Andrew Tridgell
9126579b77
AP_IOMCU: added memory to debug code
2021-02-24 18:21:08 +11:00
Andrew Tridgell
87528f47c8
AP_IOMCU: prevent internal error on bootloader flash
...
when we flash the bootloader on boards with an IOMCU we expect a long
delay as the CPU stops during the flash
2021-01-27 09:49:35 +11:00
Jaaaky
4ec1c2ea67
AP_IOMCU: Remove duplicate includes from AP_IOMCU.cpp
2020-12-15 10:01:54 +11:00
Andrew Tridgell
1b5551206a
AP_IOMCU: fixed bug in SBUS output when scanning for FPort input
...
when we are looking for FPort input, we normally switch UART3 on the
IOMCU to 115200 to look for inverted inputs at 115200 baudrate. We
need to disable this switching when we have SBUS output enabled to
prevent a change in the SBUS output baudrate
Many thanks to afishman for finding this bug
Fixes #15522
2020-10-07 16:44:13 +11:00
Andrew Tridgell
fdff355a8a
AP_IOMCU: fixed handling of RC ignore failsafe option
...
this allows for ignoring SBUS failsafe on boards using an IOMCU
2020-08-25 09:53:26 +10:00
Andrew Tridgell
017f005737
AP_IOMCU: pass supported RC protocols to IOMCU
2020-08-24 16:32:35 +10:00
Peter Barker
f1182637a6
AP_IOMCU: use new UARTDriver discard_input method
2020-05-26 09:20:32 +10:00
Andrew Tridgell
fd32dff45a
AP_IOMCU: force safety off on IOMCU reset
...
if safety was forced off previously and we get an IOMCU reset then
force it off when the reset happens so vehicle can keep flying
2020-05-14 18:28:50 +10:00
Peter Barker
f0b38fa11c
AP_IOMCU: create and use INTERNAL_ERROR macro so we get line numbers
2020-04-30 13:21:36 +10:00
Peter Barker
e5b634cdd0
AP_IOMCU: add IOMC log message documentation
2020-04-12 08:36:48 +10:00
Andrew Tridgell
258b8b71ea
AP_IOMCU: use more efficient read API for rcin
2020-01-31 11:09:07 +11:00
Andrew Tridgell
ba779c65ad
AP_IOMCU: added a health check based on status read errors
...
if we have more than 1 in 128 read status requests failing then mark
IOMCU unhealthy
2020-01-18 07:13:11 +11:00
Andrew Tridgell
2d02062bfc
AP_IOMCU: reduce uart buffer sizes
2020-01-18 07:13:11 +11:00
Andrew Tridgell
63c199a600
AP_IOMCU: support RSSI from receiver
2020-01-02 09:52:57 +11:00
Andrew Tridgell
6599fd49a2
AP_IOMCU: don't use pulse input for FPORT
2020-01-02 09:52:57 +11:00
Stephen Dade
52f2ec34fa
AP_IOMCU: Ensure IOMCU does not log if there is no logger
2019-11-20 11:46:34 +11:00
Mark Whitehorn
5276cb7f2b
AP_IOMCU: rename sensor_config_error to config_error
2019-11-08 10:14:34 +11:00
Andrew Tridgell
a11f2b5cfb
AP_IOCMU: added singleton in AP namespace
2019-11-02 16:31:04 +11:00
Andrew Tridgell
34f5b40919
AP_IOMCU: use crc32_small() in AP_IOMCU
...
the slower speed is not noticible and this saves 1k ram
2019-10-28 15:53:16 +11:00
Andrew Tridgell
ef1aaa6db0
AP_IOMCU: fixes for modified AP_ROMFS API
...
need to use AP_ROMFS::free()
2019-10-24 22:03:43 +11:00
Mirko Denecke
12c9e50aef
AP_IOMCU: remove unnecessary tabs and whitespaces
2019-10-21 07:57:44 +11:00
Mark Whitehorn
0a6ae60c89
AP_IOMCU: fix IO fast channel mask
2019-10-01 07:13:33 +10:00
Andrew Tridgell
7c3df18ea3
AP_IOMCU: change optimisation from -O3 to -O2
2019-09-28 08:57:26 +10:00
Andrew Tridgell
672d09c965
AP_IOMCU: use AP::RC() for AP_RCProtocol
2019-09-06 08:51:45 +10:00
Andrew Tridgell
8ef2046f7b
AP_IOMCU: use blocking writes to uart
...
this avoids the issue of arming failing due to a non-zero protocol count
2019-08-17 17:36:41 +10:00
Andrew Tridgell
454717cf6f
AP_IOMCU: cleanup IO protocol and add logging
...
this cleans up the IOMCU protocol structures now we don't need to be
compatible with the old nuttx based protocol and adds logging of IOMCU
errors
2019-08-17 17:36:41 +10:00
Andrew Tridgell
984542fa53
AP_IOMCU: fixed error handling for short packets
...
this prevents short packets from the IOMCU being processed. A short
enough read could be processed as a valid status packet, which would
lead to invalid values for safety flag and servo voltage
fixes issue #12030
2019-08-17 17:36:41 +10:00
bugobliterator
c07fe55b87
AP_IOMCU: remove autodetection of heater pin polarity, instead hardcode it
2019-07-25 17:05:41 +10:00
Andrew Tridgell
76a8d494c3
AP_IOMCU: dither heater pin to prevent 1Hz impact on mags
...
with the simpler duty cycle code we see a 1Hz 25 mGauss cycle in the
internal mags
2019-07-12 12:46:27 +10:00
Siddharth Purohit
f23746053d
AP_IOMCU_FW: autodetect active high/low on heater control pin
2019-06-08 14:31:01 +10:00
Andrew Tridgell
ef5f83d0b5
AP_IOMCU: remove 2s delay on boot and skip crc check on watchdog
...
thanks to @Jaaaky for the suggestion in #11232
2019-05-03 13:44:56 +10:00
Andrew Tridgell
6c50feaead
AP_IOMCU: improved handling of IOMCU reset
...
use IOMCU timestamp to detect reset
2019-04-28 07:45:33 +10:00
Andrew Tridgell
d4c68da76e
AP_IOMCU: added IOMCU time since boot to protocol
...
and optional watchdog testing using safety switch
(compile time option)
2019-04-28 07:45:33 +10:00
Andrew Tridgell
af54e8620e
AP_IOMCU: prevent startup sync causing an internal error
2019-04-28 07:45:33 +10:00
Andrew Tridgell
c7be7d7343
AP_IOMCU: cope with IOMCU reset
2019-04-22 16:53:35 +10:00
Andrew Tridgell
6181c66e5c
AP_IOMCU: handle watchdog reset in IO firmware
2019-04-22 16:53:35 +10:00
Andrew Tridgell
480d33706c
AP_IOMCU: fixed safety state on reboot
...
fixes issue #11031
2019-04-20 14:48:59 +10:00
Pierre Kancir
eab7d08021
AP_IOMCU: fix includes
2019-03-26 10:27:54 +11:00
Andrew Tridgell
664e92ed7e
AP_IOMCU: fixed build warnings
2019-02-26 16:18:26 +11:00
Andrew Tridgell
a6e989e263
AP_IOMCU: fixed shadowed variable warning
2019-02-26 16:18:26 +11:00
Tom Pittenger
28323147ab
AP_IOMCU: unify singleton naming to _singleton and get_singleton()
2019-02-10 19:09:58 -07:00
Michael du Breuil
85f3280705
AP_IOMCU: Remove unneeded AP_Buffer include
2018-12-31 11:41:43 +09:00
Andrew Tridgell
41264568ba
AP_IOMCU: added brushed motor feature bit in protocol
2018-11-30 13:14:14 +11:00
Andrew Tridgell
69c4fb671e
AP_IOMCU: optimisations to reduce ISR latency
...
this speeds up the DMA ISR handlers to reduce the change of losing a
byte on RC input due to loss of an interrupt
2018-11-27 09:38:18 +11:00
Andrew Tridgell
8e7695e5f0
AP_IOMCU: respond to override change more quickly
2018-11-07 07:35:45 +11:00
Andrew Tridgell
5771e0a90e
AP_IOMCU: added access to RC protocol name
2018-11-07 07:35:45 +11:00
Andrew Tridgell
3d90ddc453
AP_IOMCU: fixed stop bits in sbus output
2018-11-07 07:35:45 +11:00
Andrew Tridgell
a7c5ac8902
AP_IOMCU: run main loop at max rate
...
removed delay in main loop to reduce latency of RC input. This works
as we only have one thread
2018-11-07 07:35:45 +11:00
Andrew Tridgell
2159198c3e
AP_IOMCU: allow DSM input as pulses in iomcu
...
useful for receivers where DSM uses a normal servo plug
2018-11-07 07:35:45 +11:00
Andrew Tridgell
e6cadfa2d9
AP_IOMCU: disable DSM and SBUS for pulse input
2018-11-07 07:35:45 +11:00
Andrew Tridgell
49d07ed234
AP_IOMCU: catch parity errors on SBUS input
2018-11-07 07:35:45 +11:00
Andrew Tridgell
c148813c17
AP_IOMCU: enable uart for SBUS input
2018-11-07 07:35:45 +11:00
Andrew Tridgell
fab181345c
AP_IOMCU: fixed override on RC loss
...
use mid-stick positions
2018-11-07 07:35:45 +11:00
Andrew Tridgell
29fb674f3f
AP_IOMCU: use macros for LED outputs in iofirmware
2018-11-07 07:35:45 +11:00
Andrew Tridgell
a8d91a24b6
AP_IOMCU: fixed compat with nuttx firmwares
...
this allows older firmwares to change the IO firmware back to a nuttx
based firmware
2018-11-07 07:35:45 +11:00
Andrew Tridgell
107ccb3eef
AP_IOMCU: enable DSM input in iofirmware
2018-11-07 07:35:45 +11:00
Andrew Tridgell
b9e4916c17
AP_IOMCU: fixed delay in DSM bind
2018-11-07 07:35:45 +11:00
Andrew Tridgell
2488d25284
AP_IOMCU: fixed rate of failsafe handling
2018-11-07 07:35:45 +11:00
Andrew Tridgell
f8dc17f8ff
AP_IOMCU: implement DSM bind
2018-11-07 07:35:45 +11:00
Andrew Tridgell
184c05bc70
AP_IOMCU: fixed DSM bind
2018-11-07 07:35:45 +11:00
Andrew Tridgell
c57fe83217
AP_IOMCU: rename sbus_out.cpp to rc.cpp
...
will also handle DSM input on USART1
2018-11-07 07:35:45 +11:00
Eugene Shamaev
4d64b86f87
AP_IOMCU: Add binding procedure for DSMx
2018-11-07 07:35:45 +11:00
Andrew Tridgell
843772a2bc
AP_IOMCU: added some debug code
...
and lower PKT_MAX_REGS to reduce max DMA size. This fixes an
occasional fault
2018-11-07 07:35:45 +11:00
Andrew Tridgell
8ece4e3f64
AP_IOMCU: implement BRD_SAFETY_MASK in iofirmware
2018-11-07 07:35:45 +11:00
Andrew Tridgell
beff16abe6
AP_IOMCU: implement manual_rc_mask
2018-11-07 07:35:45 +11:00
Andrew Tridgell
27f06ce810
AP_IOMCU: trigger override at 1750
...
thanks Michael
2018-11-07 07:35:45 +11:00
Andrew Tridgell
46fcfe0582
AP_IOMCU: removed rc_channel range check
...
feedback from @WickedShell
2018-11-07 07:35:45 +11:00
Andrew Tridgell
e70a98fa9a
AP_IOMCU: support elevon and vtail mixing in failsafe
2018-11-07 07:35:45 +11:00
Andrew Tridgell
285508d568
AP_IOMCU: added initial mixing support
...
supports aileron, elevator, throttle and rudder
2018-11-07 07:35:45 +11:00
Andrew Tridgell
ec73a7072b
AP_IOMCU: use more bandwidth efficient IO read
2018-11-07 07:35:45 +11:00
Andrew Tridgell
191f72d2e6
AP_IOMCU: added mixing structure to protocol
2018-11-07 07:35:45 +11:00
Andrew Tridgell
cab5199da8
AP_IOMCU: fixed a race in event trigger on startup
...
this fixes the issue with initial safety option state, and with
initial safety mask
2018-11-05 19:24:44 +11:00
Andrew Tridgell
1711b93602
AP_IOMCU: fixed read packet count
2018-10-30 13:00:48 +11:00
Andrew Tridgell
ed48c24600
AP_IOMCU: added shutdown method
...
this cleans up the reboot process
2018-10-30 13:00:48 +11:00
Andrew Tridgell
f600ebd758
AP_IOMCU: added SBUS output support
2018-10-30 13:00:48 +11:00
Andrew Tridgell
af4340d1d1
HAL_ChibiOS: enable analog input on IOMCU
2018-10-30 13:00:48 +11:00
Andrew Tridgell
b45b8ff703
AP_IOMCU: added analog input to iofirmware
2018-10-30 13:00:48 +11:00
Andrew Tridgell
6ec87528db
AP_IOMCU: fixed RCIN failsafe
2018-10-17 15:11:28 +11:00
Andrew Tridgell
92d8ef0e76
AP_IOMCU: run the rcin timer tick in main loop
...
we no longer run a separate RCIN thread
2018-10-17 15:11:28 +11:00
Andrew Tridgell
3641dcee44
AP_IOMCU: only build iofirmware for ChibiOS
2018-09-19 12:14:15 +10:00
Andrew Tridgell
17112c8988
waf: allow build with "./waf iofirmware"
2018-09-19 12:14:15 +10:00
Andrew Tridgell
848dd87d58
AP_IOMCU: fixed code style issues
2018-09-19 12:14:15 +10:00
Andrew Tridgell
ba87856deb
AP_IOMCU: fixed build warning
2018-09-19 12:14:15 +10:00
Siddharth Purohit
605e0de03c
AP_IOMCU: conform to new time conversion API
2018-09-19 12:14:15 +10:00
Siddharth Purohit
bc601c1ff6
AP_IOMCU: add Boardconfig to list of required libraries
2018-09-19 12:14:15 +10:00
Andrew Tridgell
f0b27c9b92
AP_IOMCU: support brushed output
2018-09-19 12:14:15 +10:00
Andrew Tridgell
cfb10fbb2f
AP_IOMCU: fixed oneshot support in IO firmware
2018-09-19 12:14:15 +10:00
Andrew Tridgell
2c7e27374f
AP_IOMCU: use ioevents for oneshot in iofirmware
2018-09-19 12:14:15 +10:00
Andrew Tridgell
ecfe06b9e4
AP_IOMCU: implement safety LED and switch in iofirmware
2018-09-19 12:14:15 +10:00
Andrew Tridgell
037a455784
AP_IOMCU: moved protocol structures to a common header
2018-09-19 12:14:15 +10:00
Andrew Tridgell
89bfd7e850
AP_IOMCU: added blue LED support on PH1
2018-09-19 12:14:15 +10:00
Siddharth Purohit
19c002baaf
AP_IOMCU: add support for iofirmware update
2018-09-19 12:14:15 +10:00
Siddharth Purohit
fe3dda74bd
AP_IOMCU: remove optimize override from iofirmware
2018-09-19 12:14:15 +10:00
Siddharth Purohit
4608e90913
IOMCU: add application for ioboard firmware
2018-09-19 12:14:15 +10:00
Andrew Tridgell
f22d5f0d40
AP_IOMCU: implement failsafe PWM
2018-09-13 08:15:02 +10:00
Andrew Tridgell
135e37e1f4
AP_IOMCU: cope with IOMCU reset in flight
...
this copes with IOMCU reset when we have safety forced off
2018-09-04 15:24:12 +10:00
Lucas De Marchi
668c941717
Global: use new version of ARRAY_SIZE
2018-08-04 15:31:55 +10:00
Siddharth Purohit
9f5dbb74e7
AP_IOMCU: move to using updated time conv API
2018-08-03 13:44:59 +10:00
Andrew Tridgell
8c9f2bc79e
AP_IOMCU: fixed setting of rate masks
...
this affects layouts which set a subset of channels on a timer
2018-07-28 15:25:57 +10:00
Jonathan Challinger
65b20bfd83
AP_IOMCU: fix radio failsafe handling
2018-07-19 06:52:09 +10:00