Andrew Tridgell
ba21c1e67d
Copter: set RC_SPEED default to 16kHz for brushed
2017-06-17 17:37:45 +10:00
Peter Barker
4163455d97
Copter: stop using in_mavlink_delay as a proxy for disabling logging
2017-06-16 17:07:48 +01:00
Peter Barker
cb41f09d2e
Copter: call dataflash should_log method
2017-06-16 17:07:48 +01:00
Randy Mackay
cb77c1acc9
Copter: 3.5.0-rc8 release notes
2017-06-15 13:48:44 +09:00
Peter Barker
019dd02569
Copter: simplify dataflash initialisation
2017-06-14 12:20:29 +01:00
Shingo Matsuura
0800c6be52
Copter: add beacon object to avoidance object
2017-06-14 16:07:32 +09:00
Randy Mackay
a5ea9420c0
Copter: landing gear position set less often
...
This change means no pwm output is sent to the landing gear servos until the pilot has moved the switch
2017-06-13 13:56:07 +09:00
Peter Barker
3ee56f5475
Copter: StartUnstartedLogging replaces logging_started/start_logging
2017-06-11 20:34:12 +01:00
Peter Barker
43a16b9327
Copter: simplify should_log (NFC)
2017-06-11 20:34:12 +01:00
Peter Barker
d36e8fa51e
Copter: eliminate calls to manipulate _writes_enabled
2017-06-11 20:34:12 +01:00
Peter Barker
2bb22da599
Copter: simplify start_logging
2017-06-11 20:34:12 +01:00
Pierre Kancir
d5cc1e64ed
GCS_Common: rename send_rangefinder to send_rangefinder_downward
2017-06-08 01:32:04 +01:00
Pierre Kancir
73038a0e09
ArduCopter: GCS_mavlink style correction
2017-06-08 01:31:52 +01:00
Pierre Kancir
ac0a300415
ArduCopter: correct msg send by proximity
2017-06-08 01:31:52 +01:00
Pierre Kancir
261eb387eb
ArduCopter: change rangefinder msg for common one
2017-06-08 01:31:43 +01:00
Pierre Kancir
156863d10a
ArduCopter: add DISTANCE_SENSOR support
2017-06-08 01:22:07 +01:00
Peter Barker
758414cfe5
Copter: allow mavlink messages to be exchanged on failed boot
2017-06-07 12:56:46 +01:00
Randy Mackay
cb76bd8f3d
Copter: compass set-initial-location uses ahrs location
...
Previously it could attempt to use a gps location even if gps was not being used
Also compass-accumulate moved to sensors.cpp
2017-06-07 13:01:38 +09:00
Randy Mackay
814cadac68
Copter: consolidate set_home functions
...
added lock argument instead of having twice as many functions
no functional change
2017-06-07 13:01:38 +09:00
Randy Mackay
ec491d3c6b
Copter: init_compass get g.compass_enabled check
...
No functional change
2017-06-07 10:34:13 +09:00
Leonard Hall
8def1d257e
Copter: pass battery resistance estimate to motors
2017-06-06 14:57:04 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
f8aa91681e
Copter: Improve the PWM parameters descriptions
2017-06-06 11:06:26 +10:00
Randy Mackay
010dc103be
Copter: increase RC input deadzones for roll pitch and yaw
...
Copter-3.5 testing resulted in a significant number of users reporting various issues like poshold and autotune were not functioning because their RC inputs were straying out of the deadzones
2017-06-01 10:10:57 +09:00
Leonard Hall
c61d0a7373
Copter: reduce RC_FEEL default to 25
2017-06-01 10:06:20 +09:00
murata
1a76c28655
Copter: add dodeca-hexa
2017-05-27 14:21:13 +09:00
Randy Mackay
70ed572476
Copter: minor formatting fix
...
This is mostly just to trigger compilation of the latest beta
2017-05-25 17:53:20 +09:00
Randy Mackay
5f0214dd41
Copter: update AC3.5.0-rc7 release notes
2017-05-25 13:29:35 +09:00
Randy Mackay
9002a635e2
Copter: 3.5.0-rc7 release notes
2017-05-25 13:29:33 +09:00
Paulo Neves
9c6a7c170f
Copter: Add MAV_CMD_DO_SET_CAM_TRIGG_DIST support
2017-05-25 09:35:22 +09:00
Michael du Breuil
6ba53cf11c
Copter: Ignore Landing message
2017-05-24 15:22:27 -07:00
Randy Mackay
a77f21da4a
Copter: sport and acro trainer limits based on target attitude
...
previously the trainer used the vehicle's actual attitude meaning that the target could get far past the limits if there was an attitude error
2017-05-23 19:44:52 +09:00
Randy Mackay
a0c5ac1949
Copter: fix compassmot for oneshot ESCs
2017-05-23 13:11:46 +09:00
Andrew Tridgell
c459a25194
Copter: adjust autotune poshold
...
only reset position on pitch or roll input
also increases the max angle error for twitching in autotune. When a
vehicle is not well tuned the limit can prevent twitching
2017-05-23 09:41:11 +09:00
Randy Mackay
010665f915
Copter: fix esc calibration for one-shot
...
the cork and push need to be done from the vehicle level
2017-05-23 07:57:17 +09:00
Randy Mackay
b4d7d4f43f
Copter: resolve compiler warnings in autotune GCS messages
2017-05-22 12:34:06 +09:00
Peter Barker
d5afd01ef2
Copter: remove duplicate autotune rotation warning
2017-05-18 16:28:00 +09:00
Randy Mackay
ca8ae06bba
Copter: minor format fix to landing-gear update function
2017-05-18 12:26:19 +09:00
Peter Barker
34eae9d9cb
Copter: AutoTune: include axis being tuned in output
2017-05-18 09:36:00 +09:00
Peter Barker
0bc17645fb
Copter: AutoTune: add gcs messages detailing wait-for-level state
2017-05-18 09:36:00 +09:00
Peter Barker
586a5df814
Copter: add GCS messaging during autotune
2017-05-18 09:36:00 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
f366095113
Copter: Use SI units conventions in parameter units
...
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas
60aeade0f4
Copter: Add missing @RebootRequired: True
2017-05-15 21:51:16 +09:00
Randy Mackay
376b9e994f
Copter: AC3.5-rc6 release notes
2017-05-15 15:04:28 +09:00
Randy Mackay
91d4b4777b
Copter: respond to param list request after motor init
2017-05-15 14:13:43 +09:00
Pierre Kancir
436d0f8c84
ArduCopter: radio fix passthrough range on heli/coax/single
2017-05-13 10:19:20 +09:00
Randy Mackay
caa2148e45
Copter: move esc calibration startup check to after servo function initialisation
2017-05-11 11:30:05 +09:00
Randy Mackay
0e7f12049c
Copter: fix esc calibration is safety switch has been disabled
2017-05-11 11:30:05 +09:00
Randy Mackay
f9c8bb1b01
Copter: ensure esc calibration only occurs on next reboot
...
It was possible for a board with no safety switch attached to get stuck waiting for the user to press the non-existance switch. Rebooting now resolves the problem because the ESC_CAL parameter is reset to zero regardless of whether the calibration completes or not.
2017-05-11 11:30:05 +09:00
Randy Mackay
a3450a955d
Copter: fix LED notify during auto esc calibration
2017-05-11 11:30:05 +09:00
karthik.desai
d7976078a5
Copter: fix typo in comments
2017-05-08 10:08:31 +09:00
