Bob Long
3982d576eb
autotest: plane: enable ICE frames in FlyEachFrame
...
Now that starter control is an aux channel, engine commands are no
longer blocked by default, so it's easy to enable ICE frames by adding
an engine start command to the beginning of the missions.
2024-12-19 22:11:00 +11:00
Bob Long
dee88b4ecb
SITL: default SIM_ENGINE_MUL to 0
...
This makes SIM_ENGINE_FAIL work a little more intuitively, since it is
usually used to simulate a complete failure.
Also, drive-by fix of the SIM_ENGINE_MUL documentation.
2024-12-18 18:06:50 +11:00
Iampete1
a9ecb4428b
Tools: autotest: defualt_params: quadplane: fix yaw rate tune typo.
2024-12-12 21:52:02 +00:00
Michelle Rossouw
cf1a4b6501
autotest: Added Quicktune C++ tests
...
for quadplane and copter
2024-11-27 14:07:38 +11:00
Andrew Tridgell
7e4a85ba3f
autotest: adjust default quadplane tune
2024-11-27 14:07:38 +11:00
Peter Barker
7b64263562
Tools: add ability to simulate more than 2 GPSs
2024-11-20 15:07:45 +11:00
Andrew Tridgell
f48b0375d8
autotest: improved GliderPullup test
...
use LOITER_TO_ALT and a landing, allowing for a much better test of
the full glider pullup mission
2024-10-01 07:15:44 +10:00
Andrew Tridgell
fc2f518934
autotest: added CopterTailsitter test
...
test rearward rangefinder
2024-09-14 08:39:51 +10:00
Peter Barker
c3d89ed9d1
autotest: remove unused parameters from Blimp defaults file
2024-08-27 12:00:03 +10:00
Iampete1
44ae148718
Tools: autotest: defualt params: update plane-ice for ICE start stop function
2024-08-27 09:37:34 +10:00
Peter Barker
b9158c0491
autotest: remove unused parameters for quadplane-copter-tailsitter
2024-08-27 08:54:10 +10:00
Peter Barker
c56439b045
autotest: quadplane-cl84: remove old parameter
2024-08-26 20:41:19 +10:00
Rhys Mainwaring
0272f59d0c
Tools: autotest: add rover-omni3mecanum
...
- Add frame rover-omni3mecanum.
- Remove params with default values.
Signed-off-by: Rhys Mainwaring <rhys.mainwaring@me.com>
2024-07-23 13:27:04 +10:00
bnsgeyer
2809b160ae
Tools: update heli-dual params
2024-06-30 18:21:21 -04:00
Andrew Tridgell
060818a0e1
Tools: fixed default glider parameters
2024-06-30 10:02:15 +10:00
Andrew Tridgell
1da50110d8
Tools: added Glider SITL model
2024-05-05 07:57:54 +10:00
Andrew Tridgell
0bccd71201
Tools: added StratoBlimp to autotest
2024-04-27 22:03:05 +10:00
Tatsuya Yamaguchi
3b51278481
Tools: autotest: added HEXA X
2024-04-18 08:25:41 +10:00
Clyde McQueen
50015b4196
autotest: reduce SITL baro noise
2024-04-12 14:07:12 -03:00
Peter Barker
0e4b41baa6
Tools: rename GPS_ to GPS1_
2024-03-19 19:50:12 +11:00
Peter Barker
89bdb14916
Tools: adjust for GPS parameter renames
2024-03-19 19:50:12 +11:00
Peter Barker
21a01c5587
AP_GPS: remove dead GPS_MINDGPS variable
2024-02-22 14:41:29 +11:00
Peter Barker
e72a39353e
default_params: rename vee-gull parameters to remove space
2024-02-22 14:41:29 +11:00
Clyde McQueen
f9db039dcc
Sub: add SURFTRAK mode
2024-02-21 18:59:20 -03:00
Peter Barker
e4fc55f282
autotest: add test that tracker can use moving baseline yaw
2024-02-21 16:56:25 +11:00
Andrew Tridgell
e9c59bf3ae
autotest: fixed the 'X' frame
2024-02-19 14:30:13 +11:00
Andrew Tridgell
1d08662c72
autotest: fixed parameters for tilt quadplanes
...
and enable autotest of the disabled tilt quadplane frames
2024-02-18 16:28:43 +11:00
Andrew Tridgell
1341abc6b4
Tools: fixed name of pitch limit parameters
2024-01-23 15:00:30 +11:00
Andrew Tridgell
7de56d434c
Tools: fixed parameter names
2024-01-23 15:00:30 +11:00
Andrew Tridgell
af420746ee
Tools: param file TRIM_PITCH_DEG to PTCH_TRIM_DEG
2024-01-23 15:00:30 +11:00
Andrew Tridgell
2f5cb42030
Tools: convert param files for LAND_PITCH_DEG
2024-01-23 15:00:30 +11:00
Andrew Tridgell
7a57ac640f
Tools: convert param files LIM_ROLL_CD -> ROLL_LIMIT_DEG
2024-01-23 15:00:30 +11:00
Andrew Tridgell
badf8fabdd
Tools: convert param files for pitch limits
2024-01-23 15:00:30 +11:00
Andrew Tridgell
a06b2d7328
Tools: param rename for CRUISE_ALT_FLOOR
2024-01-23 15:00:30 +11:00
Andrew Tridgell
e0cd06cc83
Tools: fixed name of TRIM_PITCH_DEG
2024-01-23 15:00:30 +11:00
Andrew Tridgell
286f6887bd
Tools: convert ALT_HOLD_RTL and ALT_HOLD_FBWCM
2024-01-23 15:00:30 +11:00
Andrew Tridgell
863f25e645
Tools: convert ARSPD_FBW_MIN/MAX to AIRSPEED_MIN and AIRSPEED_MAX
2024-01-23 15:00:30 +11:00
Andrew Tridgell
4fea71246d
Tools: change TRIM_ARSPD_CM to AIRSPEED_CRUISE
2024-01-23 15:00:30 +11:00
Tim Tuxworth
afc093a9b2
autotest: change default params from TRIM_PITCH_CD to TRIM_PITCH_DEG
2024-01-23 15:00:30 +11:00
Michael du Breuil
a45353b17f
autotest: Update tests for relay
2023-12-19 10:01:01 +11:00
Andrew Tridgell
a60c449833
autotest: enable ADSB on ADSB SITL periph
2023-10-02 21:45:28 +11:00
Randy Mackay
3f531d18bc
Tools: SITL default tricopter yaw servo trim fix
2023-09-19 10:53:04 +10:00
Randy Mackay
df0dad79bf
Tools: SITL default copter yaw tune improvement
2023-09-19 10:53:04 +10:00
Peter Barker
588364dad0
autotest: set ICE_RPM_THRESH for quadplance-ice
...
without this we continuously try to restart the motor as the minimum thrust output from the ICE is translated into a value less than the default ICE_RPM_THRESH (so the ICENgine library believes the engine to be stopped, when it is really just at idle).
2023-08-26 21:21:49 +10:00
Andrew Tridgell
6643231b2e
autotest: implement parameter files per peripheral in CI tests
...
this allows for one peripheral to have ESCs and the other not
2023-08-24 13:06:40 +10:00
Andrew Tridgell
52d80241b9
autotest: added quadplane-can vehicle
...
setup with all CAN peripherals
2023-08-24 13:06:40 +10:00
Andrew Tridgell
52a2824085
autotest: fixed periph param defaults
2023-08-24 13:06:40 +10:00
Andrew Tridgell
9665959e84
autotest: added default params for periph
2023-08-24 13:06:40 +10:00
Michelle Rossouw
aa09b0b409
Tools: Update blimp parameters for more realistic dynamics
2023-08-21 21:01:47 +10:00
Tom Pittenger
bb8b901dd2
Tools/autotest: reduce LAND_DISARMDELAY to 3 for Plane CI
2023-08-21 18:49:21 +10:00
