- accel & gyro FIFOs enabled
- FIFO watermark on data ready interrupt
- sensor side filtering completely disabled
- gyro now respects `IMU_GYRO_RATEMAX` (up to 2 kHz)
- saves a few % cpu (at default rate)
- perform full sensor signal path reset and wait for max time (100 ms)
- issue full sensor reset on any error
- always read FIFO count before transfersj
- only allocate drdy perf counter if GPIO is available
Todate I have not fould a way to differentiate a 74 from a 75.
as all parts map to Device ID 0x450: STM32H742, STM32H743/753
and STM32H750.
One the CPU is fully differentiate in Nuttx, this can be a
#ifdef.
- only record start time on first run rather than init
- increase name length
- round average interval to nearest microsecond
- basic formatting consistency (google style guide)
- always check with state machine before reboot/shutdown
- respect BOARD_HAS_POWER_CONTROL (shutdown from command, low battery, power button)
- px4_shutdown_request add optional delay and always execute from HPWORK
- px4_shutdown_request split out px4_reboot_request
This adds a sitl target and aiframe configs for the r1_rover, which is a differential rover example for SITL rover. The model is based on the aion robotics r1 rover
- nuttx in PX4/Firmware (2c938af28051250f90baf7c411179b9b01dc5d0c): 7fffab1610
- nuttx current upstream: 66b4f2c4f2
- Changes: 7fffab1610...66b4f2c4f2
66b4f2c4f2 2020-04-21 Peter van der Perk - [Backport] Added S32K1XX progmem driver to use the FlexNVM memory
1b3fc1c668 2020-04-10 Peter van der Perk - Added net_trylock so we can call can_input while being in a interrupt handler
- increase stack sizes to run cleanly under stackcheck
- this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
- remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
When this triggered it actually just kept printing
"floating point exception" and never recovered. By removing this we can
at least catch it with a core dump, in CI as well as locally.
- NuttX-apps in PX4/Firmware (cf2b0a47ce64ea50e9539689b1b704cd536b9558): 91b6ad6a0d
- NuttX-apps current upstream: 95e105548a
- Changes: 91b6ad6a0d...95e105548a
95e10554 2020-03-30 Peter van der Perk - [Backport] Add CONFIG_NET_CAN support to netinit.c
e17eeb31 2020-03-28 Peter van der Perk - [Backport] netutils SocketCAN suport & candump, cansend tool
- nuttx in PX4/Firmware (3cee71918ad35d155fcdd5f32770dad98619eb84): 09f0aee352
- nuttx current upstream: ec417d7466
- Changes: 09f0aee352...ec417d7466
ec417d7466 2020-04-06 Peter van der Perk - [Backport] FMUK66 SocketCAN driver & Configurable Bitrate support
a3132cf3b7 2020-03-30 Peter van der Perk - [Backport] SocketCAN support
Ubuntu 20.04 and latest Cygwin come with no Python 2 and no link
from python to python3. To not mess with the system we detect
python3 for seamless support.
Daniel Agar
TSC21
CUAVcaijie
David Sidrane
Julian Oes
Matthias Grob
kritz
JaeyoungLim
Jakub Kákona
PX4 BuildBot
Beat Küng
JaeyoungLim
mcsauder
Jacob Dahl
AlexKlimaj
Peter van der Perk
Peter van der Perk
Hyon Lim