Michael du Breuil
3e4288d604
Plane: Use RC_Channels instead of hal.rcin
2018-04-11 21:47:07 +01:00
Michael du Breuil
7405bb7b85
Plane: Support new battery failsafes
2018-03-27 22:12:21 +01:00
Peter Barker
7fd859da65
Plane: move home state into AP_AHRS
2018-03-19 10:32:37 +09:00
Peter Barker
7c86c4fe61
Plane: use ins singleton
2018-03-16 00:37:35 -07:00
night-ghost
98b8a61ca8
Plane: allow AP_Stats to be optional
2018-03-02 07:23:35 +11:00
David Ingraham
a6aeebad4b
Plane: Add support for AP_Gripper
2018-03-01 14:14:43 +11:00
Andrew Tridgell
e6cebdecd1
Plane: use scheduler.get_last_loop_time_s()
2018-02-13 17:15:05 +11:00
Peter Barker
3859e5dfb1
Plane: eliminate update_perf_logging scheduler table shim
2018-02-13 17:15:05 +11:00
Andrew Tridgell
36660b2124
Plane: use filtered loop time
2018-02-13 17:15:05 +11:00
Peter Barker
4586b892f2
Plane: pass log-performance-bit at init time rather than update time
2018-02-13 17:15:05 +11:00
Peter Barker
8cae776448
Plane: move logging of PM and PERF messages to AP_Scheduler
2018-02-13 17:15:05 +11:00
Peter Barker
02540fdbf9
Plane: use AP_Scheduler's loop() function
2018-02-13 17:15:05 +11:00
Peter Barker
73092c3c30
Plane: use scheduler ticks in place of mainloop_count
2018-02-13 17:15:05 +11:00
Peter Barker
519e6c31d2
Plane: use AP::PerfInfo library
2018-02-13 17:15:05 +11:00
Andrew Tridgell
2fb6113098
Plane: use AP:PerfInfo class
2018-02-10 10:50:22 +11:00
Andrew Tridgell
d1e11a5bde
Plane: fixed build (remove learn_offsets call)
2018-02-08 17:36:33 +11:00
Tom Pittenger
512b327cd4
Plane: failsafe events to use enums instead of magical numbers : Non-functional change
2017-12-07 00:19:32 -08:00
Andrew Tridgell
2a81792b41
Plane: don't disable compass on one bad reading
...
the compass can go back for a short time and recover
found by Michael
2017-11-28 09:02:24 +11:00
Michael du Breuil
9720fcb8cc
Plane: Only update home when not armed, rather then not soft armed
...
Plane supports being armed, in takeoff logic and not spinning the motor
until the moment the safety button has been pressed. Unfortunately
because the safety button is required to be pressed for soft arming this
results in the plane updating home position while the user moves the
vehicle or is holding it to throw the vehicle which will can result in
several meters of altitude error from where the user expected home to
be.
Because the normal approach to plane is to have activated the safety
button before arming the aircraft this is not expected to be a behaviour
change for most users, but an improvement for people who use the button
to initiate a takeoff.
2017-11-21 11:45:15 +11:00
Michael du Breuil
767018b1d4
Plane: Support unlocking cruise heading with rudder
2017-11-09 09:39:44 +11:00
Tom Pittenger
8029a7f10e
Plane: add Tom Pittenger to developers list
...
Plane: add Tom Pittenger to developers list. He was added to main Plane.h as "Lead Developer" here *https://github.com/ArduPilot/ardupilot/blob/master/ArduPlane/Plane.h#L2 ) but never to the main ArduPilot.c file.
2017-11-06 13:46:32 +01:00
Andrew Tridgell
9c8cd6c1cc
Plane: added Q_TRANS_DECEL
...
this gives a deceleration rate for QRTL transition from RTL, and also
for transitions to QLOITER
2017-11-05 20:44:42 +11:00
Michael du Breuil
d52f5155f0
Plane: Rename rc failsafe state members
2017-11-02 16:46:08 -07:00
Andrew Tridgell
1085069851
Plane: use WP_LOITER_RAD if RTL_RADIUS is 0 for QRTL
2017-10-30 16:52:19 +11:00
Andrew Tridgell
aa430a6e2c
Plane: use RTL_RADIUS for QRTL threshold
...
when Q_RTL_MODE=1 in a quadplane use RTL_RADIUS as the distance to
switch to QRTL mode. We navigate to the destination using direct
waypoint navigation instead of using a loiter circle.
2017-10-30 16:30:38 +11:00
Peter Barker
d49be616da
Plane: call ins's periodic function
2017-10-27 16:33:45 +11:00
Tom Pittenger
8adacfeea3
Plane: always log MODE and include reason when logging is enabled
2017-10-25 21:18:29 +11:00
Lucas De Marchi
44ffb67837
ArduPlane: use FALLTHROUGH define
...
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Peter Barker
1a665280e9
Plane: remove CLI
2017-08-14 10:23:50 +09:00
Peter Barker
2fb46a67dd
Plane: camera is responsible for taking distance-based-images and logging
2017-07-28 14:27:53 +01:00
Michael du Breuil
f87a69dcf2
Plane: Throttle based landing aborts should ask the landing library
...
Throttle based aborts should be requesting a go around from AP_Landing.
This was missed in the initial port.
2017-07-17 08:43:50 -07:00
Peter Barker
c058fba5ac
Plane: eliminate GCS_MAVLINK::send_statustext_all
2017-07-11 23:53:53 +01:00
Peter Barker
3b0a7703c4
Plane: eliminate gcs_send_message wrapper
2017-07-11 23:45:16 +01:00
Peter Barker
5a8f01c19c
Plane: use send_text method on the GCS singleton
2017-07-09 17:17:29 -04:00
Peter Barker
949e07c7e3
Plane: use DataFlash should_log to determine raw IMU logging
2017-06-29 15:26:27 +01:00
Mark Whitehorn
6607dafc66
ArduPlane: change is_tailsitter() to tailsitter_active()
2017-06-07 20:21:49 +10:00
Mark Whitehorn
53b82d1d4d
ArduPlane: add comments on tailsitter pitch limits
2017-06-07 20:21:49 +10:00
Mark Whitehorn
65755454e0
ArduPlane: set tailsitter VTOL pitch limits using only Q_ANGLE_MAX
2017-06-07 20:21:49 +10:00
Michael du Breuil
92d505598b
ArduPlane: Poll AP_Landing for fly forward information
2017-05-15 14:50:29 -07:00
Peter Barker
378015691b
Plane: stop appending lf to PERF message
2017-05-01 16:21:55 +01:00
Andrew Tridgell
351304ebcb
Plane: don't set fly-forward when transitioning
...
when quad motors are providing assistance don't see the fly-forward
flag in the AHRS. This will lower the chance of EKF yaw confusion
2017-05-01 14:27:45 +10:00
Andrew Tridgell
954905e0eb
Plane: allow battery failsafe with usb connected
...
some people connect USB to allow connections from a companion
computer. The arming check is sufficient to prevent unwanted battery
failsafes when bench testing
2017-04-28 16:33:49 +10:00
Andrew Tridgell
516bf26719
Plane: fixed QRTL change when coming from loiter
...
the nav controller can think we have already reached the loiter target
if we were last in a LOITER when we switch to RTL. In that case it
would switch to QRTL immediately
found by Leonard (thanks!)
2017-04-24 16:28:59 +10:00
Eugene Shamaev
ca84ab36be
Plane: AOA and SSA estimations are added to parameters and data logs
2017-04-19 20:48:42 +10:00
Andrew Tridgell
17ba8b3304
Plane: raise logging rate for PID and servos
2017-04-09 16:45:19 +10:00
Andrey Kolobov
35d406aeab
Plane: added a soaring controller to Arduplane
2017-03-14 08:53:10 +11:00
Michael du Breuil
1bb806edb2
Plane: Use new landing interfaces
2017-03-02 12:38:59 +11:00
Andrew Tridgell
3bb25eb194
Plane: added Q_TAILSIT_INPUT
...
this allows the user to control tailsitters either in body frame (like
a plane) or in earth frame (like a multicopter). This is useful for
people wanting to learn to fly prop-hang on 3D planes
2017-02-26 09:20:13 +11:00
Andrew Tridgell
c787f4c56f
Plane: initial support for tailsitter transitions
2017-02-18 17:26:43 +11:00
Michael du Breuil
29b16dbafd
Plane: Refactor to request relative altitudes from AHRS
...
Removes the need for plane to do the math for finding the relative height.
Also caches the value at the same time we update current_loc, which is a
non behaviour change as that was the only time you could see a change in
the relative height propegate through the system anyways
2017-02-13 09:23:14 +11:00
Tom Pittenger
1a34221db9
Plane: remove old commented code
...
- leftover from the AP_Landing stage refactor
2017-01-26 13:45:28 -08:00
Michael du Breuil
4cf1c74c62
AP_Landing + Plane: Check for land complete before requesting disarm
2017-01-26 13:11:44 -08:00
Tom Pittenger
2ccd91d88f
AP_Landing: rename stage enum
2017-01-26 13:11:44 -08:00
Tom Pittenger
650e694eb1
Plane: move landing.reset to landing.do_land()
2017-01-26 13:11:44 -08:00
Tom Pittenger
61bc0a6206
Plane: check stage==LAND instead of landing.in_progress
2017-01-26 13:11:44 -08:00
Michael du Breuil
3e66dd10d7
Plane: Move landing stages inside AP_Landing and refactor
2017-01-26 13:11:44 -08:00
Tom Pittenger
6c0296ba13
AP_Landing: shadow copy of plane flight_stage into landing
...
.. and describe stages without using specific stage name
2017-01-26 13:11:43 -08:00
Randy Mackay
fc4741395d
Plane: notify initialised after parameters loaded
2017-01-23 15:07:21 -08:00
Andrew Tridgell
081909bf6a
Plane: removed use of pwm_to_angle()
2017-01-12 17:39:37 +11:00
Andrew Tridgell
b83f50be0f
Plane: use new SRV_Channels API
2017-01-12 17:39:37 +11:00
Tom Pittenger
063f517424
Plane, TECS, AP_Landing: rename stage LAND_ABORT to ABORT_LAND
...
this will reduce confusion when searching for FLIGHT_LAND_* and you get a bunch of takeoff related hits. It will also make more sense when the landing library fully manages the FLIGHT_LAND stage entirely because it will not mange FLIGHT_LAND_ABORT
2016-12-30 23:50:03 -08:00
Tom Pittenger
04f32b6ec6
Plane: simplify flight stage landing check to use landing.in_progress
2016-12-30 23:50:03 -08:00
Tom Pittenger
84e11fd899
Plane, AP_TECS: do not pass auto_land flag to TECS, it already knows it
2016-12-30 23:50:03 -08:00
Tom Pittenger
c286ceba43
Plane: move enum FlightStages to AP_Vehicle::FixedWing
2016-12-30 23:50:03 -08:00
Tom Pittenger
b7b56b94a3
Plane: convert landing.complete to landing.is_complete()
2016-12-14 04:32:30 -08:00
Tom Pittenger
4b683edac9
Plane: simplified logic where landing complete overrides the calc value
2016-12-14 04:32:30 -08:00
Tom Pittenger
83f0a8114b
Plane: use a common reset for uniform landing wipe
2016-12-14 04:32:30 -08:00
Tom Pittenger
8c1509ad47
Plane: abstract land abort request method
2016-12-14 04:32:30 -08:00
Randy Mackay
c3b6fd4315
Plane: fix suppressing comment for case fall through
...
No functional change
eclipse stops complaining if no-break is used in place of fall-through
2016-12-14 13:22:15 +09:00
Tom Pittenger
a3ccca17ff
Plane: use fabsf instead of fabs
2016-12-06 17:38:47 -08:00
Peter Barker
669dc01b67
Plane: correct on_flight_line landing stage check
2016-12-06 03:24:41 -08:00
Tom Pittenger
9dd46aa03a
Plane: post msg if aborting via throttle
...
fixes https://github.com/ArduPilot/ardupilot/issues/4906
2016-12-02 17:40:01 -08:00
Peter Barker
17f5ef4610
Plane: inform dataflash of vehicle arm state
2016-11-28 09:42:09 -08:00
Tom Pittenger
dc85ffa834
Plane: move jump_to_landing_sequence() to AP_Mission
2016-11-25 19:07:30 -08:00
Tom Pittenger
ac1dced3bf
Plane: set landing params as private and use accessors
2016-11-25 19:07:30 -08:00
Tom Pittenger
e919afad1e
Plane: update comment and remove redundant work
...
- update_flight_stage is already called within restart_landing_sequence()
2016-11-25 19:07:30 -08:00
Tom Pittenger
fc2f518f31
Plane: revert auto_state.checked_for_autoland back to Plane
2016-11-25 19:07:30 -08:00
Tom Pittenger
9a79b79f1e
AP_Landing: port more from plane
2016-11-25 19:07:30 -08:00
Tom Pittenger
5dbb2d4c2a
Plane: move two functions out of landing.cpp
...
- these two functions will be hard to port to AP_Landing due to complex dependancies so we'll defer them by moving them ArduPlane.cpp
2016-11-25 19:07:30 -08:00
Tom Pittenger
d2376b7c8b
Plane: migrate two helper functions to AP_Landing
...
- move functions restart_landing_sequence() and jump_to_landing_sequence() to AP_Landing
- NOTE: jump_to function can not set mode, so it is now done externally in vehicle
2016-11-25 19:07:30 -08:00
Tom Pittenger
896b931a7c
Plane: Move auto_state variables to AP_landing members
2016-11-25 19:07:30 -08:00
floaledm
bae9ce20c1
Plane: update sensor status error flags independently of sending a sys_status message
2016-11-02 08:36:58 +11:00
murata
ab99ea54eb
Plane: To nullptr from NULL.
2016-10-29 10:32:05 -03:00
Peter Barker
98ae6c776a
Plane: support for AP_Stats (flight time, bootcount, runtime)
2016-10-29 14:53:25 +09:00
Andrew Tridgell
b65c559558
Plane: updates for EKF API changes
2016-10-27 17:09:06 +11:00
priseborough
72db2ebd81
Plane: Add compensation for optical flow sensor body position offset
2016-10-27 14:54:42 +11:00
Mathieu OTHACEHE
152edf7189
Global: remove mode line from headers
...
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Ferrin Benjamin Katz
38581669ec
Plane: slow down home update
...
Moved the code theat updates the home position while the aircraft is
unarmed from 10hz loop to one second loop and ensured that is does not
update more then once every 5 seconds. Closes issue 4311.
2016-10-17 09:50:25 +11:00
murata
2f18d1de73
Plane: To add a judgment of 0 degrees longitude.
2016-10-04 08:15:23 -07:00
Andrew Tridgell
9b83781b4f
Plane: fixed mixer arming error with FMUv4
...
thanks to Tim Gold for reporting this
2016-09-11 08:25:40 +10:00
floaledm
71921f3aa4
Plane: removed frsky_telemetry_send scheduled task
2016-08-25 10:16:17 +10:00
Tom Pittenger
b187e1f9a6
Plane: add reason to set_mode()
2016-08-17 22:38:54 -07:00
Tom Pittenger
285e41bac6
Plane: add avoidance_adsb framework for object avoidance
2016-08-17 22:38:54 -07:00
Tom Pittenger
ca32bcc58d
Plane: add new flight mode AVOID_ADSB to mimic GUIDED
2016-08-17 22:38:54 -07:00
Tom Pittenger
c4460a285c
Plane: remove adsb sensor library based avoidance
...
adsb based avoidance has been moved to AP_Avoidance library
2016-08-17 22:38:54 -07:00
Andrew Tridgell
adb5a3ee1f
Plane: re-work AFS for new AP_AdvancedFailsafe API
2016-08-16 12:55:51 +10:00
Andrew Tridgell
5d6dfd927b
Plane: changes for AP_AdvancedFailsafe naming
2016-08-16 12:55:50 +10:00
Tom Pittenger
f85fc7c1dc
Plane: pass in max airspeed via function call instead of using aparm
2016-08-08 00:02:42 -07:00
Tom Pittenger
fc50f145ce
Revert "ArduPlane: Convert references to AP_Airspeed. Added automatic migration of ARSPD_FBW_MIN and ARSPD_FBW_MAX (plane parameter) to ARSPD_FBW_MIN and ARSPD_FBW_MAX (library parameter)."
...
This reverts commit da1b18d918
.
2016-08-07 17:54:24 -07:00
AndersonRayner
da1b18d918
ArduPlane: Convert references to AP_Airspeed. Added automatic migration of ARSPD_FBW_MIN and ARSPD_FBW_MAX (plane parameter) to ARSPD_FBW_MIN and ARSPD_FBW_MAX (library parameter).
2016-08-04 10:09:04 -07:00