Ebin
6dcab4e87b
Rover: support balance bot in AUTO mdoe
2018-07-28 08:44:18 +10:00
Ammarf
c0082271e6
Rover: implement Follow mode
2018-07-18 15:11:09 +09:00
Randy Mackay
b9d8f53af2
Rover: correct object avoidance parameter descriptions
2018-06-29 14:56:33 +09:00
Ebin
96d4335765
Rover: Crash check based on angle for all rover frames
2018-06-28 21:55:20 +09:00
Ebin
73e6ce18a0
Rover: Crash checks for Balance Bot
2018-06-28 21:55:20 +09:00
Ebin
6c2f18cc2f
Rover: manual mode support for balancebot
2018-06-28 21:55:20 +09:00
Ebin
936ebbe1f3
Rover: Added BalanceBot as a rover frame
2018-06-28 21:55:20 +09:00
Randy Mackay
03babfdc3c
Rover: fix RNGFND_TURN_ANGL param description again
2018-06-18 17:51:46 +09:00
Randy Mackay
9efa7ad635
Rover: fix RNGFND_TURN_ANGL range
2018-06-18 16:06:45 +09:00
Randy Mackay
c8f4227313
Rover: remove SPEED_TURN_GAIN
...
Loiter was the only mode using this, replaced with hardcoded gain. The desired speed in Loiter also uses a hardcoded gain so this should work
2018-06-08 09:19:25 +09:00
Peter Barker
36705af8ff
Rover: create an enumeration to hold vehicle mode constants
...
This gives us type-safety on the mode numbers. This is advantageous as
some of these symbols exist with different values elsewhere in the code.
2018-06-08 08:41:16 +09:00
Michael du Breuil
0ad2750f55
Rover: Remove software type param
2018-06-05 09:14:12 +10:00
Ammarf
b95ac72d35
Rover: add LOITER to ch7 options
2018-05-24 17:59:45 +09:00
Ammarf
2d64a47f90
Rover: add pivot_turn_rate to g2
2018-05-21 09:48:43 +09:00
Randy Mackay
40a8e0de09
Rover: default BRD_SAFETYOPTION to to allow disarming with safety switch
2018-05-09 08:02:21 +10:00
Andrew Tridgell
a575608110
Rover: fixed build warnings
2018-05-07 11:43:23 +10:00
Randy Mackay
c6638f66de
Rover: Loiter mode for boats
2018-05-06 16:58:00 +09:00
Peter Barker
0b1091231c
Rover: remove rcmap member from AP_AdvancedFailsafe
...
Also correct constructor for barometer
Also make it compile again
2018-05-05 18:06:31 +09:00
Randy Mackay
feb9cfc390
Rover: reduce TURN_MAX_G default to 0.6
2018-04-26 14:17:04 +09:00
Randy Mackay
87eef9051f
Rover: increase default pivot turn angle to 60deg
...
pivoting at only 30degrees of error could lead to endless twitching back and forth for poorly tuned rovers
2018-04-19 16:32:48 +09:00
Peter Barker
db7ce9aba2
Rover: use ahrs singleton for SmartRTL
2018-04-02 17:16:02 +01:00
nicknunno
8888adbfd4
Rover: TURN_MAX_G param desc update for range and increment
2018-04-02 09:13:25 +09:00
Randy Mackay
dcfe104163
Rover: reduce CRUISE_SPEED default to 2m/s
...
based on user logs most rovers max speed is less than 4m/s so this default is closer to the average
2018-03-09 13:19:21 +09:00
night-ghost
bab54ea647
Rover: allow AP_Stats to be optional
2018-03-02 07:23:35 +11:00
Randy Mackay
489c42bdff
Rover: add avoidance library
2018-01-22 17:18:41 +09:00
khancyr
5503a0069d
Rover: add proximity library
2018-01-22 17:18:41 +09:00
khancyr
c3fb985ec5
Rover: add fence support
2018-01-22 17:18:41 +09:00
Dylan Herman
f3b794f698
Rover: Add SmartRTL failsafe action
...
Add failsafe actions SmartRTL or RTL and SmartRTL or Hold
2018-01-19 09:26:45 +09:00
Randy Mackay
457c39bf1b
Rover: FS_ param values changed to camel case
...
Also minor comment change in crash-check failsafe
2017-12-23 13:53:34 +09:00
Randy Mackay
9710b16cac
Rover: THR dataflash logging replaces CTUN
2017-12-09 12:18:49 +09:00
Randy Mackay
df81f666df
Rover: fix LOG_BITMASK parameter description
2017-12-09 12:18:49 +09:00
Randy Mackay
aa38239629
Rover: add FRAME_CLASS to differentiate boats from rovers
2017-12-08 08:48:05 +09:00
Randy Mackay
57067fb8bc
Rover: add WP_SPEED and RTL_SPEED
...
This separates the default/maximum speed used in Auto, Guided, RTL and SmartRTL from the CRUISE_SPEED which is used as the base for the speed-to-throttle controller (along with CRUISE_THROTTLE)
2017-12-07 07:29:10 +09:00
Randy Mackay
0c6afac5c6
Rover: allow mode to be set from ch7 switch
2017-12-01 21:59:55 +09:00
Randy Mackay
b4a779aec3
Rover: add arm/disarm to ch7 switch
2017-12-01 21:59:55 +09:00
Peter Barker
e38cefea8a
Rover: add SmartRTL mode
...
called at 3hz from scheduler
2017-12-01 09:28:56 +09:00
Randy Mackay
04e9228fa0
Rover: add Acro mode
...
ACRO_TURN_RATE allows user control of maximum turn rate
2017-11-29 14:03:43 +09:00
Randy Mackay
26f50f6055
Rover: PILOT_STEER_TYPE replaces SKID_STEER_IN
...
new options allow controlling vehicle's heading while reversing
skid-steering vehicles rotate in opposite direction when backing up
2017-11-29 09:38:53 +09:00
Randy Mackay
cab972a429
Rover: reduce TURN_MAX_G default to 1.0
...
This is probably still slightly too high but closer than the previous 2.0
2017-11-27 12:25:28 +09:00
Randy Mackay
1600823b12
Rover: aux switch to learn cruise throttle and speed
2017-08-25 14:05:23 +09:00
Randy Mackay
14c74a5967
Rover: remove learning mode
...
saving waypoints can be done in manual or steering mode
2017-08-25 14:05:23 +09:00
Randy Mackay
524fe4cd82
Rover: aux switch saves waypoint in manual or steering modes
...
Also refactor aux switch methods
rename LEARN_CH to AUX_CH
2017-08-25 14:05:23 +09:00
Peter Barker
4fc31cf80d
Rover: add ArduSub to list of SYSID_SW_TYPE
2017-08-24 19:50:38 +09:00
Randy Mackay
6eceaef484
Rover: remove redundant SYS_NUM_RESETS
...
this is handled by AP_Stats library
2017-08-17 09:39:40 +09:00
Randy Mackay
e2d4182c75
Rover: fix parameter conversion
2017-08-17 09:39:40 +09:00
Randy Mackay
167a856cdb
Rover: remove THR_MIN, THR_MAX parameters from vehicle
...
enforcing these limits is now handled by AP_MotorsUGV class
2017-08-17 09:39:40 +09:00
Randy Mackay
0b917cfd36
Rover: mode auto guided and rtl slow before destination
...
new mode class member _desired_speed_final holds target speed at destination
main vehicle code passes heading to next waypoint into auto mode.
we do not provide heading when delaying at waypoint which signals we wish
auto-mode calculates final speed at destination which allows vehicle to
make turn within value of WP_OVERSHOOT parameter assuming vehicle turns at
maximum lateral acceleration.
2017-08-15 20:47:19 +09:00
Randy Mackay
d99108f3bc
Rover: use AR_AttitudeControl for throttle control
...
also direct throttle nudge replaced with speed nudge
calc_speed_max estimates vehicle's top speed based on cruise-speed and
cruise-throttle
steering mode now provides total target speed instead of using speed plug
throttle nudge
motor limits provided to attitude control to stop i-term buildup
uses negative desired speed instead of reversed flag
reporting to GCS uses new throttle controller
braking is simply enabled and allows a reverse motor output regardless of vehicle
speed
2017-08-15 20:47:19 +09:00
Randy Mackay
61d1ced7aa
Rover: add turn radius param for steering mode
...
removes reliance on old steerController
2017-08-15 20:47:19 +09:00
Randy Mackay
9097269d6d
Rover: use AR_AttitudeControl for steering control
2017-08-15 20:47:19 +09:00
Peter Barker
fa2b500e93
Rover: remove CLI
2017-08-14 10:23:50 +09:00
Randy Mackay
e79e92a789
Rover: remove unused SPEED_TURN_DIST parameter
2017-08-12 13:58:35 +09:00
Randy Mackay
66bb3e8ee0
Rover: minor formatting fix to parameters.cpp
2017-08-12 12:14:54 +09:00
Randy Mackay
96d55e0dbe
Rover: fix wheel encoder parameter names
...
extra underscore removed
2017-07-27 21:57:17 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
efa59d47f2
Rover: fix FS_THR_VALUE min range
2017-07-19 20:33:07 +09:00
Randy Mackay
285653da30
Rover: fix init order to clear compile warning
...
no functional change
2017-07-19 15:26:33 +09:00
Michael du Breuil
993df82cfa
APMRover: Fix bad parameter generation for AP_MotorUGV
2017-07-16 08:26:52 +10:00
khancyr
40b860e240
Rover: rename sonar to rangefinder
2017-07-14 17:40:05 +01:00
Randy Mackay
ebbbe0584a
Rover: integrate wheel encoder
2017-07-14 07:27:26 +09:00
Pierre Kancir
f70a2b36ea
Rover: integrate brushless motor support
2017-07-08 16:07:13 +09:00
Pierre Kancir
267a1532b9
Rover: integrate motors library
...
move throttle_slew_limit and THR_SLEWRATE parameter
move have_skid_steering to library
move mix_skid_steering to library's output_skid_steering method
move radio.cpp's output channel initialisation to motor's init method
use motors.get_throttle and get_steering instead of getting from Servo objects
use motors.set_throttle and set_steering instead of setting to Servo object
AP_Arming::arming_required is replaced with SAFE_DISARM parameter
2017-07-08 16:07:13 +09:00
Peter Barker
cfeb449979
Rover: create GCS subclass, use inheritted methods
2017-07-07 16:18:37 +01:00
Eugene Shamaev
b6c397c85a
APMrover2: move of CAN parameters into separate group
2017-07-03 11:44:32 +01:00
Pierre Kancir
c865972e9c
Rover: remove skid_steer_out parameter
2017-06-24 13:17:36 +09:00
Randy Mackay
0da6e73d76
Rover: add support for visual odometry
2017-06-14 09:12:20 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
981807fe9a
Rover: NFC SYS_NUM_RESETS is a read-only variable
2017-06-07 19:53:00 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
771d2fb13c
Rover: Be more explicit that a SPEED_TURN_GAIN value of 80% reduces "to 80%" and not "by 80%"
2017-06-06 11:34:52 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas
c389dd93d7
Rover: NFC - correct the units of the RNGFND_TURN_ANGL parameter
2017-05-30 12:09:50 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
a2472e6787
Rover: Use SI units conventions in parameter units
...
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
karthik.desai
47ff9ddeec
Rover: Added Beacon implementation
...
Enabled beacon parameters
beacon updates at 50hz
Use dataflash library to log AP_Beacon msg
2017-04-26 11:59:11 +09:00
Pierre Kancir
2eb0ed6242
APMRover2: Remove, correct some cast
2017-04-26 08:43:09 +10:00
Pierre Kancir
20cc336885
APMRover2: const correctness
2017-04-26 08:43:09 +10:00
Pierre Kancir
c41e695c98
APMRover2: correct some style
2017-04-26 08:43:09 +10:00
Pierre Kancir
b634fe548d
APMRover2: Use c++ cast
2017-04-26 08:43:09 +10:00
Pierre Kancir
d4bd61d859
APMRover2: unhide default NAVL1_PERIOD with a define
...
set the correct value to param
2017-04-15 13:48:40 +10:00
Grant Morphett
cfb11729a6
Rover: Setting crash detecting to off by default.
2017-03-15 17:24:35 +11:00
Randy Mackay
b8f24fba98
Rover: fix SYSID_ENFORCE parameter description
2017-02-28 15:07:59 +09:00
Andrew Tridgell
fe4baf2904
Rover: setup frame type parameter flags
2017-02-14 19:50:01 +11:00
Peter Barker
407e251e1d
Rover: rename gcs[] to gcs_chan[]
...
Wish to use gcs() to return the gcs singleton
2017-02-13 09:32:01 +11:00
Andrew Tridgell
36cf57c0fa
Rover: fixed parameter path
2017-02-06 15:12:32 +11:00
Pierre Kancir
99ba8bdc08
APMRover2: add advance failsafe
2017-01-31 17:12:37 +11:00
murata
0c813c5afa
Rover: Unify from print or println to printf.
2017-01-27 18:20:22 +11:00
Andrew Tridgell
9fe3eba2a0
Rover: added automatic parameter upgrade for SRV_Channel
2017-01-12 17:39:37 +11:00
Andrew Tridgell
93d6b012c2
Rover: convert to new SRV_Channel API
2017-01-12 17:39:37 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas
5bf45dbffd
APMrover2: publish SPEED2THR_ parameters
2017-01-07 10:32:11 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas
0054df9907
APMrover2: Correct AUTO_TRIGGER_PIN Values format
...
This allows simplified machine parsing of the generated XML file
2017-01-07 10:23:56 +11:00
Pierre Kancir
70d0997b73
Rover: Parameters.cpp correct whitespace, remove tabs
2016-12-30 09:20:24 +09:00
priseborough
2facebff80
Rover: Add EKF3 and remove EKF1
2016-12-19 08:07:10 +11:00
Pierre Kancir
dec954bb0c
Rover: added crash check
2016-12-07 12:46:02 +11:00
murata
bbf0cfb564
APMrover2: Change from printf statement to print, println statement.
2016-11-25 16:00:30 -08:00
Pierre Kancir
326e0f224f
Rover: added SYSID_ENFORCE parameter
2016-11-24 09:34:48 +11:00
Peter Barker
36c0bacada
Rover: support for AP_Stats (flight time, bootcount, runtime)
2016-10-29 14:53:25 +09:00
Peter Barker
cfee3b6c0e
Rover: add support for ParametersG2
2016-10-29 14:53:25 +09:00
Mathieu OTHACEHE
152edf7189
Global: remove mode line from headers
...
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Randy Mackay
d39190ff30
Rover: TELEM_DELAY parameter range to 30sec
...
No functional change
2016-08-29 15:28:47 +09:00
Pierre Kancir
1a3fc56682
APMrover2: fix typo in parameter
2016-08-28 14:26:06 +02:00
Peter Barker
44791268ac
Rover: use SPEED_CRUISE define from config.h
2016-08-18 11:20:16 +10:00
Andrew Tridgell
fd0f31dc44
Rover: added AP_Button support
2016-07-22 15:01:21 +10:00
Grant Morphett
35a132f74e
Rover: Added throttle PID logging
2016-05-31 08:44:52 +10:00
Andrew Tridgell
c0172516af
Rover: use DataFlash::log_while_disarmed()
2016-05-09 12:06:00 +10:00