dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
41,326 Commits 514 Branches 136 Tags 601 MiB
Commit Graph

157 Commits

Author SHA1 Message Date
chris1seto 77fdce9f3c
drivers/rc/crsf_rc: update standalone driver for CRSF and direct support for lq/rssi (#20084) 
Co-authored-by: Chris Seto <chris1seto@gmail.com>
 2022-09-23 19:19:25 -04:00
Daniel Agar d3312f955f delete systemcmds/pwm 2022-09-09 09:14:09 -04:00
Daniel Agar 5dd1e5a018 delete systemcmds/mixer 2022-09-09 09:14:09 -04:00
Igor Mišić 3463b725a5 px4_manifest: fix px4_mft_s to accept multiple manifests 2022-07-05 09:29:26 +02:00
Daniel Agar c7cec4252c sensors: add CONFIG_SENSORS_VEHICLE_AIRSPEED for airspeed/differential pressure 
- disable CONFIG_SENSORS_VEHICLE_AIRSPEED on boards only used for multicopter
 2022-06-17 19:31:45 -04:00
Igor Mišić 5dc3fecac0 boards/bitcraze: add PWM_SERVO_STOP define 2022-06-16 08:09:00 +02:00
Daniel Agar 5b6e5a0968 boards: NuttX update all boards to preallocated sem holder list 
- CONFIG_SEM_PREALLOCHOLDERS=32
 - CONFIG_SEM_NNESTPRIO=16 (default)
 2022-05-31 01:41:07 -07:00
Daniel Agar 3a741cb9c9
boards: bitcrazy_crazyflie disable gyro_fft to save flash 2022-02-06 16:53:13 -05:00
Beat Küng 0818bb4be0 bitcraze/crazyflie{,21}: disable modules to reduce flash 2021-12-24 20:06:13 -05:00
Julian Oes 9686c81f7d boards: enable flow control on CDCACM 
This enables flow control on CDCACM for the NuttX boards which fixes a
problem where HITL would stall.

The stall could happen if the hardware would be a bit too slow in
keeping up with the incoming messages. Often, this happened on arming
because the logger would take some time to log all parameters right at
the beginning.

The stall would then not recover due to NuttX bug where the rx interrupt
would not be restored correctly and instead only a slower watchdog would
release the next read. This watchdog takes 200ms which means it's hard
to impossible to get out of the situation without restarting sim and/or
PX4.  For more information about the issue, see:
apache/incubator-nuttx#3633

As a workaround, until that bug is fixed, and because it makes sense
anyway, I propose to enable FLOWCONTROL for the serial via USB.
 2021-12-21 08:01:38 +01:00
Daniel Agar 8185e2a384 boards: board_app_initialize() don't return early on failure 
- depending on the situation we're more likely to get actionable user
feedback by allowing boot to complete rather than silently failing
 2021-12-09 20:41:54 -05:00
Matthias Grob fdc40880d0 battery: separate out publishing from updating 
to allow smart battery drivers to use the battery class and
filling in additional information in case it makes sense.
 2021-12-07 21:06:51 +01:00
Matthias Grob e70d70468a battery: pass voltage and current by setter 2021-12-07 21:06:51 +01:00
Matthias Grob 39641494da battery: pass connected flag in by setter 2021-12-07 21:06:51 +01:00
Matthias Grob 38d23f5345 battery: pass priority in by setter 2021-12-07 21:06:51 +01:00
Matthias Grob f9fc9a9af6 battery: pass source in by constructor 2021-12-07 21:06:51 +01:00
Matthias Grob b965923c08 battery: fetch throttle value inside of class 2021-12-07 21:06:51 +01:00
Daniel Agar 4bf1b46e47 boards: free up flash on crazyflie and omnibus 2021-12-06 09:37:08 -05:00
Beat Küng 4c03def6e9 boards: add CONTROL_ALLOCATOR + ACTUATOR_TEST 2021-11-23 12:40:22 -05:00
Daniel Agar f5d9b01f5c
NuttX build in place 
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
    - slightly faster skipping necessary copying (depending on system)
    - allows debugging in place
    - easier to work directly in NuttX following official documentation
    - simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
 - the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
 - also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
 2021-11-15 18:47:38 -05:00
Daniel Agar 2d816e0b3e [WIP] manual_control selector hacks 2021-11-09 16:05:25 +01:00
Peter van der Perk 454c907b7d Kconfig backport #18327 mag_bias 2021-10-07 10:09:01 -04:00
Peter van der Perk 36191e649a Kconfig backport #18289 and other flash size fixes 2021-10-07 10:09:01 -04:00
Peter van der Perk f7803fb686 [Kconfig] Bloaty 2nd pass 2021-10-07 10:09:01 -04:00
Peter van der Perk 33fd65e5fe [Kconfig] Fix regressions found by bloaty and cleanup unused cmake 2021-10-07 10:09:01 -04:00
Peter van der Perk b3e799e277 [Kconfig] Add all distance sensors 2021-10-07 10:09:01 -04:00
Peter van der Perk 21e6547ac7 [Kconfig] Toolchain & platform fixes, SITL still broken 2021-10-07 10:09:01 -04:00
Peter van der Perk 0400c24af5 [Kconfig] 17-08-21 rebase fixes 2021-10-07 10:09:01 -04:00
Peter van der Perk 6af0477733 [Kconfig] Gnerate px4board from old cmake 
Added make updateconfig to update all config when default's have changed
Added cmake to px4board conversion script
 2021-10-07 10:09:01 -04:00
Daniel Agar bbfaa4694c
boards: cleanup serial RX DMA hrt_call_every 
- remove ts_to_abstime dependency
 2021-10-06 14:39:59 -04:00
Daniel Agar c271a9e3e6 add sd_stress to all boards and run on test rack 2021-10-04 17:38:31 -04:00
Daniel Agar 6d78054f50
mavlink USB auto start/stop on boards with VBUS 
- no longer start sercon or mavlink usb by default
 - on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns
 - the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected
 - skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards
 2021-10-03 15:32:54 -04:00
bresch 1443f773da mbe: add module to targets 2021-10-02 21:25:21 -04:00
bresch 5874b1f87c mc atune: add module to all targets 
- adjust flash constrianed targets to fit
 2021-10-02 18:12:05 -04:00
Daniel Agar 089c962d92 px4io: moving mixing to FMU side 
Using mixers on the IO side had a remote benefit of being able to
override all control surfaces with a radio remote on a fixed wing.
This ended up not being used that much and since the original design
10 years ago (2011) we have been able to convince ourselves that the
overall system stability is at a level where this marginal benefit,
which is not present on multicopters, is not worth the hazzle.

Co-authored-by: Beat Küng <beat-kueng@gmx.net>
Co-authored-by: Daniel Agar <daniel@agar.ca>
 2021-09-25 19:15:05 -04:00
Beat Küng a8e75d174c boards: remove BOARD_HAS_PWM and use DIRECT_PWM_OUTPUT_CHANNELS 2021-09-08 16:10:24 -04:00
Daniel Agar 40e5477edb NuttX boards fix mkfatfs and rcS logic 2021-09-01 15:16:00 -04:00
David Sidrane cc6d15b4fd bitcraze_crazyflie: Update nsh defconfig NuttX 10.1.0+ 2021-08-13 14:22:00 -04:00
David Sidrane 655a10ffdd bitcraze_crazyflie21: Update nsh defconfig NuttX 10.1.0+ 2021-08-13 14:22:00 -04:00
Beat Küng 0e1f3a2d62 px4_add_board: infer VENDOR, MODEL & LABEL from cmake file name 2021-08-03 10:36:25 +02:00
Daniel Agar 65745a3676 purge broken qurt support and atlflight boards 2021-07-16 08:53:36 -04:00
Matthias Grob a99ddd0845 battery: don't reset on every loop iteration 2021-07-01 14:24:38 +02:00
David Sidrane 05bdef867d Track NuttX syslog change 2021-06-16 17:07:47 +02:00
David Sidrane 93c37e4e0c syslink:Use inttypes 2021-06-16 17:07:47 +02:00
Daniel Agar 6874e9fba0 boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default 
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
 2021-03-30 09:23:43 -04:00
Daniel Agar f8eaa6e46b ROMFS handle bl_update generically 
- include all available legacy bootloaders
 2021-03-11 00:38:18 +01:00
Daniel Agar 4d288512b5 add board architecture specific init defaults 2021-03-09 19:59:41 +01:00
Daniel Agar 19de1e57e3 gyro_fft promote to modules and include on all boards 2021-03-05 10:56:54 -05:00
Daniel Agar ab0d0fd0be
uORB move to PX4 platform layer 2021-02-17 11:25:56 -05:00
Daniel Agar a257120e8d boards: use new param default mechanism 2021-02-12 08:27:47 -05:00