Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
52,089 Commits 71 Branches 509 Tags 715 MiB
Commit Graph

428 Commits

Author SHA1 Message Date
Tom Pittenger 7445fac577 Plane: move mavlink msg handling into library 2016-08-16 16:33:36 -07:00
Andrew Tridgell d482c7f4b7 Plane: decode correct ADSB packet 2016-08-16 16:33:36 -07:00
Andrew Tridgell b29b609bcc Plane: added AFS support for quadplanes 2016-08-16 12:56:12 +10:00
Andrew Tridgell 76b6cbbda1 Plane: prevent motor startup on reboot in quadplanes 
we need to prevent RC overrides within px4io from running
 2016-08-16 12:53:34 +10:00
Peter Barker cb7686001f Plane: add dataflash as a bit for the mavlink SYS_STATUS message 2016-08-11 17:48:44 -03:00
Tom Pittenger 5fd3c79202 Plane: Fix typos 2016-08-04 11:42:41 -07:00
Lucas De Marchi c27ebd10c2 ArduPlane: Remove i2c lockup count 
This was returned only for a single bus and on all supported platforms
this is hardcoded to 0.
 2016-07-28 18:03:09 -03:00
Andrew Tridgell 327a057ee0 Plane: added internal combustion engine support 
this allows for automatic engine start and restart
 2016-07-25 10:06:03 +10:00
Andrew Tridgell 02babb71b3 ArduPlane: adjust for 16 channels in SERVO_OUTPUT_RAW 2016-07-25 10:06:02 +10:00
Tom Pittenger 3f195df9f0 Plane: handle ADSB-Out packets 2016-07-22 13:38:58 -07:00
Tom Pittenger 5c3cca7911 Plane: handle incoming ADSB transceiver packet 2016-07-22 12:20:39 -07:00
Andrew Tridgell 7b147e3941 Plane: handle PLAY_TUNE message 2016-07-22 15:00:17 +10:00
Andrew Tridgell 569cc1c108 Plane: support the LED_CONTROL MAVLink message 2016-07-19 13:37:14 +10:00
Allan Matthew c479fcab39 Plane: support GPS_INPUT mavlink message 2016-07-12 15:35:09 +09:00
Andrew Tridgell e8976d3a89 Plane: check for optflow enable in more places 2016-07-12 09:05:52 +10:00
Tom Pittenger 0597dbd033 Plane: allow SET_ATTITUDE_TARGET to set rpy and throttle 2016-07-01 08:28:53 -07:00
Tom Pittenger 85afd9e245 Plane: remove guided roll flag, handle it with timer=0 2016-06-30 07:48:37 -07:00
Michael Day 8ac433f991 Plane: Can now command roll from a companion computer. 2016-06-30 10:27:44 -04:00
Tom Pittenger 9b973fb899 Plane: add ADSB_streamrate 2016-06-19 11:24:31 -07:00
Tom Pittenger 204abfd45e Plane: set heartbeat.system_status to Critical for low-battery failsafe events 2016-06-07 17:14:51 -07:00
Tom Pittenger 3140ce6ab6 Plane: change MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT gcs msg to remove abbreviations. Hope it fits! 2016-06-07 08:28:35 -07:00
Tom Pittenger bd270720da Plane: whitespace formatting 2016-06-07 08:27:40 -07:00
Michael Day 429e348824 Plane: Can now change current WP alt via mavlink. 
Uses the mavlink msg SET_POSITION_TARGET_GLOBAL_INT
 2016-06-07 08:16:39 -07:00
Tom Pittenger 01e636065d Plane: non-functional: mostly whitespace and removed extra set result statement 2016-06-07 08:11:05 -07:00
Michael Day 2c0f0a04d8 Plane: Only allow speed changes in GUIDED and AUTO modes. 2016-06-07 08:22:44 -04:00
Andrew Tridgell eae2bf54ca Plane: fixed gcc 6.1 build error 2016-06-06 07:43:45 +10:00
Peter Barker ee5290c178 Plane: avoid switch statement for enabling fence if no fence present 2016-06-02 14:37:21 +10:00
Tom Pittenger 954c987075 Plane: do not parse GEOFENCE packets when geofence is disabled via compile option 2016-06-01 17:38:52 -07:00
Tom Pittenger ea9e39212f Plane: use new check_latlng helper 2016-06-01 17:38:51 -07:00
Peter Barker 28361afc2a Plane: move telemetry_delayed up into base class 2016-05-31 08:46:09 +10:00
Peter Barker 9ee62aac30 Plane: move adjust_rate_for_stream up 2016-05-29 19:38:50 +10:00
Peter Barker af5a52e2aa Plane: subclass GCS_MAVLink in place of defining its functions for it 2016-05-29 16:21:21 +10:00
Andrew Tridgell 6e4c0dd3d7 Plane: allow non-blocking calibrations while armed 2016-05-24 17:10:41 +10:00
Andrew Tridgell d3494d1369 Plane: don't stall EKF during baro cal 2016-05-24 17:00:56 +10:00
Andrew Tridgell 5b4bbf08fd Plane: use send_heartbeat wrapper 2016-05-21 15:25:18 +10:00
Andrew Tridgell 9f47e6417b Plane: always build with MAVLink2 headers 2016-05-21 15:25:16 +10:00
Andrew Tridgell eee06da1b5 Plane: use HAVE_PAYLOAD_SPACE() 2016-05-21 15:25:14 +10:00
Andrew Tridgell a103e70460 ArduPlane: handle SETUP_SIGNING message 2016-05-21 15:25:13 +10:00
Don Gagne 151686ce9d ArduPlane: SET_SENSORS_OFFSETS support for third compass 2016-05-19 18:51:17 -03:00
Andrew Tridgell e3b2e90a27 Plane: cleanup unnecessarily complex gcs[] usage 2016-05-17 08:27:39 +10:00
Tom Pittenger 8a58f5a5eb Plane: convert airspeed_error_cmd to airspeed_error (in meters) 2016-05-13 17:21:59 -07:00
skyscraper 7f29903287 ArduPlane: Fix up after refactoring RC_Channel class 
Further to refactor of RC_Channel class which included
adding get_xx set_xx methods, change reads and writes to the public members
to calls to  get and set functionsss

old public member(int16_t)   get function -> int16_t     set function (int16_t)
(expression where c is an object of type RC_Channel)
c.radio_in                     c.get_radio_in()           c.set_radio_in(v)
c.control_in                   c.get_control_in()         c.set_control_in(v)
c.servo_out                    c.get_servo_out()          c.set_servo_out(v)
c.pwm_out                      c.get_pwm_out()            // use existing
c.radio_out                    c.get_radio_out()          c.set_radio_out(v)
c.radio_max                    c.get_radio_max()          c.set_radio_max(v)
c.radio_min                    c.get_radio_min()          c.set_radio_min(v)
c.radio_trim                   c.get_radio_trim()         c.set_radio_trim(v);

c.min_max_configured() // return true if min and max are configured

Because data members of RC_Channels are now private and so cannot be written directly
 some overloads are provided in the Plane classes to provide the old functionality

new overload Plane::stick_mix_channel(RC_Channel *channel)
which forwards to the previously existing
void stick_mix_channel(RC_Channel *channel, int16_t &servo_out);

new overload Plane::channel_output_mixer(Rc_Channel* , RC_Channel*)const
which forwards to
(uint8_t mixing_type, int16_t & chan1, int16_t & chan2)const;

Rename functions

 RC_Channel_aux::set_radio_trim(Aux_servo_function_t function)
    to RC_Channel_aux::set_trim_to_radio_in_for(Aux_servo_function_t function)

 RC_Channel_aux::set_servo_out(Aux_servo_function_t function, int16_t value)
    to RC_Channel_aux::set_servo_out_for(Aux_servo_function_t function, int16_t value)

 Rationale:

        RC_Channel is a complicated class, which combines
        several functionalities dealing with stick inputs
        in pwm and logical units, logical and actual actuator
        outputs, unit conversion etc, etc
        The intent of this PR is to clarify existing use of
        the class. At the basic level it should now be possible
        to grep all places where private variable is set by
        searching for the set_xx function.

        (The wider purpose is to provide a more generic and
        logically simpler method of output mixing. This is a small step)
 2016-05-10 16:21:16 +10:00
Leandro Pereira f23bd7e09d GCS_MAVLink: Use a single stream_trigger() implementation 
This has no side effects, but since all implementations were basically
the same, move the implementation to GCS_Common and the only part that
adjusts the rate based on which which stream to each individual
GCS_MAVLINK implementation.
 2016-05-07 23:49:35 -03:00
Andrew Tridgell 3853aa0fe3 Plane: fix for changed API 2016-05-07 18:27:22 +10:00
Michael Day b096e1404d Plane: Add MAVLink message handler for CMD_DO_CHANGE_SPEED 2016-05-06 11:59:45 -07:00
Lucas De Marchi baa287e5e5 ArduPlane: use separate header for version macro 
Having the version macro in the config.h and consequently in the main
vehicle header means that whenever the version changes we need to
compiler the whole vehicle again. This would not be so bad if we weren't
also appending the git hash in the version. In this case, whenever we
commit to the repository we would need to recompile everything.

Move to a separate header that is include only by its users. Then
instead of compiling everything we will compile just a few files.
 2016-05-06 13:11:28 -03:00
Allan Matthew 25c8027606 Plane: handle new MAVLink rangefinder input 2016-05-04 08:40:34 -07:00
Michael du Breuil 0fcfcdc169 Plane: Broadcast POSITION_TARGET_GLOBAL_INT as part of the EXTENDED_STATUS stream 2016-05-01 07:38:23 +10:00
Michael Oborne cd56061b24 ArduPlane: support MAVLINK_MSG_ID_MISSION_ITEM_INT 2016-05-01 07:13:46 +10:00
Andrew Tridgell 4666b25258 Plane: initial implementation of QRTL for quadplane RTL 2016-04-30 14:34:47 +10:00
Niti Rohilla a03941ba02 ArduPlane : Updated handle_guided_request() to report error. 2016-04-29 12:39:28 -03:00
Andrew Tridgell 76400a9959 Plane: support DO_VTOL_TRANSITION as a mission item 2016-04-23 21:03:46 +10:00
James Stoyell 4e7e84fc99 Plane: Modified last_valid_rc_ms AFS failsafe input to work when standard failsafe is on 
Ran into a bug on our physical plane where failsafe.last_valid_rc_ms was not recognizing that the transmitter had failed. This is likely due to how the standard failsafe works in receiving lower-than-possible throttle values. So in order to account for this, I added a new variable to the failsafe, AFS_last_valid_rc_ms, and I update it only if the ch3_failsafe (the throttle failsafe) is not on. If the throttle failsafe is on, that means that the plane has indeed lost transmitter input, so the AFS needs to recognize that.
 2016-04-22 11:48:36 -07:00
Randy Mackay 4291139b6c Plane: ack DO_MOUNT_CONTROL messages 2016-04-22 21:30:51 +09:00
Andrew Tridgell 8683616d8c Plane: redo scheduler table and improve perf logging 
The scheduler table was still setup for a worst case CPU of
AVR2560. Adjust times for the stm32 and improve perf logging
 2016-04-21 16:45:02 +10:00
Lucas De Marchi 0095f6168e ArduPlane: fix handling of SET_HOME_POSITION 
Location.altitude is stored in cm.
 2016-04-18 13:07:45 +10:00
Michael du Breuil c17ea21a97 Plane: Add support for DO_REPOSITION via COMMAND_INT 
also allows guided to change loiter directions
 2016-04-17 19:00:03 -07:00
Randy Mackay 70f81ee338 Plane: remove multicopter PID parameters 
These have been moved to the AC_AttitudeControl class
 2016-04-01 11:59:30 +09:00
Andrew Tridgell f73c8ab8ed Plane: allow testing of all motors in sequence 
this makes for an easier startup test for a quadplane, allowing a
single MAVLink command to test that all motors are working correctly
in the right sequence
 2016-04-01 11:09:51 +11:00
Michael du Breuil 35bb6a634e Plane: Make base_mode armed status depend upon the arming library, not soft armed 2016-03-17 15:16:17 +11:00
Andrew Tridgell 89970e4eaa Plane: support motor_test for quadplanes 2016-03-13 10:05:10 +11:00
Michael du Breuil f60b3fd6c7 Plane: remove "Command recieved" statustext 2016-03-10 15:36:05 +11:00
Andrew Tridgell f4ccf94dfc Plane: added QLAND mode 
for VTOL landing. Use for failsafe as well
 2016-03-09 18:20:41 +11:00
Andrew Tridgell 968f07f583 Plane: allow live quadplane PID tuning 2016-02-29 14:10:32 +11:00
Tom Pittenger 6399d00950 Plane: convert to using static send_statustext 
- no more MSG_STATUSTEXT
- TODO: replace calls to gcs_send_text and gcs_send_text_fmt to GCS_MAVLINK::send_statustext()
 2016-02-24 09:18:06 +11:00
Tom Pittenger d04b5e735f Plane: add SYS_STATUS reverse_motor 
- helpful to tell GCS to interpret VFR_HUD as negative when bit is enabled
- throttle is sent as abs()
 2016-02-11 18:46:01 +11:00
Tom Pittenger b8d5369ebd Plane: add flight stage LAND_PREFLARE 2016-02-09 14:18:02 +11:00
Andrew Tridgell 8dba91658c ArduPlane: log a picture if AP_Camera::control() returns true 2016-01-29 10:01:51 +11:00
Andrew Tridgell 0d6b353bcb Plane: added quad assistance and auto support for quadplane 2016-01-09 07:38:52 +11:00
Andrew Tridgell 2983576067 Plane: added QLOITER mode 
quadplane loiter
 2016-01-09 07:38:52 +11:00
Andrew Tridgell ca85c332d6 Plane: separate QSTABILIZE and QHOVER modes 2016-01-09 07:38:52 +11:00
Andrew Tridgell 6468fc6d93 Plane: Initial implementation of quadplane 
adds "HOVER" mode
 2016-01-09 07:38:52 +11:00
Tom Pittenger 0bfe235d6b Plane: use abort landing logic with mavlink GO_AROUND cmd 
- also enabled use of CMD_DO_GO_AROUND altitude param
 2015-12-31 15:34:41 +11:00
Siddharth Bharat Purohit 78566bda36 Plane: wire up accel calibrator for plane 2015-12-29 10:46:35 -08:00
DonLakeFlyer 7479bc5734 Plane: return success or failure of get home position 2015-12-07 12:33:23 +09:00
Peter Barker 84b53e58d5 Plane: DataFlash-over-MAVLink support 2015-12-03 13:21:52 +11:00
Luis Vale Gonçalves 4722a388b9 Plane: Text revisions 
text revisions
 2015-11-27 18:54:30 +11:00
Luis Vale Gonçalves b7f3782e4e Plane: Text revisions 
text revisions
 2015-11-26 07:56:52 +11:00
Tom Pittenger eaad72c192 Plane: Add support for handing ADS-B traffic 
- parse MAVLINK_MSG_ADSB_VEHICLE msg
- new 1Hz adsb_update task to compare list against for threat detection
- perform object avoidance via loiter or loiter_and_descend. More methods are welcome!
 2015-11-23 19:45:40 +11:00
Caio Marcelo de Oliveira Filho c8888329e1 Plane: use millis/micros/panic functions 2015-11-20 12:26:40 +09:00
lvale e18181e5c2 Plane: Uniformization of severities 
Plane uniformization of severities
 2015-11-09 09:38:25 +11:00
Lucas De Marchi c55c07eaf6 ArduPlane: remove check for AVR CPUs 
Remove the checks for HAL_CPU_CLASS > HAL_CPU_CLASS_16 and
HAL_CPU_CLASS >= HAL_CPU_CLASS_75. Corresponding dead code will be
removed on separate commits.
 2015-11-04 12:14:15 +11:00
Lucas De Marchi 1b07dabeb7 Replace prog_char and prog_char_t with char 
prog_char and prog_char_t are now the same as char on supported
platforms. So, just change all places that use them and prefer char
instead.

AVR-specific places were not changed.
 2015-10-30 14:35:30 +09:00
Lucas De Marchi 4ab9821624 Replace use of Log_Write_Message_P() with Log_Write_Message() 2015-10-30 14:35:28 +09:00
Lucas De Marchi 89fc4f4b62 Replace use of send_text_P() with send_text() 2015-10-30 14:35:17 +09:00
Lucas De Marchi 831d8acca5 Remove use of PROGMEM 
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:

    git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
    git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'

The 2 commands were done so we don't leave behind spurious spaces.

AVR-specific places were not changed.
 2015-10-30 14:35:16 +09:00
Lucas De Marchi 84da1f5039 Rename gcs_send_text_P to gcs_send_text 2015-10-30 14:35:07 +09:00
Lucas De Marchi 84d5fb006f Remove use of Util::{v,}snprintf_P() 
These are now the same function as Util::snprintf().
 2015-10-30 14:35:05 +09:00
Lucas De Marchi 2c38e31c93 Remove use of PSTR 
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.

This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.

AVR-specific places were not changed.
 2015-10-30 14:35:04 +09:00
Andrew Tridgell 3c3392aae5 Plane: improve error messages on failed parachute release 2015-10-27 16:06:34 +11:00
Andrew Tridgell 9affddcaa3 Plane: initial support for AP_Parachute library 2015-10-27 16:06:34 +11:00
Randy Mackay 17ed125e41 Plane: add no break comment to suppress compiler warning 2015-10-03 12:56:30 +09:00
Randy Mackay 32c5b0e63c Plane: support set_home_position message 2015-10-03 12:56:28 +09:00
Randy Mackay d54e28e129 Plane: send home position when home is set or get-home msg received 2015-10-03 12:56:27 +09:00
Andrew Tridgell 213bed99e1 Plane: use ahrs.send_ekf_status_report() 2015-09-29 10:59:19 +10:00
Andrew Tridgell 017ebc440b Plane: added SENSOR_RC_RECEIVER reporting in SYS_STATUS 2015-09-28 08:55:24 +10:00
Andrew Tridgell 458e967d06 Plane: added RPM logging 
useful for seeing if a petrol motor is still running
 2015-09-24 20:58:18 +10:00
Randy Mackay 6da53ae3b2 Plane: replace SKIP_GYRO_CAL with INS_GYR_CAL 
Also calibrate gyros with accel cal and set trim
 2015-09-21 17:06:43 +09:00
squilter 7365701d13 Plane: Support do_digicam_x via command_long 2015-09-16 13:06:51 +09:00
Grant Morphett f953f03916 Plane: Fixing issue 327 - reporting Baro alt instead of GPS 2015-09-08 09:40:39 +10:00
Randy Mackay 8c1212d4a6 Plane: support do-mount-control via command-long 2015-09-06 16:01:31 +09:00
Siddharth Bharat Purohit aea1db7348 ArduPlane: implement on-board compass cal for arduplane 2015-09-03 16:59:14 +10:00
Randy Mackay cc68260478 Plane: sanity check do-set-home, do-set-ROI and fence-point locations 2015-08-28 13:14:38 +10:00
squilter 583c087eca Plane: update severities 2015-08-28 10:04:35 +10:00
Tom Pittenger 204ff7b158 Plane: move statics into new struct 
removed default case statements
 2015-08-23 10:34:18 +10:00
Tom Pittenger 6d0ad05192 GCS_Mavlink: added is_crashed to mavlink heartbeat status which shows EMERGENCY 2015-08-23 10:34:18 +10:00
squilter d421644f3a Plane: define and send FIRMWARE_VERSION 2015-08-23 09:21:57 +09:00
Tom Pittenger 86e3116fb6 Plane: implement try send mission_item_reached 
clean up unreachable code
 2015-08-19 15:42:07 +10:00
Andrew Tridgell 58e829553f Plane: prevent build error with MSG_RPM 2015-08-12 15:03:52 +10:00
Andrew Tridgell 6c07795b63 Plane: added HIL_SUPPORT define 
disable HIL support on APM2 to save flash space
 2015-07-30 11:04:31 +10:00
Randy Mackay 76ccf4043e Plane: log ahrs home and ekf origin 2015-07-06 12:11:56 +09:00
Tom Pittenger f1ee129423 Plane: compiler warnings 
- float to double in gcs_send_test (x2)
- float to bool
 2015-07-06 09:30:19 +10:00
Peter Barker 3fce7eb21a Plane: use common mission logging code 2015-06-30 16:23:35 +10:00
Michael du Breuil 54c06cde02 Plane: Log the steering controller PID state 2015-06-22 15:41:44 +10:00
Andrew Tridgell 248bf8c5a3 Plane: disable geofence on APM2 2015-06-20 14:52:42 +10:00
Andrew Tridgell 2dbe372b2f Plane: cleanup some coverity warnings 2015-06-20 13:26:34 +10:00
Andrew Tridgell 76c0293a85 Plane: added support for DO_AUTOTUNE_ENABLE 2015-06-15 09:20:55 +10:00
Randy Mackay 814cb5ce18 Plane: add vibration DF logging and send to GCS 2015-06-12 21:36:47 +09:00
Eugene Shamaev 5b34fa4f6a Plane: added DSM bind support 2015-06-10 17:19:10 +10:00
Andrew Tridgell 6b9854457d Plane: added PID tuning logging for ground steering 2015-06-09 12:48:56 +10:00
Andrew Tridgell bf396d7138 Plane: log to tlog when we set home via MAVLink 2015-06-04 13:26:39 +10:00
Andrew Tridgell 09476bf9d3 Plane: added GCS_PID_MASK for realtime pid tuning 2015-05-27 14:28:46 +10:00
Lucas De Marchi 7c4cf41ebc ArduPlane: use functor macros 
Functor is not yet being used but let's make is macro fallback to the
previous Delegate implementation for easy of transition between the two.
 2015-05-26 13:46:54 +10:00
Andrew Tridgell 97687f04af Plane: enable messages for MAVLink gimbal support 2015-05-26 08:30:30 +10:00
Andrew Tridgell 78f02634d0 Plane: fixed ins reference in plane object 2015-05-21 07:48:54 +10:00
Andrew Tridgell 554869033f Plane: disabled rangefinder on APM2 
this saves 5k of flash space, enough for support to be kept for
another release
 2015-05-21 07:48:53 +10:00
Andrew Tridgell b92c2409e4 Plane: added local millis() and micros() to reduce code size a bit 2015-05-21 07:48:53 +10:00
Andrew Tridgell 18c37935c9 Plane: convert from .pde to .cpp files 2015-05-21 07:48:52 +10:00