Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
3,320 Commits 71 Branches 509 Tags 790 MiB
Commit Graph

1190 Commits

Author SHA1 Message Date
Mike Smith d79f62ce66 Teach the Makefile about the new Arduino sourcefile suffix 2012-01-15 11:51:38 -08:00
Jason Short e68f9191c9 updated channel notes 2012-01-15 10:24:15 -08:00
Andrew Tridgell 817e7442bd baro: fixed an integer overflow issue at high altitudes 
the averaging array was using 16 bit numbers, but we are storing
numbers with 19 significant bits. That caused overflow at high
altitude, and some very interesting altitude graphs!

Thanks to Michael Oborne for spotting this in a log
 2012-01-14 19:51:35 +11:00
Randy Mackay 4e9c668315 OpticalFlow - bug fix - highest resolution was incorrectly set as 1200 instead of 1600 2012-01-14 12:34:29 +09:00
Andrew Tridgell f4490b62c7 DCM: prevent a segmentation fault when compass is not enabled 
when compass is disabled _compass is NULL
 2012-01-13 15:48:07 +11:00
Doug Weibel 622217357c Bug fix for compass. 
This is a fix for an interesting bug when a DCM matrix reset was added to the ground start.  This bug only showed up if (A) a ground start were performed after an air start or due to use of the "Calibrate Gryo" action, (B) if the current orientation were sufficiently different from 0/0/0, and (C.) if the particular magnetometer had sufficiently large offsets.  Why did resetting the DCM matrix to 0/0/0 pitch/roll/yaw at ground start cause a bug?  The magnetometer offset nulling determines the proper offsets for the magnetometer by comparing the observed change in the magnetic field vector with the expected change due to rotation as calculated from the rotation in the DCM matrix.  This comparison is made at 10Hz, and then filtered with a weight based on the amount of rotation to estimate the offsets. Normally it would take considerable time at normal in-flight rotation rates for the offset estimate to converge. 

If a DCM matrix reset occurs when the offset nulling algorithm is up and running, the algorithm sees the DCM reset as a instantaneous rotation, however the magnetic field vector did not change at all.  Under certain conditions the algorithm would interpret this as indicating that the offset(s) should be very large.  Since the "rotation" could also have been large the filter weighting would be large and it was possible for a large erroneous estimate of the offset(s) to be made based on this single (bad) data point.

To fix this bug methods were added to the compass object to start and stop the offset nulling algorithm.  Further, when the algorithm is started, it is set up to get fresh samples.  The DCM matrix reset method now calls these new methods to stop the offset nulling before resetting the matrix, and resume after the matrix has been reset.
 2012-01-12 14:44:24 -07:00
Andrew Tridgell a6e87915eb desktop: floating point precision changes from Justin Beech 2012-01-11 21:31:59 +11:00
Jason Short f43c29e840 fixed type error 2012-01-10 23:43:44 -08:00
Jason Short ecaf5ac461 sensorSign swicth 2012-01-10 23:43:44 -08:00
Jason Short d7d04f67e4 AP Rangefinder had some bad characters in it. Converted and cleaned the text files. 2012-01-10 23:42:26 -08:00
Jason Short 9cbfcac802 Made timer unsigned 2012-01-10 23:42:26 -08:00
Pat Hickey d015e0d6d9 APM_RC & ArduCopter: Change interface to SetFastOutputChannels to use _BV 
* Every use of MSK_CH_n changed to _BV(CH_n)
* Easier to read, and will allow CH_n to be parameterized without needing
  a separate macro expansion for the MSK value.
 2012-01-09 21:57:01 -08:00
Doug Weibel 22d2db53d8 Repair dataflash test 2012-01-08 21:29:19 -07:00
Jason Short f6e268395f allows main code to manually set the integrator value 2012-01-04 09:28:36 -08:00
Andrew Tridgell 54b91ce2f4 sitl: added build targets for different ACM frames 2012-01-04 21:45:46 +11:00
Andrew Tridgell 7aa294eca2 AP_Compass: when I2c fails, don't retry for 1s 2012-01-04 16:35:47 +11:00
Andrew Tridgell a7a00a35ab AP_Baro: when I2c fails, don't retry for 1s 2012-01-04 16:35:16 +11:00
Andrew Tridgell 65fbeea6d1 DataFlash: cope with older dataflash chips 
some of the APM2 DataFlash cards use an older chip with only 4096
pages, and a density code of 6. Doug has one of these.
 2012-01-04 16:16:35 +11:00
Michael Oborne 6a279138e9 add gps character count. 
this problem happens when the mtk ends up in nmea mode at 10hz. there is no 50ms window of no activity
 2011-12-31 13:05:33 +08:00
Michael Oborne e66e21cf20 remove gps callback in wait loop 2011-12-31 09:35:40 +08:00
Randy Mackay 19ed12444b GPS - removed GPS_MTK, GPT_NMEA and GPS_UBLOX. All functionality moved to AP_GPS many months ago. 2011-12-30 22:25:00 +09:00
Jason Short 3878ac01ef removed newlines to clean up code 2011-12-29 23:02:01 -08:00
Randy Mackay ff66a3417c OptFlow - initial support for APM2 (there are still problems) including adding ability to set Chip Select pin. 
Other unrelated changes are:
a) fixed typo in 'esitmate_velocity' to 'estimate_velocity'.
b) moved init_compass from system.pde to sensors.pde which seemed consistent with other sensors.
 2011-12-30 12:06:31 +09:00
Andrew Tridgell 671d0b82ad Baro: fixed MS5611 example sketch 2011-12-28 21:49:29 +11:00
Andrew Tridgell 5f0e070f4e compass: show timing in compass test 2011-12-28 21:44:18 +11:00
Andrew Tridgell c448e85ed1 Baro: show timing in baro test 2011-12-28 21:43:52 +11:00
Andrew Tridgell 669a129175 DCM: don't use compass unless its healthy 2011-12-28 20:41:54 +11:00
Andrew Tridgell 603b605eb1 I2C: fixed some warnings 2011-12-28 20:41:53 +11:00
Andrew Tridgell f4e1f3d54d desktop: exclude I2C library 2011-12-28 20:41:53 +11:00
Andrew Tridgell 9ef1c421bd MPU6k: don't init the Wire library 
we don't use Wire any more
 2011-12-28 20:41:53 +11:00
Andrew Tridgell 2960abf41f I2C: convert barometer library to new I2C library 
this also adds a healthy attribute and error checking
 2011-12-28 20:41:53 +11:00
Andrew Tridgell f93c716126 I2C: convert compass code to new I2C library 
this also adds a healthy attribute, and error checking on all I2C
calls
 2011-12-28 20:41:53 +11:00
Andrew Tridgell 632e74b76d I2C: imported the I2C library from Wayne Truchsess 
this gives us a more robust interface, including timeouts
 2011-12-28 20:28:31 +11:00
Andrew Tridgell f8e1d88815 TimerProcess: prevent a race in setting up the timer callbacks 2011-12-28 16:00:49 +11:00
Andrew Tridgell 089470a671 DataFlash: moved high level logging logic to library 
this moves out all the high level logic from ArduPlane/ArduCopter to
the library. It also adds a "config page", as the last page in the
flash. This is used to check if the flash needs erasing. We only erase
now if the DF_LOGGING_FORMAT has changed.

This patch also adds a public CardInserted() method, which is used to
disable logging on APM2 if a dataflash card is not inserted
 2011-12-28 16:00:48 +11:00
Andrew Tridgell 42eb62cc46 DataFlash: fixed sense of card detect 2011-12-28 16:00:48 +11:00
Andrew Tridgell 1cb8728a6b MPU6000: protect the driver from double initialisation 
initialising twice can lockup the driver
 2011-12-28 16:00:48 +11:00
Andrew Tridgell f2bbfb1296 MPU6000: minor fixes 
the hardware functions should be private, and cs_pin should be uint8_t
 2011-12-28 16:00:48 +11:00
Andrew Tridgell d35113f8a6 TimerProcess: check for duplicate registrations 
if a driver gets initialised twice, make sure it doesn't get called
twice in the timer loop
 2011-12-28 16:00:48 +11:00
Andrew Tridgell 0a08a0b515 TimerProcess: make some variables uint8_t 
save a couple of bytes
 2011-12-28 16:00:48 +11:00
Mike Smith ac3f7512cc Fix issue #423 - FastSerial flush bug. 2011-12-26 15:52:21 -08:00
Andrew Tridgell 9f5718bcfa added in DataFlash.cpp 
forgot this ....
 2011-12-26 19:34:06 +11:00
Andrew Tridgell 887ff43e1f desktop: added attachInterrupt() support 2011-12-26 19:17:11 +11:00
Andrew Tridgell 22c8db774f desktop: fixed for new DataFlash inheritance 2011-12-26 19:17:11 +11:00
Andrew Tridgell dd26ef3089 dataflash: reworked classes to move most code to parent class 
this moves all the non-hardware specific code to the parent
DataFlash_Class class, keeping the hw specific code much smaller and
simpler.

This should prevent discrepancies creeping in between APM1 and APM2
support again
 2011-12-26 19:17:11 +11:00
Andrew Tridgell 8bf05982ae dataflash: fixed APM2 flash logging 
we had log wrap disabled on APM2, and also had the wrong log size. The
mainline code assumed 4096, but it is 8192 pages long.
 2011-12-26 19:17:11 +11:00
Andrew Tridgell df0d151891 MPU6000: change to 98Hz low pass filter 
based on recommendation from Pat
 2011-12-26 19:17:11 +11:00
Andrew Tridgell 3ef707a2c3 MPU6000: use data ready interrupt to prevent stale data 
We listen for a data ready interrupt and only read new data in read()
if there is new data
 2011-12-26 19:17:11 +11:00
Andrew Tridgell 71e08f8484 fixed the MPU6000 test sketch 2011-12-26 19:17:11 +11:00
Randy Mackay af121c492d Merge remote-tracking branch 'origin/master' 2011-12-25 12:34:16 +09:00
Randy Mackay c3ea1ca5dc AP_GPS - updated MTK rate to 10Hz and fixed lat/lon printing inaccuracy in Arducopter logs and AP_TEST example sketch 2011-12-25 12:33:06 +09:00
Andrew Tridgell 7c0f39aec5 added MPU6000 test sketch 
this doesn't work yet - Pat, any idea why?
 2011-12-25 12:03:39 +11:00
Andrew Tridgell 09c97bb367 removed dead test program 
this one doesn't build, and has been replaced by IMU_MPU6000_test
 2011-12-24 18:11:04 +11:00
Andrew Tridgell f587a01165 ADC: update for new ap_proceduce prototype 2011-12-21 23:31:38 +11:00
Andrew Tridgell 5b75458502 AP_Baro: update MS5611 driver for new ap_proceduce prototype 
this saves calling millis() quite so often
 2011-12-21 23:31:38 +11:00
Andrew Tridgell cef1c4c558 MPU6k: update driver for new ap_proceduce prototype 2011-12-21 23:31:38 +11:00
Andrew Tridgell 8cc2b7669b PeriodicProcess: added set_failsafe() call 
this adds an optional failsafe function that will be called in the
timer loop
 2011-12-21 23:31:38 +11:00
Andrew Tridgell 845683a56c added comment in polygon code 2011-12-21 23:31:38 +11:00
Andrew Tridgell eac625ba8f rollover is not a bug 
subtracting unsigned numbers does the right thing
 2011-12-21 23:31:38 +11:00
Andrew Tridgell eec5f000b5 added code format markers to AP_InertialSensor library 2011-12-21 23:31:38 +11:00
Andrew Tridgell 614aeb274c fixed build of IMU_MPU6000_test 2011-12-21 23:31:38 +11:00
Andrew Tridgell b52cd45670 fixed comment 2011-12-19 20:52:59 +11:00
Andrew Tridgell 7c9c26e2b7 AP_Math: re-work polygon algorithm for perfect precision 
using sign checking and 64 bit integer math only when needed results
in an algorithm that is just as fast as the floating point version,
but has perfect results for any representable lat/lng
 2011-12-19 18:52:56 +11:00
Randy Mackay a51e868766 AP_RangeFinder - change sonar example sketch to use default Sonar PIN for APM2 (A1) 2011-12-18 14:15:50 +09:00
Andrew Tridgell 7442ba31d8 polygon: improve the speed and precision of the polygon algorithm 
now takes 156 usec per test, with a 11 point boundary
 2011-12-18 12:59:50 +11:00
Michael Oborne 3848f2094e make file relax 2011-12-17 20:42:51 +08:00
Michael Oborne fd35ba5976 add relax 2011-12-17 16:53:14 +08:00
Andrew Tridgell 0c8c707980 AP_Baro: fixed temperature on MS5611 
this caused a 2x scaling of altitude
 2011-12-17 14:58:58 +11:00
Andrew Tridgell 3654c714e9 Revert "ADC: only read channels that are actually being used" 
This reverts commit 95e6bb26f4772ca8c7faa62215de6f078d3df3c7.

ADC will be disabled on APM2
 2011-12-17 07:29:09 +11:00
Andrew Tridgell c18ad75504 Revert "ADC: added an enable_channel() API" 
This reverts commit dafeac01d8f14162600cf821404ba4072dcae14d.

ADC will be disabled on APM2
 2011-12-17 07:29:09 +11:00
Andrew Tridgell f6a7ad9fa6 Revert "ADC: fixed HIL build" 
This reverts commit 86c1a6a5fdd929516cf0f64f4d610cfcd4b4f774.

ADC will now be disabled on APM2
 2011-12-17 07:29:09 +11:00
Andrew Tridgell 7c939e83e0 AnalogSource: return a float from read() method 
this gives the full resolution when using the ADC backend. It also
adds scaling for the Arduino backend
 2011-12-17 07:29:09 +11:00
Andrew Tridgell 4bbd5392ef removed AperiodicProcess code 
this code was never being used, and was more complex than it was
worth.
 2011-12-17 07:29:09 +11:00
Andrew Tridgell 04ec569313 ADC: fixed HIL build 2011-12-16 20:58:04 +11:00
Andrew Tridgell 658d1d2ba3 added missing mavlink headers 2011-12-16 20:53:26 +11:00
Andrew Tridgell 1ab2b416a3 geofence: store fence points as int32_t 
this keeps maximum precision in fence boundaries
 2011-12-16 20:11:51 +11:00
Andrew Tridgell 2e2b320560 mavlink: include latest geofence message changes 2011-12-16 20:11:51 +11:00
Andrew Tridgell 3ddfc6664a AP_Math: better polygon algorithm 
this one seems to do better with single precision floating point
 2011-12-16 20:11:51 +11:00
Andrew Tridgell 686f96414c MAVLink: update to latest mavlink XML 
this includes the geo-fencing messages
 2011-12-16 20:11:51 +11:00
Andrew Tridgell c56e5735c2 ADC: added an enable_channel() API 
enable_channel() must be used before the Ch6() method is called to
enable gathering of data on the required channels
 2011-12-16 20:09:40 +11:00
Andrew Tridgell be1ba5354e timer: enable interrupts during timer processing 
this prevents us losing serial bytes when we call sensor drivers that
take more than 100usec to read.

We also prevent timer recursion by re-enabling the timer after all
callbacks are complete
 2011-12-16 20:09:38 +11:00
Andrew Tridgell af7e34fcc1 ADC: only read channels that are actually being used 
on the APM2 we usually use none of the ADC channels, although we may
use the airspeed sensor. This change means we detect which channels
are being read, and only do the SPI transfers for those ones. That
saves us about 100usec per timer interrupt (ie. about 10% of our CPU)
 2011-12-16 20:09:35 +11:00
Andrew Tridgell 9e9b229a1d fixed formatting of ADC driver 
it was a nasty mix of DOS and UNIX
 2011-12-16 20:09:29 +11:00
Andrew Tridgell 5b4717ea55 timers: change to 1kHz timer by default 
we were using a 227Hz timer, which is far too slow
 2011-12-16 20:09:25 +11:00
Andrew Tridgell 6ad5df2958 desktop: fixed type of dword eeprom read 2011-12-16 20:09:18 +11:00
Andrew Tridgell 338fb1642a AP_Math: make out vector and matrix elements used types with fixed sizes 
this prevents differences between CPU types
 2011-12-16 20:09:11 +11:00
Pat Hickey 291aaffdd9 APM_RC_APM2: Remove OutputCh from ::Init() 
* These calls were off by one anyway, by using the channel numbers
  as ints ant not CH_n macros, and that caused an ESC cal problem.
 2011-12-15 13:47:43 -08:00
Andrew Tridgell f4bd3cb5a2 AP_Math: added Polygon_complete() function 
used to veryify user supplied boundaries
 2011-12-15 14:42:34 +11:00
Andrew Tridgell cd9fb3c47a AP_Math: added a Polygon_outside() function 
this tests if a point is outside of a polygon. This will be used as
part of our geo-fencing support, and also for a new 'fenced mode'
 2011-12-15 14:34:58 +11:00
Andrew Tridgell 621f21e4f5 DCM: added matrix_reset() method 2011-12-13 21:32:50 +11:00
Andrew Tridgell 919ae17473 IMU: abstract the setting of the LEDs in IMU initialisation 
we need this to cope with different LED pin assignments on APM1/APM2
 2011-12-13 18:19:12 +11:00
Andrew Tridgell 9548366a91 autotest: make magnetic field point down 2011-12-12 22:14:01 +11:00
Andrew Tridgell fa83de98c8 desktop: fixed build with new AP_Baro code 2011-12-12 15:14:55 +11:00
Andrew Tridgell eaf134e47e desktop: fixed desktop barometer code 2011-12-12 15:14:55 +11:00
Andrew Tridgell de5c1c5147 barometer: fixed HIL barometer build 2011-12-12 15:14:55 +11:00
Andrew Tridgell 47da2ec992 ADC: change adc.Ch() to return a float 
this gives us a bit more precision in airspeed measurement, and costs
us virtually nothing as we are converting to float immediately after
getting the value
 2011-12-12 15:14:55 +11:00
Andrew Tridgell 43a53aa303 dcm: fixed an uninitialised variable 
if no compass and not in motion the DCM we would multiply by an
uninitialised number
 2011-12-11 15:21:10 -08:00
Pat Hickey 5819f99986 AP_Baro_MS5611: Asynchronous operation, plus c++ style changes. 
Yeah, I know this was a big change to make all at once.
 2011-12-11 15:21:10 -08:00
Pat Hickey 3d882c4d49 AP_Baro : Add init( AP_PeriodicProcess * ) method to interface & implementations 
AP_Baro_MS5611 and AP_Baro_BMP085 implement the interface, with stubs only
 2011-12-11 15:21:10 -08:00
Pat Hickey d5386b8bb8 AP_Baro_BMP085: move apm2_hardware flag from init to constructor. 2011-12-11 15:21:10 -08:00