Commit Graph

15841 Commits

Author SHA1 Message Date
Arthur Benemann 4bdae02cfd AP_Gimbal: disable gimbal motors if copter is fliped 2015-04-21 21:45:34 +09:00
Arthur Benemann ebaf1e28b1 AP_Gimbal: smooth the RC input with a low pass filter 2015-04-21 21:45:33 +09:00
Arthur Benemann 534790634b AP_Gimbal: add a radio failsafe state to the gimbal 2015-04-21 21:45:32 +09:00
Arthur Benemann 7cf883a61c Copter: increase the telemetry receive function rate to 400Hz
gimbal loop runs at 100Hz so to respond in time the gcs_check_input must run at a faster rate, the process are asyncronus
2015-04-21 21:45:31 +09:00
Arthur Benemann 1da4be3a87 AP_Gimbal: initial implementation of the rate controlled gimbal library 2015-04-21 21:45:30 +09:00
Arthur Benemann 1d9beed42f AP_SmallEKF: add function to report if the EKF is stable 2015-04-21 21:45:29 +09:00
Arthur Benemann 7b28bf7d44 AP_NavEKF: Remove small EKF dependency on navigation EKF 2015-04-21 21:45:28 +09:00
Arthur Benemann 558a69bdca Mount_MAVLink: remove code now in AP_Gimbal 2015-04-21 21:44:56 +09:00
Jonathan Challinger 2053d5e42e GCS_MAVlink: add GIMBAL_ and GOPRO_ messages 2015-04-21 21:40:05 +09:00
Randy Mackay 87e6452ee9 Mission: bug fix when jump target is zero
This would result in copter flying to a waypoint high above home
2015-04-21 20:42:49 +09:00
Andrew Tridgell a0969905ce AP_AHRS: make get_error_rp() and get_error_yaw() const
this makes them usable by multiple consumers, and allows use by EKF
2015-04-21 21:42:17 +10:00
Andrew Tridgell 3300de2c9d autotest: added some gyro and accel noise to copter sim
this noise should be kinematically consistent, so will be better for
the EKF
2015-04-21 21:33:27 +10:00
Andrew Tridgell 79f6d93dc9 autotest: change SIM_GPS_DELAY in parameters to 1
better matches uBlox
2015-04-21 21:05:07 +10:00
Andrew Tridgell 2dfe3cb844 DataFlash: added a perf counter for microSD overruns
this allows us to tell if a microSD can handle a high logging rate
2015-04-21 20:45:30 +10:00
Andrew Tridgell 03b5305837 autotest: allow for negative col pitch in crrcsim heli
this allows for hovering upside down in acro mode
2015-04-21 20:45:30 +10:00
Andy Piper b0937154f5 DataFlash: log compass health
This patch simply logs the health of each compass for easy diagnosis.
2015-04-21 13:18:24 +09:00
Randy Mackay cebd578403 Frame Params: remove unused Advanced, Beginner 2015-04-21 10:44:26 +09:00
Andrew Tridgell c153d31dd2 DataFlash: speed up DataFlash in Replay 2015-04-21 10:14:41 +10:00
Andrew Tridgell dcb25632fb AP_Compass: removed old setHIL compass offset 2015-04-21 08:30:05 +10:00
Andrew Tridgell a4bad1c703 HAL_SITL: use SIM_MAG_OFS in SITL compass 2015-04-21 08:29:51 +10:00
Andrew Tridgell 1ce9cb693a SITL: added SIM_MAG_OFS for setting compass offsets in SITL 2015-04-21 08:29:27 +10:00
Andrew Tridgell 5f8c05b712 autotest: fixed extraction of defaults 2015-04-20 15:12:51 +10:00
Andrew Tridgell 8f09ee077c Replay: try to cope better with millisecond timestamps in 400Hz copter logs 2015-04-20 15:12:51 +10:00
Andrew Tridgell 179e47c618 HAL_Linux: prevent time from going backwards in Replay 2015-04-20 15:12:51 +10:00
Andrew Tridgell d7000c4105 AP_Compass: fixed compass timestamps in Replay 2015-04-20 15:12:51 +10:00
Randy Mackay dc3fdf76a3 Rover: remove call to empty camera.configure_msg 2015-04-20 13:50:23 +09:00
Jaime Machuca 7330b5e91b Rover: add call to send digicam configure messages from a mission item
Also add log_picture to separate the triggering of a picture
from the dataflash logging and feedback message to the GCS
2015-04-20 13:50:21 +09:00
Jaime Machuca 5de15464b6 Copter: add call to send digicam configure messages from a mission item
Also add log_picture to separate logging and feedback from
the do_take_picture function so that it can be used when pictures
are triggered from a mission command
2015-04-20 13:50:19 +09:00
Jaime Machuca ab1cf2261d Plane: add call to send digicam configure messages from a mission item
Also add log_picture to separate the taking of a picture
from the dataflash logging and feedback to GCS
2015-04-20 13:50:17 +09:00
Randy Mackay 337a94e52e Camera: remove empty configure_msg method 2015-04-20 13:50:15 +09:00
Randy Mackay d456b97fd2 Camera: control_cmd triggers pic 2015-04-20 13:50:12 +09:00
Jaime Machuca 38491c4ff7 Camera: fix mission cmds sending msgs to components
mission commands were triggering the sending of
mavlink mission items when they should have been sending
command long messages
2015-04-20 13:50:10 +09:00
Randy Mackay 4eb3263653 Camera: mission cmds send do-digicam msgs to components
This allows digicam-control and digicam-configure mission
command to trigger sending the equivalent mavlink messages
to components
2015-04-20 13:50:08 +09:00
Randy Mackay 8dcd555037 Camera: trigger_pic sends do-digicam-control to components
This (optionally) allows pictures triggered from ch7/ch8
switch to send a mavlink do-digicam-control message to
components
2015-04-20 13:50:06 +09:00
Randy Mackay 1f705eb6a3 GCS_MAVLink: add send_to_components method 2015-04-20 13:50:04 +09:00
Randy Mackay 888c2289ce Mission: support do-digicam-control parameters 2015-04-20 13:50:01 +09:00
Randy Mackay a27f383612 Copter: remove duplicate IMU/ATT logging
Previously IMU and ATT data could be logged at both a high rate
and a low rate.  This patch makes it skip the low rate logging
if the high rate is enabled
2015-04-20 13:49:09 +09:00
Randy Mackay 06b3935beb Copter: LOG_BITMASK parameter def get All+FastIMU, All+FastATT 2015-04-20 13:49:06 +09:00
Randy Mackay dfb720bab6 Copter: rename FULL_IMU logging to IMU_FAST
This naming is consistent with the earlier ATTITUDE_FAST option and
clarifies that it's the rate that's increased rather than the content.
2015-04-20 13:49:04 +09:00
Randy Mackay 2dbff9c544 Copter: remove scheduler table for 100hz CPUs
We only support high performance CPUs capable of 400hz
2015-04-20 13:49:01 +09:00
Peter Barker 5a45de5e00 Copter: IMU full-rate logging LOG_BITMASK flag 2015-04-20 13:48:58 +09:00
Randy Mackay 803be1c255 Revert ".gitattributes: automatically clean up newlines in source files"
This reverts commit d66eec536f.
2015-04-20 11:04:59 +09:00
Andrew Tridgell 664c92fb81 Plane: fixed RUDDER_ONLY to not combine direct rudder output
this prevents us over-rolling in FBWA
2015-04-20 09:09:23 +10:00
Andrew Tridgell 76a81069c2 autotest: removed unused Rascal XML config 2015-04-20 09:09:23 +10:00
Andrew Tridgell edec706c12 Plane: added RUDDER_ONLY parameter
this gives much easier setup for rudder only aircraft.
2015-04-20 09:09:23 +10:00
Andrew Tridgell 4fe39c67b4 Build: use git checkout -f
this is an attempt to avoid CRLF attributes breakage with builds
2015-04-20 08:59:50 +10:00
Andrew Tridgell ffd4662ec4 autotest: convert rover sim to use sim_wrapper.py 2015-04-20 08:36:52 +10:00
Andrew Tridgell dbeaccc3d9 autotest: auto-adjust frame rate for crrcsim 2015-04-20 08:20:50 +10:00
Andrew Tridgell 6897bfdc6b autotest: fixes for crrcsim with heli model 2015-04-20 08:05:29 +10:00
Andrew Tridgell e9b6863b23 autotest: changed to new crrcsim FDM protocol format 2015-04-19 15:49:05 +10:00