Peter Barker
40ac2e493d
Tools: add a test for Plane's SET_ATTITUDE_TARGET support
2018-10-16 13:39:26 +11:00
Pierre Kancir
4f35992049
Tools: make param_parse.py error more explicit
...
Signed-off-by: Pierre Kancir <pierre.kancir@azurdrones.com>
2018-10-10 11:22:45 +11:00
Peter Barker
14d2012f54
Tools: autotest: add test for ekf navigation speed limits
2018-10-09 10:47:38 +11:00
Peter Barker
27657bfd40
Tools: param_metadata: flake8 compliance
2018-10-08 14:56:24 +11:00
Hamish Willee
329b972845
Tools: param_metadata: Add parser code to include uniq ref from path
2018-10-08 14:56:09 +11:00
Pierre Kancir
53e36931fb
Tools: correct channel configuration for gripper test
2018-10-03 20:10:13 +10:00
Pierre Kancir
3a29379d9e
Tools: run test_arm_feature for heli
2018-10-03 20:10:13 +10:00
Pierre Kancir
e087b03dd0
Tools: disable autodisarm test (broken)
2018-10-03 10:11:13 +02:00
Pierre Kancir
15e291aac9
Tools: don't set zero_throttle on arm/disarm
2018-10-03 10:10:25 +02:00
Pierre Kancir
0785706a94
Tools: test that heli interlock output cannot be high when disarmed
...
Co-authored-by: bnsgeyer <bnsgeyer@aol.com>
2018-10-03 10:09:30 +02:00
Pierre Kancir
752f78c80e
Tools: test ARMING_RUDDER restrictions
...
Co-authored-by: bnsgeyer <bnsgeyer@aol.com>
2018-10-03 10:09:30 +02:00
Pierre Kancir
31d4f1b065
Tools: test that copter cannot arm with throttle too high
...
Co-authored-by: bnsgeyer <bnsgeyer@aol.com>
2018-10-03 10:09:30 +02:00
Pierre Kancir
553874f14a
Tools: add arm/disarm with switch tests
...
Co-authored-by: bnsgeyer <bnsgeyer@aol.com>
2018-10-03 10:09:28 +02:00
Pierre Kancir
f441ab9f2a
Tools: autotest: validate RTL if disarmed close to home
2018-10-03 17:45:54 +10:00
Pierre Kancir
598b487fef
Tools: autotest: adjust start alt for throttle failsafe
2018-10-03 17:45:54 +10:00
Peter Barker
e4738192dd
Tools: autotest: clear mission before toggling it in with ch7
2018-10-03 17:45:54 +10:00
Peter Barker
38ae0765ff
Tools: autotest: increase throttle in stabilize mode to account for pitching
2018-10-03 17:45:54 +10:00
Pierre Kancir
b35cb4d814
Tools: update quadplane tests to use safer functions
2018-10-03 17:24:52 +10:00
Pierre Kancir
d37a74f46a
Tools: fix arm_motors_with_rc_input and disarm_motors_with_rc_input
2018-10-03 17:24:52 +10:00
Pierre Kancir
9b7e406a55
Tools: fix use of unassign variable
2018-10-03 17:19:38 +10:00
Pierre Kancir
55f4be0515
Tools: make do_set_mode function more generic
2018-10-03 16:57:01 +10:00
Pierre Kancir
b80937cbd4
Tools: add timout to arm/disarm functions
2018-10-03 16:57:01 +10:00
Peter Barker
55377b424e
Tools: autotest: add extra-configure-args option to autotest.py
2018-10-03 13:34:59 +10:00
Randy Mackay
23fd3b8f0e
Tools: update SITL sailboat default params
...
set SERVO4_FUNCTION is mainsail
enable windvane
2018-09-28 10:40:12 +09:00
Randy Mackay
851de12838
Tools: add sailboat to pysim and add default parameters
2018-09-26 12:00:13 +09:00
Peter Barker
4023f847c8
Tools: add ability for autotest to run examples
2018-09-19 22:40:20 -07:00
Peter Barker
af510801f1
Tools: autotest: use RC_CHANNELS rather than RC_CHANNELS_RAW
2018-09-12 10:06:36 +10:00
Peter Barker
a7042e3847
Tools: autotest: tweak output messages, loosen camera trigger timeout
2018-09-08 12:56:15 +10:00
Peter Barker
6e44ea13d4
Tools: autotest: do not arm vehicle before flaps test
2018-09-07 23:18:43 +10:00
Pierre Kancir
d8c53bbd9c
Tools: remove dependency on mavproxy for cmd_long based functions
2018-09-07 11:20:03 +10:00
Pierre Kancir
87a7fd0fbb
Tools: remove dependency on mavproxy for arming/disarm
2018-09-07 11:20:03 +10:00
Pierre Kancir
e278a09668
Tools: don't use strict comparison for param fetch all to cope with TYPE one's
2018-09-06 15:30:06 +10:00
Peter Barker
5d317a8ef7
Tools: autotest: clear Rover waypoints before toggling them in
2018-09-06 15:29:28 +10:00
Peter Barker
56646651c6
Tools: autotest: add test for RCn_OPTION - camera trigger
2018-09-05 13:47:19 +10:00
Peter Barker
f47823f4e4
Tools: autotest: add test for RCn_OPTION - toggling relays
2018-09-05 13:47:19 +10:00
Peter Barker
197edca772
Tools: expand test to cover use of disable-gcs-rc-overrides switch
2018-09-05 11:54:32 +10:00
Peter Barker
a9621191d8
Tools: autotest: correct descent throttle in copter fence test
...
1500 is sufficient that we may not descend.
2018-09-05 10:42:33 +10:00
Peter Barker
f1a0ebfd10
Tools: autotest: reduce verbosity of wait-for-heading
2018-09-04 10:32:26 +10:00
Peter Barker
5c7e21d38f
Tools: autotest: add test for clearing waypoints
2018-09-04 10:32:26 +10:00
Patrick José Pereira
fc1f2e4109
Tools: Update BARO_RND in sub param
...
From MS5837-30BA Ultra Small Gel Filled Pressure Sensor datasheet
The measurement depth system has a water depth resolution of 2 mm.
A standard deviation of 1.951 cm was the best result in experimental conditions
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-08-28 15:12:46 -04:00
Pierre Kancir
36d8ef1971
Tools: auto fetch parameter if in fetch_all list
2018-08-27 21:28:09 +10:00
Pierre Kancir
f6cc934678
Tools: pep8 corrections + correct variable shadowing
2018-08-27 17:08:47 +10:00
Pierre Kancir
d5c4c32529
Tools: add gripper test for copter
2018-08-27 14:39:49 +10:00
Pierre Kancir
7f601db05b
Tools: add gripper tests
2018-08-27 14:39:49 +10:00
cclauss
da7fe1055a
Tools: add missing import to arducopter.py
...
Fixes undefined names on lines 1406 and 1408
2018-08-27 11:40:47 +10:00
Pierre Kancir
aedd5a9db2
Tools: make takeoff check if it need arming and auto arm
2018-08-25 09:29:24 +09:00
Pierre Kancir
92d06c354e
Tools: rise nav_takeoff_delay_abstime delta to cope with rounding.
2018-08-25 09:28:36 +09:00
Peter Barker
a80d27eeff
Tools: autotest: fetch parameters after applying parameter file
2018-08-23 11:34:37 +10:00
Leonard Hall
519be92902
Tools: sitl gain update for hexa y6 and octaquad
2018-08-22 11:07:07 +09:00
Pierre Kancir
9c6e75f45b
Tools: allow to retry to get parameters before timeout
2018-08-21 21:26:39 +10:00
