Peter van der Perk
ed5fee1a72
Backport #18311 mc atune
2021-10-07 10:09:01 -04:00
Peter van der Perk
454c907b7d
Kconfig backport #18327 mag_bias
2021-10-07 10:09:01 -04:00
Peter van der Perk
36191e649a
Kconfig backport #18289 and other flash size fixes
2021-10-07 10:09:01 -04:00
Peter van der Perk
33fd65e5fe
[Kconfig] Fix regressions found by bloaty and cleanup unused cmake
2021-10-07 10:09:01 -04:00
Peter van der Perk
b3e799e277
[Kconfig] Add all distance sensors
2021-10-07 10:09:01 -04:00
Peter van der Perk
21e6547ac7
[Kconfig] Toolchain & platform fixes, SITL still broken
2021-10-07 10:09:01 -04:00
Peter van der Perk
6af0477733
[Kconfig] Gnerate px4board from old cmake
...
Added make updateconfig to update all config when default's have changed
Added cmake to px4board conversion script
2021-10-07 10:09:01 -04:00
Daniel Agar
c271a9e3e6
add sd_stress to all boards and run on test rack
2021-10-04 17:38:31 -04:00
Daniel Agar
6d78054f50
mavlink USB auto start/stop on boards with VBUS
...
- no longer start sercon or mavlink usb by default
- on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns
- the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected
- skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards
2021-10-03 15:32:54 -04:00
bresch
1443f773da
mbe: add module to targets
2021-10-02 21:25:21 -04:00
bresch
5874b1f87c
mc atune: add module to all targets
...
- adjust flash constrianed targets to fit
2021-10-02 18:12:05 -04:00
Beat Küng
c5c80e31b6
boards: remove DIRECT_INPUT_TIMER_CHANNELS from board_config.h
2021-09-08 16:10:24 -04:00
Beat Küng
a8e75d174c
boards: remove BOARD_HAS_PWM and use DIRECT_PWM_OUTPUT_CHANNELS
2021-09-08 16:10:24 -04:00
Daniel Agar
40e5477edb
NuttX boards fix mkfatfs and rcS logic
2021-09-01 15:16:00 -04:00
Lorenz Meier
965f11e923
MRO: Set up MPU after boot to app
...
This is needed in case the bootloader configured the MPU, which could interfere with the app as the bootloader memory map / configuration is different.
2021-09-01 08:53:05 +02:00
David Sidrane
bb913ae11a
system_load:Track Dynamic PID hash
2021-08-13 14:22:00 -04:00
David Sidrane
49c85e7713
mro_ctrl-zero-h7: Update bootloader defconfig NuttX 10.1.0+
2021-08-13 14:22:00 -04:00
David Sidrane
0d47f1a3cb
mro_ctrl-zero-h7: Update nsh defconfig NuttX 10.1.0+
2021-08-13 14:22:00 -04:00
David Sidrane
ec61512cdf
NuttX inits null console
2021-08-13 14:22:00 -04:00
Beat Küng
0e1f3a2d62
px4_add_board: infer VENDOR, MODEL & LABEL from cmake file name
2021-08-03 10:36:25 +02:00
Daniel Agar
e9f84ba708
keep minimal legacy battery parameters for older QGC usability
...
- BAT_V_EMPTY, BAT_V_CHARGED, BAT_V_LOAD_DROP, BAT_N_CELLS
2021-07-23 15:07:53 -04:00
David Sidrane
05bdef867d
Track NuttX syslog change
2021-06-16 17:07:47 +02:00
echoG
6bc09138c1
Adding BatMon smart battery as a module and refactoring SMBUS based SBS 1.1 spec to a library
2021-06-09 12:17:45 -04:00
Daniel Agar
5f775b508f
boards: enable CONFIG_OTG_ID_GPIO_DISABLE on all F7/H7
2021-06-01 15:19:15 -04:00
David Sidrane
32e92ba817
Revert:Pull downs - bad levels cause motor spins
2021-06-01 15:18:47 -04:00
Jukka Laitinen
071eaef884
Adjust paths to bootloader include files for boards
...
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
2021-05-26 12:57:37 -07:00
Daniel Agar
c3884b5bc1
fake_imu (formally fake_gyro) updates for testing gyro filtering
...
- fake_imu now publishes sine sweeps over 10 seconds
- accel is also published so that fake IMU can be selected when the only option
2021-05-17 20:26:25 -04:00
David Sidrane
86360d076c
mro_ctrl-zero-h7: Initalize PWM as input with Pull Downs
2021-05-05 20:48:06 +02:00
Daniel Agar
58b40fbbb9
boards: move testing to dedicated test variants
2021-04-14 09:21:31 +02:00
David Sidrane
2f9a57c604
mro ctrl-zero-h7:Add remaining SRAM4 & DTCM to heap
2021-04-03 14:13:23 -04:00
Daniel Agar
6874e9fba0
boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default
...
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
2021-03-30 09:23:43 -04:00
Daniel Agar
631d1647d3
boards: minimize unnecessary differences in default variants
2021-03-28 14:46:47 -04:00
Daniel Agar
e77bffe582
boards: STM32H7 remove CONFIG_MM_REGIONS=3
2021-03-26 17:40:44 -04:00
David Sidrane
344be233cf
mro ctrl-zero-h7:Properly configure BDMA
2021-03-23 05:52:27 -07:00
David Sidrane
6780428a9d
mro ctrl-zero-h7:Enable ADC3 in support of temperature sensing
2021-03-19 15:48:47 +01:00
Ryan Johnston
bcf93304c7
Board ID Update
...
Needed for updating firmware (due to boot loader).
2021-03-16 00:51:17 -04:00
Ryan Johnston
8e6987d480
Board ID update
...
Needed for firmware to update.
2021-03-16 00:51:17 -04:00
Daniel Agar
2257c3767e
simple gyro auto calibration module
2021-03-15 09:46:47 +01:00
Daniel Agar
f8eaa6e46b
ROMFS handle bl_update generically
...
- include all available legacy bootloaders
2021-03-11 00:38:18 +01:00
Daniel Agar
4d288512b5
add board architecture specific init defaults
2021-03-09 19:59:41 +01:00
Daniel Agar
a0b9b44ff6
boards: stm32h7 set CONFIG_SDMMC1 consistently
2021-03-09 09:37:05 -05:00
Daniel Agar
19de1e57e3
gyro_fft promote to modules and include on all boards
2021-03-05 10:56:54 -05:00
Beat Küng
7e33d03470
drivers: remove tap_esc
...
- it's not used anymore
- it would need a refactoring to use mixer_module
2021-02-25 09:28:37 -05:00
Ryan Johnston
45dde177ee
Remove mkblctrl from default.cmake
...
Mkblctrl needs to be removed for the build to succeed.
2021-02-24 08:53:35 +01:00
Ryan Johnston
a1fa6a72ea
boards: MRO Control Zero H7 Board Support
2021-02-21 21:07:36 -05:00