dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
39,623 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

39623 Commits

Author SHA1 Message Date
David Sidrane eac92ec671 imxrt:ADC fix timeouts 2022-01-03 06:02:19 -08:00
Jaeyoung-Lim bdec85fdd0 Disable local vehicle setpoints while in transition 
This commit adds disabling vehicle setpoints while in transition
 2022-01-03 11:09:06 +01:00
Jaeyoung-Lim 4127dfa791 Log vehicle local position setpoints 
This commit enables the local position setpoints to be logged by publishing vehicle_local_position_setpoint
 2022-01-03 11:09:06 +01:00
Jaeyoung Lim 52418f13b0 Use groundspeed for navigate heading 2022-01-03 10:52:34 +01:00
Jaeyoung-Lim e66e82228f Add support for offboard velocity setpoints for fixedwing vehicles 
This commit adds a velocity controller which the setpoint can be passed using offboard setpoints
 2022-01-03 10:52:34 +01:00
Daniel Agar 75bb2f8dd2
Jenkins: hardware temporarily tolerate sd_bench failures on px4_fmu-v5_debug 2022-01-02 14:47:52 -05:00
Daniel Agar 673d4544d1 parameters: verify param backup after export 2022-01-02 10:46:34 -05:00
Daniel Agar 8e26b33009 tinybson: file write error add more detail 2022-01-02 10:46:34 -05:00
Daniel Agar 80ef6e19df tinybson: explicitly append int32 or int64 2022-01-02 10:46:34 -05:00
Daniel Agar 9cbb5c9920 parameters: fix export shutdown locking 
- in NuttX bchlib keeps a sector sized buffer that might not be written
out to RAMTRON until the file is closed
 2022-01-02 10:46:34 -05:00
Daniel Agar 2153710917
Tools/HIL/monitor_firmware_upload.py don't fail on any ERROR 
- on first boot we only care that it completes (gets to nsh prompt)
 2022-01-02 10:05:30 -05:00
Daniel Agar c421bff73c Tools/HIL: use pyserial spy:// to log all serial traffic and dump on failure 2022-01-01 22:25:29 -05:00
Daniel Agar 7df1721d32 ROMFS: rcS disable simplistic SD I/O test 
- this was added when trying to identify SD card issues at boot and
trigger a format, but didn't provide any value
 2022-01-01 18:43:27 -05:00
Daniel Agar f76aa0e772 cmake: NuttX ARMV7M_STACKCHECK skip ekf2 
- px4_fmu-v5_stackcheck switch from icm20689 -> bmi055 (lower rate)
 - this is to make performance tolerable
 2022-01-01 18:43:27 -05:00
Daniel Agar e9283d90cc systemcmds/netman: fix code style 2022-01-01 18:40:47 -05:00
Daniel Agar 0029317e55
Jenkins: hardware additional reboots no longer required 2022-01-01 14:06:05 -05:00
Daniel Agar 439ad7daea
Jenkins: hardware disable calib_delay (too slow) and manual SD format 2022-01-01 12:10:28 -05:00
Daniel Agar 501474993e Tools/HIL: default to USB UART if available 2022-01-01 10:49:30 -05:00
Daniel Agar 77b65ee564
boards: px4_fmu-v5_debug disable stack check 
- this is redundant with px4_fmu-v5_stackcheck
 2021-12-31 19:34:18 -05:00
Daniel Agar 247b975675 Tools/HIL: disable XON/XOFF, consistent timeouts, proper input buffer clear 2021-12-31 19:28:40 -05:00
Daniel Agar 03371f8522 NuttX with bch flush backport 2021-12-31 10:59:56 -08:00
David Sidrane db159a43cc test_dataman:Set SEM_PRIO_NONE on all semaphores 2021-12-31 10:27:24 -05:00
Daniel Agar 1b6700592b parameters: require valid BSON document size 2021-12-30 16:36:23 -05:00
Daniel Agar 3514458f42 Tools/HIL/test_airframes.sh: dump all parameter storage after bootup to verify contents 2021-12-30 12:43:00 -05:00
Daniel Agar b06215d038
Tools/HIL/test_airframes.sh: run param dump after save to verify BSON 2021-12-30 11:11:14 -05:00
PX4 BuildBot 5fc7e551ab Update submodule mavlink to latest Wed Dec 29 12:38:13 UTC 2021 
- mavlink in PX4/Firmware (395eeb440a2ca7503591f872d4f733fcd9867218): bfaf605bd6
    - mavlink current upstream: 4bc0de9c38
    - Changes: bfaf605bd6...4bc0de9c38

    4bc0de9c 2021-12-27 olliw42 - Component Information Basics: add camera cap flag (#1752)
8035ad4d 2021-12-27 Hamish Willee - GIMBAL_DEVICE_FLAGS_NEUTRAL - note that this can be any angle (#1758)
 2021-12-29 17:16:49 -05:00
Daniel Agar 6706d9b434 Jenkins: always fully clean git workspace 2021-12-29 17:14:11 -05:00
Daniel Agar 6d0339ba0c I2CSPIDriverBase: sensor start failure ERROR if internal, WARN if external 2021-12-28 11:05:35 -05:00
Daniel Agar 990d7c159d pwm_out: cleanup and prep for linux compatibility 2021-12-28 11:04:00 -05:00
Daniel Agar 10f4a2e91f boards: omnibus_f4sd_default disable systemcmds to save flash 2021-12-27 12:19:55 -05:00
Daniel Agar 3ef9c2d16c boards: holybro_kakutef7_default disable modules/gyro_calibration to save flash 2021-12-27 12:19:55 -05:00
FengShun 8f8719d33b cmake: use add_definitions instead of add_compile_definitions 
Using make tests in docker will fail, because the current basic image used by px4io/px4-dev-simulation-bionic is ubuntu18.04, the default version of cmake is 3.10, and the add_compile_definitions command is only available in cmake 3.12+(ubuntu 20.04).
 2021-12-27 12:19:31 -05:00
FengShun 65e976bbc2 docker: update px4-dev-simulation-bionic container versions to 2021-12-11 
The current docker image will cause "make tests" to fail: "kconfiglib is not installed or not in PATH"
 2021-12-27 12:19:31 -05:00
Daniel Agar d94767ef88 cmake: NuttX use cygwin friendly path for linker script 2021-12-27 12:19:12 -05:00
honglang 17a99bc827 mavlink: add HYGROMETER_SENSOR stream 2021-12-27 12:13:09 -05:00
honglang 983867f9af uavcan: support uavcan hygrometer 2021-12-27 12:13:09 -05:00
honglang b60e59d9be msg: new sensor_hygrometer msg 2021-12-27 12:13:09 -05:00
Daniel Agar 3f17acdcc9 boards: mro_ctrl-zerl-h7-oem pin fixes (sync with mro_ctrl-zero-h7) 2021-12-27 09:25:21 -05:00
Daniel Agar 0f4e1dd9f9 boards: mro ctrl-zero-h7 pin fixes 2021-12-27 09:25:21 -05:00
Daniel Agar 236794235a parameters: export empty BSON document even if there are no parameters to save 
- otherwise a 'param reset_all' won't be saved until a parameter is changed
 2021-12-27 09:17:00 -05:00
Daniel Agar 33d7b42040 parameters: import quietly retry if there's no data (as a precuation) 2021-12-27 09:17:00 -05:00
Daniel Agar 20d3e6f4e1 parameters: add simple BSON verification pass after export 2021-12-27 09:17:00 -05:00
Beat Küng 72065c3d71 fix protocol_splitter: remove timeout, drop buffer if too full instead 
The existing implementation had a flaw: when the buffer was getting full,
mavlink started to busy-loop, as the uart has data (poll returns immediately)
but no new data was read from the uart due to the buffer being full.
As rtps is running at lower prio, it never got the chance to read again,
making the problem even worse.
After 1s the timeout triggered and the buffer was cleared, so it recovered.

Instead of allowing for CPU spikes, we now immediately clear the buffer
(only as much as we have to), ensuring that new data is read from the uart.
 2021-12-24 20:28:43 -05:00
Rui Miguel Carvalho 542ee86bc9
landing_target_estimator: custom irlock frame params (#18884) 
Signed-off-by: ruimscarvalho98 <ruimsc98@gmail.com>
 2021-12-24 20:20:35 -05:00
Silvan Fuhrer 28e01c3510 FW Position controller: make loiter switching logic robust against pos_sp with loiter_rad=0 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-12-24 20:17:15 -05:00
Daniel Agar 98d706772e boards: px4_fmu-v2_rover disable events module to save flash 2021-12-24 20:06:13 -05:00
Beat Küng d202bf9631 control_allocator: add scope to reduce stack usage by 256B 2021-12-24 20:06:13 -05:00
Silvan Fuhrer 48be55dec8 Tiltrotor: disable tilt/thrust compensation when dynamic allocation is enabled 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-12-24 20:06:13 -05:00
Silvan Fuhrer 31d7328f4d Tailsitter: invert roll (make it NED-correct) for filling vehicle_torque_setpoint 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-12-24 20:06:13 -05:00
Silvan Fuhrer 1ad66e606b ControlAllocation: introduce convention for control surface deflection sign 
- horizontal control surfaces: up=positive deflection
- vertical control surfaces (rudder): right=positive deflection
- mixed (V-Tail): up=positive deflection

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-12-24 20:06:13 -05:00