +10:00
Andrew Tridgell f18e0dadc9 Copter: added optional AdvancedFailsafe for copter and heli 2016-08-25 14:14:18 +10:00
Andrew Tridgell 89c10a2db9 Copter: rename WP_TKOFF_NAV_ALT to WP_NAVALT_MIN 
this is in preparation for using the same parameter for landing as
well
 2016-08-16 11:26:56 +10:00
Randy Mackay 9842840346 Copter: GND_EFFECT_COMP parameter to enable ground effect compensation 2016-08-09 13:31:36 +09:00
chambana 25940c8e0f Copter: add THROW_TYPE and allow dropping vehicle to trigger motors 2016-08-02 20:25:52 +09:00
Randy Mackay f0f87a2f0c Copter: add throw_nextmode 
vehicle switches to mode specified in THROW_NEXTMODE parameter after the
throw is completed.
 2016-08-02 20:25:52 +09:00
Randy Mackay d50987f976 Copter: avoidance_adsb implements copter avoidance using ADSB 2016-07-25 20:24:37 +09:00
Andrew Tridgell cb5ca713a9 Copter: added AP_Button support 2016-07-22 15:01:20 +10:00
Andrew Tridgell 3a8ed06267 Copter: added TKOFF_NAV_ALT parameter 
this adds TKOFF_NAV_ALT which controls the altitude above takeoff that
navigation can begin. It is meant for unstable vehicles such as helis
to prevent blade strike during initial takeoff.

This also adds a new parameter class ParametersG2 which can hold 64
parameters. This is to avoid running out of parameters in the first
256 block
 2016-07-07 14:21:47 +09:00
Daniel Ricketts 87be8daf0e Copter: integrate AC_Avoidance library 2016-06-22 11:38:15 +09:00
Leonard Hall 48eb4cf674 Copter: remove THR_MID 2016-06-18 11:55:49 +09:00
Leonard Hall dec9323127 Copter: remove THR_MIN 
Equivalent is AP_Motors SPIN_MIN
 2016-06-18 11:55:49 +09:00
Andrew Tridgell 045e3c179a Copter: moved EKF2 to a new parameter index 
the meanings of many of the parameters have changed. Best to use a new
index to prevent old parameters from causing crashes
 2016-05-25 19:35:17 +10:00
Randy Mackay 7689315ba2 Copter: rename sonar to rangefinder 2016-05-21 10:36:53 +09:00
Randy Mackay 74e02d2c82 Copter: rename TERRAIN_USE to TERRAIN_FOLLOW 
This matches plane's parameter name
 2016-04-30 10:33:01 +09:00
Randy Mackay 91f6c7b503 Copter: add TERRAIN_USE parameter 
Also add terrain.cpp to hold terrain_update and terrain_logging functions
 2016-04-30 10:33:01 +09:00
Randy Mackay bde498375c Copter: remove attitude PIDs 
These are now part of AC_AttitudeControl
 2016-04-01 11:59:30 +09:00
Randy Mackay 1f37f5a0e7 Copter: remove tradheli swash, yaw and rsc servos 
These are all created within the AP_MotorsSingle class now except for servo_rsc which was unused
 2016-04-01 11:59:30 +09:00
Leonard Hall 6c40d6f774 Copter: remove single frame's servo objects 2016-04-01 11:59:30 +09:00
Leonard Hall 44180e44df Copter: remove coax servo objects 
servos moved to AP_MotorsCoax class
 2016-04-01 11:59:30 +09:00
Leonard Hall a00a9601a4 Copter: AP_MotorsCoax now uses 4 servos 2016-04-01 11:59:30 +09:00
Andrew Tridgell f19922fec5 Copter: added LAND_SPEED_HIGH parameter 
this is the descent rate for the first part of a landing. Separating
this from WPNAV_SPEED_DN allows for independent tuning of fast fwd
flight from landings
 2016-03-30 15:54:20 +11:00
Lucas De Marchi e88ba38595 ArduCopter: replace header guard with pragma once 2016-03-16 18:40:44 +11:00
Paul Riseborough a7b69366a1 Copter: Add flight mode for throw launch 
The is commit adds a new flight mode called 'Throw' to Copter that enables the copter to be thrown into the air to start motors. This mode can only be netered when the copters EKF has a valid position estimate and goes through the following states

Throw_Disarmed - The copter is disarmed and motors are off.
Throw_Detecting - The copter is armed, but motors will not spin unless THROW_MOT_START has been set to 1. The copter is waiting to detect the throw. A throw with an upwards velocity of at least 50cm/s is required to trigger the detector.
Throw_Uprighting - The throw has been detected and the copter is being uprighted with 50% throttle to maximise control authority. This state transitions when the copter is within 30 degrees of level.
Throw_HgtStabilise - The copter is kept level and height is stabilised about the target height which is 3m above the height at which the throw release was detected. This state transitions when the height is no more than 0.5m below the demanded height.
Throw_PosHold - The horizontal motion is arrested and the copter is kept at a constant position and height.
 2016-03-03 12:18:13 +09:00
Jonathan Challinger 3800c66f07 Copter: add RTL_CONE_SLOPE 2016-01-07 17:22:33 +09:00
Andrew Tridgell 5c94b61f49 Copter: support up to 14 input channels for all boards 2016-01-04 08:22:51 +11:00
Randy Mackay 1155b1f557 Copter: remove precision landing PI controller 
This controller has been moved into the precision landing class
 2015-12-31 15:30:36 +09:00
pepevalbe 3b3205304b Copter: added group parameter for AP_Notify library 2015-12-31 11:33:08 +09:00
Peter Barker f57d237181 Copter: support multiple simultaneous backends 2015-12-03 13:21:51 +11:00
Tom Pittenger 34d6d985e9 Copter: Add support for ADS-B 2015-11-27 15:02:15 +09:00
Jonathan Challinger 5086168b03 Copter: add RTL_SPEED parameter 2015-11-16 10:20:32 +09:00
Robert Lefebvre 5cc4f41d85 Copter: Helicopter: to use new Stab_Col and Acro_Col functions. 2015-11-12 19:37:23 +09:00
Robert Lefebvre 34fb600c4f Copter: Utilize Input Manager Class 2015-11-12 19:37:22 +09:00
Andrew Tridgell 053194fd51 Copter: added EK2_* parameters and EKF2 instance 2015-09-23 11:56:33 +10:00
Randy Mackay 7db77482f5 Copter: precision landing velocity PI object 
Follow up changes required to actually use this PI during landing
 2015-08-31 18:00:32 +09:00
Randy Mackay 26ded641db Copter: integrate Precision Landing lib 2015-08-31 18:00:28 +09:00
Robert Lefebvre 990761a13b Copter: Create new heli RSC RC Channel object. 2015-08-31 11:27:50 +09:00
Andrew Tridgell ff934d5bca Copter: added FS_CRASH_CHECK parameter 
this allows automatic crash detection to be disabled
 2015-08-31 12:15:46 +10:00
Andrew Tridgell 90909f2b4a Copter: added DISARM_DELAY parameter 
this allows automatic disarming to be disabled, or set to a shorter or
longer time as appropriate for the user
 2015-08-31 11:44:08 +10:00
Stewart Loving-Gibbard 7cb494d8e2 Copter: Moving to RSSI library for reading various kinds of RSSI, with the possibility of adding more. 
* Retains ability to read from Analog Pin
* Adds ability to read RSSI from PWM channel value as is done in OpenLRSng, EazyUHF, and various other LRS.
* Handles any type of RSSI that provides RSSI values inverted - i.e. when the low value is the best signal and the high value is the worst signal.
* Has different key names from all existing RSSI parameters to provide for a clean break and easier distinguishing.
* Existing parameters are marked as obsolete
 2015-08-29 08:05:59 +10:00
Randy Mackay a10a74d498 Copter: AUTOTUNE_MIN_D param to allow controlling minimum D 2015-08-23 14:56:39 +09:00
Andrew Tridgell 1fdf7ec83f Copter: added RPM sensor support 
send result via MAVLink
 2015-08-12 15:03:50 +10:00
Gustavo Jose de Sousa 4d4b856735 ArduCopter: standardize inclusion of libaries headers 
This commit changes the way libraries headers are included in source files:

 - If the header is in the same directory the source belongs to, so the
 notation '#include ""' is used with the path relative to the directory
 containing the source.

 - If the header is outside the directory containing the source, then we use
 the notation '#include <>' with the path relative to libraries folder.

Some of the advantages of such approach:

 - Only one search path for libraries headers.

 - OSs like Windows may have a better lookup time.
 2015-08-11 16:28:40 +10:00
Randy Mackay 063faa0383 Copter: add RTL_CLIMB_MIN 
Vehicle climbs at least this many cm when entering RTL
 2015-07-13 20:38:52 +09:00
Randy Mackay f93a259b04 Copter: add comment to Solo section in Parameters.h 2015-06-14 14:47:02 +09:00
Jonathan Challinger fd37a48f8e Copter: clean up Parameters.h comments a bit 2015-06-14 14:44:15 +09:00
Jonathan Challinger 035c0b567e Copter: reserve param indices that exist in Solo repo 2015-06-14 14:44:13 +09:00
Randy Mackay aa05325b54 Copter: add althold as ekf failsafe action 2015-06-10 12:06:08 +09:00
Randy Mackay 4408f01f39 Copter: rename ekf_check_thresh to fs_ekf_thresh 2015-06-10 12:06:06 +09:00
Andrew Tridgell 1792710f41 Copter: added a bit in LOG_BITMASK for PID logging 2015-05-27 15:09:47 +10:00
Andrew Tridgell 22524daf5f Copter: added GCS_PID_MASK for mavlink rate tuning 2015-05-27 14:28:46 +10:00
Robert Lefebvre 575a5ad619 Copter: Set better default Rate PIDs for TradHeli 2015-05-22 09:38:26 +09:00
Randy Mackay d8b7e4a199 Copter: add support for 4th mavlink channel 2015-05-15 15:07:27 +09:00
Jonathan Challinger 73d961cebc Copter: mavlink initiated takeoff in alt-hold modes 
adds PILOT_TKOFF_ALT for target altitude above home in cm for pilot initiated takeoff
 2015-05-01 12:56:18 +09:00
Jonathan Challinger b10cf0f38a Copter: pre-takeoff throttle for sprung throttle sticks 
Adds PILOT_THR_BHV, PILOT_TKOFF_DZ parameters
 2015-05-01 12:56:16 +09:00
Jonathan Challinger 91a03ae0e7 Copter: add PILOT_THR_FILT and call set_throttle_out functions with that value 2015-04-16 21:00:11 +09:00
Randy Mackay 74b98b89d0 Copter: remove dcm check 2015-03-27 00:04:37 -07:00
Robert Lefebvre a5af151a91 Copter: Initial expansion of Aux Switch to Ch7-12 2015-03-17 21:18:41 +09:00
Randy Mackay b10730f35c Copter: remove THR_MAX parameter 2015-03-16 14:49:34 +09:00
Randy Mackay fbfc94cf69 Copter: remove GPS glitch and failsafe 
The EKF failsafe now captures all failures that could lead to a bad
position including GPS glitches and a bad compass meaning we do not need
this protection in the main flight code.
 2015-03-13 16:40:46 +09:00
Randy Mackay 6f6847c025 Copter: use only InertialNav_EKF 
remove calls to unsupported functions including ignore_next_error,
set_altitude, etc.
 2015-03-13 16:40:37 +09:00
Randy Mackay d7f624be39 Copter: remove baro_glitch protection 2015-03-13 16:40:27 +09:00
Andrew Tridgell 3f906f6bd1 Copter: added CLI_ENABLED option 2015-03-09 17:58:37 +11:00
Leonard Hall d5bbe6de03 Copter: remove TRIM_THROTTLE 
throttle_trim is replaced by throttle_average which is initialised to
the throttle_mid parameter value at startup
 2015-03-06 14:02:19 +09:00
Leonard Hall c78480e14f Copter: rename loiter_pos to pos_xy 
Also renamed throttle_rate to vel_z, throttle_accel to accel_z
 2015-03-06 14:02:17 +09:00
Leonard Hall e232867661 Copter: move LOITER_RATE to 2-axis PI controller 
Also rename LOITER_RATE to VEL_XY for parameters, definitions, variables
 2015-03-06 14:02:15 +09:00
Leonard Hall 2b0fb45fe8 Copter: integrate PID input filter 2015-03-06 14:02:11 +09:00
Leonard Hall a9a6e8856b Copter: add AUTOTUNE_AGGR parameter 2015-03-06 14:02:02 +09:00
Leonard Hall 864168e5ea Copter: add AUTOTUNE_AXES bitmask parameter 
This is used to allow tuning just some axis
 2015-03-06 14:02:01 +09:00
Randy Mackay 34503de18e Copter: integrate SerialManager 
Remove serial0, serial1 baud and protocol parameters
Pass serial_manager to GCS, GPS, mount, FrSky_telem objects during init
call SerialManager init_console on startup
use SerialManager's set_block_writes_all
 2015-01-29 14:05:14 +11:00
Randy Mackay d26fa6d827 Copter: minor format fix 
no functional change
 2015-01-07 11:58:23 +09:00
Robert Lefebvre e10e020062 Copter: Add Landing Gear functionality to main code 2015-01-07 11:58:16 +09:00
Randy Mackay b6bcf841e1 Copter: remove second camera mount 2014-12-16 21:26:20 +09:00
Randy Mackay 67fdfffc2a Copter: remove OF_Loiter PIDs and tuning 2014-12-08 14:58:18 +09:00
Andrew Tridgell c3d839456b Copter: support logging while disarmed 2014-10-17 16:29:59 +09:00
Randy Mackay b0e6931ab0 Copter: add DCM_CHECK_THRESH parameter 2014-10-16 17:22:11 +09:00
Randy Mackay 765ce2f6ca Copter: optflow parameters moved to optflow class 2014-10-15 16:35:36 +09:00
Randy Mackay cf98cc29b5 Copter: throttle deadzone parameter 
Allows increasing or decreasing the deadband size in AltHold, Loiter,
PosHold flight modes
 2014-08-29 15:54:34 +09:00
Randy Mackay f3fd79597f Copter: add ACRO_EXPO parameter 2014-08-14 11:47:37 +09:00
Randy Mackay b52f8351e8 Copter: rename EKFCHECK_COMPASS to EKFCHECK_THRESH 
Renamed because this threshold is now used for both compass and velocity
variance.
Also minor reorganisation of ekfcheck but no functional change.
 2014-07-31 22:58:43 +09:00
Andrew Tridgell 3ccac6736d Copter: rename TELEM2_PROTOCOL to SERIAL2_PROTOCOL 
this matches SERIAL2_BAUD
 2014-07-30 14:49:10 +10:00
Matthias Badaire 147e91877e Copter: Add SERIAL2_PROTOCOL for GCS and FRsky telemtry 
this allows selection of protocol type on telem2. The default is
MAVLink, but can be selected as FrSky protocol
 2014-07-29 17:08:19 -07:00
Randy Mackay 7cc1501dc6 Copter: integrate baro glitch protection 2014-07-28 22:16:20 +09:00
Andrew Tridgell 0562907d9f Copter: added AP_Terrain library 2014-07-24 21:46:06 +10:00
Randy Mackay a4a4334b13 Copter: add EKFCHECK_COMPASS parameter 2014-07-22 23:13:22 +09:00
Randy Mackay 65e5367619 Copter: rename hybrid to poshold 2014-07-11 14:09:01 +09:00
Andrew Tridgell a4b9b989b7 Copter: convert to new AP_RangeFinder API 2014-07-08 15:08:18 +10:00
Jonathan Challinger 5b36e65cb9 Copter: Add parameter LAND_REPOSITION to enable/disable user input during auto-mode landings and descents 2014-07-06 19:20:25 +09:00
Robert Lefebvre 5ee87f7561 Copter: Change TradHeli to use new AC_HELI_PID class. 2014-05-29 17:39:04 +09:00
Andrew Tridgell cc6fba4cad Copter: change baudrates parameters to 16 bit 2014-05-21 12:45:25 +10:00
Randy Mackay a4c675c23e Copter: add PILOT_ACCEL_Z parameter 
Allows configurable z-axis acceleration when pilot is controlling
altitude
 2014-04-30 21:46:13 +09:00
Randy Mackay f467d7bc20 Copter: add Hybrid parameters 2014-04-23 14:59:25 +09:00
Andrew Chapman fa3732ac6d Copter: integrate AP_Rally 2014-04-19 15:00:23 +09:00
Randy Mackay 037a0b4e5a Copter: dos2unix Parameters.h 2014-04-08 23:30:15 +09:00
Emile Castelnuovo 9e31f032c2 Copter: added VRBRAIN board #includes and #defines 2014-04-08 16:19:20 +10:00
Randy Mackay ff32b27272 Copter: integrate parachute lib 2014-04-07 13:36:44 +09:00
Andrew Tridgell 852cdbaa7c Copter: added GPS parameters 2014-04-01 06:38:25 +11:00
Andrew Tridgell c0767eebff Copter: support 14 RC channels on PX4 2014-03-25 14:47:05 +11:00
Randy Mackay 1bad6a4b15 Copter: add AP_Mission object parameter 
Remove global command_total and command_index parameters
 2014-03-19 12:10:01 +09:00
Randy Mackay d992483bf5 Copter: add EKF params to full param list 2014-02-21 13:51:22 +09:00
Randy Mackay 00913ffe1b Copter: throttle rate to simple P controller 
Saves at least 15bytes of RAM
 2014-02-16 13:35:40 +11:00
Randy Mackay aab9b30bf6 Copter: replace APM_PI with AC_P 
Saves about 90bytes of RAM
 2014-02-15 06:09:08 +11:00
Randy Mackay 3e399fd830 Copter: remove unused parameters 2014-02-15 05:27:46 +11:00
Randy Mackay 3b9ae02966 Copter: add Circle parameter 2014-02-15 05:27:40 +11:00
Randy Mackay 784f7385b5 Copter: add attitude and pos control params 2014-02-15 05:27:35 +11:00
Randy Mackay 7b9a48107e Copter: move angle_max parameter to AP_Vehicle 2014-02-15 05:27:32 +11:00
Randy Mackay 2219f21744 Copter: add RC_FEEL_RP parameter 
Values from 0 ~ 100 control amount of filtering on roll and pitch input.
100 = no filter so crisp feel, 0 = a lot of filtering so very sluggish
response
 2014-02-12 16:28:41 +09:00
Randy Mackay 5d929351ca Copter: removed unused servo3, servo4 from coax 2014-02-07 12:36:17 +09:00
Dneault f48e106271 Copter: add coax heli support 
Motors should be attached to RCOutputs 1 and 2, Flaps should be connected
to RC outputs 3 and 4
 2014-02-07 12:36:04 +09:00
Andrew Tridgell 50a90a1043 Copter: enable AP_BoardConfig 2014-01-20 17:06:28 +11:00
Lukasz cb17a5bdb6 Copter: Add RSSI_RANGE parameter 
Added ability to rescale rssi input voltage. Useful for receivers like
FrSky which have 3.3V output.
 2013-12-17 22:38:39 +09:00
ctech4285 2b5d8aa5b7 Copter: integrate EPM library 2013-12-17 15:36:42 +09:00
Andrew Tridgell 28d98414e7 Copter: fixed some build warnings 2013-12-11 10:21:20 +11:00
Randy Mackay 59cea4b88c Copter: remove CopterLED from main code 2013-11-30 18:20:55 +09:00
Andrew Tridgell 9c812d5028 Copter: added SERIAL2_BAUD and rename SERIAL3_BAUD to SERIAL1_BAUD 2013-11-26 13:05:32 +11:00
Andrew Tridgell a49710f20e Copter: added uartD support 
this also brings GCS_Mavlink.pde closer to the plane implementation
 2013-11-26 13:05:32 +11:00
Randy Mackay ed9f369492 Copter: shorten g.arming_check_enabled variable 
g.arming_check_enabled shortened to g.arming_check
 2013-11-25 17:23:39 +09:00
Randy Mackay c9c803ffd4 TradHeli: move STAB_COL_MIN to main parameter list 2013-11-15 22:58:32 +09:00
Randy Mackay 159d6320bf Copter: move SINGLE parameters to start at 75 2013-11-12 23:40:38 +09:00
ssq870424 07d3f2a3c5 Copter: add support for singlecopter airframe 
this is the newest singlecopter airframe programme.
This kind of aerial vehicles include Honeywell T-hawk and Goldeneye.
 2013-11-12 23:40:27 +09:00
Jason Short c3aa56459a Copter: remove unused Toy param 2013-11-02 21:34:50 +09:00
Randy Mackay 97770ae352 Copter: rc10, rc11 available even without MOUNT 2013-10-31 22:55:02 +09:00
Randy Mackay 8386b658e9 Copter: add ANGLE_RATE_MAX param 
Limits the maximum rotation rate requested by the angle controller which
is used in stabilize, loiter, rtl and auto flight modes
 2013-10-29 11:27:05 +09:00
Randy Mackay 8de6c34252 Copter: comments update for GPS_HDOP_GOOD parameter 2013-10-13 13:53:26 +09:00
Randy Mackay dab4f032f9 Copter: integrate BattMonitor 2013-10-03 11:16:28 +09:00
Randy Mackay 6c5294f89e Copter: integrate GPS_Glitch parameters 2013-09-24 21:41:45 +09:00
Randy Mackay d8eb7fb82f Copter: remove x100 from IMAX definitions 2013-08-19 22:38:34 +09:00
Randy Mackay d000967a76 Copter: pre-arm check for gps hdop < 2 2013-08-15 13:06:36 +09:00
Randy Mackay 6969ab573d Copter: configurable max lean angle 
ANGLE_MAX parameter allows limiting the roll and pitch angles during
manual and auto flight modes to anywhere from 10 to 80 degrees
 2013-08-11 12:53:22 +09:00
Randy Mackay 74fb500efe Copter: integrate AC_Sprayer 2013-08-05 21:12:23 +09:00
Randy Mackay 49dbdce89c Copter: split ACRO_P into ACRO_RP_P and ACRO_YAW_P 2013-08-05 21:05:00 +09:00
Randy Mackay 82082e044c Copter: remove ACRO's axis enabled parameter 
Acro is now body frame (with earth frame leveling) while Sport is earth
frame acro
 2013-08-05 21:04:57 +09:00
Randy Mackay 21e523b9ac Copter: Acro trainer separated into limited and leveled 2013-08-05 21:04:53 +09:00
Randy Mackay aefb38e486 Copter: remove param to disable accel based throttle controller 2013-07-12 22:57:30 +09:00
Randy Mackay 404cd5f3da Copter: rename g.pid_throttle to g.pid_throttle_rate 
Small code clean-up to make throttle rate controller's pid more obvious
 2013-06-30 00:04:21 -10:00
Andrew Tridgell 23eade8f74 Copter: enable RELAY_* parameters 2013-06-25 12:46:53 +10:00
Randy Mackay 213eaa8db6 Copter: integrate draft RCMapper 2013-06-03 16:23:47 +10:00
Randy Mackay 5ee68db6f0 TradHeli: add parameter descriptions 
small formatting changes too
 2013-05-21 15:33:41 +09:00
Randy Mackay bd44c2f73d Copter: all pre-arm checks to be disabled 
set ARMING_CHECK parameter to zero to disable
 2013-05-20 14:48:04 +09:00
Randy Mackay 9fdab5e8fe Copter: remove unused AUTO_SLEW_RATE parameter 2013-05-17 16:09:17 +09:00
Randy Mackay 38239c652a Copter: ch8 aux switch 
Ch8 can be used as an aux switch like ch7.  Has all the same options as
ch7 and there is a safety check to ensure both switches aren't set to
the same function so as to avoid interfering with each other
 2013-05-17 14:42:28 +09:00
Randy Mackay bab9fa25e5 Copter: add GCS failsafe 2013-04-29 21:30:22 +09:00
Randy Mackay c232d7af4b Copter: correct fence parameter 2013-04-27 11:14:11 +09:00
Randy Mackay 58d1da2d80 Copter: integrate AC_Fence in place of limits 
Lesser functionality than limits but saves more than 150 bytes and it
works
 2013-04-27 11:14:07 +09:00
Andrew Tridgell 300a8d2bbc Copter: support all 12 channels on PX4 
last 4 channels are on the FMU pins
 2013-04-25 20:10:53 +10:00