Andrew Tridgell
3b0bd67afb
HAL_ChibiOS: enable CAN on Pixhawk6
2019-07-08 12:19:20 +10:00
Siddharth Purohit
76ff347026
AP_UAVCAN: remove singleton interface from slcan_router
2019-07-08 12:18:29 +10:00
Siddharth Purohit
2f153a3577
HAL_ChibiOS: remove singleton interface from slcan_router
2019-07-08 12:18:29 +10:00
Siddharth Purohit
28288a7329
BoardConfig_CAN: remove singleton interface for slcan_router
2019-07-08 12:18:29 +10:00
Siddharth Purohit
7c00aa6477
modules: update ChibiOS
2019-07-08 12:18:29 +10:00
Siddharth Purohit
3e194903cc
AP_UAVCAN: add Flow message to the sniffer test
2019-07-08 12:18:29 +10:00
Siddharth Purohit
67c925865c
HAL_ChibiOS: add support for CAN on STM32H7 boards
2019-07-08 12:18:29 +10:00
Siddharth Purohit
1cd8e0e237
BoardConfig: set slcan can port to 0 as default
...
This is to ensure that can bus filters are actually used
2019-07-08 12:18:29 +10:00
Siddharth Purohit
8de169b1ce
waf: remove redundant src includes for libuavcan drivers
2019-07-08 12:18:29 +10:00
Peter Barker
b123abbe90
AP_Notify: add SITL Notify display
2019-07-08 10:56:54 +10:00
Peter Barker
cd2ec1f57f
Copter: remove set_default_dead_zone statement with no effect
...
This is immediately undone in the unconditional code below the #if
2019-07-08 09:26:02 +09:00
Peter Barker
ebbd2b971b
Copter: correct compilation under toymode
2019-07-08 09:55:46 +10:00
Peter Barker
a61028c55d
AP_HAL_ChibiOS: disable scripting if USE_FATFS=no
2019-07-08 09:55:46 +10:00
Peter Barker
306783211b
Tools: waf: understand DISABLE_SCRIPTING from the board configuration
2019-07-08 09:55:46 +10:00
U-REDMOND\akolobov
6dd906f07f
HAL_SITL: Integrating Silent Wings SITL with the sim_vehicle
2019-07-08 09:32:59 +10:00
U-REDMOND\akolobov
3330b62d3c
SITL: aded support for SilentWings simulator
2019-07-08 09:32:59 +10:00
Randy Mackay
bd3d352554
AC_Avoidance: remove comment from Dijkstra's
2019-07-07 04:08:34 -07:00
Randy Mackay
655ddd4ab3
AC_Avoidance: Dijkstra's ignores invalid polygon fences
2019-07-07 04:08:34 -07:00
Randy Mackay
614b0f6dc8
AP_Math: Polygon_intersects handles unclosed polygons
2019-07-07 04:08:34 -07:00
Andrew Tridgell
7441dcddfa
Tools: updated IO firmware for IBUS support
2019-07-07 20:49:18 +10:00
PraiseSatan
bad5fb418d
AP_RCProtocol: added ibus RX support to recieve channel data from ibus transmitters.
2019-07-07 20:49:18 +10:00
Andrew Tridgell
92783bccfa
AP_NavEKF3: don't allow height datum reset when not on ground
2019-07-07 19:20:32 +10:00
Andrew Tridgell
e8d9a1fae9
AP_NavEKF2: don't allow height datum reset when not on ground
2019-07-07 19:20:32 +10:00
Andrew Tridgell
3f9e48951b
AP_NavEKF3: set terrainState to zero on height datum reset
2019-07-07 19:20:32 +10:00
Andrew Tridgell
f5fd38aef2
AP_NavEKF2: set terrainState to zero on height datum reset
2019-07-07 19:20:32 +10:00
Andrew Tridgell
f3fc910abe
AP_NavEKF3: continuously update gpsGoodToAlign
...
use it to determine how to handle a height datum reset
2019-07-07 19:20:32 +10:00
Andrew Tridgell
9372073f63
AP_NavEKF2: continuously update gpsGoodToAlign
...
use it to determine how to handle a height datum reset
2019-07-07 19:20:32 +10:00
Andrew Tridgell
b9a5794671
AP_NavEKF3: ensure that both AMSL and relative alt are correct after a reset
...
this forces the EKF origin to the GPS alt on a height datum reset if
we have GPS lock. If we don't do this then the reported AMSL alt will
drift over time away from the GPS alt when we reset while on the
ground
2019-07-07 19:20:32 +10:00
Andrew Tridgell
20ebb2500b
AP_NavEKF2: ensure that both AMSL and relative alt are correct after a reset
...
this forces the EKF origin to the GPS alt on a height datum reset if
we have GPS lock. If we don't do this then the reported AMSL alt will
drift over time away from the GPS alt when we reset while on the
ground
2019-07-07 19:20:32 +10:00
Andrew Tridgell
ff08de033e
Plane: fixed home reset alt bias
...
this fixes a bug in the set of home alt while disarmed. The set had a
circular dependency which could cause a large bias to build up between
home alt and gps alt due to small fluctuations in barometer data
Thanks to Nick Allen for spotting this
2019-07-07 19:20:32 +10:00
Andrew Tridgell
a38b030c41
RC_Channel: disable kill IMU with HAL_MINIMIZE_FEATURES
2019-07-07 19:03:01 +10:00
Andrew Tridgell
8e5c0fa32b
AP_InertialSensor: disable kill IMUs with HAL_MINIMIZE_FEATURES
2019-07-07 19:03:01 +10:00
Andrew Tridgell
2208689893
AP_NavEKF3: don't use disabled gyros in opticalflow takeoff detection
2019-07-07 19:03:01 +10:00
Andrew Tridgell
ddef40fa3d
AP_NavEKF2: don't use disabled gyros in opticalflow takeoff detection
2019-07-07 19:03:01 +10:00
Andrew Tridgell
a45e364252
AP_Mount: don't use disabled IMUs in solo gimbal code
2019-07-07 19:03:01 +10:00
Andrew Tridgell
3dd7e7e83a
AP_AHRS: only use enabled IMUs in DCM
...
honor the INS_USE parameters for DCM
2019-07-07 19:03:01 +10:00
Andrew Tridgell
09d3392aee
AP_InertialSensor: zero accumulators on time step
...
this zeros the delta angle and delta velocity accumulators when a
sensor is unavailable for a period of 0.1s. This prevents garbage
values being passed into the EKF when a sensor dies and then becomes
available again some time later
2019-07-07 19:03:01 +10:00
Andrew Tridgell
3444e82ef9
AP_InertialSensor: added RC switch for killing IMUs
2019-07-07 19:03:01 +10:00
Andrew Tridgell
30d27147a8
RC_Channel: added RC switch for killing IMUs
2019-07-07 19:03:01 +10:00
Andrew Tridgell
898150e460
HAL_ChibiOS: cope with calling delay_microseconds_boost() multiple times
...
needed for updated IMU wait code
2019-07-07 19:03:01 +10:00
Andrew Tridgell
053f0cb689
AP_InertialSensor: try much harder to get all IMU samples
...
this we ensures we get new data for all active IMUs on each loop,
rather than sometimes returning with some IMUs not having data.
This matters as not having a sample on an IMU for a single loop can
cause an EKF IMU failover, which will degrade the learned bias
variances
The issue is usually only seen under high load, such as requesting a
loop rate beyond what the hardware is capable of
2019-07-07 19:03:01 +10:00
Andrew Tridgell
209bca162c
AP_NavEKF3: added inactive bias learning
...
this allows for biases on inactive IMUs to be learned so that an IMU
switch within an EKF lane does not cause a jump in the IMU data
2019-07-07 19:03:01 +10:00
Andrew Tridgell
1c4c5a6850
AP_NavEKF2: learn gyro biases for inactive gyros
...
this allows us to learn the gyro biases each lane would need if it had
to switch to another gyro due to a sensor failure. This prevents a
sudden change in gyro bias on IMU failure
2019-07-07 19:03:01 +10:00
Andrew Tridgell
aa18c75689
Plane: decay fw rate integrators when at low airspeed
...
this prevents large fixed wing control surface integrators from
causing issues when we have wind from behind in hover
2019-07-07 18:16:47 +10:00
Andrew Tridgell
05bd0cb9f4
APM_Control: added decay_I() function
...
used by VTOL planes to decay integrator on fixed wing components when
at very low airspeed
2019-07-07 18:16:47 +10:00
Andrew Tridgell
ebe2278f5d
Plane: reset rate controller integrators if not run for 2s
...
this prevents a bug where integrator buildup can happen from a
previous flight mode
2019-07-07 18:16:47 +10:00
Randy Mackay
030eab0f86
AR_WPNav: stop vehicle if OA processing fails
2019-07-07 06:46:26 +09:00
Randy Mackay
951ded1f51
AP_OAPathPlanner: report errors to caller
2019-07-07 06:46:26 +09:00
Michael du Breuil
104164d2e4
AP_Scripting: Tighten range checks on library calls
2019-07-06 09:01:13 -07:00
Peter Barker
bb677756a0
Tools: Replay: EKF logging moved to AHRS from logger
2019-07-06 19:05:51 +10:00