James O'Shannessy
fa7be629e5
AutoTest: Make fence tests flake8 compliant
2021-03-05 14:52:46 +11:00
James O'Shannessy
01b27bdb61
AutoTest: revert change that breaks quadplane
2021-03-05 14:52:46 +11:00
James O'Shannessy
2353b55452
AutoTest: Address race conditions in changes to fence tests
2021-03-05 14:52:46 +11:00
James O'Shannessy
76a2a76b54
AutotTest: Adds autotests for Plane to test RetRally flag added to AC_Fence
2021-03-05 14:52:46 +11:00
James O'Shannessy
8545715837
AutoTest: Add Static Fence Tests for unallowed arming when breaching geofence
2021-03-05 14:52:46 +11:00
James O'Shannessy
6f7ba3b037
AutoTest: Ensure fence is disabled at end of throttle_failsafe_fence test
2021-03-05 14:52:46 +11:00
James O'Shannessy
6251b6eead
AutoTest: Rebase and carry across changes from autotest
2021-03-05 14:52:46 +11:00
James O'Shannessy
b2346ef6df
AutoTest: Adds additional tests to ArduCopter to test autoenable and floor
...
Adds tests for:
* Testing auto-enable disabled (when no autoenabling of the fence is required)
* Test auto-enabled always after takeoff (when takeoff complete condition met)
* Test auto-enabled disable floor only (when land sequence begins)
* Test auto- on arm/disarm (when vehicle is armed/disarmed)
* Tests ability to land when fence is breached
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
dd5ede0fe0
autotest: small comment improvements
2021-03-05 14:52:46 +11:00
James O'Shannessy
bbd606b8b5
AutoTest: Corrections to autotests
2021-03-05 14:52:46 +11:00
James O'Shannessy
a3efc9ad98
AutoTest: Fix MAVlite test allowing plane fence to be enabled
2021-03-05 14:52:46 +11:00
James O'Shannessy
47e76a1807
AutoTest: Move fence enable/disable to common location
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
528defd560
Autotest: activate the fence via a mavlink command
...
This should not be required in the future, please fix this and revert this commit
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
8d8753b14c
Autotest: fix two copter tests after parameter rename
...
I'm not sure if a better fix would be to remove the set_parameter() call
2021-03-05 14:52:46 +11:00
James O'Shannessy
215901be30
Autotest: Correct the logic for fence based autotest functions
...
Adds corrections to enabling fence using aux function.
Correctly test fences statically. Only uploaded fences can be checked using a fence file, so we check those first. Then we add steps to check tin can, max and minm all set the fence as present, as expected.
Plane will support MAV_PROTOCOL_CAPABILITY_MISSION_FENCE, so we assert that it does support it.
To test ceiling and floor, leverage some existing functions for takeoff, change altitude and land. Check for respective breach.
Add a floor breach check to copter.
2021-03-05 14:52:46 +11:00
James O'Shannessy
1a3e168ced
Autotest: Fence is present, but test looking for not present
...
Autotest: Remove ties to mavlink FENCE_ACTION
Autotest: Add ArduPlane autotest to test ceiling and floor
Adds a test to ensure the vehicle reverts to RTL when breaching a ceiling or floor.
Autotest: Progress the test once we reach takeoff complete and fence enable
Autotest: Use RC_OPTION for Aux Switch functionality
Autotest: Enable fence last
2021-03-05 14:52:46 +11:00
Paul Riseborough
d52594c576
Tools: Fix set_home autotest
...
Don't try to get home until EKF has passed alignment and GPs checks.
Use a more realistic lat/lon offset threshold
2021-03-05 12:10:01 +11:00
Peter Barker
4aed767fe9
autotest: add test for MAV_CMD_DO_SET_MISSION_CURRENT
2021-03-04 11:59:33 +11:00
Peter Barker
a235246628
autotest: correct units in new AHRS2 test
2021-03-03 18:41:14 +11:00
Pierre Kancir
ecc89411f9
Tools: put UART_chargen in skip list
2021-03-03 18:07:38 +11:00
Peter Barker
b3ee5d5f59
autotest: increase verbosity in AHRS2 test
2021-03-03 16:29:33 +11:00
Randy Mackay
a35a7e1523
Tools: autotest manual control test requires 12 deg
...
adjusted down because of lower default angle_max
2021-03-03 08:03:39 +09:00
Peter Barker
317181922c
autotest: ensure we're getting vaguely sane data in AHRS2 message
2021-03-02 20:48:36 +11:00
Peter Barker
cc83562add
autotest: tidy fence handling
2021-03-02 16:54:06 +11:00
Peter Barker
b2d4cefa85
autotest: change heli default RPM type to 10
...
Change default to SITL
2021-03-02 15:41:44 +11:00
Peter Barker
4d2cf8c95b
AP_Frsky_SPort: correct handling of RPM sensor data
...
Nails support down to just two RPM sensors for the time being.
Simplifies things (there was an issue here when I corrected RPM-in-SITL)
2021-03-02 15:41:44 +11:00
Peter Barker
eb499ff731
autotest: improve frsky SPort test
...
- reduces verbosity as we only check the remaining items when new data
received
- reduces repoll interval and explains why we need to re-poll
2021-03-02 15:41:44 +11:00
Peter Barker
7b251b6fd4
autotest: add diagnostics for frsky tests
2021-03-02 15:41:44 +11:00
Peter Barker
2671a2f71f
autotest: fix up FRSky tests for running under Valgrind
2021-03-02 15:41:44 +11:00
Peter Barker
360512f6b0
autotest: preserve commandline customisations on reboot under valgrind
2021-03-02 15:41:44 +11:00
Peter Barker
fc9a93ba67
autotest: stop using mavproxy for clearing missions
2021-03-02 14:24:36 +11:00
Peter Barker
97e2596bf8
autotest: stop clearing mission at start of test
...
These are implicitly cleared by the framework
2021-03-02 14:24:36 +11:00
Peter Barker
973510a4ff
autotest: push context after customising cmdline
...
doing things in the other order causes problems when running the
complete suite
2021-03-02 14:24:36 +11:00
Peter Barker
5d1e105534
autotest: allow more time for mission upload and download
...
We upload some rather large missions....
2021-03-02 14:24:36 +11:00
Peter Barker
10007e2e42
autotest: load missions natively rather than using MAVProxy
2021-03-02 14:24:36 +11:00
Peter Barker
993d87469c
autotest: move mission upload functions from rover to common
2021-03-02 14:24:36 +11:00
Peter Barker
34a52e9cfe
autotest: use wait_statustext in place of mavproxy.expect for autorotate test
2021-03-02 13:34:09 +11:00
Peter Barker
0daa1a63d3
autotest: remove pointless fetch_parameters call
...
And the entire method, replace with equivalent test
2021-03-01 17:27:52 +11:00
nkruzan
3e0f9ab4e7
Tools:autotest\common.py fix text typo
2021-03-01 15:15:38 +11:00
Peter Barker
61138f342a
autotest: do not time out receiving of heartbeat if running gdb
...
pausing indefinitely when running GDB is OK.
2021-03-01 13:44:23 +11:00
Peter Barker
1f47698076
autotest: use change_mode in place of mavproxy.send
2021-03-01 13:10:09 +11:00
Peter Barker
d3b3c443bc
autotest: reset copter completely after autotune test
2021-02-25 10:49:58 +11:00
Peter Barker
013415eb31
autotest: make and mark arducopter.py as flake8-compliant
2021-02-24 15:10:10 +11:00
Peter Barker
79f21ed639
autotest: add test for GSF logging
2021-02-23 12:36:33 +11:00
Peter Barker
9d681eecc4
autotest: move to state outside when we leave log structure
...
No vertical whitespace allowed in the structures...
We concatenate all of the LogStructure files; without this we remain in
state_inside and try to parse every line in the concatenation as if it
were a log structure definition
2021-02-23 12:36:33 +11:00
Peter Barker
44ec74030e
autotest: recover from flip in althold to remove stabilise throttle problem
2021-02-21 23:11:26 +11:00
Peter Barker
a4a5d52c35
autotest: extend time allowed for RTL for simplemode test
2021-02-21 22:45:06 +11:00
Peter Barker
9120882e9e
autotest: print name of open dataflash log when test exception caught
...
The stack trace is already extremely useful... but mapping back to the
relevant dataflash log is a bit of a pain.
Adding more stuff to this method in the future might be good, too.
2021-02-21 21:35:35 +11:00
Peter Barker
adf44f3b2b
autotest: make and declare sim_vehicle.py flake8-clean
2021-02-21 21:35:17 +11:00
Peter Barker
98451e499a
autotest: make and declare balancebot flake8-clean
2021-02-21 21:35:17 +11:00