Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
54,864 Commits 71 Branches 509 Tags 731 MiB
Commit Graph

215 Commits

Author SHA1 Message Date
Tom Pittenger a81f5cefbe AP_Mission: don't wrap when masking via HIGH/LOWBYTE 2017-01-06 17:35:44 -08:00
Eugene Shamaev dc3d10a28b AP_Mission: waypoint command parsing 2017-01-06 17:35:44 -08:00
Peter Barker 6fd771afc9 AP_Mission: starts_with_takeoff uses get_next_nav_cmd 2016-12-24 11:49:35 +09:00
Michael du Breuil f9acca67d3 AP_Mission: Align with spec better 
Location is out of spec for NAV_RETURN_TO_LAUNCH

NAV_LOITER_UNLIM couldn't roundtrip the provided loiter radius
 2016-12-05 17:31:36 -08:00
Peter Barker 20b83861e9 AP_Mission: support for NAV_CMD_PLACE 
AP_Mission: check return values of mission fetches
 2016-12-02 12:52:50 +11:00
Tom Pittenger 40777e9e74 AP_Mission: move jump_to_landing_sequence() to AP_Mission 2016-11-25 19:07:30 -08:00
Peter Barker 9d0d451c48 AP_Mission: add missing parameter metadata 2016-10-27 09:15:03 -07:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers 
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
 2016-10-24 09:42:01 -02:00
Andrew Tridgell 37f71bc6d6 AP_Mission: support DO_ENGINE_CONTROL 2016-07-25 10:06:03 +10:00
Grant Morphett 4e8666cee9 AP_Mission: Adding new MAV_CMD_DO_SET_REVERSE for Rovers. 
Rover now supports reverse via this MAV_CMD.
 2016-07-17 08:15:33 +10:00
Tom Pittenger 41c9cace68 AP_Mission: mavlink parsing should use check_lat/lng functions 2016-06-06 13:08:37 -07:00
Michael du Breuil fb07b8c4cc Mission: fix bounds checking of MISSION_ITEM lat/lon 2016-06-06 10:08:45 -07:00
Randy Mackay 54731a139f AP_Mission: rename starts_with_takeoff_cmd 2016-05-19 19:43:22 +09:00
Niti Rohilla 9ec0000691 AP_Mission: add check_takeoff_cmd 
This checks that the first command in the mission is a takeoff command which helps avoid mission setup errors in which users forget to start a mission with a takeoff command
 2016-05-19 19:43:17 +09:00
Niti Rohilla d771017c25 AP_Mission: support MAV_CMD_NAV_DELAY command 2016-05-19 16:16:02 +09:00
Tom Pittenger 9073ac91ff AP_Mission: 2of3 add loiter_xtrack option flag for post-loiter navigation via param4 
0 to crosstrack from center of waypoint, 1 to crosstrack from tangent exit location
 2016-05-16 11:50:54 -07:00
Tom Pittenger f1186b8b5c AP_Mission: store previous nav cmd id 2016-05-13 17:22:03 -07:00
Ricardo de Almeida Gonzaga dfe38b61de AP_Mission: Fix typos 2016-05-13 19:20:06 -03:00
Michael Day 62a7074dd7 AP_Mission: Added mavlink_cmd_long_to_mission_cmd method. 2016-05-06 11:59:44 -07:00
Michael Oborne fb3fc118f1 AP_Mission: support MAVLINK_MSG_ID_MISSION_ITEM_INT 2016-05-01 07:13:23 +10:00
Michael du Breuil fff21a1db9 Mission: Remove support for CONDITION_CHANGE_ALT 2016-04-30 10:56:09 +09:00
Michael du Breuil 831ae72908 AP_Mission: Remove DO_SET_PARAMETER 2016-04-25 09:59:59 +09:00
Andrew Tridgell 3a5e4c80ca AP_Mission: support DO_VTOL_TRANSITION command 
first 16 bit command ID
 2016-04-23 21:03:46 +10:00
Andrew Tridgell 09c3c36c00 AP_Mission: allow for 16 bit command IDs 
this uses command ID 0 to allow for 16 bit command IDs. When used it
limits the content to just 10 bytes.
 2016-04-23 21:03:45 +10:00
Tom Pittenger 1c513a99a0 AP_Mission: removed LOITER_TO_ALT heading requirement param field 
- and increased loiter radius max size (8bit to 16bit), it will soon always have heading requirement along with all loiter cmds
 2016-03-02 08:48:24 -08:00
Tom Pittenger 068374658c AP_Mission: utilize radius for loiter commands 2016-02-29 06:43:19 -08:00
Andrew Tridgell ad59cb9f5c AP_Mission: support VTOL_TAKEOFF and VTOL_LAND 2016-01-09 07:38:53 +11:00
DonLakeFlyer 7cd3d8bfdc AP_Mission: better mission errors 2015-12-21 16:02:23 +11:00
Caio Marcelo de Oliveira Filho f20a4e413c AP_Mission: use millis/micros/panic functions 2015-11-20 12:32:03 +09:00
Lucas De Marchi 831d8acca5 Remove use of PROGMEM 
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:

    git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
    git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'

The 2 commands were done so we don't leave behind spurious spaces.

AVR-specific places were not changed.
 2015-10-30 14:35:16 +09:00
Lucas De Marchi 2c38e31c93 Remove use of PSTR 
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.

This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.

AVR-specific places were not changed.
 2015-10-30 14:35:04 +09:00
Randy Mackay 756d564b7c Mission: sanity check command altitudes 2015-10-19 16:15:08 +09:00
Tom Pittenger cb20325593 AP_Mission: added flight stage FLIGHT_LAND_ABORT 
- add get_prev_nav_cmd_with_wp_index(). This is different than get_prev_nav_cmd_index() in that it only stores the index if there is a valid lat/lng (+1 squashed commits)
- added mission item command to NAV_LAND which is the abort takeoff altitude. If 0 then use last takeoff if available, else use 50m
 2015-09-09 09:04:24 +10:00
Tom Pittenger 1026e7df45 AP_Mission: updated comment 
altitude and lat/lng are all used
 2015-09-08 17:05:54 +10:00
Tom Pittenger 15b242832e AP_Mission: lat/lng == 0 bug fix 
was using wrong logic to check for lat/lng == 0
 2015-08-29 21:17:35 +10:00
Tom Pittenger 41508457e1 AP_Mission: add get_prev_nav_cmd_with_wp_index() 
This is different than get_prev_nav_cmd_index() in that it only stores the index if there is a valid lat/lng
 2015-08-29 21:17:35 +10:00
Randy Mackay 1271e531e2 Mission: sanity check location 2015-08-27 15:15:56 +09:00
Michael Day a5e1d8e902 AP_Mission: Give CONINTUE_AND_CHANGE_ALT a parameter: climb/descend 
Param 1 denotes which direction the user expects the plane to
travel when changing altitude:

0 = no expectation, command completes when within 5 m of altitude.
1 = climb expected, command completes at or above altitude.
2 = descent expected, command completes at or below altitude.
 2015-08-20 11:37:17 +10:00
Gustavo Jose de Sousa 34d1a29ec1 AP_Mission: standardize inclusion of libaries headers 
This commit changes the way libraries headers are included in source files:

 - If the header is in the same directory the source belongs to, so the
 notation '#include ""' is used with the path relative to the directory
 containing the source.

 - If the header is outside the directory containing the source, then we use
 the notation '#include <>' with the path relative to libraries folder.

Some of the advantages of such approach:

 - Only one search path for libraries headers.

 - OSs like Windows may have a better lookup time.
 2015-08-11 16:38:19 +10:00
Randy Mackay 766ccea3be Mission: fix bug causing first do-cmd to be run many times 
The symptom was that if the very first command in the mission was a
do-command, it would be run after every nav-command that didn't have
another do-command before it.
 2015-07-17 12:15:08 +09:00
Randy Mackay 429346f4bc AP_Mission: add missing breaks to case statement 2015-07-17 12:15:06 +09:00
Tom Pittenger e6122d1a4e AP_Mission: ensure cache coherence on mission resume 
- when resuming a mission we should read the value from storage of the same index to ensure we're not continuing an old cached version of the mission item.
- inherent problem: DO commands will continue and will be unaffected unless the new mission has a different DO_ command structure. If so, a set_current_cmd() or reset() should be issued by the GCS.
 2015-06-25 10:21:06 +10:00
Andrew Tridgell 9bd8e215b2 AP_Mission: enable DO_AUTOTUNE_ENABLE 2015-06-15 09:20:54 +10:00
Andrew Tridgell 08acde2766 AP_Mission: added ALTITUDE_WAIT NAV command 
used for HAB launch
 2015-06-15 09:20:54 +10:00
Randy Mackay 9c28d61a5c Mission: protect against endless loops of do-commands 2015-06-01 18:11:54 +09:00
Tom Pittenger 79605de8f5 AP_Mission: replace fabs() with fabsf() 2015-05-09 09:57:27 +10:00
Michael Day 3d3267d472 AP_Mission: Now support mission item MAV_CMD_NAV_LOITER_TO_ALT 2015-04-25 09:12:16 +10:00
Randy Mackay 87e6452ee9 Mission: bug fix when jump target is zero 
This would result in copter flying to a waypoint high above home
 2015-04-21 20:42:49 +09:00
Randy Mackay 888c2289ce Mission: support do-digicam-control parameters 2015-04-20 13:50:01 +09:00
Randy Mackay f6021010c5 Mission: support do-mount-control 2015-03-21 21:52:19 +09:00
Andrew Tridgell 3d433d2106 AP_Mission: loop check is only needed in one place 2015-01-23 13:48:45 +11:00
Andrew Tridgell 540cadc086 AP_Mission: prevent infinite loop with linked jump commands 
this prevents a "jump loop" from causing a firmware lockup. Thanks to
dellarb for reporting this!
 2015-01-23 13:14:27 +11:00
Andrew Tridgell ede920f293 AP_Mission: ensure location options are zero at start of mavlink conversion 2014-12-03 18:29:43 +11:00
Michael Day b3e693daa4 AP_Mission: Support MAV_CMD_DO_FENCE_ENABLE as a mission item. 2014-11-25 13:02:47 +11:00
Michael Day b36c1b2c3d AP_Mission: support for MAV_CMD_CONTINUE_AND_CHANGE_ALT 2014-11-25 10:43:15 +11:00
Michael Day 83c2f497a3 AP_Mission: Change jump_to_landing_sequence to get_landing_sequence_start 2014-10-24 21:42:06 +11:00
Andrew Tridgell 15a661e17a AP_Mission: fixed logic in jump_to_landing_sequence() 
see comments on drones-discuss
 2014-10-20 08:36:20 +11:00
Andrew Tridgell 8c6b875dcc AP_Mission: avoid the AP_AHRS cast 
get_position() is now const
 2014-10-20 08:36:20 +11:00
Michael Day ea91f4d47b AP_Mission: Added support for MAV_CMD_DO_LAND_START 2014-10-20 08:36:19 +11:00
Randy Mackay be1621877f Mission: support GUIDED_ENABLE and GUIDED_LIMITS 
This replaces the ardupilot only NAV_GUIDED command.
Also remove support for NAV_VELOCITY mission command which will be
replaced by SET_POSITION_TARGET non-mission command.
 2014-10-13 21:40:23 +09:00
Randy Mackay 5ca3c4baf6 Mission: fix CHANGE_ALT to store climb rate in lat param 
The slightly confusing storage of climb rate in the lat field led to a
bug fix a few months ago that actually created a bug.
 2014-09-26 23:23:04 +09:00
Randy Mackay 1ce8e453c2 Mission: add support for DO_GRIPPER 2014-09-17 21:14:17 +09:00
Andrew Tridgell effccacf46 AP_Mission: fixed acceptance radius outgoing 
this needs to match incoming
 2014-09-03 21:15:56 +10:00
Andrew Tridgell 3a5e960fe5 AP_Mission: revert APM_BUILD_TYPE change 2014-09-03 13:28:17 +10:00
Andrew Tridgell 36b854fa98 AP_Mission: fixed build for arduino IDE 2014-09-03 13:20:31 +10:00
Andrew Tridgell c4f84232e2 AP_Mission: make cmd.p1 be radius on plane for NAV_WAYPOINT 2014-09-03 12:38:30 +10:00
Randy Mackay d6aa868cac Mission: start next nav cmd immediately after prev completes 2014-08-27 18:05:49 +10:00
Andrew Tridgell 7a12ff0271 AP_Mission: convert to using StorageManager 2014-08-13 18:46:43 +10:00
Daniel Frenzel 1c7e8f8fb2 AP_Mission: Consecutive return, break, continue, goto or throw statements are unnecessary. 
Signed-off-by: Daniel Frenzel <dgdanielf@gmail.com>
 2014-08-11 09:24:26 +10:00
Andrew Tridgell df55ae86c4 AP_Mission: added last_change_time_ms() call 
will be used by terrain lib for scanning waypoints
 2014-08-06 17:59:19 +10:00
Randy Mackay 621cc2b953 Mission: bug fix to condition-change-alt 
Fix contributed by oniondream, thanks!
 2014-08-01 12:51:50 +09:00
Andrew Tridgell 34cbaa6f17 AP_Mission: added support for MAV_FRAME_GLOBAL_TERRAIN_ALT 2014-07-25 08:33:44 +10:00
Andrew Tridgell feaf9751cc AP_Mission: removed use of MAV_CMD_NAV_VELOCITY and MAV_CMD_NAV_GUIDED 2014-07-24 21:38:31 +10:00
Randy Mackay fe8a5be802 AP_Mission: support MAV_CMD_NAV_VELOCITY msg 2014-07-06 17:01:00 +09:00
Randy Mackay f4c9d58051 AP_Mission: add support for MAV_CMD_NAV_GUIDED 2014-07-06 17:00:26 +09:00
Randy Mackay 2f7dee3ba5 AP_Mission: squeeze loiter turns radius into high byte of p1 2014-06-17 20:53:50 +10:00
Andrew Tridgell f0df912a11 AP_Mission: added support for MAV_CMD_DO_INVERTED_FLIGHT 2014-06-05 15:44:18 +10:00
Randy Mackay 05f5164dfa Mission: rename AUTORESET to RESTART 2014-05-09 11:31:37 +09:00
Andrew Tridgell 818e500509 AP_Mission: improve the AP_Mission docs 
DisplayName isn't a description
 2014-04-29 11:46:06 +10:00
Andrew Chapman 782fbe1ec5 AP_Mission: added reset() function 2014-04-29 11:46:06 +10:00
Andrew Chapman a80e72ff82 AP_Mission: added MIS_AUTORESTART parameter 
- added MIS_AUTORESTART parameter, defaults to 0
- added start_or_resume() function to either start or resume a mission
based on that parameter value
 2014-04-29 11:46:06 +10:00
Randy Mackay d8f9a1c6c6 Mission: add support for MAV_CMD_DO_PARACHUTE 2014-04-07 13:36:55 +09:00
Andrew Tridgell cc212be41e AP_Mission: added get_next_ground_course_cd() API 
this gives the ground course of the next navigation leg, which can be
used to calculate the amount of steering required
 2014-04-07 09:29:54 +10:00
Andrew Tridgell 31082f4ce2 AP_Mission: fixed a bug re-entering AUTO 
this fixes a bug found by Marco where we would continue in CRUISE mode
with no waypoint if we re-entered AUTO after a mission reset
 2014-03-31 06:18:07 +11:00
Randy Mackay ac339a0289 Mission: add decoding of NAV_SPLINE command 2014-03-28 09:23:30 +09:00
Andrew Tridgell 0af35bd636 AP_Mission: fixed some compiler warnings 2014-03-24 12:52:27 +11:00
Andrew Tridgell 3bdc22d672 AP_Mission: make p1 16 bit 
this gives us a 16 bit value for extra data on a location, allowing
for an accurate angle in centi-degrees.

Also add validation of the size of the union arms in Content
 2014-03-20 16:57:09 +11:00
Randy Mackay c520cb789c Mission: cmd field types to match mavlink commands 
Split Set-Servo and Repeat-Servo command structures
Split Set-Relay and Repeat-Relay command structures
 2014-03-19 12:14:22 +09:00
Randy Mackay 37cff752c8 Mission: handle Loiter direction 
loiter-unlimited, loiter-turns and loiter-time cms specify the turn
direction in Param3.  This is stored in the location's loiter_ccw flag.
Previously supported only in Plane, moving here allows us to share more
code with Plane, Copter, Rover.
 2014-03-19 12:13:16 +09:00
Randy Mackay c75560218d Mission: command specific structures 2014-03-19 12:12:51 +09:00
Andrew Tridgell 3a6698f54b AP_Mission: fixed typo 2014-03-19 12:12:42 +09:00
Andrew Tridgell 3538621c48 AP_Mission: doc updates 2014-03-19 12:12:40 +09:00
Randy Mackay 48329c1bba Mission: bug fix for loading consecutive do-cmds 
The verify step was not being run for the 2nd consecutive do-command in
a mission list
 2014-03-19 12:12:37 +09:00
Randy Mackay 266a1ce9af Mission: bug fix set_current_cmd 
If mission had completed desired command index was ignored
 2014-03-19 12:12:27 +09:00
Andrew Tridgell 107cc2c126 AP_Mission: added truncate() function 
Used when loading a mission while flying

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2014-03-19 12:12:21 +09:00
Andrew Tridgell acdaf561c8 AP_Mission: fixed typo 2014-03-19 12:12:15 +09:00
Randy Mackay 9e07070d86 Mission: pass eeprom start into constructor 
This allows different storage locations for ArduCopter, Plane and Rover
 2014-03-19 12:11:53 +09:00
Randy Mackay ddc4cd4f18 Mission: add init and check_eeprom_version methods 2014-03-19 12:11:46 +09:00
Randy Mackay 4c0a31a9dc Mission: init home to zero before writing to eeprom 2014-03-19 12:11:37 +09:00
Randy Mackay 512b378c4a Mission: allow set_current_cmd when mission is not running 
Can now be run when mission is complete or stopped.  When mission is
resumed it will begin at the set command.  This command can be either a
nav or do command
 2014-03-19 12:11:10 +09:00
Andrew Tridgell eaf34bba9a AP_Mission: fixed reset using set mission item to 0 
this causes a mission reset
 2014-03-19 12:11:07 +09:00
Randy Mackay 8dd301b0c2 Mission: set_current_cmd to use uint16 2014-03-19 12:11:06 +09:00
Randy Mackay a6e422333e Mission: remove alt_in_cm from mavlink to cmd conversion 2014-03-19 12:11:01 +09:00
Randy Mackay 0dc3c9ab42 Mission: add p1 to command structure 
mavlink_to_mission_cmd method extended to support plane including adding
parameter to allow the alt to be expressed in cm or meters
 2014-03-19 12:10:45 +09:00
Randy Mackay 61cc5e6b72 Mission: add replace_cmd method 2014-03-19 12:10:40 +09:00
Randy Mackay 3cbbd4ebb9 Mission: add set current command method 2014-03-19 12:10:36 +09:00
Randy Mackay c7ffd2db90 Mission: reduce unnecessary search for do-commands 
do_cmd_all_done flag is set after all do-commands are complete
 2014-03-19 12:10:33 +09:00
Randy Mackay 0c92d60406 Mission: command index increase to int16 
Once more eeprom space is allocated this will allow more than 255
commands
 2014-03-19 12:10:31 +09:00
Randy Mackay 85b979ede9 Mission: support do-jump num_times is -1 
do-jump loops forever when num times is set to -1
 2014-03-19 12:10:29 +09:00
Randy Mackay f4d8ccc128 Mission: add mavlink to cmd conversion methods 2014-03-19 12:10:17 +09:00
Randy Mackay 87c7d19f83 AP_Mission: special handling for cmd 2014-03-19 12:10:14 +09:00
Randy Mackay e8db57ced3 AP_Mission: replace block read/write for eeprom 
Also reserve command #0 for home position
 2014-03-19 12:10:00 +09:00
Randy Mackay 84b3497a82 AP_Mission: fixes to protect against endless loops 2014-03-19 12:09:57 +09:00
Randy Mackay 6086bc14be AP_Mission: mostly working draft 2014-03-19 12:09:56 +09:00
Randy Mackay 4285eba297 AP_Mission: initial draft library 2014-03-19 12:09:54 +09:00