Andrew Tridgell
39153a1c01
AP_HAL_ChibiOS: removed native_millis/micros
2023-08-24 13:06:40 +10:00
Peter Barker
81326a17db
hwdef: qiotek: correct HAL_BATT_MONITOR_DEFAULT define name
2023-08-23 17:20:20 +10:00
Tom Pittenger
ed43f095ce
AP_HAL_ChibiOS: add AP_BATTERY_ESC_TELEM_OUTBOUND_ENABLED to defaults_periph
2023-08-22 16:14:36 -07:00
Andy Piper
37a3f85a9a
AP_HAL_ChibiOS: add 8 bi-directional dshot channels to KakuteH7-Wing
2023-08-22 11:08:14 +10:00
Andrew Tridgell
aaec99ae31
hwdef: removed baro from HolybroG4_GPS
...
not included in production versions, and baro is not generally a good
idea on a GPS due to impact of airflow
also disable unused IMU, SPI bus and 2nd I2C and re-enable 2nd CAN as
helical units have dual CAN
2023-08-22 09:37:20 +10:00
Peter Barker
efa680f1e0
AP_HAL_ChibiOS: add hwdef for bootloader for MatekL431-RC
2023-08-20 17:37:44 +10:00
Peter Barker
ca549e1887
hwdef: add MatekL431-RC for RC input
2023-08-19 20:27:24 +10:00
Peter Barker
103caac92c
AP_HAL_ChibiOS: add support for DroneCAN RCInput packets
2023-08-19 20:27:24 +10:00
Tom Pittenger
27f9a54a54
AP_HAL_ChibiOS: fix CubeRed default MAC Address
2023-08-17 13:51:54 +10:00
Peter Barker
bb6f0ae527
AP_HAL_ChibiOS: improve gating of use of AP_InternalError library
...
- gate calls into library directly on the define
- INTERNAL_ERROR becomes empty if library not compiled in
2023-08-17 09:16:46 +10:00
Peter Barker
c2f4fb5def
hwdef: use APJ_BOARD_ID mapping for ACNS-CM4Pilot
2023-08-17 09:13:54 +10:00
Peter Barker
19bd97a893
chibios_hwdef.py: permit board ID to be specified as a string
2023-08-17 09:13:54 +10:00
Peter Barker
b8978ad73a
hwdef: explicitly state no-bootloader-embedding on some boards
2023-08-17 08:37:31 +10:00
Peter Barker
a11df25490
chibios_hwdef.py: enforce presence of bootloader if embedding desired
2023-08-17 08:37:31 +10:00
yunjiuav
f92073fa4d
HAL_ChibiOS: modify APJ_BOARD_ID of YJUAV_A6SE
2023-08-17 08:35:18 +10:00
Andy Piper
7896b04365
AP_HAL_ChibiOS: betafpv F450 AIO hwdef
2023-08-16 17:51:23 +10:00
Henry Wurzburg
b1fc5bd69f
AP_HAL_ChibiOS: add missing bootloader binaries
2023-08-16 17:49:00 +10:00
Peter Barker
7273c8416a
AP_HAL_ChibiOS: prevent Periph bricking problem when paniccing early
...
if Periph panics before we mark the scheduler as initialised then we don't watchdog, which we really need to do on periph nodes so they can be re-flashed conveniently.
2023-08-16 17:21:30 +10:00
yjuav
ac993753eb
Modify the LED light pins and adjust the direction of the IMU and COMPASS sensors.
2023-08-15 08:35:26 +10:00
yunjiuav
5671e502d3
HAL_ChibiOS: added YJUAV_A6SE support
2023-08-15 08:35:26 +10:00
Andy Piper
75c1ad6efa
AP_HAL_ChibiOS: explicitly set dshot rate when using iomcu
2023-08-15 06:53:48 +10:00
Andy Piper
c6c78a9c32
AP_HAL_ChibiOS: ensure reverse and reversible masks are applied to iomcu
2023-08-15 06:53:48 +10:00
Andy Piper
52dbac1de7
AP_HAL_ChibiOS: run STM32F103 core clock at 72Mhz on 24Mhz oscillators
2023-08-15 06:53:48 +10:00
Andy Piper
33c40eaba3
AP_HAL_ChibiOS: add iomcu dshot for Pixhawk1, Pixhawk5X and fmuv5
2023-08-15 06:53:48 +10:00
Andy Piper
876f4f7a8f
AP_HAL_ChibiOS: dshot iofirmware for Durandal, Pixhawk6C, CubePurple and CubeYellow
2023-08-15 06:53:48 +10:00
Andy Piper
1c646d2986
AP_HAL_ChibiOS: use f103 iofirmware for Pixhawk6X
2023-08-15 06:53:48 +10:00
Andy Piper
c057cc5485
AP_HAL_ChibiOS: add get_output_mode() and use it to print correct banner for iomcu
...
add support for undef of STM32 lines and DMA_NOMAP
add support for F103 running at 24Mhz
add f103 variants of iofirmware
reduce memory usage in iomcu for new model
correct pwm output reporting
split iofirmware into config + mcu to allow f103 definition
don't enable non-existant timers on F103
2023-08-15 06:53:48 +10:00
Andy Piper
83fddd0d61
AP_HAL_ChibiOS: enable iomcu-dshot on CubeBlack
2023-08-15 06:53:48 +10:00
Andy Piper
10a612566a
AP_HAL_ChibiOS: ensure shared DMA works in IOMCU
...
enable TIM4 in shared mode on IOMCU for dshot
stop the PWM peripheral in rcout DMA swapping on IOMCU to prevent UART corruption
provide debugging options on iomcu dshot
support unshared DMA with iomcu dshot
optimize rcout on iomcu
tune iomcu stack for 8 channels
2023-08-15 06:53:48 +10:00
Andy Piper
3c42f1b7d9
AP_HAL_ChibiOS: disable stack checking on iomcu
2023-08-15 06:53:48 +10:00
Andy Piper
837c81af5e
AP_HAL_ChibiOS: fix sending of dshot commands to all channels
2023-08-15 06:53:48 +10:00
bugobliterator
9a21297cd1
AP_HAL_ChibiOS: add support for DShot on IOMCU
...
set timer counter size to be a byte wide
use HAL_DSHOT_ENABLED instead of DISABLE_DSHOT
build iomcu-dshot from existing iomcu
correct defines for DMAR size on iomcu
allow iomcu dshot rate to be configured from FMU
correct DMA allocation for dshot on iomcu
allow debug builds on iofirmware
ensure dshot is enabled on iomcu dshot
support proper iomcu dshot output thread triggered by FMU
allow selective disablement of serial LEDs and passthrough
disable serial LEDs and passthrough on iomcu-dshot
propagate ESC telemetry to iomcu
dshot_send_groups() for iomcu
remove use of ICU on iomcu for dshot. only allocate possible DMA channels
rename serial passthrough and dshot defines
update dshot docs
resize dshot iomcu main stack to minimum
correct dshot prescaler usage and bit_width_mul calculation
use ChibiOS in tickless mode on iomcu-dshot so that virtual timers can be used
propagate dshot commands to iomcu
passthrough oneshot125 to iomcu
2023-08-15 06:53:48 +10:00
Andy Piper
f233a65580
AP_HAL_ChibiOS: add global interrupt handlers for TIM15 and TIM17 on F1
2023-08-15 06:53:48 +10:00
alexklimaj
738a4c638a
hwdef: arkv6x default to no IO MCU
2023-08-14 12:06:25 +10:00
Andy Piper
205e6bebc7
AP_HAL_ChibiOS: fix incorrect removal of HAL_I2C_INTERNAL_MASK undef in SkystarsH743HD
2023-08-12 14:00:11 +10:00
Tom Pittenger
2b30fbcfb2
AP_HAL_ChibiOS: disable RPM by default on Periph
2023-08-11 13:31:45 -07:00
Peter Barker
e638925ee0
AP_HAL_ChibiOS: chibios_hwdef.py: fix minor bugs
...
also mark as flake8-clean
2023-08-11 10:41:02 +10:00
Peter Barker
536f3ac922
chibios_hwdef.py: minor flake8 fixes
...
whitespace, long lines, ambiguous variables etc
2023-08-11 10:41:02 +10:00
Andy Piper
f787e940b3
AP_HAL_ChibiOS: change incorrect I2C internal mask from SkystarsH7HD bdshot
2023-08-10 16:16:16 +10:00
Andy Piper
9212a24248
AP_HAL_ChibiOS: properly support CRSF on HEEWING-F405
...
update HeeWing F405 README to reflect VTX pinout
2023-08-09 17:44:14 +10:00
Peter Barker
ceab0180ec
AP_HAL_ChibiOS: remove use of HAL_BUILD_AP_PERIPH
...
turn torqeedo off in chibios_hwdef.py instead for Periph
2023-08-09 17:39:49 +10:00
Peter Barker
68e3b1e79b
AP_HAL_ChibiOS: move rangefinder rotation default down into AP_Periph
2023-08-09 17:39:49 +10:00
Peter Barker
67988320a7
hwdef: disable sending of RELAY_STATUS on mimimized boards
2023-08-09 07:44:07 +10:00
Andy Piper
fe56a6aedd
AP_HAL_ChibiOS: allow 8 bdshot channels on mRoControlZeroH7
2023-08-08 11:50:56 +10:00
Peter Barker
53d5d1b9a9
AP_HAL_ChibiOS: break out include files for firmware defaults
2023-08-08 11:45:50 +10:00
Peter Barker
009172685e
AP_HAL_ChibiOS: avoid use of MINIMIZE_FEATURES define in Copter directory
2023-08-08 10:35:19 +10:00
Peter Barker
646704c5dc
AP_HAL_ChibiOS: remove MINIMIZE_FEATURES define
2023-08-08 10:35:19 +10:00
Michael du Breuil
c1e6f130dd
AP_HAL_ChibiOS: CubeOrange map EXTERN_DRDY and !EXTERN_CS to ADC
2023-08-08 09:16:56 +10:00
Peter Barker
37de51f1d4
hwdef: remove un-needed lines in KakuteH7 config
...
these are the default values, and KakuteH7 isn't minimized
2023-08-06 17:36:25 -07:00
Andrew Tridgell
0333e92cbc
hwdef: update SIYI_N7 hwdef
...
the N7 isn't the same as the Durandal. It has 1 CAN bus, and 2 less
UARTs, and an extra compass. This fixes the hwdef.dat to match the
schematic
2023-08-06 09:23:45 +10:00