Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
59,961 Commits 71 Branches 508 Tags 635 MiB
Commit Graph

28 Commits

Author SHA1 Message Date
Andrew Tridgell 5908508811 hwdef: default most boards to MAVLink2 for 2nd USB endpoint 
only CubeOrange and CubeBlack left as SLCAN
 2023-07-31 19:03:13 +10:00
Peter Barker 338a4d6b38 hwdef: remove HAL_BOARD_LOG_DIRECTORY and HAL_BOARD_TERRAIN_DIRECTORY defaults 
these are now defaulted in chibios_hwdef.py
 2023-07-19 17:25:18 +09:00
Andrew Tridgell 32578b796b hwdef: fixed polarity of VDD_5V_PERIPH_EN on several boards 
we can tell these are incorrect as they init to LOW, and previously we
didn't have handling of VDD_5V_PERIPH_EN, so we know that LOW is
enabled or the boards would not have worked

this fixes GPS on Pixhawk1
 2023-03-17 17:40:51 +11:00
bugobliterator 8651d99de6 HAL_ChibiOS: move to using parameter STORAGE_FLASH_PAGE instead of define 2021-10-30 19:24:57 +11:00
Andrew Tridgell 68146d541c HAL_ChibiOS: removed boilerplate lines from bootloaders 2021-10-26 15:56:53 +11:00
Andrew Tridgell 91dce554d1 HAL_ChibiOS: removed unnecessary USB product IDs from boards 2021-05-27 09:30:30 +09:00
Andrew Tridgell bbd32844d1 HAL_ChibiOS: switch more boards to 32k FRAM 
this enables the parameter backup/restore on those boards, as well as
more waypoints

This is in response to a report that CUAVv5 boards can suffer from the
parameter reset issue
 2021-03-21 11:59:12 +11:00
Andrew Tridgell fb1dcdb059 HAL_ChibiOS: added BL suffix to bootloader USB IDs for two boards 
our convention is to have -BL on end of USB product IDs in bootloaders
 2020-10-13 17:59:13 +11:00
Phillip Kocmoud 0d5a0f392c hwdef.dat update x2.1-777 2020-06-04 09:51:27 +10:00
Andrew Tridgell 571fbf8f71 HAL_ChibiOS: update power VALID pins 2020-06-04 09:51:27 +10:00
Peter Barker 967f8bf726 AP_HAL_ChibiOS: correct description of where stdout goes 2020-05-05 07:57:57 +10:00
Andrew Tridgell a5965d5a9e HAL_Chibios: removed unnecessary debug defines 2020-04-29 07:36:55 +10:00
Andrew Tridgell 32cdfddf12 HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER 
much easier to understand
 2020-04-28 10:32:23 +10:00
Andrew Tridgell a9df9fe0c0 HAL_ChibiOS: removed clock tree settings in most hwdef.dat 
these are better set automatically in the headers. This simplifies the
task of doing a new port
 2020-04-28 10:32:23 +10:00
Andrew Tridgell e8b2b52bae HAL_ChibiOS: removed STM32_VDD from hwdef.dat 
use default
 2020-04-28 10:32:23 +10:00
Andrew Tridgell d35fff5186 HAL_ChibiOS: set CS pins high while in bootloader 
this appears to be the root cause of the parameter resets on
CubeOrange. We need to ensure the CS pin is not floating or random
noise on the SPI bus for FRAM can cause the FRAM to become corrupt
 2020-03-11 09:53:06 +11:00
Andrew Tridgell 793b867706 HAL_ChibiOS: switched to new USB VID for dual-CDC boards 2020-01-06 09:55:26 +11:00
Andrew Tridgell d422825715 HAL_ChibiOS: removed per-board AP_FEATURE_RTSCTS and AP_FEATURE_SBUS_OUT 
not needed any more
 2019-12-18 17:18:44 +11:00
Andrew Tridgell 0317b66139 HAL_ChibiOS: update mRoX21-777 I2C mask 
all external
 2019-11-27 14:25:18 +11:00
Andrew Tridgell e820219202 HAL_ChibiOS: changed optimisation of higher end boards to -O2 
-O3 does not seem to be a win, and takes up a lot more flash
 2019-09-28 08:57:26 +10:00
Andrew Tridgell 98f578394f HAL_ChibiOS: default OTG2 protocol to mavlink2 on most boards 
For boards that haven't yet had a driver update in MissionPlanner to
cope with the 2nd OTG interface this change makes both interfaces work
as MAVLink

This also fixes an issue with connecting under a windows VM within
vmware
 2019-07-26 21:58:57 +10:00
bugobliterator cba98096e9 HAL_ChibiOS: move to using hardcoded heater PWM polarity in iofirmware 2019-07-25 17:05:41 +10:00
Andrew Tridgell 1919268801 HAL_ChibiOS: added OTG2 on all F7 and H7 boards with CAN 
allows for SLCAN on 2nd port
 2019-07-12 17:01:21 +10:00
Phillip Kocmoud 734abe3d7d hwdef: Correct typo for mRo x2.1-777 USB PID 
This needed to match the firmware directory which contains the compiled binaries hosted at http://firmware.ardupilot.org so that MissionPlanner can automatically download and update firmware.
 2019-05-23 11:05:42 +10:00
Andrew Tridgell 2b0a30a2c5 HAL_ChibiOS: ensure we don't overflow bootloader area 
this modifies the ld script to use the maximum size available for the
bootloader, so we can't accidentially grow the bootloader beyond its
max size
 2019-05-06 12:36:41 +10:00
Andrew Tridgell dd835f5fce HAL_ChibiOS: optimize for speed on more boards 2019-02-26 16:18:26 +11:00
Phillip Kocmoud 44fb61da37 HAL_ChibiOS: mRo X2.1-777 / hwdef.dat 
Set proper sensor orientation.
 2018-10-21 07:50:44 +11:00
Phillip Kocmoud f1d223a32a HAL_ChibiOS: Add support for the mRo X2.1-777 
a new flight controller from Mayan Robotics based on the x2.1 upgraded to a STM32F777 MCU
 2018-10-16 09:37:39 +11:00