| .. |
|
templates
|
Robustify RTPS bridge stream parsing.
|
2022-07-20 01:13:47 -04:00 |
|
tools
|
Docs are now in user guide and main (#19977)
|
2022-08-01 11:39:39 +10:00 |
|
CMakeLists.txt
|
arming checks: add health topic
|
2022-08-25 22:02:15 -04:00 |
|
action_request.msg
|
Use action_request to command RC VTOL transitions
|
2021-11-09 16:05:25 +01:00 |
|
actuator_armed.msg
|
Mavlink FLIGHT_INFORMATION fix arming time (ms -> us) and add takeoff time
|
2020-12-16 09:38:05 -05:00 |
|
actuator_controls.msg
|
use actuator_controls[8] for collective tilt for tiltrotor VTOL, instead of [4]
|
2022-05-03 15:11:21 +02:00 |
|
actuator_controls_status.msg
|
mc_rate: compute control energy and publish to status msg
|
2021-10-02 18:12:05 -04:00 |
|
actuator_motors.msg
|
esc_report: add actuator_function
|
2022-05-12 07:58:56 +02:00 |
|
actuator_outputs.msg
|
hitl,sitl,sih: use separate actuator_outputs_sim for SYS_CTRL_ALLOC==1
|
2022-02-25 08:30:58 +01:00 |
|
actuator_servos.msg
|
Whitespace cleanup.
|
2021-10-19 13:29:26 -04:00 |
|
actuator_servos_trim.msg
|
control_allocator: implement trim + slew rate limits configuration
|
2021-12-24 20:06:13 -05:00 |
|
actuator_test.msg
|
control_allocator: increase max num motors to 12
|
2022-05-10 08:57:39 +02:00 |
|
adc_report.msg
|
ADC: replace ioctl with uorb message (#14087)
|
2020-03-20 11:23:32 +01:00 |
|
airspeed.msg
|
Spelling errors (#19935)
|
2022-07-27 14:33:16 +10:00 |
|
airspeed_validated.msg
|
Commenting and formating fixes
|
2020-10-06 09:31:58 +02:00 |
|
airspeed_wind.msg
|
AirspeedSelector: add _CAS_scale_validated to airspeed_wind for logging
|
2021-10-22 17:00:35 +02:00 |
|
autotune_attitude_control_status.msg
|
mc atune: add multicopter attitude auto-tuner module
|
2021-10-02 18:12:05 -04:00 |
|
battery_status.msg
|
Spelling errors (#19935)
|
2022-07-27 14:33:16 +10:00 |
|
button_event.msg
|
safety and safety button: refactoring #19413
|
2022-04-05 07:57:37 +02:00 |
|
camera_capture.msg
|
…
|
|
|
camera_status.msg
|
mavlink: use dynamic camera comp id instead of hardcoded value
|
2021-07-31 12:41:49 -04:00 |
|
camera_trigger.msg
|
Fix camera trigger via MAVLink when camera capture feedback is enabled
|
2021-12-17 07:56:08 +01:00 |
|
cellular_status.msg
|
Spelling errors (#19935)
|
2022-07-27 14:33:16 +10:00 |
|
collision_constraints.msg
|
first push on supporting ROS2 Dashing and IDL 4.2
|
2019-10-04 16:56:03 +01:00 |
|
collision_report.msg
|
…
|
|
|
commander_state.msg
|
Added VTOL Takeoff navigation mode (#19027)
|
2022-02-15 14:56:57 +01:00 |
|
control_allocator_status.msg
|
control_allocator: remove failed motor from effectiveness
|
2022-05-12 07:58:56 +02:00 |
|
cpuload.msg
|
…
|
|
|
debug_array.msg
|
…
|
|
|
debug_key_value.msg
|
…
|
|
|
debug_value.msg
|
…
|
|
|
debug_vect.msg
|
…
|
|
|
differential_pressure.msg
|
Spelling errors (#19935)
|
2022-07-27 14:33:16 +10:00 |
|
distance_sensor.msg
|
Drivers: Distance Sensors: Add proper device IDs
|
2021-01-27 17:02:20 -05:00 |
|
ekf2_timestamps.msg
|
ekf2_timestamps.msg - make first line a complete sentence
|
2021-08-16 08:29:44 +02:00 |
|
esc_report.msg
|
esc_report: add actuator_function
|
2022-05-12 07:58:56 +02:00 |
|
esc_status.msg
|
msg: extend field definition in msg/esc_report (arming & failure states)
|
2020-04-03 09:16:43 +02:00 |
|
estimator_aid_source_1d.msg
|
ekf2: use estimator_aid_src for all yaw sources (mag, gnss, ev)
|
2022-07-29 11:20:48 -04:00 |
|
estimator_aid_source_2d.msg
|
ekf2: estimator aid source status (starting with fake position)
|
2022-05-23 16:21:49 -04:00 |
|
estimator_aid_source_3d.msg
|
ekf2: add AUX velocity aid src status
|
2022-07-29 12:02:31 -04:00 |
|
estimator_bias.msg
|
ekf2: publish GNSS, rng and EV height biases
|
2022-08-24 09:16:11 -04:00 |
|
estimator_event_flags.msg
|
Spelling errors (#19935)
|
2022-07-27 14:33:16 +10:00 |
|
estimator_gps_status.msg
|
ekf2: add new estimator_gps_status.msg
|
2022-02-21 08:58:59 -05:00 |
|
estimator_innovations.msg
|
Spelling errors (#19935)
|
2022-07-27 14:33:16 +10:00 |
|
estimator_selector_status.msg
|
Multi-EKF support (ekf2)
|
2020-10-27 10:56:11 -04:00 |
|
estimator_sensor_bias.msg
|
save significant IMU bias changes learned by the EKF
|
2021-11-07 15:34:27 -05:00 |
|
estimator_states.msg
|
estimator messages add explicit timestamp_sample
|
2020-09-04 10:48:26 -04:00 |
|
estimator_status.msg
|
ekf: add range finder "faulty" status
|
2022-02-11 10:57:45 -05:00 |
|
estimator_status_flags.msg
|
ekf2: use estimator_aid_src for all yaw sources (mag, gnss, ev)
|
2022-07-29 11:20:48 -04:00 |
|
event.msg
|
commander: rework arming checks to use the events interface
|
2022-08-25 22:02:15 -04:00 |
|
failure_detector_status.msg
|
failure_detector: add motor/ESC failure detection
|
2022-05-12 07:58:56 +02:00 |
|
follow_target.msg
|
New follow-me flight task
|
2022-06-16 16:14:57 -04:00 |
|
follow_target_estimator.msg
|
New follow-me flight task
|
2022-06-16 16:14:57 -04:00 |
|
follow_target_status.msg
|
FollowMe : Replace First order target position filter with Second order position and velocity filter
|
2022-06-16 16:14:57 -04:00 |
|
generator_status.msg
|
mavlink: handle receiving GENERATOR_STATUS
|
2020-09-25 11:36:58 -04:00 |
|
geofence_result.msg
|
Format whitespace and group checkall() methods together in geofence class.
|
2022-01-31 21:01:03 -05:00 |
|
gimbal_device_attitude_status.msg
|
mavlink: don't send gimbal_device_attitude_status
|
2022-02-07 19:21:15 -05:00 |
|
gimbal_device_information.msg
|
vmount/mavlink: update gimbal information message
|
2021-02-17 13:54:34 -05:00 |
|
gimbal_device_set_attitude.msg
|
Support for gimbal v2 protocol
|
2021-02-17 13:54:34 -05:00 |
|
gimbal_manager_information.msg
|
vmount/mavlink: update gimbal information message
|
2021-02-17 13:54:34 -05:00 |
|
gimbal_manager_set_attitude.msg
|
vmount/navigator/mavlink: gimbal v2 changes
|
2021-02-17 13:54:34 -05:00 |
|
gimbal_manager_set_manual_control.msg
|
vmount/navigator/mavlink: gimbal v2 changes
|
2021-02-17 13:54:34 -05:00 |
|
gimbal_manager_status.msg
|
vmount/navigator/mavlink: gimbal v2 changes
|
2021-02-17 13:54:34 -05:00 |
|
gps_dump.msg
|
Spelling errors (#19935)
|
2022-07-27 14:33:16 +10:00 |
|
gps_inject_data.msg
|
Support two RTCM links with the same corrections
|
2022-07-15 08:20:27 +02:00 |
|
health_report.msg
|
arming checks: add health topic
|
2022-08-25 22:02:15 -04:00 |
|
heater_status.msg
|
Create publish_status() method in the heater driver, add a status field to indicate if the temperature setpoint has been met within 2.5C, breakout update_params() method from the Heater::Run() method and simplify logic.
|
2021-04-16 08:09:51 -04:00 |
|
home_position.msg
|
Commander: set home position in air
|
2020-12-07 10:24:23 -05:00 |
|
hover_thrust_estimate.msg
|
mc_hover_thrust_estimator: validity flag and other small improvements/fixes
|
2020-08-03 10:30:52 -04:00 |
|
input_rc.msg
|
Spelling errors (#19935)
|
2022-07-27 14:33:16 +10:00 |
|
internal_combustion_engine_status.msg
|
Add internal combustion engine status uavcan bridge and mavlink EFI_STATUS stream
|
2021-07-30 22:31:43 -04:00 |
|
iridiumsbd_status.msg
|
Spelling errors (#19935)
|
2022-07-27 14:33:16 +10:00 |
|
irlock_report.msg
|
…
|
|
|
landing_gear.msg
|
…
|
|
|
landing_target_innovations.msg
|
…
|
|
|
landing_target_pose.msg
|
…
|
|
|
led_control.msg
|
Spelling errors (#19935)
|
2022-07-27 14:33:16 +10:00 |
|
log_message.msg
|
log_message increase queue depth 2->4
|
2021-01-09 11:04:32 -05:00 |
|
logger_status.msg
|
logger: record message gaps
|
2020-07-29 13:36:22 -04:00 |
|
mag_worker_data.msg
|
Add logging of mag calibration data (mag_worker_data)
|
2021-01-20 09:44:45 -05:00 |
|
magnetometer_bias_estimate.msg
|
magnetometer allow setting initial calibration from bias if available and stable
|
2021-12-01 20:24:56 -05:00 |
|
manual_control_setpoint.msg
|
Use backwards compatible manual_control_setpoint instead of manual_control_input
|
2021-11-09 16:05:25 +01:00 |
|
manual_control_switches.msg
|
helicopter: add switch to engage main motor
|
2022-09-07 08:00:26 +02:00 |
|
mavlink_log.msg
|
mavlink: STATUSTEXT directly use mavlink_log subscription
|
2020-11-17 19:47:06 -05:00 |
|
mavlink_tunnel.msg
|
Enable logging of mavlink tunnel messages
|
2022-01-26 11:10:43 -05:00 |
|
mission.msg
|
…
|
|
|
mission_result.msg
|
…
|
|
|
mount_orientation.msg
|
…
|
|
|
navigator_mission_item.msg
|
navigator: publish navigator mission item changes for logging
|
2020-10-13 12:12:03 -04:00 |
|
npfg_status.msg
|
integrate optional NPFG library for wind-aware fixed-wing guidance
|
2022-01-14 22:05:53 +01:00 |
|
obstacle_distance.msg
|
Collision Prevention: support multiple sensors and frames (#12883)
|
2019-09-06 08:38:56 +02:00 |
|
offboard_control_mode.msg
|
Enable offboard actuator setpoints
|
2021-11-07 15:38:42 -05:00 |
|
onboard_computer_status.msg
|
Add units on message comments
|
2019-10-27 11:47:10 +00:00 |
|
orb_test.msg
|
uORB: add bitset for faster orb_exists check and remove uORB::Subscription lazy subscribe hack/optimization
|
2020-03-11 09:06:33 -04:00 |
|
orb_test_large.msg
|
uORB: add bitset for faster orb_exists check and remove uORB::Subscription lazy subscribe hack/optimization
|
2020-03-11 09:06:33 -04:00 |
|
orb_test_medium.msg
|
fix: uORB topics lost messages when publications overflow
|
2020-10-19 08:52:55 +02:00 |
|
orbit_status.msg
|
Orbit: Add RC controlled yaw mode
|
2020-07-13 20:26:13 +02:00 |
|
parameter_update.msg
|
parameter_update.msg: add basic status info
|
2021-02-12 08:27:47 -05:00 |
|
ping.msg
|
…
|
|
|
position_controller_landing_status.msg
|
msg/position_controller_landing_status.msg: fix constant name conventions
|
2022-07-28 11:29:03 -04:00 |
|
position_controller_status.msg
|
position_controller_status message: added comments regarding NAN
|
2021-03-31 11:23:33 +02:00 |
|
position_setpoint.msg
|
added comment for cruising throttle only affecting rover
|
2022-07-12 09:07:20 +02:00 |
|
position_setpoint_triplet.msg
|
…
|
|
|
power_button_state.msg
|
…
|
|
|
power_monitor.msg
|
…
|
|
|
pps_capture.msg
|
Remove PPS GPIO interrupt when the rate is higher than 20Hz
|
2022-07-04 11:32:33 +02:00 |
|
pwm_input.msg
|
PWM automatic trigger system (ATS) for parachutes (#13726)
|
2020-01-06 20:14:06 -05:00 |
|
px4io_status.msg
|
px4io: replace safety_off state with safety button event (#19558)
|
2022-06-01 13:15:13 -04:00 |
|
radio_status.msg
|
…
|
|
|
rate_ctrl_status.msg
|
FW attitue controller: fix publishing of rate controller status
|
2022-08-19 09:40:48 +02:00 |
|
rc_channels.msg
|
helicopter: add switch to engage main motor
|
2022-09-07 08:00:26 +02:00 |
|
rc_parameter_map.msg
|
…
|
|
|
rpm.msg
|
Spelling errors (#19935)
|
2022-07-27 14:33:16 +10:00 |
|
rtl_time_estimate.msg
|
Compute RTL time and react if lower than flight time
|
2021-11-24 14:10:24 +01:00 |
|
satellite_info.msg
|
Add MavlinkStreamGPSStatus status class stream via GPS_STATUS.hpp and add PRN code to satellite_info.msg.
|
2020-10-14 08:26:42 +02:00 |
|
sensor_accel.msg
|
sensors/vehicle_imu: vehicle_imu_status include accel/gyro full raw FIFO sample rate
|
2021-02-24 08:13:53 -05:00 |
|
sensor_accel_fifo.msg
|
rotate accel/gyro FIFO before publish and fix angular velocity filter resets
|
2021-03-22 12:01:12 -04:00 |
|
sensor_baro.msg
|
sensors: add baro calibration and cleanup
|
2022-03-26 16:08:41 -04:00 |
|
sensor_combined.msg
|
Add gyro clipping to mirror accel clipping monitoring instances.
|
2022-05-18 21:16:05 -04:00 |
|
sensor_correction.msg
|
sensor calibration: save temperature at calibration time for monitoring
|
2021-08-15 11:19:24 -04:00 |
|
sensor_gnss_relative.msg
|
drives/gps: add new sensor_gnsss_relative msg
|
2022-03-29 07:59:41 +02:00 |
|
sensor_gps.msg
|
Support two RTCM links with the same corrections
|
2022-07-15 08:20:27 +02:00 |
|
sensor_gyro.msg
|
Add gyro clipping to mirror accel clipping monitoring instances.
|
2022-05-18 21:16:05 -04:00 |
|
sensor_gyro_fft.msg
|
gyro_fft: change default length 1024 -> 512 to decrease latency
|
2021-07-06 21:54:18 -04:00 |
|
sensor_gyro_fifo.msg
|
rotate accel/gyro FIFO before publish and fix angular velocity filter resets
|
2021-03-22 12:01:12 -04:00 |
|
sensor_hygrometer.msg
|
Spelling errors (#19935)
|
2022-07-27 14:33:16 +10:00 |
|
sensor_mag.msg
|
sensors (accel/gyro/mag) determine if external with device id
|
2022-01-10 10:31:07 -05:00 |
|
sensor_optical_flow.msg
|
optical flow sensor pipeline overhaul
|
2022-06-20 20:56:56 -04:00 |
|
sensor_preflight_mag.msg
|
sensors: move mag aggregation to new VehicleMagnetometer WorkItem
|
2020-08-21 10:12:13 -04:00 |
|
sensor_selection.msg
|
sensors: move mag aggregation to new VehicleMagnetometer WorkItem
|
2020-08-21 10:12:13 -04:00 |
|
sensors_status.msg
|
sensors: add baro calibration and cleanup
|
2022-03-26 16:08:41 -04:00 |
|
sensors_status_imu.msg
|
sensors: add accel/gyro current priority to sensors_status_imu
|
2021-07-30 21:20:01 -04:00 |
|
system_power.msg
|
adc: add support for multiple sensor voltage channels
|
2021-01-15 10:57:20 -05:00 |
|
takeoff_status.msg
|
Spelling errors (#19935)
|
2022-07-27 14:33:16 +10:00 |
|
task_stack_info.msg
|
load_mon: update orb_publish to uORB::Publication<>
|
2019-09-02 20:41:34 -04:00 |
|
tecs_status.msg
|
log tecs trim throttle
|
2022-07-12 09:07:20 +02:00 |
|
telemetry_status.msg
|
mavlink increase HEARTBEAT timeout 1.5->2.5s
|
2022-02-18 10:16:20 -05:00 |
|
test_motor.msg
|
commander: add support for DO_MOTOR_TEST
|
2019-10-24 09:27:29 +02:00 |
|
timesync.msg
|
timesync: remove system ID field from the timesync message
|
2021-08-12 08:44:53 +02:00 |
|
timesync_status.msg
|
microRTPS: agent: publish timesync status
|
2021-08-12 08:44:53 +02:00 |
|
trajectory_bezier.msg
|
Add documenation to uORB message
|
2020-03-09 09:51:49 +01:00 |
|
trajectory_setpoint.msg
|
trajectory_setpoint: correct comment typo "kinematically"
|
2022-05-12 17:19:48 +02:00 |
|
trajectory_waypoint.msg
|
add point type (mavlink command associated with wp) in Obstacle Avoidance interface
|
2019-08-05 16:05:40 +02:00 |
|
transponder_report.msg
|
fix: uORB topics lost messages when publications overflow
|
2020-10-19 08:52:55 +02:00 |
|
tune_control.msg
|
Reduce Beeepr Default volume : 40 -> 20, since it's too loud for TAP_ESC devices from Yuneec (#19311)
|
2022-03-11 10:27:57 +01:00 |
|
uavcan_parameter_request.msg
|
fix: uORB topics lost messages when publications overflow
|
2020-10-19 08:52:55 +02:00 |
|
uavcan_parameter_value.msg
|
…
|
|
|
ulog_stream.msg
|
fix: uORB topics lost messages when publications overflow
|
2020-10-19 08:52:55 +02:00 |
|
ulog_stream_ack.msg
|
ulog stream msgs: rename 'sequence' fields as they are protected names in fastrtpsgen
|
2019-10-14 16:37:17 +01:00 |
|
uwb_distance.msg
|
Spelling errors (#19935)
|
2022-07-27 14:33:16 +10:00 |
|
uwb_grid.msg
|
Support for NXP UWB position sensor
|
2022-04-04 17:26:52 +02:00 |
|
vehicle_acceleration.msg
|
Clarification of coordinate systems for sensors_* and vehicle_* messages (#16339)
|
2020-12-15 09:18:05 +01:00 |
|
vehicle_air_data.msg
|
sensors: add baro calibration and cleanup
|
2022-03-26 16:08:41 -04:00 |
|
vehicle_angular_acceleration.msg
|
Clarification of coordinate systems for sensors_* and vehicle_* messages (#16339)
|
2020-12-15 09:18:05 +01:00 |
|
vehicle_angular_acceleration_setpoint.msg
|
initial control allocation support
|
2021-01-18 11:25:37 -05:00 |
|
vehicle_angular_velocity.msg
|
Clarification of coordinate systems for sensors_* and vehicle_* messages (#16339)
|
2020-12-15 09:18:05 +01:00 |
|
vehicle_attitude.msg
|
Add gyro clipping to mirror accel clipping monitoring instances.
|
2022-05-18 21:16:05 -04:00 |
|
vehicle_attitude_setpoint.msg
|
fixed-wing: update rate controller integrator handling
|
2022-08-19 09:40:48 +02:00 |
|
vehicle_command.msg
|
commander: handle VEHICLE_CMD_RUN_PREARM_CHECKS
|
2022-08-25 22:02:15 -04:00 |
|
vehicle_command_ack.msg
|
Move Vehicle Command Result Enum defs to Vehicle Command Ack (#19729)
|
2022-07-07 16:15:11 +02:00 |
|
vehicle_constraints.msg
|
vehicle_constraints: remove deprecated speed_xy constraint
|
2021-11-09 21:47:06 -05:00 |
|
vehicle_control_mode.msg
|
px4io: moving mixing to FMU side
|
2021-09-25 19:15:05 -04:00 |
|
vehicle_global_position.msg
|
Multi-EKF support (ekf2)
|
2020-10-27 10:56:11 -04:00 |
|
vehicle_imu.msg
|
Add gyro clipping to mirror accel clipping monitoring instances.
|
2022-05-18 21:16:05 -04:00 |
|
vehicle_imu_status.msg
|
Add gyro clipping to mirror accel clipping monitoring instances.
|
2022-05-18 21:16:05 -04:00 |
|
vehicle_land_detected.msg
|
move vehicle at rest detection ekf2 -> land_detector
|
2022-02-01 17:50:19 -05:00 |
|
vehicle_local_position.msg
|
vehicle_local_position: fixed comment
|
2022-08-02 15:29:25 +02:00 |
|
vehicle_local_position_setpoint.msg
|
vehicle_local_position_setpoint: reorder fields for clarity
|
2022-05-12 17:19:48 +02:00 |
|
vehicle_magnetometer.msg
|
Clarification of coordinate systems for sensors_* and vehicle_* messages (#16339)
|
2020-12-15 09:18:05 +01:00 |
|
vehicle_odometry.msg
|
msg/vehicle_odometry.msg: simplify covariance handling and update all usage (#19966)
|
2022-08-04 12:55:21 -04:00 |
|
vehicle_optical_flow.msg
|
optical flow sensor pipeline overhaul
|
2022-06-20 20:56:56 -04:00 |
|
vehicle_optical_flow_vel.msg
|
optical flow sensor pipeline overhaul
|
2022-06-20 20:56:56 -04:00 |
|
vehicle_rates_setpoint.msg
|
vehicle_rates_setpoint: log wheel controller yaw rate on common yaw rate channel
|
2022-07-18 10:49:27 -04:00 |
|
vehicle_roi.msg
|
…
|
|
|
vehicle_status.msg
|
commander: move battery handling into arming checks
|
2022-09-01 17:07:23 -04:00 |
|
vehicle_status_flags.msg
|
commander: move esc checks to arming check
|
2022-09-01 17:07:23 -04:00 |
|
vehicle_thrust_setpoint.msg
|
vehicle_{thrust,torque}_setpoint.msg: fix comment
|
2022-04-28 19:51:28 -04:00 |
|
vehicle_torque_setpoint.msg
|
vehicle_{thrust,torque}_setpoint.msg: fix comment
|
2022-04-28 19:51:28 -04:00 |
|
vehicle_trajectory_bezier.msg
|
Add uORB messages for bezier curve trajectories
|
2020-03-09 09:51:49 +01:00 |
|
vehicle_trajectory_waypoint.msg
|
…
|
|
|
vtol_vehicle_status.msg
|
VTOL: remove some unsued variables
|
2022-05-18 10:01:04 +02:00 |
|
wheel_encoders.msg
|
Changed wheel encoder publication to multi-instance
|
2019-08-05 02:45:33 -07:00 |
|
wind.msg
|
select single system-wide wind estimate message (current best)
|
2021-02-20 13:15:01 -05:00 |
|
yaw_estimator_status.msg
|
ekf2: yaw estimator add yaw_composite_valid boolean
|
2022-06-01 13:16:06 -04:00 |
7e75b497ae