Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
23,632 Commits 71 Branches 509 Tags 743 MiB
Commit Graph

12153 Commits

Author SHA1 Message Date
Randy Mackay ad697243b3 AP_MotorsMulticopter: initialise some members 
This resolves some Covarity warnings at the cost of a small amount of flash
 2016-08-08 13:31:30 +09:00
Randy Mackay 3c87f67212 AC_PrecLand: initialise some members 
This was not a real problem but it resolves some Covarity warnings
 2016-08-08 13:31:28 +09:00
Leonard Hall 50b694444b AC_AttControl: correct method comments 
No functional change
 2016-08-08 11:24:42 +09:00
priseborough e6f36f04db AP_NavEKF2: Enable automatic use of range finder height 
The EK2_RNG_USE_HGT parameter sets the height (expressed as a percentage of the maximum range of the range finder as set by the RNGFND_MAX_CM parameter) below which the range finder will be used as the primary height source when the vehicle is moving slowly.

When using a height reference other than GPS, the height datum can drift due to air pressure changes if using baro, or due to terrain height changes if using range finder as the primary height source. To ensure that a consistent height datum is available when switching between altitude sources, the WGS-84 height estimate of the EKF's local positi norigin is updated using a
single state Bayes estimator,

If rngfinder or gps height data is lost whilst being used, there will be a fall-back to baro data.
 2016-08-08 10:56:44 +09:00
Tom Pittenger 1586abab8d Revert "AP_Airspeed: Converted library to be stand-alone from APM:Plane." 
This reverts commit 5439257236.
 2016-08-07 17:54:24 -07:00
Tom Pittenger 82777873af Revert "APM_Control: Convert references to AP_Airspeed." 
This reverts commit cc5a2417a6.
 2016-08-07 17:54:24 -07:00
Tom Pittenger e5bd23e34a Revert "AP_TECS: Convert references to AP_Airspeed." 
This reverts commit 09d53eaeca.
 2016-08-07 17:54:24 -07:00
Tom Pittenger 44037c13a1 Revert "AP_Vehicle: Removed unused airspeed_min and airspeed_max as now part of AP_Airspeed." 
This reverts commit bf7ab052c1.
 2016-08-07 17:54:24 -07:00
Tom Pittenger 8dad05d12e Revert "Airspeed: store reference in libraries and populate it" 
This reverts commit c090ba2257.
 2016-08-07 17:54:24 -07:00
LukeMike 5987cc273f AP_HAL_VRBRAIN: added some new modules for I2C wrapper 2016-08-07 20:31:52 +10:00
LukeMike 7ee8898948 AP_BoardConfig: updated defines for VRBRAIN 2016-08-07 20:31:52 +10:00
LukeMike 95ae69eb1c VRBRAIN /AP_BoardConfig: changed definition of PWM_SERVO_MODE_12PWM only for VRBRAIN 2016-08-07 20:31:52 +10:00
LukeMike 024d3311b3 VRBRAIN / AP_BoardConfig: enabled PWM configuration and safety management for all VirtualRobotix boards 2016-08-07 20:31:51 +10:00
LukeMike 9f8b66758c VRBRAIN / AP_OpticalFlow: enabled OpticalFlow_PX4 for all VirtualRobotix boards 2016-08-07 20:31:51 +10:00
LukeMike 6748bdb1a4 AP_Notify/ExternalLED: added HIGH and LOW definition 2016-08-07 20:31:51 +10:00
LukeMike 858c22ae21 VRBRAIN /AP_Notify: enabled tone_alarm for all VirtualRobotix boards 2016-08-07 20:31:51 +10:00
LukeMike 13e3150023 VRBRAIN / AP_HAL_Boards: definition of new board VR Brain 5.4 and VR Core 1.0 2016-08-07 20:31:51 +10:00
LukeMike b5cf0308cd VRBRAIN / AP_BattMonitor_Analog: definition of default value for battery monitor for all VirtualRobotix boards 2016-08-07 20:31:51 +10:00
LukeMike 4d8e7f1783 VRBRAIN / AP_Airspeed: defined ARSPD_DEFAULT_PIN for VR Brain 5.4 and VR Core 1.0 2016-08-07 20:31:51 +10:00
LukeMike d8cc2668cb VRBRAIN / AP_AHRS_NavEKF: set AP_AHRS_WITH_EKF1 to 1 only for VR Brain 5.4 2016-08-07 20:31:51 +10:00
LukeMike 998033286d AP_HAL_PX4 / Semaphores: removed AP_HAL_VRBRAIN (for now it's better to have different AP_HAL for PX4 and VRBRAIN) 2016-08-07 20:31:50 +10:00
LukeMike fde5992b6d VRBRAIN: updated AP_HAL_VRBRAIN 2016-08-07 20:31:50 +10:00
Leonard Hall 34055944cd AC_PosControl: fix relax_alt_hold_controllers 2016-08-05 12:40:37 +09:00
Randy Mackay 24044e5611 AC_AttControl: get_throttle_avg_max always returns value in 0 to 1 range 
throttle_avg_max is the total average throttle level (expressed as a number from 0 to 1) that the motors can safely be raised to in order to maintain attitude control.  This level can be higher than the pilot's or autopilot provided throttle level.
Previously passing in a negative throttle_in could result in a negative throttle_avg_max being returned.
 2016-08-05 12:40:37 +09:00
Leonard Hall ac04fcd836 AC_AttControl: fix set_yaw_target_to_current_heading 2016-08-05 12:40:37 +09:00
Leonard Hall 011bc0a350 AC_AttControl: add reset_rate_controller_I_terms() 2016-08-05 12:40:37 +09:00
Tom Pittenger e63e7a5336 AP_NavEKF: comment that param "Enable" index is moved to top 2016-08-04 11:32:46 -07:00
Tom Pittenger 9b33280795 APM_OBC: set param "Enable" to be FLAG_ENABLE and move to top 2016-08-04 11:32:02 -07:00
Tom Pittenger 28648665b9 AP_Terrain: set param "Enable" to be FLAG_ENABLE 2016-08-04 11:31:37 -07:00
Tom Pittenger ebe829614d AP_Parachute: set param "Enable" to be FLAG_ENABLE 2016-08-04 11:31:21 -07:00
Tom Pittenger b1ef848de6 AP_EPM: set param "Enable" to be FLAG_ENABLE 2016-08-04 11:30:50 -07:00
Tom Pittenger 0d14941eea AP_Avoidance: set param "Enable" to be FLAG_ENABLE 2016-08-04 11:30:39 -07:00
Tom Pittenger c07b85f9bb AP_Airspeed: set param "Enable" to be FLAG_ENABLE 2016-08-04 11:30:22 -07:00
Tom Pittenger dd5ed7e2e0 AC_Sprayer: set param "Enable" to be FLAG_ENABLE 2016-08-04 11:30:03 -07:00
Tom Pittenger ccb0151816 AC_PrecLand: set param "Enable" to be FLAG_ENABLE 2016-08-04 11:29:45 -07:00
Tom Pittenger 5e811b8463 AC_Fence: set param "Enable" to be FLAG_ENABLE 2016-08-04 11:29:30 -07:00
Tom Pittenger c090ba2257 Airspeed: store reference in libraries and populate it 
- also had to move the initial definition in plane.h so it happened before the others.
 2016-08-04 11:06:44 -07:00
AndersonRayner bf7ab052c1 AP_Vehicle: Removed unused airspeed_min and airspeed_max as now part of AP_Airspeed. 2016-08-04 10:09:04 -07:00
AndersonRayner 09d53eaeca AP_TECS: Convert references to AP_Airspeed. 2016-08-04 10:09:04 -07:00
AndersonRayner cc5a2417a6 APM_Control: Convert references to AP_Airspeed. 2016-08-04 10:09:04 -07:00
AndersonRayner 5439257236 AP_Airspeed: Converted library to be stand-alone from APM:Plane. 
Additional changes:
   ARSPD_FBW_MIN and ARSPD_FBW_MAX renamed to ARSPD_MIN and ARSPD_MAX
   ARSPD_MIN and ARSPD_MAX changed to floats
 2016-08-04 10:09:04 -07:00
Andrew Tridgell 66c4995c9d AP_Motors: added get_desired_spool_state() 2016-08-04 09:43:40 -07:00
murata b6c27b58a8 AC_Fence: magic number 4 changed to size of uint32_t 2016-08-04 15:26:18 +09:00
Pavel Kirienko 9b786559d4 Fixed missing definition error UAVCAN_IOCS_HARDPOINT_SET 2016-08-04 09:16:02 +10:00
Pavel Kirienko fccdcf50c1 EPM: fixed build 2016-08-04 09:16:02 +10:00
Pavel Kirienko 8af6af004d EPM: fixed parameter comments 2016-08-04 09:16:02 +10:00
Pavel Kirienko accf118e38 UAVCAN hardpoint control 2016-08-04 09:16:02 +10:00
Murilo Belluzzo 077e03678f Global: Adapt Stream class to be used with Ringbuffer 2016-08-03 01:44:02 -03:00
Murilo Belluzzo b856d26087 RingBuffer: ::set_size now returns true or false 2016-08-03 01:44:02 -03:00
Murilo Belluzzo f7f203efa9 RingBuffer: Add ::clear() method to discard the buffer content 
The same could be achieved with ::set_size(::get_size()), but was not
obvious and hurts code readability.
 2016-08-03 01:44:02 -03:00