Randy Mackay
|
9e91def774
|
Copter: update firmware version and release notes
|
2013-06-02 12:19:36 +09:00 |
|
Olivier-ADLER
|
735406fa77
|
Copter : POSITION_HOLD mode -> allow user position control
|
2013-06-02 11:49:18 +09:00 |
|
Olivier-ADLER
|
68470c9176
|
Copter : Land submode - Check for GPS 3D Fix instead of checking for available home position
|
2013-06-02 11:49:12 +09:00 |
|
Dr Gareth Owen
|
18e566ccc5
|
failsafe gps lost bug fix
|
2013-06-02 11:41:59 +09:00 |
|
Randy Mackay
|
b462bfed84
|
Copter: remove unused print_wp function
|
2013-06-02 11:32:38 +09:00 |
|
Dr Gareth Owen
|
4c6d6ea96e
|
changed yaw reset to when armed to not use initial_simple_bearing
|
2013-06-02 11:29:30 +09:00 |
|
Dr Gareth Owen
|
79bd8b4fd0
|
rtl resets yaw to same as when armed - unless user specifies otherwise
|
2013-06-02 11:29:27 +09:00 |
|
Randy Mackay
|
0460147a15
|
Copter: guided mode yaw fix
Nose of copter now points at next guided point if it is more than 10m
away
|
2013-06-02 11:25:35 +09:00 |
|
Randy Mackay
|
5203ba9fe3
|
Copter: alt hold feed forward filter
|
2013-06-01 21:13:47 +09:00 |
|
Randy Mackay
|
99f5462a03
|
Copter: circle mode fixes
|
2013-06-01 18:21:30 +09:00 |
|
Randy Mackay
|
e3cd494709
|
Copter: remove debug message
|
2013-06-01 18:21:30 +09:00 |
|
Randy Mackay
|
23ce35d292
|
Copter: remove unused NAV_WP_INAV #define
|
2013-06-01 18:21:28 +09:00 |
|
Randy Mackay
|
5e2fc32410
|
Copter: remove unused cli wp report
|
2013-05-31 21:04:27 +09:00 |
|
Randy Mackay
|
1722e438d8
|
Copter: pass alt hold gain to WP_Nav library
|
2013-05-31 21:04:10 +09:00 |
|
Randy Mackay
|
d875e95da3
|
Copter: remove nav and wp tests from cli
This are more fully tested in the autotester
|
2013-05-31 15:23:39 +09:00 |
|
Randy Mackay
|
ae91c4a237
|
Copter: alphabetise order of cli test menu
|
2013-05-31 15:16:06 +09:00 |
|
Randy Mackay
|
e2495b7a49
|
Copter: alphabetise order of cli setup menu
|
2013-05-31 15:16:06 +09:00 |
|
Randy Mackay
|
a0c8bf238e
|
Copter: move motors test to test menu
Also allow test to be run from mission planner's cli window
|
2013-05-31 15:16:05 +09:00 |
|
Randy Mackay
|
1807840d4f
|
Copter: fixed comments re mag field pre-arm check
|
2013-05-31 12:28:04 +09:00 |
|
Randy Mackay
|
7b50ecc73c
|
Copter: pre-arm check for mag field length
|
2013-05-31 12:23:19 +09:00 |
|
Randy Mackay
|
a1821c89e7
|
Copter: pre-arm check for board voltage < 5.8V
|
2013-05-31 11:31:27 +09:00 |
|
Randy Mackay
|
c6e383be0f
|
Copter: disable board voltage pre-arm check for PX4
|
2013-05-31 11:27:54 +09:00 |
|
Andrew Tridgell
|
2488c4fdc3
|
Copter: update docs on volt/current pin
|
2013-05-31 07:57:15 +10:00 |
|
Dr Gareth Owen
|
f175111243
|
added GPS check before mode change. New mode_requires_gps() function.
|
2013-05-30 20:33:15 +09:00 |
|
Andrew Tridgell
|
0e31a2f582
|
Copter: fixed indent-tabs-mode
|
2013-05-30 09:55:51 +10:00 |
|
Andrew Tridgell
|
30df8796ce
|
Copter: fixed loading of waypoints
copter code assumes that command_total includes the home waypoint
|
2013-05-29 21:44:08 +10:00 |
|
Andrew Tridgell
|
903d5636bb
|
Copter: added support for partial mission load
this allows individual waypoints to be updated in missions
|
2013-05-29 16:25:05 +10:00 |
|
Randy Mackay
|
c3d21a457f
|
Copter: add pre-arm board voltage check
Copter will not arm unless board voltage is over 4.5V
|
2013-05-28 21:50:31 +09:00 |
|
Randy Mackay
|
6ecd2d74a3
|
Copter: beep twice during arming
|
2013-05-27 13:55:34 +09:00 |
|
Randy Mackay
|
cdcf442f55
|
Copter: enable GPS failsafe by default
|
2013-05-27 11:25:37 +09:00 |
|
Randy Mackay
|
ec7ee47099
|
Copter: scaling stability patch
|
2013-05-27 11:21:31 +09:00 |
|
Randy Mackay
|
838fb3f4e2
|
Copter: don't spin motors in ALTHOLD with zero throttle
|
2013-05-27 10:42:22 +09:00 |
|
Randy Mackay
|
4fa101292a
|
Copter: add baro health to pre-arm checks
|
2013-05-25 12:24:47 +09:00 |
|
Randy Mackay
|
d1791bab76
|
Copter: fix barometer cli test
|
2013-05-25 12:21:29 +09:00 |
|
Dr Gareth Owen
|
1aca66460e
|
7 yaw when armed option changed so overridable by user
|
2013-05-24 11:14:06 +09:00 |
|
Randy Mackay
|
967aa81e9b
|
Copter: add XL-EZ4 to SONAR_TYPE parameter description
|
2013-05-23 09:46:57 +09:00 |
|
Randy Mackay
|
22e9b95c3c
|
Copter: version update to 3.0.0-rc3
|
2013-05-22 17:46:28 +09:00 |
|
Randy Mackay
|
72f29bd0db
|
Copter: remove debug message from compassmot
|
2013-05-22 11:30:30 +09:00 |
|
Randy Mackay
|
c404c46e5a
|
Copter: add Fence to CH7/CH8 param description
|
2013-05-21 16:31:16 +09:00 |
|
Andrew Tridgell
|
4508e645f1
|
Copter: fixed parameters to pass new script
|
2013-05-21 17:02:13 +10:00 |
|
Randy Mackay
|
bb3073fab1
|
Copter: minor parameter description fixes
|
2013-05-21 15:56:09 +09:00 |
|
Randy Mackay
|
5ee68db6f0
|
TradHeli: add parameter descriptions
small formatting changes too
|
2013-05-21 15:33:41 +09:00 |
|
Randy Mackay
|
9139fb54ac
|
Copter: param update for AP_Baro and AP_Scheduler
|
2013-05-21 14:22:11 +09:00 |
|
Randy Mackay
|
00bd1bf8ea
|
Copter: RESETTOARMEDYAW order and comments
We should keep the order in the case statement the same as the #define
order.
|
2013-05-21 10:58:34 +09:00 |
|
Dr Gareth Owen
|
f646b79e5f
|
indent correct again
|
2013-05-21 10:40:36 +09:00 |
|
Dr Gareth Owen
|
d9fc37c01c
|
indent correct
|
2013-05-21 10:40:34 +09:00 |
|
Dr Gareth Owen
|
e9d640ced8
|
added ch7 option to reset yaw back to what it was when quad was armed
|
2013-05-21 10:40:30 +09:00 |
|
Randy Mackay
|
db552adf02
|
Copter: typo in LOG_BITMASK param description
|
2013-05-21 10:30:59 +09:00 |
|
Randy Mackay
|
669850e6d4
|
Copter: add parameter description for LOG_BITMASK
Should allow a dropdown in the GCS so it can be set more easily without
going into the cli
|
2013-05-21 10:29:40 +09:00 |
|
Randy Mackay
|
bd44c2f73d
|
Copter: all pre-arm checks to be disabled
set ARMING_CHECK parameter to zero to disable
|
2013-05-20 14:48:04 +09:00 |
|