Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
15,841 Commits 71 Branches 509 Tags 717 MiB
Commit Graph

15841 Commits

Author SHA1 Message Date
Tom Pittenger 06d1f3ebdf Plane: add ArduPlane/test/* to gitignore 
so that the ArduPlane sitl example (--aircraft test) won't show flight
logs as changes
 2015-03-13 13:10:17 +11:00
Tom Pittenger 420e9e0d2e Plane: added INITIAL_MODE which is the mode we boot up into. 
This is useful when flying without a RX or if you have a RX that
outputs zeros without a detected Txmtr
 2015-03-13 13:04:23 +11:00
Andrew Tridgell 472a50f9c2 Build: removed APM2 build for copter 
no longer supported
 2015-03-13 11:36:54 +11:00
Andrew Tridgell a942ebbb70 Plane: removed unnecessary prototype 2015-03-13 11:21:47 +11:00
Andrew Tridgell dc9e2a54f3 Plane: fixed use of HAL soft_armed 2015-03-13 11:20:43 +11:00
Tom Pittenger 659904bf65 Plane: sped up is_flying filter since it is running at only 1Hz 2015-03-13 11:07:19 +11:00
Tom Pittenger 8f7bb61a54 Plane: changed arm check method to use new is_flying code 2015-03-13 11:07:05 +11:00
Tom Pittenger 58b0702793 Plane: isFlying redesign 
The is_flying() function is too simplistic to be used as a generic
status. Added a sticky heuristic method that depends on the arm
state. More thought should go into the boolean result of isFlying but
this is at least safer than the original method.
 2015-03-13 11:06:54 +11:00
Andrew Tridgell 0b261e8695 Travis: used sudo with pip 2015-03-13 10:54:59 +11:00
Andrew Tridgell de2c22b4b9 Travis: try to upgrade to g++ 4.8 2015-03-13 10:51:31 +11:00
Andrew Tridgell 8fee936ad7 HAL_SITL: fixed emulation of MTK1.6 GPS 2015-03-13 10:30:20 +11:00
Andrew Tridgell e0870d5038 AP_GPS: disable NMEA and SiRF on AVR 2560 
we are too low on flash space for plane on APM2 now
 2015-03-13 10:30:00 +11:00
Andrew Tridgell 5da80f44b1 AP_GPS: fixed MTK1.6 time handling 
my MTK1.6 does not use hectoseconds, it uses milliseconds
 2015-03-13 10:29:36 +11:00
Andrew Tridgell d9342ed854 Copter: allow motor test using raw pwm without RC cal 2015-03-12 17:49:39 +11:00
Andrew Tridgell 2e6d79f449 Travis: disable droneapi and upgrade pip 2015-03-12 17:28:04 +11:00
Andrew Tridgell 67e10ff392 Travis: ignore failure of extra deb install 2015-03-12 17:28:04 +11:00
Randy Mackay 94bd357c57 Tracker: add EKF_STATUS_REPORT to enum 
avoids a compiler warning
 2015-03-12 13:44:04 +09:00
Randy Mackay c5bbd445cc Rover: send EKF_STATUS_REPORT in extra3 stream 2015-03-12 13:44:01 +09:00
Randy Mackay cb1b4ab486 Plane: send EKF_STATUS_REPORT in extra3 stream 2015-03-12 13:43:58 +09:00
Randy Mackay 553261d4ce Copter: send EKF_STATUS_REPORT in extra3 stream 2015-03-12 12:20:03 +09:00
Randy Mackay 230ca583d1 NavEKF: support sending EKF_STATUS_REPORT 2015-03-12 12:20:00 +09:00
Randy Mackay 5ee67e63ec GCS_MAVLink: add EKF_STATUS_REPORT to enum 2015-03-12 12:19:58 +09:00
Randy Mackay 3c555fc396 GCS_MAVLink: version number after adding EKF_STATUS_REPORT 2015-03-12 12:19:56 +09:00
Randy Mackay 5aef7e6d1a GCS_MAVLink: generate after adding EKF_STATUS_REPORT 2015-03-12 12:19:54 +09:00
Randy Mackay d464344c34 GCS_MAVLink: add EKF_STATUS_REPORT message to xml 2015-03-12 12:19:50 +09:00
Andrew Tridgell 07fd31c724 AP_InertialSensor: change copter filters to 20Hz 
with the backend filters disabled 20Hz is closer to the old default of
30Hz
 2015-03-12 13:11:17 +11:00
Andrew Tridgell d44fff71cf autotest: disable ARMING_REQUIRE in autotest 2015-03-12 12:55:08 +11:00
Andrew Tridgell e0a0c3afcf AP_Arming: default to arming required 2015-03-12 12:53:27 +11:00
Andrew Tridgell a1d43e39e0 AP_InertialSensor: added get_gyro_filter_hz() and get_accel_filter_hz() 2015-03-12 12:50:31 +11:00
Andrew Tridgell 8b0337ffd0 Rover: removed set_default_filter() call 2015-03-12 12:50:31 +11:00
Andrew Tridgell 3d7d46b9b0 AP_InertialSensor: replaced INS_MPU6K_FILTER with INS_ACCEL_FILTER and INS_GYRO_FILTER 
this allows filtering to be set separately on accels and gyros where possible
 2015-03-12 12:50:31 +11:00
Andrew Tridgell f3314791f2 AP_InertialSensor: removed INS_CALSENSFRAME 
it is no longer needed as we have shifted the accel cal indexes
 2015-03-12 12:50:31 +11:00
Andrew Tridgell 4bc6c8e655 AP_InertialSensor: shift to new parameter indexes for accel calibration 
this allows for users to switch between development trees and previous
stable versions while retaining their accel calibration values.
 2015-03-12 12:50:30 +11:00
Andrew Tridgell 5d0eb49114 AP_InertialSensor: calculate queue depth based on requested sample rate 
this auto-scales the queue depth for plane, rover and copter
 2015-03-12 12:50:30 +11:00
Andrew Tridgell c42a40553a Travis: install some extra packages for AVR 2015-03-12 12:50:30 +11:00
Andrew Tridgell f3706d63c7 Filter: prevent copying the filter parms on apply 2015-03-12 12:50:30 +11:00
Andrew Tridgell 08d0ac37a3 autotest: need accel offsets for 2 IMUs now 2015-03-12 12:50:30 +11:00
Andrew Tridgell ea49d1cd39 AP_InertialSensor: removed unused variable 2015-03-12 12:50:30 +11:00
Andrew Tridgell b36122dec0 Filter: removed stdio.h 
breaks AVR build
 2015-03-12 12:50:30 +11:00
Andrew Tridgell e6a4b9f68c AP_InertialSensor: check accel health during accel cal 2015-03-12 12:50:29 +11:00
Andrew Tridgell 875339f12a AP_InertialSensor: try to avoid a compiler fault in travis 2015-03-12 12:50:29 +11:00
Andrew Tridgell 29bf3f569e Rover: removed 1D accel calibration 2015-03-12 12:50:29 +11:00
Andrew Tridgell bd4476cb84 AntennaTracker: removed 1D accel cal 2015-03-12 12:50:29 +11:00
Andrew Tridgell 5175f21225 Plane: removed 1D accel calibration 2015-03-12 12:50:29 +11:00
Andrew Tridgell 031c81beee AP_AHRS: removed call to 1D accel cal 2015-03-12 12:50:29 +11:00
Andrew Tridgell 4deb136bb0 AP_Arming: require 3D accel cal always 2015-03-12 12:50:28 +11:00
Andrew Tridgell 786172aa4e AP_InertialSensor: removed 1D accel calibration 
it is finally time to move on from this. We want to push people
towards better calibration and removing the 1D accel cal is the first
step
 2015-03-12 12:50:28 +11:00
Andrew Tridgell a975520033 AP_InertialSensor: check range of accels in 3D calibration 
during 3D accel cal it is possible to get data which passes the sphere
fit but which has very poor coverage and does not provide sufficient
data for a good result. This checks that each axis covers a range of
at least 12 m/s/s in body frame
 2015-03-12 12:50:28 +11:00
Andrew Tridgell a8a8628515 AP_InertialSensor: added INS_CALSENSFRAME parameter 
this allows us to detect if accel calibration was done in sensor frame
or not. If it was done in sensor frame then the accel calibration is
independent of AHRS_ORIENTATION, which makes it easier to move a board
to a new airframe without having to recalibrate.
 2015-03-12 12:50:28 +11:00
Jonathan Challinger bc655ff0cc AP_InertialSensor_PX4: add optional debug 2015-03-12 12:50:28 +11:00