Commit Graph

1274 Commits

Author SHA1 Message Date
Jason Short b199fb22a2 Added code for self centering throttle - disabled by default. 2012-07-01 13:40:11 -07:00
Andrew Tridgell e791cad9ef AnalogSource: convert analogRead() calls to the new API
this should give us much better analog values, plus save a bunch of
CPU time
2012-07-01 15:01:05 +10:00
rmackay9 9624f8c179 ArduCopter: updated STABILIZE_ROLL_I to 0.01 (was 0.1) as instructed by Marco 2012-06-30 19:26:14 +09:00
Jason Short 60cdbe771c Circle_WP distance check fix 2012-06-29 21:20:28 -07:00
Jason Short d448ea23e6 Commands.pde: increased bad WP distance check 2012-06-29 21:20:28 -07:00
Jason Short d893cde785 navigation.pde : Added a drag/velocity prediction filter for improved I term wind correction. 2012-06-29 21:20:28 -07:00
Jason Short 59181eab3d System.pde: Toy mode details for set_mode() 2012-06-29 21:20:28 -07:00
Jason Short 7178da3538 GCS_Mavlink: added notes to #if malink10 2012-06-29 21:20:28 -07:00
Jason Short 49243bc206 defines.h: Toy Mode defines for flight modes 2012-06-29 21:20:28 -07:00
Jason Short 40e0d88d12 Config.h: Optimizing Nav gains 2012-06-29 21:20:28 -07:00
Jason Short bcf6c03157 Attitude.pde: Toy mode logic 2012-06-29 21:20:27 -07:00
Jason Short 146a4b021f Arducopter.pde: Added Toy mode refinements 2012-06-29 21:20:27 -07:00
Jason Short eb06320559 Params: Added toy_yate_rate 2012-06-29 21:20:27 -07:00
Jason Short 57b75736ce Added Toy mode to navigation 2012-06-29 21:20:27 -07:00
Jason Short c830ab6ded Aeducopter.pde: Toy mode updates 2012-06-29 21:20:27 -07:00
Adam M Rivera d399143498 commands_process.pde: Bug fix 427. By default, the copter would land after an AUTO mission. Updated to check for valid approach altitude at end of mission. 2012-06-29 21:41:56 -05:00
Andrew Tridgell 1cb96e14a9 SITL: enable the SIM_* parameters in ArduCopter and ArduPlane 2012-06-29 15:10:52 +10:00
Adam M Rivera 44ce8fc4bc ArduCopter: Loiter Timer should have been set when the approach altitude was set. Previously, land had to be enabled before auto approach would work. 2012-06-28 20:34:53 -05:00
Andrew Tridgell 7883c4a545 ACM: ArduCopter updates for new compass interface 2012-06-27 16:01:50 +10:00
Andrew Tridgell 7eb150a2f0 ACM: adapt the ArduCopter code for new barometer interface 2012-06-27 16:01:50 +10:00
Andrew Tridgell d71e82191f ACM: enable GPS in AHRS for ArduCopter
this is an experiment in centripetal correction for multicopters
2012-06-27 16:01:49 +10:00
Jason Short 57e4fabb57 Attitude.pde: Turned off boost_p for nav_throttle based on Testing feedback from Marco. 2012-06-26 10:39:42 -07:00
Jason Short 3fcd3100cc Added user editable define for Super simple radius 2012-06-26 10:38:46 -07:00
rmackay9 c034e38cbd ArduCopter HIL: changed calls to setHIL to send in time as a uint32_t (it was a float) 2012-06-26 22:50:17 +09:00
Jason Short 91cde15c27 Attitude.pde - Added small boost to alt hold for takeoff. 2012-06-25 23:12:19 -07:00
Jason Short 711bbeb6f3 GCS_Mavlink.pde : mav_nav only used in legacy Mavlink. 2012-06-25 23:08:25 -07:00
Jason Short 4a85c40f03 Added Toy Mode control 2012-06-25 23:08:25 -07:00
Jason Short 03879d9113 Added Toy Mode defines 2012-06-25 23:08:25 -07:00
Jason Short 4872880134 Arducopter.pde : Added Approach mode, added "Toy" mode fun code I'm playing with.
Added landing code to make landing happen closer to home loc
Added check for distance to Loiter WP before overriding a new Loiter position.
Moved calc_loiter_pitch_roll() to 50 hz.
removed the nav_bearing var - not used with new crosstrack.
2012-06-25 23:08:25 -07:00
Jason Short efc74a87aa commands.pde: fixed unit error for distance check 2012-06-25 23:06:28 -07:00
Jason Short 7a5347fb1f Config.h : New Gains based on testing, new Crosstrack gain. from 1.0 to .2 because of new algorithm 2012-06-25 23:06:28 -07:00
Jason Short 81c684664b GCS Mavlink.pde: change reference to nav_bearing to target_bearing. 2012-06-25 23:06:28 -07:00
Jason Short 50b3ef66a7 Navigation.pde : removed old cross tracking from Arduplane. Added new 2D cross tracking. Added use of GPS velocity when above 1.5m/s 2012-06-25 23:06:28 -07:00
Jason Short 2fdbbb87f2 inertia.pde: WIP don't fly with inertia enabled until FN. 2012-06-25 23:06:28 -07:00
Jason Short 900f169c44 Log.pde: removed nav_bearing reference and replaced with target_bearing ref 2012-06-25 23:06:28 -07:00
Andreas M. Antonopoulos 678b12af25 AC2.6: Fix battery calculation and scaling bug for MAV1.0, now same as ArduPlane
http://code.google.com/p/arducopter/issues/detail?id=430
2012-06-24 17:01:25 -07:00
Robert Lefebvre 7eae382a22 Open up constraint on Rate Yaw Output for all copters. 2012-06-22 10:06:01 -04:00
Jason Short 014f0f9a99 Config.h - returned low to original 120 2012-06-20 15:22:35 -07:00
Jason Short 95f3041d25 Parameters.h: throttle_min and throttle_max now have defaults from Config.h 2012-06-20 15:02:00 -07:00
Jason Short b8016dfe48 changed define to a param for throttle_min and throttle_max 2012-06-20 15:00:53 -07:00
Jason Short ef847eecbb changed define to param for throttle_min 2012-06-20 15:00:05 -07:00
Jason Short 8ef60f2d75 Added throttle_min as a user definable param 2012-06-20 14:58:34 -07:00
Jason Short 25a67c9953 lowered minimum throttle 2012-06-20 08:47:47 -07:00
Jason Short 0ccf5724aa Small fix to angle boost - increases by about 20% to deal with inefficiencies of non-downward thrust 2012-06-20 08:47:47 -07:00
Jason Short d7fab41234 decreased I term based on the tests last weekend in high winds 2012-06-20 08:47:47 -07:00
Jason Short a0978e06e5 Adjustments to the Inertial_nav
lowered Rate_I and Rate_P to be less jumpy. raised throttle_p
added a clear to rate when entering loiter
moved the raw reporting
2012-06-20 08:47:47 -07:00
Andrew Tridgell 5525180814 MAVLink: make usage of MAVLink defines more consistent 2012-06-15 16:27:11 +10:00
rmackay9 6b16ca190f ArduCopter: updated firmware to simply 2.6 (i.e. removed Epsilon) ahead of the release 2012-06-15 00:42:59 +09:00
Jason Short e261c62e6b Inertial Nav disabled by default 2012-06-13 22:37:52 -07:00
Jason Short 6dc1e02f76 Inertial Control
I added inertial navigation based on the simulator data. This is an option only available if you compile with Arduino and set
#define INERTIAL_NAV ENABLED
in the APM_Config.h file.

This has been tested for one real flight and did not crash my quad, but consider it very alpha. The quad may be unpredictable at first until the error correction fixes poorly calibrated accels. Be Careful.

Most of the real work is in the inertia file, but the error correction, new variable defines and calibration calls are sprinkled throughout.

The Log should record RAW messages with special debugging values.
2012-06-13 22:34:45 -07:00
rmackay9 3618ac62e0 ArduCopter: made Robert's new yaw method optional (off by default).
Add this line to APM_Config.h to enable Robert's yaw
#define ALTERNATIVE_YAW_MODE ENABLED
2012-06-13 21:50:16 +09:00
Jason Short ee78818f5a Raised the Max throttle to 1000, min to 200. Worked good in SIM with Tridge's motor safety patch. 2012-06-12 13:58:49 -07:00
rmackay9 c9093a1609 ArduCopter: updated firmware version to 2.6 Epsilon 2012-06-12 23:22:57 +09:00
rmackay9 1b9ed1444e ArduCopter: updated standard loiter pids.
Loiter_P (speed from distance to target) = 0.2 (was 0.35)
Loiter_Rate_P (lean angle from desired acceleration) = 2.4 (was 2.5)
Loiter_Rate_I = unchanged at 0.08
Loiter_Rate_D = 0.40 (was 0.45)
2012-06-12 20:56:31 +09:00
Jason Short ebff84d41e Added Angel's name to contrib list 2012-06-10 12:38:22 -07:00
Andrew Tridgell 8f1121c980 GPS: Use appropiate GPS_ENGINE settings in APM, ACM and rover 2012-06-10 16:36:18 +10:00
rmackay9 df72f70aba ArduCopter: updated firmware version to 2.6 Delta ahead of the next round of testing (and hopefully soon a release) 2012-06-08 21:54:09 +09:00
Andrew Tridgell bfb2c1ee87 GPS: open the GPS serial port with a 256 byte buffer
the UBLOX needs more than 128 bytes for reliable parsing
2012-06-08 16:42:03 +10:00
Robert Lefebvre 3e6f37d540 Opening up the Yaw Rate constraint for Trad Heli. 2012-06-07 22:40:25 -04:00
Robert Lefebvre 1b789b7928 Yaw Fix
Modified Nav_Yaw controller to better track intended heading changes.
2012-06-07 17:15:33 -04:00
Jason Short 71111a5816 Stabilization patches
removed Angle error limit for stabilization
constricted Iterm to +- 5° error and limited the implementation to when the quad is +- 5° from center
doubled the output limit for Rate controller.
increased default Rate_P gain to .18 with matching Rate_D of .004
Tested in the SIM and in backyard. dramatically increases performance and quad no longer overshoots and flips when pushed hard.
2012-06-05 16:41:44 -07:00
rmackay9 cad76d4e0f ArduCopter: updated firmware description to 2.6 Gamma 2012-06-05 21:28:13 +09:00
Andrew Tridgell af1573ad30 ACM: prevent link flood with "Low Battery" warnings
thanks to Marco for noticing this
2012-06-05 11:31:40 +10:00
Michael Oborne 1423810247 AC: add hilstate message 2012-06-04 16:24:08 +08:00
Jason Short 9cadd8c1db Bug fix: When adjusting altitude, RTL then land will fail unless this var is reset to false. 2012-06-03 22:25:27 -07:00
Jason Short 60c89ee117 Updates to Flip:
Ability to abort flip mode if things go wrong
init function to re-enter flip mode if aborted
2012-06-03 22:15:19 -07:00
Andrew Tridgell 13ae16e0c5 ACM: MAVLINK10 uses HIL_STATE
thanks to Michael for noticing this
2012-06-04 13:31:07 +10:00
Andrew Tridgell 8d28cb51fc added mavlink09 targets
allows easier building with mavlink0.9
2012-06-04 13:14:52 +10:00
Andrew Tridgell 0721089acd ACM: fixed HIL build for MAVLINK10 2012-06-04 13:14:52 +10:00
Michael Oborne 45c3c101fe fix AC hil build 2012-06-04 11:12:52 +08:00
Michael Oborne 7d2532450a enable mavlink10 by default 2012-06-04 08:02:08 +08:00
Jason Short f2edc87797 Added note to remove this unused param 2012-06-03 11:13:50 -07:00
Jason Short 9723e52a01 using current PWM rather than a re-read of the PWM. 2012-06-03 11:13:50 -07:00
Jason Short 5ce93faf51 Moved PID logging counter into define 2012-06-03 11:13:50 -07:00
rmackay9 826cffe688 ArduCopter: Ensure update_GPS does nothing when gps is disabled.
This fixes a bug in which an APM without a GPS would not work because it would constantly scan for a valid GPS long after it should have given up and moved on.
2012-06-03 23:48:45 +09:00
rmackay9 68de4e0259 ArduCopter: updated firmware version to 2.6Beta in preparation for beginning of testing 2012-06-03 17:02:35 +09:00
rmackay9 09695602d2 ArduCopter: updated firmware version to 2.6Beta in preparation for beginning of testing 2012-06-03 16:59:23 +09:00
rmackay9 8f8e91a620 ArduCopter: Another attempt at fixing the lat/lon printing bug in which small negative lattitudes or longitudes were appearing as positives.
Fixed in both ArduCopter Log.pde and the GPS Auto test sketch
2012-06-03 16:58:19 +09:00
rmackay9 df3fb5c041 ArduCopter: fixed print_latlon bug in which it would print negative lat/lon numbers incorrectly (i.e. -1234567890 would be printed as -124.xxx). 2012-06-02 12:51:12 +09:00
Jason Short 477aa6e47a RC_Channel fix for throttle output.
throttle was outputting incorrectly and allowing the user to max out the throttle leaving nothing for attitude control
2012-05-31 14:59:03 -07:00
Robert Lefebvre bafb478924 TradHeli: Incorporating Ext ESC Control 2012-05-30 21:50:25 -04:00
Robert Lefebvre 3df1aac936 Change to increase Parameter space as we have run out.
This will decrease the max number of waypoints from 186
to 169.
2012-05-30 20:41:53 -04:00
Jason Short abb426aec3 When RTLing, force home as the final location for loiter. 2012-05-30 11:06:41 -07:00
Jason Short 5b31f3ba27 moved detector to run until the throttle is low, then stop running. 2012-05-30 09:44:59 -07:00
Jason Short 42032f9845 Missed a Semicolon 2012-05-30 09:36:16 -07:00
Jason Short e6ee50f53d Altered the ground detector logic to no continuously run when landed 2012-05-30 09:34:31 -07:00
Jason Short c45209eaff Broken timer - removed 2012-05-29 12:56:38 -07:00
Jason Short 93d7712c9a Removed unused variable 2012-05-29 12:43:23 -07:00
Jason Short 9ea54b3171 Lowered I term - causes oscillations in SIM 2012-05-29 12:43:01 -07:00
Jason Short 2ae5d50261 Renamed some variables to clarify functionality. 2012-05-29 12:42:37 -07:00
Jason Short 33d1b5a137 Speed up automatic disarming to 25 seconds for safety.
renamed AUTO_ARMING_DELAY to AUTO_DISARMING_DELAY
2012-05-29 12:41:35 -07:00
Jason Short 3ba6e1db7a Removed references to a takeoff timer 2012-05-29 11:28:40 -07:00
Jason Short c523a9822b Failsafe: Looking for takeoff_complete now vs unreliable GPS 2012-05-29 11:25:04 -07:00
Jason Short 394f8c6eb0 pulling throttle low in flight turns out to be more common than thought. Removed clearing of takeoff_complete flag. This is still cleared during disarm which is automatic after 30 seconds of no throttle. 2012-05-29 11:25:04 -07:00
Jason Short a3a90287f4 changed the way takeoff complete is figured. Looking for high throttle. 2012-05-29 11:25:04 -07:00
Jason Short 72758ff3ab Added note to functionality 2012-05-29 11:25:04 -07:00
Jason Short 996cfc5c96 changed WP radius to AP_Int16 2012-05-28 22:39:29 -07:00
Jason Short 4ed48510dc reversed circle_WP calculation so the next_WP refers to the destination around the circle and circle_WP refers to the center. The intent is to make it easier to see via ground station. 2012-05-27 09:21:20 -07:00
Jason Short e2086decc6 Arducopter.pde : setting rtl_approach_alt above 1 would force auto landing even if auto-landing was disabled. 2012-05-23 22:00:56 -07:00
Andrew Tridgell 1fc8347af3 MAVLink: send time of GPS fix accurately
when we send a GPS_RAW message, set the usec field to the time we got
the fix from the GPS, not the current time. This makes it possible for
aerial photo processing to be more accurate, as the usec field with
more accurately reflect the planes position/time pair
2012-05-23 17:33:33 +10:00