Peter Barker
df3267c9ba
waf: remove SKETCH and SKETCHNAME from build sysmte
...
... renaming one of them to AP_BUILD_TARGET
2024-02-26 15:42:25 +11:00
Iampete1
416a41e756
AP_HAL_ChibiOS: Only test SPI clock if SPI is enabled
2024-01-10 13:46:40 +11:00
bugobliterator
bea8b25c5d
AP_HAL_ChibiOS: add support for early initialisation of WATCHDOG
...
This is needed for Ardupilot Vehicle builds running on AP_Periph bootloaders
2024-01-08 07:05:34 +11:00
Peter Barker
d5ddbad27f
HAL_ChibiOS_Class: adjust for dsp disappearing from HAL constructor
2024-01-03 11:45:31 +11:00
Thomas Watson
dc4438d0e3
AP_HAL_ChibiOS: eliminate legacy UART ordering/references
...
SERIAL_ORDER has been around for a few years now and UART_ORDER is
rejected by the hwdef script, so support for UART_ORDER and associated
processing in the hwdef script is removed, along with the order
conversion script.
2023-12-19 06:53:15 +11:00
Thomas Watson
507ab623b2
AP_HAL_ChibiOS: pass UARTs to AP_HAL in SERIALn order
2023-12-19 06:53:15 +11:00
Thomas Watson
a9ddadee3b
AP_HAL_ChibiOS: introduce get_HAL_mutable() to complement get_HAL()
...
Returns a mutable reference to the same HAL for certain purposes where
the HAL needs to be mutated to avoid UB problems with casting away const
and to make the fact that mutation is happening obvious.
2023-11-28 08:24:25 +11:00
Andrew Tridgell
4946ce5431
HAL_ChibiOS: revert recent USB changes
...
these are causing some boards to crash on startup. Tested with a
QiotekZealotH743 which doesn't get out of setup_usb_strings()
once we have debugged this we can re-add the functionality
2023-06-03 16:50:30 +10:00
bugobliterator
0c5d19ff44
AP_HAL_ChibiOS: initialise SDCard before starting USB
2023-05-31 18:40:17 +10:00
bugobliterator
b5617a9ff8
Revert "AP_HAL_ChibiOS: disable watchdog in hwdef.h not in-line in code"
...
This reverts commit ccfad8ceea
.
2023-05-23 09:00:11 +10:00
Henry Wurzburg
d0ac8f3016
AP_HAL_ChibiOS: normalize SerialManagers ports defaults to allow inclusion in hwdefs
2023-05-11 18:45:53 +10:00
Andy Piper
f8dd6a1b2a
AP_HAL_ChibiOS: rename QSPIDevice to WSPIDevice
2023-04-28 08:31:15 +10:00
bugobliterator
2ac7dcc764
AP_HAL_ChibiOS: use HAL_SERIAL0_BAUD_DEFAULT when setting up serial(0)
2023-04-26 18:04:00 +10:00
Peter Barker
ccfad8ceea
AP_HAL_ChibiOS: disable watchdog in hwdef.h not in-line in code
2023-02-01 18:44:06 +11:00
Peter Barker
ecde9f8c3f
AP_HAL_ChibiOS: make HAL_FLASH_PROTECTION a boolean, stop checking for definition
2022-08-16 08:10:16 +10:00
Peter Barker
13b03f79db
AP_HAL_ChibiOS: move from HAL_NO_SHARED_DMA to AP_HAL_SHARED_DMA_ENABLED
...
This allows hwdef files to manipulate this value
2022-07-19 18:02:26 +10:00
Peter Barker
8b2f85756a
AP_HAL_ChibiOS: instantiate SIMState object in HAL
2022-03-17 14:39:55 +11:00
Andy Piper
ed952a0ea0
AP_HAL_ChibiOS: allow flash to be write-protected/unprotected on reboot
...
control protection support via HAL_FLASH_PROTECTION
provide support for flash protection on SPRacingH7
SPRacingH7 bootloader needs to use w25q-dtr
2022-02-24 10:19:07 +11:00
Andrew Tridgell
638e20a0b9
HAL_ChibiOS: bring in hal.h where it is needed
2022-02-22 12:13:19 +11:00
Andrew Tridgell
fc6a82de1b
AP_HAL_ChibiOS: support up to 9 UARTs
2021-11-22 22:48:59 +11:00
bugobliterator
418ac60373
AP_HAL_ChibiOS: disable watchdog when DISABLE_WATCHDOG is defined
2021-11-05 07:38:43 +11:00
Siddharth Purohit
28dbbc2bc4
AP_HAL_ChibiOS: do not even initialise empty qspi driver
2021-06-30 19:33:17 +10:00
Siddharth Purohit
abc26d1993
AP_HAL_ChibiOS: add QSPI Device Driver in HAL
2021-06-30 19:33:17 +10:00
Dr.-Ing. Amilcar do Carmo Lucas
fc7e242bae
AP_HAL_ChibiOS: Fix typo (NFC)
2021-05-21 09:43:10 +10:00
Andrew Tridgell
88e277420f
AP_HAL_ChibiOS: removed assert calls
...
these waste flash space and do not do us any good
2021-03-25 14:03:40 +11:00
Andy Piper
e1d71486e4
AP_HAL_ChibiOS: build fixes for ChibiOS 20.3.x
2021-03-23 12:01:20 +11:00
Andrew Tridgell
243cf2199d
HAL_ChibiOS: disable shared DMA on IOMCU
...
this saves about 600 bytes of ram
2021-02-24 18:21:08 +11:00
Andrew Tridgell
5c823debc0
HAL_ChibiOS: support saving persistent parameters to bootloader sector
...
when we flash the bootloader we can save key peristent parameters to
the end of the bootloader sector, allowing them to persistent across
changes of firmware type
This allows for factory temperature calibration
2021-01-21 13:09:21 +11:00
Andy Piper
07f199ea1a
AP_HAL_ChibiOS: rename system_initialized() and add is_system_initialized()
2020-12-30 18:16:59 +11:00
Andrew Tridgell
bf546f363d
HAL_ChibiOS: don't init serial 1 and 3
...
these should not be treated as special. Initialising them early just
wastes memory if the end up not being used
2020-12-15 10:32:46 +11:00
Andrew Tridgell
e54fc4b0de
AP_HAL_ChibiOS: convert to using hal.serial() instead of hal.uartX
2020-12-15 10:32:46 +11:00
Andrew Tridgell
3ba46d5bd9
HAL_ChibiOS: enable reporting of watchdog reset on AP_Periph
2020-12-01 11:14:50 +11:00
Andrew Tridgell
4d171ec19a
AP_HAL_ChibiOS: support uartI, allowing a total of 9 uarts
...
this allows for OTG2 on the MatekH743 board, which makes SLCAN much
easier
2020-11-30 14:09:31 +11:00
Andrew Tridgell
280e9d1c41
HAL_ChibiOS: fixed bootloader build
2020-11-10 16:15:45 +11:00
Andrew Tridgell
ac566763fe
HAL_ChibiOS: disable loop delay on replay
2020-11-10 16:15:45 +11:00
Siddharth Purohit
cdf8e369f1
AP_HAL_ChibiOS: create UAVCAN agnostic CANIface driver
...
HAL_ChibiOS
2020-08-19 17:31:09 +10:00
Peter Barker
48da4e523c
AP_HAL_ChibiOS: create and use INTERNAL_ERROR macro so we get line numbers
2020-04-30 13:21:36 +10:00
Andrew Tridgell
0ef66659ce
HAL_ChibiOS: log WDOG message once a second
...
this copes with delayed mounting of the microSD, making it much more
likely we log the critical data
2020-04-29 07:36:55 +10:00
Andrew Tridgell
c61cecdbc7
HAL_ChibiOS: report thread name in watchdog
2020-04-29 07:36:55 +10:00
Peter Barker
9ba2aecbb8
AP_HAL_ChibiOS: send statustext at regular intervals after watchdog reset
2020-03-31 14:30:11 +11:00
Peter Barker
a59c3670c8
AP_HAL_ChibiOS: stash lr_thd in watchdog hardfault handler
2020-03-19 16:03:58 +11:00
Andy Piper
3d0cf7e12a
AP_HAL_ChibiOS: hardware M4-Cortex and M7-Cortex (and H7) implementation of HAL FFT abstraction
...
implements an FFT engine based on the betaflight feature using ARM hardware accelerated CMSIS library
make the FFT feature optional
add dynamic gyro windows
add quinns and candans estimators and record in DSP state
disable DSP for boards with limited flash
calculate power spectrum rather than amplitude
start/analyse version of analysis to support threading
allocate memory in a specific region
constrain window size by CPU class
control inclusion of DSP based on board size
2020-02-22 11:15:37 +11:00
Andrew Tridgell
e8ab35a192
HAL_ChibiOS: fixed stdout in early startup bug
...
this caused a failure to boot on some boards if they tried to print
messages in early startup code before hal was initialised
thanks to @Shadowru for reporting the issue
2020-02-12 13:51:10 +11:00
Mirko Denecke
b84dcd483d
AP_HAL_ChibiOS: remove unnecessary tabs and whitespaces
2019-10-21 08:01:56 +11:00
Andrew Tridgell
63f39c2bd6
HAL_ChibiOS: fixed build of iomcu firmware
2019-08-27 10:29:56 +10:00
Andrew Tridgell
16bdaaa1af
HAL_ChibiOS: added support for STM31F10x for AP_Periph
2019-08-27 10:29:56 +10:00
Andrew Tridgell
12dd33ac2b
HAL_ChibiOS: added logging of hardware fault information in watchdog
...
this may help trackdown software bugs that trigger hard faults
2019-07-19 16:02:41 +10:00
Andrew Tridgell
2d5e4dcfa2
HAL_ChibiOS: fixed SemLine data in WDOG msg
...
semline was being overwritten in the setup() call
2019-07-15 08:08:54 +10:00
Andrew Tridgell
0075b96f3a
HAL_ChibiOS: added uartH
2019-07-12 17:01:21 +10:00
Peter Barker
f5190d1bcc
AP_HAL_ChibiOS: use logger().WriteCritical(...) for WDOG message
2019-05-16 17:21:24 +10:00