Commit Graph

2342 Commits

Author SHA1 Message Date
Tom Pittenger b6196dfa92 Plane: compiler warning in print: float to double promotion 2016-06-13 14:03:40 -07:00
Andrew Tridgell 107691b7a7 Plane: fixed initial descent rate in quadplane auto land 2016-06-11 14:37:44 +10:00
Andrew Tridgell f8e0e91cbd Plane: prepare for 3.6.0 2016-06-11 09:20:05 +10:00
Andrew Tridgell eb8cd13a50 Plane: update release notes for 3.6.0 2016-06-11 09:19:13 +10:00
Andrew Tridgell e05c7b3367 Plane: check if terrain following is enabled in AGL calculation 2016-06-10 17:48:32 +10:00
Andrew Tridgell 19834c12e2 Plane: log start of quadplane transition 2016-06-10 17:48:32 +10:00
Andrew Tridgell 8156b3f7de Plane: fixed quadplane landing transition altitude 2016-06-10 17:48:32 +10:00
Andrew Tridgell 07564aa03f Plane: fixed an attitude control bug in quadplane transition
The motors would briefly spike at the end of the transition which
could cause a major pitch deviation
2016-06-10 17:48:32 +10:00
Tom Pittenger 69f29b51d1 Plane: new param Q_VFWD_ALT to disable VFWD motor below this altitude. Also uses rangefinder 2016-06-10 17:48:31 +10:00
Andrew Tridgell 021aebeac0 Plane: check for high ratio of rmsD to rmsP in tuning 2016-06-10 17:48:31 +10:00
Tom Pittenger 65e0e31a7a Plane: parachute low-alt check should not require auto mode to ever be set 2016-06-08 08:15:11 -07:00
Tom Pittenger 204abfd45e Plane: set heartbeat.system_status to Critical for low-battery failsafe events 2016-06-07 17:14:51 -07:00
Tom Pittenger 263931b4b1 Plane: allow manual parachute releases on the ground 2016-06-07 09:02:09 -07:00
Tom Pittenger ef3d17cc4c Plane: parachute code can not rely on is_flying() because it is unreliable in a stalled aircraft 2016-06-07 09:01:29 -07:00
Tom Pittenger 3140ce6ab6 Plane: change MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT gcs msg to remove abbreviations. Hope it fits! 2016-06-07 08:28:35 -07:00
Tom Pittenger bd270720da Plane: whitespace formatting 2016-06-07 08:27:40 -07:00
Michael Day 429e348824 Plane: Can now change current WP alt via mavlink.
Uses the mavlink msg SET_POSITION_TARGET_GLOBAL_INT
2016-06-07 08:16:39 -07:00
Tom Pittenger 01e636065d Plane: non-functional: mostly whitespace and removed extra set result statement 2016-06-07 08:11:05 -07:00
Michael Day 2c0f0a04d8 Plane: Only allow speed changes in GUIDED and AUTO modes. 2016-06-07 08:22:44 -04:00
Michael Day cdeef9d692 Plane: Fence breaches can go to RTL mode with new FENCE_ACTION setting. 2016-06-07 15:46:52 +10:00
E Thomas 7d824247af Differential spoilers support, elevon offset
Fixed differential spoilers support, added elevon offset
See PR #2935
2016-06-06 21:55:50 -07:00
Michael du Breuil 037a7980d6 Plane: fix calculation of override PWM 2016-06-06 16:23:43 -07:00
Tom Pittenger ee29f38cdf Plane: moved takeoff flap check to NORMAL checks.
TODP: add new flight stage FLIGHT_PRE_TAKEOFF to put this sort of thing into
2016-06-06 14:51:24 -07:00
Samuel Rosenstein 296b279f0d Plane: fixed issue with preflight flaps. Flaps now go down in preflight mode 2016-06-06 14:18:44 -07:00
Michael du Breuil 41bb237799 Plane: remove throttle surpressed message 2016-06-06 15:24:18 +10:00
Andrew Tridgell 5a544002cb Plane: fixed memory leak in mixer setup 2016-06-06 15:21:17 +10:00
Michael du Breuil bb9086b87f Plane: setup mixer in the one second loop when disarmed 2016-06-06 15:17:37 +10:00
Michael du Breuil fc3ab7b691 Plane: rename var to avoid a var with the name of a c++ keyword 2016-06-06 15:17:15 +10:00
Andrew Tridgell c54d553df1 Plane: prevent continually loading the mixer 2016-06-06 15:14:28 +10:00
Michael du Breuil 7f73da535a Plane: if setting a mixer fails then clear the last crc so that it will be attempted again 2016-06-06 07:50:43 +10:00
Andrew Tridgell eae2bf54ca Plane: fixed gcc 6.1 build error 2016-06-06 07:43:45 +10:00
Andrew Tridgell 8d3a58f0a2 Plane: allow tuning of more parameter sets 2016-06-04 19:20:31 +10:00
Andrew Tridgell 835235127c Plane: prevent divide by zero in SITL
harmless on PX4
2016-06-04 19:20:18 +10:00
Tom Pittenger b9cee76bbe Plane: fix quadplane integrator to always clip to at least 0 to throttle_max 2016-06-03 23:46:18 -07:00
Tom Pittenger 82763ec8a9 Plane quadplane to use relative_ground_altitude() to take advantage of rangefinder easier 2016-06-03 23:44:21 -07:00
Tom Pittenger f3ceee5389 Plane: use relative_ground_altitude 2016-06-03 23:43:54 -07:00
Tom Pittenger b3f182157c Plane: take advantage of rangefinder support in relative_ground_altitude() 2016-06-03 23:43:43 -07:00
Andrew Tridgell 77b7852ff0 Plane: adjust recommend ranges for quadplane Q_VFWD_GAIN and Q_WVANE_GAIN 2016-06-04 11:04:15 +10:00
Tom Pittenger a596aa5907 Plane: do not log CURR.Throttle because it's already logged elsewhere 2016-06-02 16:59:13 -07:00
Tom Pittenger f83a6ca1ff Plane: fixed variable misspelling 2016-06-02 15:10:51 -07:00
Andrew Tridgell 978a89efa6 Plane: added new ESC calibration method 2016-06-02 18:10:37 +10:00
Andrew Tridgell 860587ece7 Plane: disable parachute checks when min alt is zero 2016-06-02 18:07:16 +10:00
Peter Barker ee5290c178 Plane: avoid switch statement for enabling fence if no fence present 2016-06-02 14:37:21 +10:00
Tom Pittenger 954c987075 Plane: do not parse GEOFENCE packets when geofence is disabled via compile option 2016-06-01 17:38:52 -07:00
Tom Pittenger af1407a155 Plane: disable parachute code when not enabled via compile option 2016-06-01 17:38:51 -07:00
Tom Pittenger ea9e39212f Plane: use new check_latlng helper 2016-06-01 17:38:51 -07:00
Andrew Tridgell da5ce37bbc Plane: fixed gain on -ve stick mixing past 50%
fixed a sign error in calculating gain on -ve stick mixing beyond 50%
input

thanks to Doug Weibel for a log that showed this effect
2016-06-02 08:07:55 +10:00
Andrew Tridgell b17c800f44 Plane: use axis specific tuning controller error
this gives user feedback on the axis they are tuning
2016-06-01 17:19:33 +10:00
Tom Pittenger a80a87eb09 Plane: simplify TECS prep logic by utilizing auto_state.land_in_progress 2016-05-31 09:46:52 -07:00
Tom Pittenger 4db5b80b37 Plane: add flag for auto_state.land_in_progress 2016-05-31 09:46:51 -07:00
Tom Pittenger 4ebaab86ec Plane: override is_flying for quadplane 2016-05-31 09:46:50 -07:00
Peter Barker 28361afc2a Plane: move telemetry_delayed up into base class 2016-05-31 08:46:09 +10:00
Peter Barker 9ee62aac30 Plane: move adjust_rate_for_stream up 2016-05-29 19:38:50 +10:00
Peter Barker af5a52e2aa Plane: subclass GCS_MAVLink in place of defining its functions for it 2016-05-29 16:21:21 +10:00
Andrew Tridgell f96836ab9a Plane: prevent a discrepancy between EKF origin and home for altitude 2016-05-29 15:47:26 +10:00
Andrew Tridgell ba3576f027 Plane: added tuning error reporting for quadplanes 2016-05-28 17:33:30 +10:00
Andrew Tridgell b56d784ae4 Plane: limit to zero pitch in quadplane on initial transition 2016-05-28 15:08:46 +10:00
Andrew Tridgell 20cf326093 Plane: lower throttle threshold for quadplane is_flying 2016-05-28 07:10:13 +10:00
Tom Pittenger e3930b45df Plane: force the safety_state immediately because we want it to be in effect while we make mixer changes 2016-05-27 21:34:40 +10:00
Tom Pittenger 4785650c95 Plane: remove redundant calls to safety_state 2016-05-27 21:34:40 +10:00
Andrew Tridgell 9933069679 Plane: fixed motor test by percentage in quadplane 2016-05-27 11:53:20 +10:00
Andrew Tridgell 191d6df0ea Plane: moved EKF2 to a new parameter index
the meanings of many of the parameters have changed. Best to use a new
index to prevent old parameters from causing crashes
2016-05-25 19:35:17 +10:00
Andrew Tridgell 6e4c0dd3d7 Plane: allow non-blocking calibrations while armed 2016-05-24 17:10:41 +10:00
Andrew Tridgell 0f50f483b8 Plane: update for new airspeed calibration 2016-05-24 17:00:56 +10:00
Andrew Tridgell d3494d1369 Plane: don't stall EKF during baro cal 2016-05-24 17:00:56 +10:00
Andrew Tridgell 5b4bbf08fd Plane: use send_heartbeat wrapper 2016-05-21 15:25:18 +10:00
Andrew Tridgell 4a7dea0c5b Plane: simplify UART setup 2016-05-21 15:25:16 +10:00
Andrew Tridgell 9f47e6417b Plane: always build with MAVLink2 headers 2016-05-21 15:25:16 +10:00
Andrew Tridgell 309dbef2ec Plane: fixed mavlink1 dependency on px4 2016-05-21 15:25:15 +10:00
Andrew Tridgell eee06da1b5 Plane: use HAVE_PAYLOAD_SPACE() 2016-05-21 15:25:14 +10:00
Andrew Tridgell be14714fa4 ArduPlane: update signing timestamp on GPS lock 2016-05-21 15:25:13 +10:00
Andrew Tridgell a103e70460 ArduPlane: handle SETUP_SIGNING message 2016-05-21 15:25:13 +10:00
Andrew Tridgell b7fe96188d Plane: raise range of THR_FS_VALUE
need to cope with reversed throttle
2016-05-21 07:39:02 +10:00
Andrew Tridgell e0a9a8196c Plane: fixed throttle failsafe with THR_PASS_STAB=1
this prevents using pass-thru throttle when in throttle failsafe
2016-05-21 07:39:02 +10:00
Don Gagne 151686ce9d ArduPlane: SET_SENSORS_OFFSETS support for third compass 2016-05-19 18:51:17 -03:00
Tom Pittenger 36a1054f77 Plane: remove Tom Pittenger as an author since he's now listed as a lead 2016-05-17 19:16:02 -07:00
Tom Pittenger c9167f89eb Plane: add Tom Pittenger as co-lead developer 2016-05-17 19:03:38 -07:00
Tom Pittenger 30c5c9eb5d Plane: log SONR.DistCM in cm as SONR.Dist as meters 2016-05-17 18:59:37 -07:00
Tom Pittenger 00863623d7 Plane: SONR logging, remove BaroAlt,GSpd,Thr 2016-05-17 18:59:22 -07:00
Tom Pittenger b2fb2f3949 Plane: optimize millis() calls by reusing result 2016-05-17 18:59:03 -07:00
Tom Pittenger 1a066cadd2 Plane: fixed float->double print warning 2016-05-17 15:57:26 -07:00
Tom Pittenger 6746b4227a Plane: handle large negative baro offsets (corner case) to self-trigger a land-abort go-around
new param: LAND_ABORT_DEG
@Description: This parameter is used when using a rangefinder during landing for altitude correction from baro drift (RNGFND_LANDING=1) and the altitude correction indicates your altitude is higher than the intended slope path. Steeper slopes can result in crashes so this allows the option to remember the baro offset and self-abort the landing and come around for a another landing with the correct baro offset applied for a perfect slope. An auto-abort go-around will only happen once, next attempt will not auto-abort again. This operation happens entirely automatically in AUTO mode. This value is the delta degrees threshold to trigger the go-around. Example: if set to 5 deg and the mission planned slope is 15 deg then if the new slope is 21 then it will go-around. Set to 0 to disable. Requires LAND_SLOPE_RCALC > 0.
2016-05-17 15:41:09 -07:00
Tom Pittenger a1c4103cef Plane: print to GCS the newly calculated glide slope angle 2016-05-17 15:39:05 -07:00
Tom Pittenger f048aafb76 Plane: store auto land slope
- also changed order of landing slope calc but is functionally the same
2016-05-17 15:39:05 -07:00
Tom Pittenger 034cd2413e Plane: re-calc landing glide slope to gracefully handle baro offset during long flights
New param: LAND_SLOPE_RCALC
@Description: This parameter is used when using a rangefinder during landing for altitude correction from baro drift (RNGFND_LANDING=1) and the altitude correction indicates your altitude is lower than the intended slope path. This value is the threshold of the correction to re-calculate the landing approach slope. Set to zero to keep the original slope all the way down and any detected baro drift will be corrected by pitching/throttling up to snap back to resume the original slope path. Otherwise, when a rangefinder altitude correction exceeds this threshold it will trigger a slope re-calculate to give a shallower slope. This also smoothes out the approach when flying over objects such as trees. Recommend a value of 2m.

default value is 2 (so, enabled by default)
2016-05-17 15:39:04 -07:00
Tom Pittenger 4a6dd5a781 Plane: reset baro drift when setting home while disarmed 2016-05-17 15:32:42 -07:00
Andrew Tridgell e3b2e90a27 Plane: cleanup unnecessarily complex gcs[] usage 2016-05-17 08:27:39 +10:00
dgrat 48c243bed0 ArduPlane: Do not use is_zero() for non-float types 2016-05-16 19:08:35 -03:00
Tom Pittenger 7af888633d Plane: 3of3 add loiter_xtrack option flag for post-loiter navigation
0 to crosstrack from center of waypoint, 1 to crosstrack from tangent exit location
2016-05-16 11:50:54 -07:00
Tom Pittenger 78d6291e2c Plane: corrected land abort gcs msg 2016-05-13 17:22:13 -07:00
Tom Pittenger 6c0579a895 Plane: for better helical landings allow for instant approach stage if previous nav cmd was LOITER_TO_ALT 2016-05-13 17:22:07 -07:00
Tom Pittenger ba5b4e694c Plane: log NTUN:ArspdErr airspeed error (in meters) 2016-05-13 17:22:01 -07:00
Tom Pittenger 1551b9d881 Plane: remove redundant logging in NTUN 2016-05-13 17:22:00 -07:00
Tom Pittenger 8a58f5a5eb Plane: convert airspeed_error_cmd to airspeed_error (in meters) 2016-05-13 17:21:59 -07:00
Tom Pittenger 25dfb583d5 Plane: adjust target_airspeed with and without airspeed sensor (pitot) 2016-05-13 17:14:47 -07:00
Andrew Tridgell 2a0476483b Plane: make takeoff less noisy with zero timeout 2016-05-14 08:26:10 +10:00
Andrew Tridgell 574ba71ef3 Plane: update for AP_TECS API change 2016-05-14 08:26:10 +10:00
Ricardo de Almeida Gonzaga 1fad971851 ArduPlane: Fix typos 2016-05-13 19:20:07 -03:00
Michael du Breuil 7142bacfaa Plane: improve user friendliness of throttle fs msg 2016-05-11 09:00:55 -07:00
Andrew Tridgell 12e0012b16 Plane: allow for NAV_LOITER_UNLIM and NAV_LOITER_TIME in quadplane 2016-05-11 15:57:41 +10:00