Andrew Tridgell
258f472028
HAL_ChibiOS: detect stuck I2C bus and clear with SCL
...
This detects the I2C bus becoming stuck with SDA low after a timeout
and clears the bus by toggling SCL. Many thanks to @jhw84 for the
suggestion
2018-12-14 15:49:11 +11:00
Andrew Tridgell
3ffee081a4
HAL_ChibiOS: added palReadLineMode() function
...
used to change and restore line modes
2018-12-14 15:49:08 +11:00
Andrew Tridgell
22ed074030
AP_OSD: fixed fonts for new font system
2018-11-29 15:35:50 +11:00
Andrew Tridgell
5e162cb0e1
HAL_ChibiOS: use ChibiOS IO firmware for Pixhawk4
2018-11-28 09:12:19 +11:00
Andrew Tridgell
352a7667a7
HAL_ChibiOS: allow ROMFS to override a file
...
this allows a hwdef.dat with an include to change an embedded file
specified in the include
2018-11-28 09:10:10 +11:00
Matt
d3edb53fcd
AP_BattMonitor: Increase solo's power off button delay time
...
The Solo battery's power button needs to be held to power off. The
debounce time before it plays the power off tone is too low.
Occasionally it causes the user to not hold the button long enough.
This corrects the delay before playing the power off tone.
2018-11-24 11:13:25 +09:00
Randy Mackay
af220a2118
AP_RangeFinder: benewake tfmini always provide cm distances
...
a misunderstanding of the datasheet led to the mistaken idea that while in short-range-mode the distances were returned in millimeters
2018-11-22 08:58:14 +09:00
Randy Mackay
ed3ed7270c
RangeFinder: benewake buffer uses uint8_t
2018-11-19 11:46:28 +09:00
Andrew Tridgell
dbae45e868
AP_RCProtocol: fixed DSM parser for 8 channels
...
this ensures we remember channels from the previous frame, avoiding a
bug with more than 7 channels
2018-11-19 11:37:40 +09:00
Andrew Tridgell
4f82f574e9
AP_RPM: set pin to input before attaching interrupt
...
this fixes input on AUX6 on CubeBlack
2018-11-15 12:38:22 +11:00
Randy Mackay
4de971b879
AP_RangeFinder: fix benewake checksum check
2018-11-15 09:49:18 +09:00
Randy Mackay
8fdb67d955
DataFlash: log rangefinder status in RFND msg
2018-11-15 09:49:14 +09:00
Randy Mackay
54494a71e6
AP_RangeFinder: benewake returns at least 12m or 22m when out-of-range
...
value logged and shown to the user will be at least 12m for TFmini or 22m for TF02 which ensure the user won't see the range drop even if they have configured a very short useable distance
2018-11-15 09:49:11 +09:00
Randy Mackay
bb61b7e5e9
AP_RangeFinder: benewake logic reordering
...
this should be a non-functional change
2018-11-15 09:47:57 +09:00
Randy Mackay
54717c4f53
AP_RangeFinder: benewake lidar returns max range + 1m when out-of-range
...
also returns out-of-range when signal is weak
2018-11-15 09:47:30 +09:00
Randy Mackay
b579a36d8d
AP_RangeFinder: Benewake driver discards distances over 327m
2018-11-06 12:32:11 +09:00
Peter Barker
46b035419e
DataFlash: add sanity checks around EraseAll
2018-11-06 12:31:02 +09:00
Peter Barker
85b46ea103
GCS_MAVLink: allow vehicles to override VFR_HUD.alt
2018-11-06 12:19:28 +09:00
Andrew Tridgell
0717dddc46
HAL_ChibiOS: bring copter stable up to date with hwdef.dat
...
this fixes GPIO numbering, fixes terrain on some boards and adds some
new boards
2018-11-05 19:36:40 +11:00
Andrew Tridgell
d8fd590a3f
AP_IOMCU: fixed a race in event trigger on startup
...
this fixes the issue with initial safety option state, and with
initial safety mask
2018-11-05 17:26:28 +09:00
Andrew Tridgell
b55df3a8ee
HAL_ChibiOS: ensure RC in channels are bounded
2018-11-05 17:24:19 +09:00
Andrew Tridgell
e4a4828203
HAL_ChibiOS: fixed LED mapping for fmuv4
2018-10-29 14:07:30 +11:00
Nghia Nguyen
f0a7df7cf9
AP_Rangefinder: Add support for Garmin LidarLite-V3HP
2018-10-27 11:18:00 +01:00
Randy Mackay
4eee1fc06a
AC_Fence: get_polygon_points does not include return point
2018-10-26 15:21:24 +09:00
Randy Mackay
5082d43b0c
AC_Avoid: constify a few local variables
2018-10-26 15:21:22 +09:00
Randy Mackay
55dff47d75
AC_Avoid: stop includes margin for intersection calc
...
the simpler stop feature (as opposed to slide) was not including the margin when looking for intersections with the boundary meaning it could slow too late
2018-10-26 15:21:18 +09:00
Randy Mackay
0e0472054a
AP_Proximity: increase MAV driver timeout to 500ms
...
this comes after testing with ROS/mavros and discovering the update rate is only 4hz
2018-10-26 15:21:14 +09:00
Randy Mackay
d9ed07919c
AP_RangeFinder: check I2C dev during detect
2018-10-26 15:20:54 +09:00
JIMWAR
bd353db8ab
AC_Avoid: fix adjust_velocity_polygon
...
adjust_velocity_polygon function ignoring boundary[0]
2018-10-26 15:19:57 +09:00
Andrew Tridgell
f4c4f061b8
AP_Notify: fixed PixracerLED on NuttX
...
led_dim must be a positive number, and is not related to the led off
value
2018-10-26 15:18:53 +09:00
Andrew Tridgell
114318a9e3
AP_HAL: fixed PX4 LED polarity
2018-10-26 15:18:53 +09:00
Andrew Tridgell
6df32d6851
AP_Notify: init gpio state for LEDs
2018-10-26 15:18:53 +09:00
Andrew Tridgell
694543e8b2
AP_Notify: fixed px4-v4 to use pixracer LED driver
2018-10-26 15:18:53 +09:00
Randy Mackay
6e8e3cdbb2
AP_HAL_ChibiOS: update kakutef7 hwdef
...
This makes the kakutef7 the same as master commit bb99165
2018-10-26 16:16:36 +10:00
Randy Mackay
e8e82e99d3
AP_HAL_ChibiOS: fix safety switch option handling
2018-10-05 10:25:11 +09:00
Andrew Tridgell
4a1348a432
HAL_ChibiOS: fixed a race in DShot code
...
this fixes a problem found by Daniel Met with the copter 3.6 beta
release
2018-10-05 10:24:59 +09:00
Michael du Breuil
62f997d73c
AP_AHRS: Internalize EKF getLLH altitude management
2018-10-05 10:23:53 +09:00
Michael du Breuil
294737abc8
AP_NavEKF3: Fix roundoff, and missing offset handling of getLLH
2018-10-05 10:23:50 +09:00
Michael du Breuil
85e3aea8b7
AP_NavEKF2: Fix roundoff, and missing offset handling of getLLH
2018-10-05 10:23:48 +09:00
Andrew Tridgell
1fd5017fab
AP_Compass: use rotation_equal() from AP_Compass
2018-10-01 14:29:08 +09:00
Andrew Tridgell
e90e89b687
AP_Math: added rotation_equal()
2018-10-01 14:29:05 +09:00
Andrew Tridgell
2ad2bb43f8
AP_Compass: fixed handling of duplication rotations
...
we have some rotations that are duplicated, such as ROLL_180_YAW_90
and PITCH_180_YAW_270. This copes with those in the auto-orientation
code
2018-10-01 14:29:02 +09:00
Randy Mackay
d78c7631d4
Compass: fix compile warning in calibrator output
2018-10-01 14:28:55 +09:00
Andrew Tridgell
2f637225f2
HAL_ChibiOS: fixed RSSI voltage from IOMCU
2018-10-01 11:54:43 +09:00
Leonard Hall
4679afdf31
AC_AttitudeControl: Add missing variable initalisations
2018-09-15 10:16:25 +09:00
Leonard Hall
dfa20484fa
AC_PID: Fix D term initialisation
2018-09-15 10:16:04 +09:00
Michael du Breuil
a3a8783e28
AC_AttitudeControl: Use reset_rate_controller_I_terms() helper
2018-09-15 10:16:02 +09:00
Randy Mackay
5904393170
AP_Arming: rename rudder_arming to get_rudder_arming_type
2018-09-15 10:12:44 +09:00
Randy Mackay
0baf808c5a
AP_Arming: minor format fix
2018-09-15 10:12:27 +09:00
Randy Mackay
fec32e4e0c
AP_Arming: add RUDDER parameter
2018-09-15 10:12:23 +09:00
Leonard Hall
4afb6a5d2c
AC_PosControl: Fix divide by zero check in limit_vector_length
2018-09-15 10:11:02 +09:00
Leonard Hall
aa0d8cb386
AC_AttitudeControl: Add minimum angle limit for get_althold_lean_angle_max
2018-09-15 10:11:00 +09:00
Andrew Tridgell
313baec2fd
HAL_ChibiOS: fixed ADC bug
...
this caused bad analog readings when the number of channels being read
was more than the number of hw channels
thanks to @vierfuffzig for reporting!
2018-09-15 10:06:39 +09:00
Andrew Tridgell
f79404457f
AP_Compass: default COMPASS_AUTO_ROT to 2 for all boards
...
we're confident of this code now
2018-09-14 15:17:05 +10:00
Andrew Tridgell
a4d19e1f34
AP_Notify: fixed remote play tune
2018-09-08 09:54:32 +09:00
Andrew Tridgell
cfe0fb61e1
AP_Notify: fixed oled probe on first bus
...
Thanks to Erwin Quilloy for helping to track this down
2018-09-08 09:54:31 +09:00
Andrew Tridgell
986a1eb72f
AP_IOMCU: cope with IOMCU reset in flight
...
this copes with IOMCU reset when we have safety forced off
2018-09-08 09:21:49 +09:00
Leonard Hall
74a1afd5f3
AC_Loiter: reduce twitch on init
2018-09-08 09:21:11 +09:00
Leonard Hall
e70548bacf
AC_PosControl: reduce glitch on init
2018-09-08 09:21:08 +09:00
Leonard Hall
1098890155
AC_PID_2D: add reset for filter and D term
2018-09-08 09:21:04 +09:00
Matt
6fda807e49
AP_LandingGear: Remove deploy_lock state
2018-09-03 16:50:13 +09:00
pierre-louis.k
ffe854063b
AP_RangeFinder: Remove range enforcement on out of range
2018-08-27 12:34:16 +09:00
pierre-louis.k
ec21de5ed9
AP_RangeFinder: Rework function structure in TeraRanger driver
2018-08-27 12:34:13 +09:00
pierre-louis.k
5069540ad0
AP_RangeFinder: Rename function in TeraRanger driver
2018-08-27 12:34:11 +09:00
pierre-louis.k
b9af00e7dd
AP_RangeFinder: Give back semaphore on whoami error
2018-08-27 12:34:09 +09:00
pierre-louis.k
b0acac0f55
AP_RangeFinder: Clean TeraRanger driver
2018-08-27 12:34:07 +09:00
pierre-louis.k
d1937a6334
AP_RangeFinder: Add error codes rejection for TeraRanger sensors
2018-08-27 12:34:04 +09:00
pierre-louis.k
5a5fdf9c79
AP_Proximity: Change min and max range to support both 60m and 600Hz
2018-08-27 12:33:57 +09:00
Mateusz Sadowski
f6dc6edc04
AP_Proximity: Fix sensor order on TeraRanger Tower Evo
2018-08-27 12:33:54 +09:00
Mateusz Sadowski
88a2a123a3
AP_Proximity: Correctly handle TeraRanger Tower Evo initialization
2018-08-27 12:33:51 +09:00
Mateusz Sadowski
0c6d689a3b
AP_Proximity: Change TeraRanger Tower Evo sequence mode to Tower
2018-08-27 12:33:48 +09:00
Mateusz Sadowski
39ea8b835e
AP_Proximity: Add support for TeraRanger Tower Evo
2018-08-27 12:33:46 +09:00
Randy Mackay
681645e324
AP_Motors: include boost_throttle in get_motor_mask
2018-08-27 12:32:27 +09:00
Randy Mackay
22d3ab344c
AP_Motors: add override keyword to get_motor_mask
2018-08-27 12:32:24 +09:00
Peter Barker
be19f6520c
AP_Mission: starts_with_takeoff_cmd skips past mav_cmd_nav_delay
2018-08-27 12:31:02 +09:00
Peter Barker
5cc4015144
AP_Mission: remove pointless else clauses
2018-08-27 12:30:59 +09:00
Andrew Tridgell
f635bc1d81
AP_Notify: new LED drivers
...
update to current master
2018-08-08 12:02:24 +10:00
Andrew Tridgell
87459d520a
AP_ROMFS: fixed error handling in tinflate
...
coverity CID308327
2018-08-07 13:27:47 +10:00
Andrew Tridgell
2b3054c8f6
AP_RCProtocol: Fix out of bounds write, CID 308323 and 308333
2018-08-07 13:27:45 +10:00
Peter Barker
7fbcaaae11
RC_Channels: zero all channels before populating
...
Fix for CID 308365
2018-08-07 09:42:49 +10:00
Andrew Tridgell
f59288ce83
AP_Stats: use set_and_save_ifchanged()
...
if the board has no GPS then the values usually don't change
2018-08-06 21:46:42 +10:00
Andrew Tridgell
2fb84b22c6
HAL_ChibiOS: updated F745 and OmnibusNanoV6
2018-08-06 19:27:19 +10:00
Andrew Tridgell
c249e26a03
HAL_ChibiOS: added a DMA reserve heap
...
this ensures we keep some DMA-capable memory aside for when it is
needed
2018-08-06 15:58:51 +10:00
Andrew Tridgell
d1c271cd13
HAL_ChibiOS: raise timer thread priority
...
needs to be above main for guaranteed DShot and oneshot output periods
2018-08-06 11:40:38 +10:00
Andrew Tridgell
bc2b5661c8
HAL_ChibiOS: fixed build
2018-08-06 11:40:03 +10:00
Andrew Tridgell
65df9ace57
AP_BLHeli: pass motor mask to serial_setup_output()
2018-08-06 11:17:33 +10:00
Andrew Tridgell
126333c3b5
AP_BLHeli: improved reliability of pass-thru support
...
this uses a connection cache to prevent re-connecting to an ESC when
not needed, and allows for pass-thru comms on any port, using
SERVO_BLH_PORT parameter
2018-08-06 11:17:30 +10:00
Andrew Tridgell
e4c9257e6f
HAL_ChibiOS: fixed dshot bad frames
...
adding a pre-bit on the DMAR, and ensuring that all groups are setup
for DMA together fixes the remaining bad frames reports in BLHeli32
2018-08-06 11:17:15 +10:00
Andrew Tridgell
660985db8e
HAL_ChibiOS: set min dshot separation to 100usec
...
this fixes a problem with BLHeli32 not recognising dshot
2018-08-06 11:17:11 +10:00
Andrew Tridgell
4db2c4a380
HAL_ChibiOS: fixed timeout of serial read bytes
...
this allows for fast timeout of serial read bytes in BLHeli pass-thru
2018-08-06 11:17:05 +10:00
Andrew Tridgell
c41ef82b57
AP_HAL: added chanmask to serial_setup_output()
2018-08-06 11:15:59 +10:00
Randy Mackay
bc4a5d0367
AP_Follow: fixup offset initialisation
2018-08-02 12:39:05 +09:00
hoangthien94
376fdc5cf1
AP_Follow: Initialize offsets based on offset type
2018-08-02 12:39:04 +09:00
Randy Mackay
242e0a7c0a
AP_Follow: fix initialisation of offsets
2018-08-02 12:39:03 +09:00
Randy Mackay
30f369c3b4
AP_Follow: update FOLL log column names
...
VelN is easier to understand than VelX
Also minor formatting fix
2018-08-02 12:39:03 +09:00
Randy Mackay
31c2c86e71
AP_Follow: fix reporting to GCS
2018-08-02 12:39:02 +09:00
Andrew Tridgell
1bc1f33cad
HAL_ChibiOS: updates to hwdef.dat from plane3.9.0
2018-08-02 12:39:01 +09:00
Andrew Tridgell
83b39445e1
HAL_PX4: updated to new tonealarm system
2018-08-02 12:39:00 +09:00
Andrew Tridgell
addbe3cbd5
HAL_Linux: updated to new tonealarm system
2018-08-02 12:38:59 +09:00
Andrew Tridgell
b1b6061ad4
HAL_ChibiOS: updated to new tonealarm system
2018-08-02 12:38:58 +09:00