Randy Mackay
|
5090e6f4fb
|
Copter: init G_Dt with MAIN_LOOP_SECONDS definition
|
2016-04-01 11:59:30 +09:00 |
Leonard Hall
|
a9cda8b384
|
Copter: add convert_pid_parameters to ease migration to new PID gains
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
479a789325
|
Copter: remove call to attitude_control.set_dt
This is now passed into the constructor
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
c352e1bedf
|
Copter: fix attitude control parameter declaration
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
1f20a5ef69
|
Copter: access angle and rate PIDs through attitude controller
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
bde498375c
|
Copter: remove attitude PIDs
These are now part of AC_AttitudeControl
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
7f2c1f830f
|
AC_AttControl_Heli: add rate PIDs
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
5edc16dfb4
|
AC_AttControl_Multi: add rate PIDs
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
75042e5e27
|
AC_AttControl: remove rate PIDs
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
17c9db08f3
|
AC_AttControl: add angle and rate PIDs
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
de537390c2
|
AC_HELI_PID: adjust parameter descriptions
ILMI range is now 0 to 1
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
3465f05bec
|
AC_HELI_PID: shorten FILT_HZ to FILT, I_L_MIN to ILMI
Also minor formatting fix
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
425caeabf7
|
AC_PI_2D: fix parameter description
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
227e4f86d7
|
AC_PID: fix parameter description
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
920425567c
|
AC_PID: shorten FILT_HZ to FILT
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
bc1b8f415a
|
AP_Motors: example sketch output limit flags
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
c9055ccdb1
|
AP_Motors: example sketch tests Single and Coax
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
41c55ffbe7
|
AP_MotorsTri: use YAW_SV_REV to reverse yaw output
|
2016-04-01 11:59:30 +09:00 |
Leonard Hall
|
13d727c2c6
|
AP_MotorsTri: add YAW_SV_ANGLE parameter to capture yaw servo lean angle max
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
c939cc1551
|
AP_MotorsTri: clarify YAW_SV parameter descriptions and comments
|
2016-04-01 11:59:30 +09:00 |
Leonard Hall
|
267513d864
|
AP_MotorsTri: fixes to output_armed_stabilizing
Also minor comment fixes
|
2016-04-01 11:59:30 +09:00 |
Leonard Hall
|
250a444e57
|
AP_MotorsCoax: fixes to stab patch
Fix throttle_lower flag
Also some formatting changes
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
20565580ed
|
AP_MotorsCoax: remove disabling of output ch7
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
63fefae7cf
|
AP_MotorsCoax: use calc_pwm_output_1ot1 instead of local calc_pivot_radio_output
|
2016-04-01 11:59:30 +09:00 |
Leonard Hall
|
840e60c930
|
AP_MotorsSingle: fixes to stab patch
Fixes throttle_lower flag
Also some formatting changes
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
af9b18329c
|
AP_MotorsSingle: use calc_pwm_output_1to1 instead of local calc_pivot_radio_output
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
ef5dbae707
|
Copter: remove setting of heli_servo_rsc pwm range
This object is not used
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
1f37f5a0e7
|
Copter: remove tradheli swash, yaw and rsc servos
These are all created within the AP_MotorsSingle class now except for servo_rsc which was unused
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
c4b88aafef
|
AP_MotorsHeli: swash and tail servo objects moved into class
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
08a485eec4
|
AutoTest: reduce heli rate P values
Also remove explicit params to use EKF2 because it is used by default now
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
12d9ffee12
|
AutoTest: remove H_RSC_MIN and MAX from heli params
These parameters are not used and having them causes errors during testing if we remove the corresponding parameters from the tradheli code
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
d2a42a7a0e
|
Copter: remove heli_radio_passthrough
Replaced with set_radio_passthrough which can be used for all frames
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
ce1fb7fb06
|
Copter: passthrough pilot input to motors to allow wiggling servos
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
4f1e62d551
|
AP_MotorsHeli: remove reset_radio_passthrough
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
b5593431bf
|
AP_MotorsHeli_Single: replace collective_mid_pwm with collective_mid_pct
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
9790245bf1
|
AP_MotorsHeli: replace collective_mid_pwm with collective_mid_pct
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
a39bbc5421
|
AP_MotorsHeli: servo_test in range -1 to 1
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
a42706bdcc
|
AP_Motors: remove unused example sketch to test timing
This test was only important on the slower AVR boards
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
a3450b712c
|
AP_Motors: fix example sketch
|
2016-04-01 11:59:30 +09:00 |
Leonard Hall
|
753b72b28c
|
AP_MotorsY6: call normalise_rpy_factors in motor setup
|
2016-04-01 11:59:30 +09:00 |
Leonard Hall
|
13ab3ecfea
|
AP_MotorsQuad: call normalise_rpy_factors in motor setup
|
2016-04-01 11:59:30 +09:00 |
Leonard Hall
|
7ac4fc5569
|
AP_MotorsOctaQuad: call normalise_rpy_factors in motor setup
|
2016-04-01 11:59:30 +09:00 |
Leonard Hall
|
e182c10625
|
AP_MotorsOcta: call noramlise_rpy_factors in motor setup
|
2016-04-01 11:59:30 +09:00 |
Leonard Hall
|
733b89cf3c
|
AP_MotorsHexa: call noramlise_rpy_factors in motor setup
|
2016-04-01 11:59:30 +09:00 |
Leonard Hall
|
8f8eb7e214
|
AP_MotorsMatrix: add normalise_rpy_factors
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
e7ba5ae451
|
AP_MotorsMulticopter: fix get_hover_throttle_as_high_end_pct
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
39f795d9fd
|
Plane: quadplane sets motors desired spool state
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
0abea7af68
|
Copter: remove slow_start from stabilizing
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
1c98cd9d52
|
Copter: remove slow_start from althold
|
2016-04-01 11:59:30 +09:00 |
Randy Mackay
|
f6c26ad285
|
Copter: remove slow start from acro
|
2016-04-01 11:59:30 +09:00 |